A weight loss protocol and owners participation in the treatment of canine obesity

O sucesso de um programa de perda de peso para animais de estimação depende da colaboração do proprietário. A adesão deste é fundamental para a correta instituição do manejo alimentar do paciente. Este trabalho teve por objetivo comparar a efetividade de um programa de perda de peso em dois grupos de cães, um mantido sob condições experimentais e outro com seus proprietários. Empregou-se a mesma ração hipocalórica para todos os animais. A quantidade fornecida foi restrita a 60% da necessidade energética de manutenção estimada para o peso corporal meta, definido como o peso autal reduzido em 15%. Os animais foram acompanhados durante 90 dias. Por meio de um questionário padronizado, estudou-se a percepção dos proprietários quanto à obesidade e seu tratamento. Verificou-se que o protocolo e a dieta empregados foram eficazes. Os animais controle apresentaram uma perda de peso média de 1,39% por semana. Os cães de proprietário perderam, em média, 0,75% do peso vivo por semana, resultado estatisticamente menor (P<0,05), o que sugere uma indisponibilidade dos mesmos em cumprir rigorosamente o tratamento. Mesmo com esta perda de peso modesta, foi perceptível a satisfação dos proprietários com os resultados obtidos. O uso de questionários demonstrou ser uma ferramenta importante na investigação das causas e no acompanhamento do tratamento da obesidade canina.

Potassium cycling in a corn-brachiaria cropping system

Growing corn mixed with forage crops can be an alternative for pasture and Mulch production during relatively dry winters in tropical areas, making no-till feasible in some regions. However, little is known about nutrient dynamics in this cropping system. The objective of the present work was to evaluate K dynamics in a production system in which corn was either grown as a sole crop or mixed with Brachiaria brizantha. In the second year of the experiment, nitrogen rates ranging from 0 to 200 kg ha(-1) were applied to the system. Dry matter yields and potassium contents in the soil, as well as residues and plants were determined at corn planting and harvest. Potassium balance in the system was calculated. Corn grain yield in mixed crop responded up to 200 kg ha(-1) N. The introduction of brachiaria in the system resulted in higher amounts of straw on the soil Surface and higher K recycling. Soil exchangeable K balance showed an excess K for both N rates only in the mixed system, however, when non-exchangeable K was also included in calculations, excess K was found in both mixed and sole corn systems. Large amounts of non-exchangeable K were taken up in the system involving brachiaria, which showed a considerable capacity in recycling K, increasing its contents in the surface soil layer. (c) 2008 Elsevier B.V. All rights reserved.

Characteristics of family nucleus as correlates of regular participation in sports among adolescents

Objectives To estimate the relationship between family nucleus and sport practice among adolescents.Methods A school-based cross-sectional study carried out with 1,752 Brazilian adolescents (812 male and 940 female), aged 11-17 years. Characteristics of the family nucleus (parental education, socioeconomic status and number of siblings) and sport practice (>= 240 min/week) were assessed by questionnaires. Adjusted prevalence ratios were estimated using Poisson regression models.Results The overall prevalence of sport practice was 14.8% (boys 21.2% and girls 9.4%, P = 0.001). Higher socioeconomic status, number of siblings and parents' educational level were associated with more sport practice.Conclusion Despite the low engagement, family nucleus plays an essential role in the sport practice of our sample of Brazilian adolescents.

Correlation of microcrack fracture size with fatigue cycling on non-crimp fabric/RTM6 composite in the uniaxial fatigue test

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Assessment of cumulative damage by using ultrasonic C-scan on carbon fiber/epoxy composites under thermal cycling

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Motivation and frustration in cardiology trial participation: The patient perspective

OBJECTIVE: The participation of humans in clinical cardiology trials remains essential, but little is known regarding participant perceptions of such studies. We examined the factors that motivated participation in such studies, as well as those that led to participant frustration.METHODS: Patients who had participated in hypertension and coronary arterial disease (phases II, III, and IV) clinical trials were invited to answer a questionnaire. They were divided into two groups: Group I, which included participants in placebo-controlled clinical trials after randomization, and Group II, which included participants in clinical trials in which the tested treatment was compared to another drug after randomization and in which a placebo was used in the washout period.RESULTS: Eighty patients (47 patients in Group I and 33 patients in Group II) with different socio-demographic characteristics were interviewed. Approximately 60% of the patients were motivated to participate in the trial with the expectation of personal benefit. Nine participants (11.2%) expressed the desire to withdraw, which was due to their perception of risk during the testing in the clinical trial (Group I) and to the necessity of repeated returns to the institution (Group II). However, the patients did not withdraw due to fear of termination of hospital treatment.CONCLUSIONS: Although this study had a small patient sample, the possibility of receiving a benefit from the new tested treatment was consistently reported as a motivation to participate in the trials.

The impact of physical exercise on the gastrointestinal tract

Purpose of reviewPhysical exercise can be both beneficial and harmful for the gastrointestinal tract in a dose-effect relationship between its intensity and health. Mild-to-moderate intensity exercises play a protective role against colon cancer, diverticular disease, cholelithiasis and constipation, whereas acute strenuous exercise may provoke heartburn, nausea, vomiting, abdominal pain, diarrhea and even gastrointestinal bleeding. This review focuses on mechanisms involved in those symptoms and their associations with type of exercises in humans.Recent findingsOne quarter to one half of elite athletes are hampered by the gastrointestinal symptoms that may deter them from participation in training and competitive events. Vigorous exercise-induced gastrointestinal symptoms are often attributed to altered motility, mechanical factor or altered neuroimmunoendocrine secretions. Training, lifestyle modifications, meal composition, adequate hydration and avoidance of excessive use of some medications are the recommendations.SummaryStrenuous exercise and dehydrated states would be the causes of gastrointestinal symptoms referred by 70% of the athletes. Gut ischemia would be the main cause of nausea, vomiting, abdominal pain and (bloody) diarrhea. The frequency is almost twice as high during running than during other endurance sports as cycling or swimming and 1.5-3.0 times higher in the elite athletes than the recreational exercisers.

Effect of pH variations in a cycling model on the properties of restorative materials

This study evaluated the effect of cycling various pH demineralizing solutions on the surface hardness, fluoride release and surface properties of restorative materials (Ketac-Fil Plus, Vitremer, Fuji II LC, Freedom and Fluorofil). Thirty specimens of each material were made and the surface hardness measured. The specimens were randomized into five groups according to the pH (4.3; 4.6; 5.0; 5.5 and 6.2) of the demineralizing solution. The specimens were submitted to pH-cycling for 15 days. The specimens remained in the demineralizing solution for six hours and in the remineralizing solution for 18 hours. Then, the surface hardness (SH) was remeasured and the surface properties were assessed. Fluoride release was determined daily. Data from SH and the percentage of alteration in surface hardness were analyzed by analysis of variance (p < 0.05); the Kruskal-Wallis test was performed for the fluoride release results. When hardness was compared, the variation in pH led to a positive correlation for glass ionomer cements and a negative correlation for fluoride release. For polyacid-modified resin composites, a negative correlation was found with regards to fluoride release; no significant correlation was observed for hardness. Surface properties were influenced: an acidic pH led to a greater alteration, except for polyacid-modified resin composites. The pH of the demineralizing solution influenced fluoride release from the tested materials. The pH variation altered hardness and surface properties of glass ionomer cements but did not influence polyacid-modified resin composites.

pH-cycling Model to Verify the Efficacy of Fluoride-releasing Materials in Enamel Demineralization

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Evaluation of the Effect of Retightening and Mechanical Cycling on Preload Maintenance of Retention Screws

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The Effect of Mechanical Cycling and Different Misfit Levels on Vicker's Microhardness of Retention Screws for Single Implant-Supported Prostheses

Purpose: The aim of this study was to evaluate the effect of mechanical cycling and different misfit levels on Vicker's microhardness of retention screws for single implant-supported prostheses.Materials and Methods: Premachined UCLA abutments were cast with cobalt-chromium alloy to obtain 48 crowns divided into four groups (n = 12). The crowns presented no misfit in group A (control group) and unilateral misfits of 50 mu m, 100 mu m, and 200 mu m in groups B, C, and D, respectively. The crowns were screwed to external hexagon implants with titanium retention screws (torque of 30 N/cm), and the sets were submitted to three different periods of mechanical cycling: 2 x 10(4), 5 x 10(4), and 1 x 10(6) cycles. Screw microhardness values were measured before and after each cycling period. Data were evaluated by two-way ANOVA and Tukey's test (p < 0.05).Results: Mechanical cycling statistically reduced microhardness values of retention screws regardless of cycling periods and groups. In groups A, B, and C, initial microhardness values were statistically different from final microhardness values (p < 0.05). There was no statistically significant difference for initial screw microhardness values (p > 0.05) among the groups; however, when the groups were compared after mechanical cycling, a statistically significant difference was observed between groups B and D (p < 0.05).Conclusions: Mechanical cycling reduced the Vicker's microhardness values of the retention screws of all groups. The crowns with the highest misfit level presented the highest Vicker's microhardness values.

Effect of prolonged erosive pH cycling on different restorative materials

This in vitro study evaluated the effect of a prolonged erosive pH cycling on the superficial microhardness change (SMHC) and the erosive wear of different restorative materials. Eighty enamel specimens with prepared cavities of 1.5 x 1.5 mm were randomly divided into eight groups according to the restorative materials used for the fillings (RMGI - resin-modified glass-ionomer, CGI - conventional glass-ionomer, CR- composite resin, A - amalgam) and immersion media used (ERO - erosive medium or SAL - artificial saliva). During 35 days, half of the specimens were immersed in a cola drink (ERO), for 5 min, three times a day, and they remained in SAL between the erosive cycles. The other half of the specimens was immersed in SAL only, for the entire experimental period (control). Data were tested for significant differences by anova and Tukey's tests (P < 0.05). Scanning electron microscopy images were made to illustrate the enamel erosive wear and restorative materials alterations. The mean SMHC (%) and mean erosive wear (mu m) of the materials were: RMGI-ERO (30/0.5); CGI-ERO (37/0.5); CR-ERO (-0.3/0.3); A-ERO (-4/0.3); RMGI-SAL (4/0.4); CGI-SAL (-6/0.4); CR-SAL (-3/0.2) and A-SAL (2/0.4). Scanning electron microscopy images showed pronounced enamel erosive wear on groups submitted to erosive pH cycling when compared with groups maintained in saliva. In conclusion, the prolonged pH cycling promoted significantly higher alterations (SMHC and erosive wear) on the glass-ionomer cements than the CR and amalgam.

Effect of erosive pH cycling on different restorative materials and on enamel restored with these materials

This in vitro study evaluated the effect of erosive pH cycling on the percentage of surface micro-hardness change (%SMHC) and wear of different restorative materials and bovine enamel restored with these materials. Eighty enamel specimens were randomly divided into eight groups according to the restorative materials and immersion media used: GI/GV-resin-modifled glass-ionomer, GII/GVI-conventional glass-ionomer, GIII/GVII-resin composite and GIV/GVIII-amalgam. Over a period of seven days, groups GI to GIV were immersed in a cola drink (ERO) for 5 minutes, 3x/day and kept in artificial saliva between erosive cycles. Groups GV to GVIII were immersed in artificial saliva (SAL) throughout the entire experimental period (control). Data were tested for significant differences using ANOVA and Tukey's tests (p < 0.05). For %SMHC, considering the restorative materials, no significant differences were detected among the materials and immersion media. Mean wear was higher for the resin modified glass ionomer cement when compared to conventional cement, but those materials did not significantly differ from the others. For enamel analyses, erosive pH cycling promoted higher wear and %SMHC compared to saliva. There were no significant differences in wear and %SMHC of enamel around the different restorative materials, regardless of the distance from the restorative material (50, 150 or 300 mu m). In conclusion, there were only subtle differences among the materials, and these differences were not able to protect the surrounding enamel from erosion.

pH-cycling models for in vitro evaluation of the efficacy of fluoridated dentifrices for caries control: strengths and limitations

Despite a plethora of in situ studies and clinical trials evaluating the efficacy of fluoridated dentifrices on caries control, in vitro pH cycling models are still broadly used because they mimic the dynamics of mineral loss and gain involved in caries formation. This paper critically reviews the current literature on existing pH-cycling models for the in vitro evaluation of the efficacy of fluoridated dentifrices for caries control, focusing on their strengths and limitations. A search was undertaken in the MEDLINE electronic journal database using the keywords "pH-cycling", "demineralization", "remineralization", "in vitro", "fluoride", "dentifrice". The primary outcome was the decrease of demineralization or the increase of remineralization as measured by different methods (e. g.: transverse microradiography) or tooth fluoride uptake. Inclusion of studies, data extraction and quality assessment were undertaken independently and in duplicate by two members of the review team. Disagreements were solved by discussion and consensus or by a third party. One hundred and sixteen studies were included, of which 42 addressed specifically the comparison of dentifrices using different pH-cycling models. The other studies included meta-analysis or reviews, data about the effect of different fluoride sources on de-remineralization, different methods for analysis de-remineralization and chemical variables and characteristics of dental hard tissues that might have influence on de-remineralization processes. Generally, the studies presented ability to detect known results established by clinical trials, to demonstrate dose-related responses in the fluoride content of the dentifrices, and to provide repeatability and reproducibility between tests. In order to accomplish these features satisfactorily, it is mandatory to take into account the type of substrate and baseline artificial lesion, as well as the adequate response variables and statistical approaches to be used. This critical review of literature showed that the currently available pH-cycling models are appropriate to detect dose-response and pH-response of fluoride dentifrices, and to evaluate the impact of new active principles on the effect of fluoridated dentifrices, as well as their association with other anti-caries treatments.