932 resultados para canopy layer
Resumo:
We report here the utilization of atomid layer deposition to passivate surface map states in mosoporous TiO2 nanoparticles for solid state dye sensitized solar cells based on 9,9'-spirobifluorene (spiro-OMeTAD). By depositing ZrO2 films with angstrom-level precision, coating the mesoporous TiO2 produces over a two-fold enhancement in short-circuit current density, as compared to a control device. Impedance spectroscopy measurements provide evidence that the ZrO2 coating reduces recombination lossed at the TiO2/spiro-OMeTAD interface and passivates localized surface states. Low-frequency negative capacitances, frequently observed in nanocomposite solar cells, have been associated with the surface-state mediated charge transfer from TiO2 to the spiro-OMeTAD.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Na Floresta Pluvial Atlântica Montana do Sudeste Brasileiro, foi realizado um estudo para descrever e avaliar a colonização de clareiras. A composição de clareiras foi levantada através da cobertura do solo para as espécies herbáceas enquanto que todos os indivíduos lenhosos maiores que um metro de altura foram mensurados e identificados. Também foram coletadas informações sobre a estrutura das clareiras (área da clareira, número e diâmetro das quedas), posição topográfica e vegetação circundante. Dois gêneros de Marantaceae apresentaram considerável freqüência e abundância nas clareiras. As espécies lenhosas mais freqüentes e abundantes pertenceram ao grupo não-pioneiro e as famílias mais ricas encontradas nas clareiras não diferiram quando comparado à floresta como um todo. Como para as variáveis do estrato herbáceo e da vegetação circundante, os resultados revelaram que efeitos diretos e indiretos da topografia são importantes na determinação da composição interna de clareiras por espécies lenhosas. Estes resultados sugerem que a colonização de clareiras é influenciada não apenas pelas variáveis de estrutura, mas também pela posição topográfica e pelos indivíduos pré-estabelecidos.
Resumo:
Mycolic acids analysis by thin-layer chromatography (TLC) has been employed by several laboratories worldwide as a method for fast identification of mycobacteria. This method was introduced in Brazil by our laboratory in 1992 as a routine identification technique. Up to the present, 861 strains isolated were identified by mycolic acids TLC and by standard biochemical tests; 61% out of these strains came as clinical samples, 4% isolated from frogs and 35% as environmental samples. Mycobacterium tuberculosis strains identified by classical methods were confirmed by their mycolic acids contents (I, III and IV). The method allowed earlier differentiation of M. avium complex - MAC (mycolic acids I, IV and VI) from M. simiae (acids I, II and IV), both with similar biochemical properties. The method also permitted to distinguish M. fortuitum (acids I and V) from M. chelonae (acids I and II) , and to detect mixed mycobacterial infections cases as M. tuberculosis with MAC and M. fortuitum with MAC. Concluding, four years experience shows that mycolic acids TLC is an easy, reliable, fast and inexpensive method, an important tool to put together conventional mycobacteria identification methods.
Resumo:
Foi estudada a anatomia foliar de Tillandsia crocata (E. Morren) Baker, T. gardneri Lindl., T. geminiflora Brongn., T. linearis Vell., T. lorentziana Griseb., T. mallemontii Glaziou ex Mez, T. recurvata L., T. streptocarpa Baker, T. stricta Soland ex Sims, T. tenuifolia L. T. usneoides L. e Tillandsia sp., dos Campos Gerais, Paraná, Brasil. em vista frontal a epiderme apresenta células com paredes lineares até sinuosas, corpos silicosos e escamas epidérmicas que protegem os estômatos anomocíticos. A epiderme e o primeiro estrato da hipoderme apresentam células lignificadas na maioria das espécies. em secção transversal observa-se estômatos que ocorrem um pouco abaixo do nível das demais células da epiderme; presença de parênquima aqüífero; canais de ar longitudinais e feixes vasculares colaterais circundados por bainha dupla. Essas estruturas anatômicas são xeromórficas e usualmente consideradas como adaptações ao hábito epifítico das Tillandsia atmosféricas. Além disso, elas poderiam também ser usadas com finalidades diagnósticas para as espécies. Forma do limbo da folha em secção transversal, ornamentação da cutícula, estrutura das escamas epidérmicas, espessamento das paredes das células epidérmicas, distribuição dos estômatos, estrutura e distribuição das células do parênquima aqüífero, presença de canais de ar e tamanho de feixes vasculares são caracteres que podem auxiliar na delimitação taxonômica das espécies dentro do gênero.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Electroactive films of iron tetrasulfonated phthalocyanine (FeTsPc) were assembled via the electrostatic layer-by-layer technique (LBL), in which FeTsPc layers were alternated with the polycationic poly(allylamine hydrochloride) (PAN). The multilayer formation was monitored via UV-Vis spectroscopy by measuring the increase in the Q Band of FeTsPc at 676 nm. Film thickness was estimated by profilometry as ca. 10 Angstrom per bilayer. Fourier transform infrared and UV-Vis absorption spectroscopy suggested specific interactions between FeTsPc and PAR Cyclic voltammograms showed reproducible pairs of oxidation-reduction peaks at 0.92 mV and 0.70 mV, respectively, for a 50-bilayer PAH/FeTsPc film at 50 mV/s (vs Ag/AgNO3).
Resumo:
The dielectric properties of (Ba, Sr)TiO3 films were found to be remarkably sensitive to the postannealing treatment atmosphere. This study demonstrates that postannealing in an oxygen atmosphere increases the dielectric relaxation phenomenon and that postannealing in a nitrogen atmosphere produces a slight dielectric relaxation. Such dependence of the dielectric relaxation was related both to oxygen vacancies and to the presence of negatively charged oxygen, trapped at the grain boundary and/or at the electrode/dielectric film interface. (C) 2000 American Institute of Physics. [S0003-6951(00)00817-2].
Resumo:
There is no consensus on whether the first mineralized layer, the hyaline layer, that is juxtaposed to root dentine is a variety of dentine or cementum or even a tissue of epithelial origin. Some suggest that there is no intermediate tissue between the acellular extrinsic fibre cementum (AEFC) and the root dentine. Here, to study hyaline layer formation and mineralization we examined by transmission electron microscopy the early stages of root development in upper molars from 10 to 13 day old Wistar rats. In addition to conventionally processed material, undemineralized and unstained sections were examined, which showed the deposition of fine mineral crystals in contact with the mineralized surface of root dentine. Early mineralization of the hyaline layer occurred in the region of the inner basement membrane, which persisted between the inner cellular layer of Hertwig's epithelial root sheath and the outer mineralized root dentine. When the root sheath began its fragment, collagen fibrils From the developing periodontal ligament began to insert into the mineralising hyaline layer, which was 0.5-0.8 mum wide. As the fragmentation of the root sheath HERS increased, more collagen fibrils appeared intermingled with the mineralising hyaline layer. In more advanced stages, when the hyaline layer had become fully mineralized and the formation of the AEFC began, the hyaline layer could no longer be identified. Thus, the hyaline layer is clearly discernible at early stages of periodontal development. Subsequently, it is masked by intermingling of cementum and dentine and therefore it is not possible to detect it in the formed roots of rat molars. (C) 2001 Elsevier B.V. Ltd. All rights reserved.
Resumo:
The dynamic scale theory and fractal concepts are employed in the characterization of surface morphological properties of layer-by-layer (LBL) films from poly(o-methoxyaniline) (POMA) alternated with poly(vinyl sulfonic acid) (PVS). The fractal dimensions are found to depend on the procedures to fabricate the POMA/PVS multilayers, particularly with regard to the drying procedures. LBL films obtained via drying in ambient air show a more homogeneous surface, compared to films dried under vacuum or a flow of nitrogen, due to a uniform rearrangement of polymer molecules during solvent evaporation.
Resumo:
An indirect ELISA using soluble whole cell antigen was used to screen serum samples obtained from breeder and layer flocks some of which had shown clinical or bacteriological evidence of infection with Salmonella Gallinarum or S. Pullorum. There was good correlation between Salmonella infection and the presence of serum samples showing high optical density (OD) values. Sera from seven flocks showing high values were retested using group D (0-1, 9, 12) lipopolysaccharide (LPS) and g,m-H flagella as detecting antigens. Sera from six flocks produced high OD values with LPS and low values with flagella confirming infection with a non-flagellate, group D Salmonella while one produced high values with both antigens indicating mixed infection with another group D serotype.
Resumo:
Forty seven strains of mycobacteria (35 strains isolated from clinical specimens and 12 reference strains) were analyzed for mycobactin and mycolate production by thin-layer chromatography (TLC). Different growth conditions had little or no effect on the production of individual mycobactins and the reproducibility of mycobactin Rf values. Mycolate profiles of isolated strains were compared with those of reference strains. Clinical isolates belonging to the same species showed the same profiles. The combined evaluation of mycobacterial products by TLC allowed the identification of pathogenic and opportunist cultivable mycobacteria. on routine examination, the analysis of mycobactin and mycolate production constitutes an adequate procedure for the characterization and identification of myobacteria.