Estudo da aplicabilidade do sistema pultrudado de fenólica/fibras de carbono em cabos condutores

Pós-graduação em Engenharia Mecânica - FEG

Aquecimento global e acidificação oceãnica: efeitos da temperatura, salinidade e dióxido de carbono no desenvolvimento larval do caranguejo intertidal Eriphia gonagra (Crustacea, Decapoda, Eriphiidae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Eletrodos impressos descartáveis e de carbono vítreo modificados com grafeno e compósito de nanotubos de carbono-quitosana aplicados na determinação de corantes de cabelo

Pós-graduação em Química - IQ

Desenvolvimento de tratamentos térmicos visando ganhos magnéticos em aços com ultra baixa concentração de carbono

The relationship between the microstructure and the magnetic properties of soft magnetic materials, have been studied by different researchers who seek to employ electrical systems, increasing their life span and reduce their energy consumption. Following this same line the Brazilian Synchrotron Light Laboratory developed a new synchrotron light source, the Sirius, where magnetic materials with high magnetic permeability values are being studied for use in accelerator dipoles. The low carbon steel is a ferromagnetic material that has a great relationship between cost and magnetic permeability. Aiming to raise the values of permeability of the material, heat treatments were done and evaluated the magnetic properties, microstructure and mechanical properties to correlate them. It was noted that the thermal annealing were the most effective, and the annealing performed with a small time threshold, which only phenomenon observed was the primary recrystallisation, was the most elevated values of magnetic permeability of the material, due to the average grain size ideal achieved. The heat treatments do not guide the magnetic domains of the material and not influence the mechanical properties of the material due to lack of carbon in the microstructure. The annealing treatments were shown to be an alternative to raising the values of the magnetic permeability of the material and facilitate the implementation of ultra low carbon steel in the dipoles of Sirius

Fractografia quantitativa: correlação entre dimensão fractal e tenacidade à fratura em compósitos fibra de carbono/epóxi

The fracture surfaces express the sequence of events of energy release due to crack propagation by linking the relief of the fracture to the loading stresses. This study aims to evaluate the heterogeneity of the critical zone for the advancement of the crack along its entire length in a thermoset composite carbon fiber and epoxy matrix, fractured in DCB testing (Double Cantilever Beam) and ENF (End-Notched Flexure). Investigations were made from image stacks obtained by optical reflection of extended depth from focus reconstruction. The program NIH Image J was used to obtain elevation map and fully focused images of the fracture surface, whose topographies were quantitatively analyzed. The monofractal behavior for DCB samples was assessed as being heterogeneous along the crack front and along the crack for all the conditionings. For the samples fractured in ENF test, there was a strong positive correlation to the natural condition, considering the fibers at 0° for the monofractal dimension and structural dimension (Df and Ds). For fibers at 90° to crack propagation, there was a moderate positive correlation for the textural dimension of natural condition. However, for the samples under ultraviolet condition and those subjected to thermal cycles, there was no correlation between the fractal dimension and fracture toughness in mode II

Valor de corte para teste respiratório com isótopos estáveis (Carbono 13) no diagnóstico do Helicobacter pylori utilizando IRMS para análise do sopro

After the isolation of Helicobacter pylori from an injury at the stomach mucosa by Marshall and Wareen, work that was recognized with the Nobel Prize of Medicine or Physiology in 2005, many other works showed the relationship between the presence of H. pylori and diseases at the digestive system, such as gastritis, gastric, duodenal and peptic ulcer, and stomach cancer. The 13C-Urea Breath Test - 13C-UBT is a non-invasive diagnostic method that utilizes the breath of a patient to determine the presence of H. pylori through stable isotopes. This work aimed to find an ideal 13C-UBT Isotopic Ratio Mass Spectroscopy cut-off value (a threshold between positive and negative) to diagnose H. pylori infection at Brazilian population. Patients were selected at the UNESP-Botucatu Clinical Hospital Endoscopy Section. With these results it was possible to indicate that the best cut-off value is between 2.5 to 6 ‰ of Delta Over Baseline (DOB)

Análise de ciclo avançado com seqüestro de carbono

The energy is considered one of the most important elements in the human´s life providing the survival as well as the well being. Nowadays, the technologies destined to generate power burn fossil fuels which pour gases (carbon dioxide among them) that contribute to the global warming phenomenon. Several research groups and universities have been studying different methods for generating power with low carbon dioxide emissions, including the possibility of burning zero-carbon fuels. In this text, it has been put attention to the Advanced Zero Emission Power Plants (AZEP) which separate the CO2 (from the gases involved in the power generation), compress it, dehydrate it and store it in appropriate reservoirs. The goal of this study was to find a possible solution to produce CO from CO2, activated by solar energy; the reaction between CO and steam generates a syngas comprised of H2 and CO2, which can be separated by chemical and/or physical processes. The text also contains a study concerning the compressed air energy storage power plant (CAES) and come up with its modification to C[CO2]ES. This power plant stores CO2 directing it to a reverse combustion process to produce CO which is headed to a syngas reactor to produce CO2 and H2. Hydrogen is separated and carried to the thermal cycle to generate power with low carbon emissions

Produção de ramnolipídios por linhagens de Pseusomonas aeruginosa em diferentes fontes de carbono e condições de cultivo

Os biossurfactantes, moléculas tenso-ativas sintetizadas por microrganismos, apresentam propriedades biológicas e superficiais que podem ser aplicadas a processos industriais diversos. Apesar das vantagens apresentadas, não são amplamente utilizados pela indústria, devido ao alto custo de produção, baixa produtividade e uso de substratos caros. Bactérias do gênero Pseudomonas são conhecidas por sintetizarem ramnolipídios, moléculas tenso-ativas promissoras em termos de produção industrial, por apresentarem excelentes propriedades tenso-ativas, além de características físico-químicas e biológicas que permitem a obtenção em concentrações superiores a outros biossurfactantes. O uso de substratos alternativos seria uma estratégia que facilitaria o desenvolvimento industrial de sua produção. A proposta deste trabalho é dar continuidade ao estudo da produção de ramnolipídios a partir de substratos não-convencionais (n-parafina, óleos vegetais utilizados em frituras, glicerol) por isolados de P. aeruginosa.

Síntese de nanopartículas de prata suportadas sobre nanotubos de carbono de paredes múltiplas para eletrooxidação de benzeno

Silver nanoparticles (Ag) were deposited on multi-walled carbon nanotube by eletroless. The hybrid Ag/MWCNT was used in the modification of glassy carbon electrode (GC) surface. The electrochemical characterization confirmed the presence of Ag in the nanocomposite has been showed that the synthesis was successful. The GC electrode modified with Ag/MWCNT film was evaluated for electro-oxidation of benzene. The electrochemical behavior presented an improvement on the catalytic surface in relation to non-modified GC electrode. The anodic peak current increased the magnitude in three times when compared with the CG electrode modified only with MWCNT

Produção de eletrodos em carbono vítreo monolítico e reticulado a partir da resina furfurílica dopada com cobre

The glassy carbon is a material with a huge technological evolution. Due to its lightness, biocompatibility and their thermal and electrical properties this material finds applications in several industrial fields such as electronics, medical, aerospace and chemical. In order to explore the conductive properties of glassy carbon for use as modified electrodes, the present work aims the processing of monolithic and reticulated glassy carbon with colloidal copper for use in electrochemical applications. First, the best parameters for the cure of furfuryl alcohol resin doped were established through viscosimetry measurements and pressurized differential scanning calorimetry. The analysis of the micrographs of the cured resins show that copper concentrations above 3% weight, generate higher porosity in the material. The characterizations of the monolithic and reticulated glassy carbon resulting from carbonization were performed by scanning electron microscopy (SEM), Raman and Electrochemical impedance spectroscopy, and although it was not possible to detect the presence of copper by SEM, the influence of these particles have been observed by Raman and FT-IR spectra and electrochemical behavior of the material. The decrease in conductivity of monolithic and reticulated glassy carbon in the presence of copper may be related to the defects caused by the presence of copper in the structure of the material.

Produção de enzimas xilanolíticas por fungo filamentoso em diferentes fontes de carbono

O trabalho teve como objetivo principal identificar a produção de enzimas xilanolíticas de um fungo encontrado no solo amazônico a partir do seu crescimento em diferentes fontes de carbono e em dois tipos de meio de cultivo: meio semi sólido e meio líquido Vogel. No mei semi sólido o crescimento do fungo aconteceu durante 7 dias, já no meio líquido foi feito em quatro tempos diferentes: 24, 36, 48 e 52 horas. As fontes de carbono usadas para ambos os meios foram: Após o crescimento os meios foram filtrados e foram realizadas a dosagem de proteína pelo método de Lowry e a determinação da atividade específica. Os filtrados foram concentrados através de tratamento com caulin, diálise e precipitação com acetona. Com os filtrados selecionados pode-se determinar o pH e a temperatura ótimas para a xilanase através de curvas de pH e temperatura. O fungo estudado produz enzimas do complexo xilanolítico, sendo que os melhores resultados foram encontrados usando a xilana no meio líquido e o sabugo de milho no meio semi sólido. Para a enzima encontrada o pH de atividade ótima é no valor 5,0 e foram encontrados dois picos de temperaturas ótima, na faixa de 30ºC e 60ºC, o que pode indicar a presença de mais de uma enzima do complexo xilanolítico

Avaliação da toxicidade do dióxido de carbono no sistema nervoso de Apis mellifera (Hymenoptera, Apidae)

A concentração de dióxido de carbono (CO2) global eleva-se a cada ano, isso deve-se a um desequilíbrio entre as taxas de emissão deste gás por atividades antropogênicas e fontes naturais e a taxa que a biosfera e oceanos o removem da atmosfera. O CO2 é um importante constituinte químico do ambiente, pois este é um gás que aprisiona radiação infravermelha emitida pela superfície da Terra, contribuindo, assim, para a manutenção da temperatura global necessária a vida. As alterações na concentração de CO2 na atmosfera afetam inúmeros animais que dependem que estas estejam altamente controladas para poderem sobreviver. Em abelhas Apis mellifera valores elevados de temperatura ou níveis de CO2 dentro da colméia podem ter efeitos deletérios. Estes insetos são considerados bioindicadores naturais, pois apresentam diferenças fisiológicas conforme as condições do ambiente, sendo utilizadas na avaliação de efeitos a várias substâncias presentes no meio. Atualmente uma das técnicas utilizadas para a avaliação do efeito de estímulos externos é a utilização da marcação da proteína c-Fos através da expressão do gene c-fos, que indicam tanto a existência de atividade celular como também possibilita a identificação de áreas cerebrais determinadas. Esta proteína foi utilizada com o intuído de verificar se concentrações elevadas de gás carbônico são capazes de alterar as funções cerebrais da abelha Apis mellifera, comprometendo sua atividade de orientação e, conseqüentemente seu forrageamento. Marcações positivas à proteína Fos foram observadas nas regiões dos lobos ópticos e ocelos tanto do grupo controle quanto dos grupos Resumo Jacob, C. R. O. 9 expostos ao gás dióxido de carbono para todas as idades coletadas, estes resultados estão relacionados com a...(Resumo completo, clicar acesso eletrônico abaixo)

Auditoria energética em caldeira de monóxido de carbono

Within the concepts of sustainability, energy audit magnified its importance in managing systems in industrial plants. Can reduce waste and save energy representative, the improvement and development of thermal and electrical systems can be very attractive to business. With the focus on a boiler generating steam, the energy audit aimed to increase efficiency and eliminate energy losses of the heat engine. The boiler in question is commonly called CO boiler because most of the calorific power provided comes from this. Using a fuel gas from the catalyst regeneration process, it has featured in the boiler power generation system of the refinery. Burning a mixture of gaseous components from discarded into the atmosphere, the heat engine can generate tons of steam just as the other boilers installed. The challenge was to work with this gas mixture and obtain maximum efficiency, reduce moisture and enjoy the warmth of the heat exchange have been studied and recommended. Every project, from evaluation of the variables in the composition of fuel gas, to the using of heat exchangers and refrigeration system are suitable for evaluation and improvements

Comparação de compósitos obtidos via RTM de resina epóxi e fibra de carbono com e sem descontinuidade nos tecidos

Technology is growing interest in the use of composites, due to the requirement of lighter materials and more resistant, factors essential to meet the project specifications and reduce the operational cost. In the production of high performance structural composites, considering the aerospace criteria, the domestic industry has shown interest in the process of resin transfer molding (RTM) for reproducibility and low cost. This process is suitable for producing components of polymeric composites with relatively simple geometries, consistent thicknesses, high quality finish with no size limitations. The objective of this work was machined carbon steel to make a matched-die tooling for RTM and produce two composite plates of epoxy resin and carbon fiber fabric with and without induced discontinuities, which were compared towards their impregnation with ultrasound, their properties via tensile tests and thermal analysis. In ultrasonic inspection, it was found good impregnation of the preform of both composites. In the thermal analysis it was possible to check the degradation temperature of the composites, the glass transition temperature and it was found that the composites showed no effective cure cycles, but presented good performance in the tensile test when compared with aluminum alloy 7050 T7451 . The results showed that the injection strategy was appropriate since the laminate exhibited a good quality for the proposed application

Avaliação de juntas soldadas em tubos de aço carbono submetidos a altas temperatura e pressões

The welding process in industrial piping is still the most effective way to ensure the durability and quality of the wide range of industrial process, although because of the high demand for energy and quality of the produced products, the piping has been constantly tested for high pressure applications and still high temperature. The welding method analyzed is the TIG (Tungsten Inert Gas) welding or GTAW (Gas-Shielded Tungsten Arc Welding), which ones have as principal feature the utilization of a not consumable tungsten electrode in the torch extremity , in this process is necessary a protective atmosphere of inert gas. The welding TIG advantage is the obtaining of a welded seam clean and with quality for not has slag after the welding. This work has as objective show the variability in the carbon steel piping welding parameters and by the tests in four proof bodies will be shown the influence of the variation of the welding methods in a welded seam. The tests will vary since the piece to be welded preparation, till penetrating liquid tests, welding macrography, welding x-ray and traction tests. Even been a clean and with quality welding is necessary a final inspection in the seam welded looking for defects almost inevitable resulted of the welded process, the obtained results have the objective of indicate and minimize the defects to ensure quality and durability of the welded seam