Análise e avaliação dos elementos de penetração no solo de equipamentos rodoviários após revestimento

The main objective is to analyze the abrasive wear resistance to the low stress of the elements that make up the organs of road machinery that are exposed directly to contact with abrasives. These samples were analyzed after these elements are coated superficially by the process of welding electrode coated with (SAER) and the manual process of coating type LVOF thermal spraying. As well, is to provide suggestions for a better recovery and return of these elements, which are reducing costs and avoiding downtime in the fronts of service. The samples were made from a substrate of carbon ABNT 1045 tempered steel, following the same specifications and composition of metals and alloys of constituents was followed the standard governing the dimensions of these samples and in accordance with the corresponding size. The results were evaluated by testing the hardness, abrasion resistance to wear by the low stress and the loss of volume involving the microstructure of coatings analyzed

Estudo da incorporação de cascalho proveniente da perfuração de poços de petróleo em formulações para tijolos de solo-cimento

The present work is to study the characteristics and technological properties of soil-cement bricks made from binary and ternary mixtures of Portland cement, sand, water, with or without addition of gravel from the drilling of oil wells, which could be used by industry, aiming to improve its performance and reduce cost by using the residue and, consequently, increasing its useful life. The soil-cement bricks are one of the alternatives to masonry construction. These elements, after a short curing period, provide compressive strength similar to that of solid bricks and ceramic blocks, and the higher the resistance the higher the amount of cement used. We used the soil from the city of São José do Mipibu / RN, the banks of the River Baldun, cement CPIIZ-32 and residue of drill cuttings from oil wells drilling onshore wells in the town of Mossley, RN, provided Petrobras. To determine the optimum mix, we studied the inclusion of different residues (100%, 80%, 70%, 60% and 50%) where 15 bodies were made of the test piece. The assessment was made of bricks made from simple compression tests, mass loss by immersion and water absorption. The experimental results proved the efficiency and high utilization of the waste from the drilling of oil wells, making the brick-cement-soil residue with a higher strength and lower water absorption. The best result in terms of mechanical strength and water absorption for the ternary mixture was 10% soil, 14% cement and 80% residue. In terms of binary mixtures, we obtained the best result for the mix-cement residue, which was 14% cement incorporated in the residue

Estudo da incorporação da cal em composições binárias de solo-cimento para produção de tijolos maciços

The use of binders in the soil for the production of solid bricks is an old construction technique that has been used by several civilizations over time. At the same time, the need for environmental preservation and the tendency of scarcity of natural resources make the construction invest in researching new concepts, methods and materials for building systems for the sustainability of their economic activities. Thus arises the need to obtain building materials with low power consumption, capable of reducing the growing housing shortage of rural and urban population. Currently, research has been conducted on this topic to better understand the cementitious and pozzolanic reactions that occur in the formation of the microstructure of the soil-cement when added to other materials such as, for example, lime, and the relationship between microstructure and formed interfaces with the physical, mechanical and chemical analysis in compounds made from these ternary compositions. In this context, this study aimed to analyze the results of the influence of the incorporation of lime to the soil-cement to form a ternary mixture to produce soil-cement bricks and mortar without structural purposes. From the inclusion of contents of 6 %, 8 %, 10% and 12% lime to the soil, and soil-cement mixes in amounts of 2 %, 3 %, 4 % and 5 % were shaped-bodies of -cylindrical specimens to determine the optimum moisture content and maximum dry apparent specific weight. Then they were cured, and subjected to the tests of compressive strength, absorption and durability modified. Compositions obtained the best results in the tests performed on the bodies-of-proof cylindrical served as a parameter for molding of solid bricks, which underwent the same experimental methodology previously cited. The raw materials used, as well as compositions in which the bricks were molded solid, were characterized by physical and chemical tests, X-ray diffraction and scanning electron microscopy. The results obtained in the study indicate that the compositions studied, that showed the best results in terms of compressive strength, water absorption and durability ternary composition was soil, 10 % cement and 2 % lime

Avaliação da correlação entre os parâmetros, carbono orgânico total e elementos tóxicos, em solo de um posto de serviço e revenda de combustíveis

Today a major responsibility for the contamination of soil and groundwater and surface water are establishments known as gas stations of fuel which has attracted increasing attention from both the general population as the state agencies of environmental control due to leaks in storage tanks and mainly to disruption of pipe corrosion of tanks and pumping. Other services, like oil changes and car wash are also causes for concern in this type of establishment. These leaks can cause or waste produced, and the contamination of aquifers, serious health problems and public safety, since most of these stations located in urban areas. Based on this, the work was to evaluate soil contamination of a particular service station and fuel sales in the city of Natal, through the quantification of heavy metals like Cd, Cu, Cr, Ni, Pb, Zn of total organic carbon (TOC) and organic matter using different techniques such as optical emission spectrometry with inductively coupled plasma source (ICP OES), Total Organic Carbon analyzer and gravimetric analysis respectively. And also to characterize the soil through particle size analysis. Samples were taken in 21 georeferenced points and collected in the same period. The soils sampled in sampling stations P3, P5, P6, P10, P11, P12, P13, P14, P15, P17, P18 and P20 showed the smallest size fractions ranging from fine sand to medium sand. The other study sites ranged from fine sand to medium sand, except the point P8 showed that only the type size medium sand and P19, indicating a particle size of the coarse type. The small correlation of organic matter with the elements studied in this work suggests that these are not of anthropogenic origin but geochemical support

Avaliação de HPA e BTEX no solo e água subterrânea, em postos de revenda de combustíveis: estudo de caso na cidade de Natal -RN

The retail fuel stations are partially or potentially polluters and generators of environmental accidents, potentially causing contamination of underground and surface water bodies, soil and air. Leaks in fuel retail stations´ underground storage systems are often detected in Brazil and around the world. Monoaromatic hydrocarbons, BTEX (benzene, toluene, ethylbenzene and xylenes) and polycyclic aromatic hydrocarbons (PAHs) are an indication of the presence of contamination due to its high toxicity. This paper presents a case study of contamination in a Fuel Retail Station by petroleum derivative products in the city of Natal. For identification and quantification of the hydrocarbons, EPA analytical methods were used. The values of benzene quantified by EPA method 8021b CG-PID/FID, ranged from 1.164 to 4.503 mg.Kg-1 in soil samples, and from 12.10 to 27,639 μg.L-1 in underground water samples. Among the PAHs, naphthalene and anthracene showed the most significant results in soil samples, 0.420 to 15.46 mg.Kg-1 and 0.110 to 0,970 mg.Kg-1, respectively. In underground water samples, the results for Naphthalene varied between 0.759 and 614.7 μg.L-1. PAHs were quantified by EPA Method 8270 for GCMS. All of the results for the chemical analysis were compared with the values for the CONAMA 420/2009 resolution. The results for benzene (27,639 μg.L-1) showed levels highly above the recommended by the CONAMA 420 resolution, wherein the maximum permissible for underground water is 5 μg.L-1. This is a worrying factor, since underground water makes up 70% of the city of Natal´s water supply

Arthropoda de solo em um ecossistema semi-árido da região neotropical: composição, variabilidade temporal e estratificação

Caatinga is an important laboratory for studies about arthropods adaptations and aclimatations because its precipitation is highly variable in time. We studied the effects of time variability over the composition of Arthropods in a caatinga area. The study was carried out at a preservation area on Almas Farm, São José dos Cordeiros, Paraíba. Samples were collected in two 100 m long parallel transects, separated for a 30 m distance, in a dense tree dominated caatinga area, between August 2007 and July 2008. Samples were collected in each transect every 10 m. Ten soil samples were taken from each transect, both at 0-5 cm (A) and 5-10 cm (B) depth, resulting in 40 samples each month. The Berlese funnel method was used for fauna extraction. We registered 26 orders and the arthropods density in the soil ranged from 3237 to 22774 individuals.m-2 from January 2007 to March 2008, respectively. There was no difference between layers A and B regarding orders abundance and richness. The groups recorded include groups with few records or that had no records in the Caatinga region yet as Pauropoda, Psocoptera, Thysanoptera, Protura and Araneae. Acari was the most abundant group, with 66,7% of the total number of individuals. Soil Arthropods presented a positive correlation with soil moisture, vegetal cover, precipitation and real evapotranspiration. Increases in fauna richness and abundance were registered in February, a month after the beginning of the rainy season. A periodic rain events in arid and semiarid ecosystems triggers physiological responses in edafic organisms, like arthropods. Edafic arthropods respond to time variability in the Caatinga biome. This fauna variation has to be considered in studies of this ecosystem, because the variation of Arthropods composition in soil can affect the dynamics of the food web through time

Resistência do solo à penetração e ao cisalhamento em diversos usos do solo em áreas de preservação permanente

The soil resistance to penetration and shear can be used as indicators of soil compaction and to indicate the susceptibility of a soil to erosion. The objective of this study was to quantify and compare the impact provided by different land uses in a haplic cambissol in areas of permanent preservation, from the soil resistance to penetration and shear. The experimental area was located in an area of permanent preservation, the sub-basin of the Ribeira Iguape River - SP, with different land uses: banana cultivation - CBAN, degraded pasture - PDEG, silvopastoral system - MPIS and native forest - MNAT. The test for resistance to penetration was accomplished with a digital penetrometer compaction of manual effort, to a depth of 40 cm. The soil shear strength was determined by Vane Test at a depth between 0 and 5 cm. The degraded pasture was similar to native forest, with less resistance to penetration. The banana cultivation and silvopastoral system were the land uses with the highest resistance to penetration, bringing serious risk of erosion in areas of permanent preservation. The soil under native forest had lower shear strength. The cultivation of bananas, degraded pasture and silvopastoral system were the land uses with higher shear strength of soil, indicating that the use of these soils in areas of permanent preservation is promoting the same compression.

Custos e rentabilidade da produção de juvenis de tilápia-do-nilo em tanques-rede utilizando-se diferentes densidades de estocagem

Neste trabalho foi realizada a análise econômica da produção de juvenis de tilápia-do-nilo em tanques-rede utilizando-se diferentes densidades de estocagem. O experimento foi desenvolvido em área aquícola, em delineamento de blocos casualizados, com quatro densidades de estocagem (100, 200, 300 e 400 peixes m-3), avaliadas com seis repetições, em dois períodos de criação: de março a abril de 2005 (52 dias - peso inicial de 43,08 ± 2,98 g e peso final de 262,14 ± 47,86 g) e de março a abril de 2006 (58 dias - peso inicial de 43,16 ± 5,34 g e peso final 314,24 ± 73,30 g). Foram avaliadas as seguintes variáveis econômicas: custo da ração mais custo do juvenil dividido pela biomassa, em R$ kg-1; porcentagem do custo da ração por quilo de peixe produzido sobre o preço de venda; porcentagem do custo do juvenil por quilo de peixe produzido sobre o preço de venda e; porcentagem dos custos da ração mais do juvenil por quilo de peixe produzido sobre o preço de venda. da menor densidade de estocagem (100) para a maior (400), ocorreu diminuição no ganho de peso diário e elevação do índice de conversão alimentar aparente, mas essa redução não comprometeu a taxa de sobrevivência. Entretanto, o ganho de biomassa aumentou com o adensamento de peixes. As maiores receitas líquidas foram obtidas nas densidades de estocagem de 100 e 200 peixes m-3. Os preços não remuneraram os custos operacionais (efetivo e total) em maiores densidades (300 e 400 peixes m-3). Os melhores resultados para a produção de juvenis de tilápia-do-nilo foram obtidos com densidades de até 200 peixes m-3.

Transporte de juvenis de curimbatá Prochilodus lineatus em diferentes densidades

Transportation of curimbata Prochilodus lineatus juveniles in different densities. Tins study evaluated the effects of curimbata Prochilodus lineatus transportation in three densities (100, 150 and 250 g L-1) on survival, metabolic, ionic and hematological (red series) variables Curimbata juveniles were transported in plastic bag during six hours, and sampled before packing, immediately after die arrival, 24 and 96 hours after transportation During recovery, higher mortality was seen in fish transported in die highest density Water variables, such as conductivity and total ammonia, presented increased values as density increased (p < 005). whereas the opposite occurred with dissolved oxygen Glucose level observed in the arrival was high, significantly reducing after 96 hours Among ionic variables, chloride decreased in higher fish densities and according to sampling times Red series hematological variables, such as hematocrit, red blood cell and hemoglobin, Increased in arrival, but diminished 96 hours after transportation There were no significant differences in the interaction between density and time of sampling for mentioned variables 250 g L-1 density induced the highest mortality rate and the worst variables values measured 96 hours of recovery after the stressing event was enough to return to initial values for hematological variables, but was not sufficient to return to initial values for metabolic and ionic variables.

Avaliação dos teores de metais pesados no solo e na planta de cana-de-açúcar sob adubação com lodo de esgoto e vinhaça

The objective of this work was to evaluate Cd, Cr, Ni and Pb total contents in soil and sugar cane after four annual applications of sewage sludge and vinasse to supply all N and all K required by the crop. A field experiment was carried out on clayey Typic Haplustox. It was used a randomized block design with seven treatments and three replications. The treatments consisted in: (i) rate of sewage sludge to supply 100% of the N required by the crop; (ii) rate of sewage sludge to supply 200% of the N required; (iii) rate of vinasse to supply 100% of the K required; (iv) rate of vinasse to supply 200% of the K required; ( v) combination of the treatments ( i) and ( iii); ( vi) combination of the treatments ( ii) e ( iv); (vii) control ( mineral fertilization). The contents of Cd, Cr, Ni and Pb in sewage sludge reached maximum values of 1.58, 41.66, 35.17 and 45.25 mg kg(-1), respectively. These metals were not detected in vinasse. The residues were applied annually for four years. At the end of this period, sewage sludge and vinasse accumulated rates, that get up to 51 t ha(-1) and 762 m(3) ha(-1), respectively, did not cause alteration in Cd, Cr, Ni and Pb total contents in soil, up to 50 cm of depth, and in plant. Sewage sludge and vinasse application to supply N and K for sugar cane did not offer soil pollution risk by heavy metals.

Efeitos da calagem do solo no crescimento inicial e absorção de macronutrientes por plantas de trapoeraba (Commelina benghalensis)

A presente pesquisa foi conduzida visando estudar os efeitos da calagem do solo sobre o crescimento inicial e absorção de macronutrientes por plantas de trapoeraba (Commelina benghalensis L.). A fase experimental foi conduzida em casa de vegetação, em vasos de cinco litros e o substrato foi coletado na camada arável de um Latossolo Vermelho Escuro, distrófico, classe textural franco-argilo-arenosa e valor original de pH igual a 3,8. O experimento foi instalado no delineamento inteiramente casualizado com quatro repetições e os tratamentos constaram da incorporação de quantidades correspondentes às doses 0, I, 2, 3, 4 e 5 t/ha de calcário dolomítico calcinado. Foi efetuada uma incubação por 15 dias antes do plantio das mudas da trapoeraba. Os resultados foram avaliados 49 dias após o transplante. A planta daninha respondeu intensamente à calagem incrementando a área foliar e os acúmulos de matéria seca e de N, P, Ca, Mg e S. Os padrões de distribuição dos diferentes macronutrientes nas diversas estruturas morfológicas da planta foram alterados. O acúmulo de K cresceu até a dose de 2 t/ha de calcário e depois decresceu, possivelmente devido ao antagonismo com Mg, adicionado através do calcário.

Efeitos da adubação fosfatada nas relações de interferência inicial entre plantas de milho (Zea mays) e de tiririca (Cyperus rotundus)

O objetivo deste trabalho foi avaliar os efeitos da adubação fosfatada nas relações de interferência inicial entre plantas de milho e de tiririca. Para isso, foi montado um experimento em vasos de 90 L, preenchidos com substrato constituído por areia, terra e substrato Plantmax®. Os tratamentos constaram de combinações de colonização dos vasos por milho e/ou por tiririca nas densidades iniciais de 25 e 50 tubérculos por vaso; essas situações de colonização foram estabelecidas em três condições de adubação fosfatada adicional: 0, 100 e 300 ppm de fósforo. No campo, os vasos foram dispostos no delineamento inteiramente casualizado, com quatro repetições. As relações de interferência entre plantas de milho e de tiririca foram alteradas pela fertilização fosfatada do solo. O milho teve excelente aproveitamento do enriquecimento do solo pelo fósforo e interferiu mais decisivamente sobre a tiririca nos vasos bem fertilizados com esse elemento. Nessas condições, o milho reduziu drasticamente a resposta da tiririca à fertilização fosfatada, em termos de crescimento da parte aérea. A interferência da tiririca reduziu a altura das plantas de milho, a expansão da área foliar e o acúmulo de matéria seca na parte aérea.

Sourgrass densities affecting the initial growth and macronutrient content of coffee plants

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Efeitos da solarização do solo através de plástico transparente sobre o desenvolvimento da tiririca (Cyperus rotundus)

Um ensaio foi conduzido em condições de campo, durante o verão, com o objetivo de avaliar o potencial da técnica de solarização do solo no controle da tiririca (Cyperus rotundus L.). O delineamento experimental utilizado foi o de blocos casualizados com três repetições, e os tratamentos num esquema fatorial 2 x 2 x 3, sendo duas situações de cobertura (com e sem plástico transparente de 300 mm de espessura), dois estádios de desenvolvimento da planta daninha (vegetativo e florescimento) e três períodos de cobertura com plástico (15, 30 e 60 dias). A temperatura do solo sob solarização teve um aumento médio de 4,3oC em relação à testemunha, atingindo valores superiores a 50oC em determinados horários. Observou-se, também, um acúmulo da ordem de 400 % nos teores de CO2 na atmosfera do solo solarizado. Nessas condições houve inibição da brotação dos tubérculos e diminuição no peso de matéria seca de todas as partes estudadas da planta. Houve redução da taxa de multiplicação dos tubérculos, reduzindo-a de 1:11 para 1:4, quando coberta no estádio vegetativo e para 1:9 quando a cobertura se realizou no estádio de florescimento. Houve, ainda diminuição na ordem de 20% na viabilidade dos tubérculos remanescentes.

Influência da disponibilidade hídrica e da acidez do solo no teor de prolina livre de guandu

O objetivo deste trabalho foi avaliar a influência da disponibilidade hídrica e da acidez do solo, no teor de prolina livre da parte aérea das cultivares de guandu, IAPAR 43-Aratã e IAC Fava Larga. O delineamento experimental utilizado foi o inteiramente casualizado, em arranjo fatorial 2x3x4 (cultivar x disponibilidade hídrica x acidez), com quatro repetições. em condições de restrição hídrica severa, a cultivar IAC Fava Larga pode ser considerada tolerante, em virtude do maior acúmulo de prolina livre. A presença de alumínio no solo, associada à restrição hídrica severa, apresentou efeito sinergístico sobre os teores de prolina livre.