Anaerobic bio-digestion of concentrate obtained in the process of ultra filtration of effluents from tilapia processing unit

The objective of the present study was to evaluate the efficiency of the process of biodigestion of the protein concentrate resulting from the ultrafiltration of the effluent from a slaughterhouse freezer of Nile tilapia. Bench digesters were used with excrements and water (control) in comparison with a mixture of cattle manure and effluent from the stages of filleting and bleeding of tilapias. The effluent obtained in the continuous process (bleeding + filleting) was the one with highest accumulated population from the 37th day, as well as greatest daily production. Gases composition did not differ between the protein concentrates, but the gas obtained with the use of the effluent from the filleting stage presented highest methane gas average (78.05%) in comparison with those obtained in the bleeding stage (69.95%) and in the continuous process (70.02%) or by the control method (68.59%).

Emergence and fate of siloxanes in waste streams: Release mechanisms, partitioning and persistence in three environmental compartments

Siloxanes are widely used in personal care and industrial products due to their low surface tension, thermal stability, antimicrobial and hydrophobic properties, among other characteristics. Volatile methyl siloxanes (VMS) have been detected both in landfill gas and biogas from anaerobic digesters at wastewater treatment plants. As a result, they are released to gas phase during waste decomposition and wastewater treatment. During transformation processes of digester or landfill gas to energy, siloxanes are converted to silicon oxides, leaving abrasive deposits on engine components. These deposits cause increased maintenance costs and in some cases complete engine overhauls become necessary. ^ The objectives of this study were to compare the VMS types and levels present in biogas generated in the anaerobic digesters and landfills and evaluate the energetics of siloxane transformations under anaerobic conditions. Siloxane emissions, resulting from disposal of silicone-based materials, are expected to increase by 29% within the next 10 years. Estimated concentrations and the risk factors of exposure to siloxanes were evaluated based on the initial concentrations, partitioning characteristics and persistence. It was determined that D4 has the highest risk factor associated to bioaccumulation in liquid and solid phase, whereas D5 was highest in gas phase. Additionally, as siloxanes are combusted, the particle size range causes them to be potentially hazardous to human health. When inhaled, they may affix onto the alveoli of the lungs and may lead to development of silicosis. Siloxane-based COD-loading was evaluated and determined to be an insignificant factor concerning COD limits in wastewater. ^ Removal of siloxane compounds is recommended prior to land application of biosolids or combustion of biogas. A comparison of estimated costs was made between maintenance practices for removal of siloxane deposits and installation/operation of fixed-bed carbon absorption systems. In the majority of cases, the installation of fixed-bed adsorption systems would not be a feasible option for the sole purpose of siloxane removal. However they may be utilized to remove additional compounds simultaneously.^

A comparative study of the species composition of discards from five fisheries from the Algarve (southern Portugal)

Discards from five of the most important fisheries (crustacean trawling, fish trawling, demersal purse seining, pelagic purse seining and trammel netting) in southern Portugal were studied and compared. A total of 236 species of all taxa were discarded, with fish and cephalopods accounting for more than 90% of the discarded biomass, except trammel nets (81%). Although there was some overlapping of species, multivariate analysis using cluster analysis for classification and multidimensional scaling (MDS) for ordination, showed that there were significant differences between the five gears in terms of species composition and biomasses discarded, with the least similarity between crustacean trawling and all other fishing operations. The differences between fisheries were probably as a result of a combination of gear selectivity and depth fished. The results suggest that discarding practices are likely to have different, yet significant impacts on the marine ecosystem, warranting further studies on the fate of discards, the factors influencing discarding and mitigation.

Feeding habits of the velvet belly lanternshark Etmopterus spinax (Chondrichthyes : Etmopteridae) off the Algarve, southern Portugal

Etmopterus spinax is one of the most abundant predators of the upper continental slope off the Algarve (southern Portugal), where it is captured in large quantities in deep-water fisheries. The feeding habits of E. spinax off the Algarve were investigated through the analysis of stomach contents of 376 individuals. Prey composition was described and maturity, sex and size related variations in the diet analysed. The overall diet of E. spinax suggested a fairly generalized benthopelagic foraging behaviour primarily tuned to pelagic macroplankton/microneckton, teleost fish and cephalopods. Sex and maturity related differences in the diet were not significant. Two main ontogenic diet shifts were observed at about 17 and 28 cm total length. Small and medium sized immature sharks had a diet dominated by eurybathic crustaceans, chiefly Meganyctiphanes norvegica and Pasiphaea sivado. Larger individuals consumed more teleosts and cephalopods, in part associated with scavenging as a new feeding strategy. With increasing shark size the diet diversified both in terms of resources exploited and prey size.

Small MPAs do not protect cuttlefish (Sepia officinalis)

Marine reserves have been widely implemented as tools for biodiversity conservation and fisheries management, amongst other goals. A large number of empirical studies have focused on their effects on reef fish populations. Yet, few studies have looked at their effectiveness on semelparous species such as cephalopods, in spite of their commercial importance in many coastal regions across the globe. In this study we combine behavioural (biotelemetry) and demographic (experimental fishing) data to understand the effects of the Luiz Saldanha Marine Park (LSMP) on local populations of cuttlefish, Sepia officinalis. We used a beyond-BACI design to analyze the possible effect of the implementation of a no-take area on the abundance and biomass of this species and acoustic telemetry data to assess its site fidelity and movements within the study area. Results indicate that there was no detectable effect of the implementation of the no-take area on the abundance or biomass of cuttlefish. We found evidence that acoustically tagged adult cuttlefish leave the reserve a few days or weeks after tagging. The fact that cuttlefish have low site fidelity inside the reserve and large movements across and beyond the study area explains why there is no increase in the population inside the MPA. These results suggest that small coastal marine reserves such as the LSMP are not effective in providing long term protection to cuttlefish populations and, probably, those of other short-lived, highly mobile cephalopods. (C) 2013 Elsevier B.V. All rights reserved.

Species and size selectivity in a Portuguese multispecies artisanal long-line fishery

The species and size selectivity of long-lines using small hooks were studied off the south coast of Portugal using ''Mustad'' brand round bent, flatted sea hooks (Quality 2316 DT) numbers 15, 13, and 11 baited with razor shell clam (Ei-isis siliqua). Hook numbers 13 and 11 are 49 and 109% larger respectively than number 15 hooks in terms of overall size (maximum width x maximum length). A total of 39 900 hooks were fished in 45 sets and 35 species of fish and cephalopods were caught. As a group, 13 species of sea breams (Sparidae) dominated the catch by numbers (58%) and weight (73%). Six species of sea breams, along with the greater weever fish (Trachinus draco) accounted for 81% of the total catch by weight, with the common or white sea bream (Diplodus sargus) bring the most important (29%). Catch size distributions by hook size were, in general, highly overlapped for all species and hook size had little apparent effect on minimum size at capture. All hooks caught a wide range of sizes per species, but the catch rate (number of fish per 100 hooks) was significantly lower for the largest hook. Except for the black sea bream (Spondyliosoma cantharus), capture of illegally sized or immature fish was minimal. Small increases in average size with hook size were evident for four species: Diplodus sargus, D. vulgaris, Lithognathus mormyrus and Serranus cabrilla. No differences in size selectivity were detected for Boops boops, D. annularis, Spondyliosoma cantharus and Trachinus draco. A skew-normal model adequately described differences in size selectivity in five of six species. (C) 1996 International Council for the Exploration of the Sea

Feeding ecology of the deep-sea lanternshark Etmopterus pusillus (Elasmobranchii: Etmopteridae) in the northeast Atlantic

This study provides the first description of the feeding ecology of the smooth lanternshark Etmopterus pusillus based on stomach contents of specimens caught as bycatch in the Algarve (southern Portugal) with bottom trawling and bottom longline. The diet of E. pusillus consists mainly of fish (dry weight (% W)=87.1%; frequency of occurrence (%FO)=28.6%; number (%N)=30.3%), crustaceans (%W=7.7%; %FO=36.7%; %N=3.4%) and cephalopods (%W=4.7%; %FO=11.3%; %N=11.1%). The diet did not vary between sexes. Ontogenic changes were detected: crustaceans decreased in importance as the sharks increased in size and fish became dominant in the diet of adults. Combining two fishing methods provided broad information on the diet of E. pusillus, as bottom trawling caught smaller specimens and longlines caught larger individuals. E. pusillus feeds mainly on non-commercial species, and therefore does not compete directly with commercial fisheries. Finally, E. pusillus feeds in various parts of the water column and thus it can access a wide range of prey; however, this also means that it can be caught by both gears, making it more vulnerable in terms of conservation.

Estudio de factibilidad para la implementación de biodigestores para el procesamiento de los residuos sólidos orgánicos en granjas avícolas

El estudio tiene como objetivo proponer una mejor manera de gestionar los residuos sólidos orgánicos producidos en la granja avícola de engorde La Rosita, ubicada en la Mesa de los Santos, Santander. Para esto se realizó una descripción general de la granja y de la producción de los “desechos” frutos de sus procesos. Con una producción aproximada de 160 toneladas mensuales de pollinaza, se propone la implementación de un biodigestor que los procese y convierta en energía calórica y eléctrica disponible para el autoabastecimiento. Se analizan conceptual y financieramente la implementación de dos tipos de biodigestores, para finalmente decidir cuál de las dos propuestas es la que mejor se adapta a las necesidades de la granja.

On The Use of Genetic Algorithms for Parameter Identification in Anaerobic Digestion Modelling

Anaerobic digestion (AD) of wastewater is a very interesting option for waste valorization, energy production and environment protection. It is a complex, naturally occurring process that can take place inside bioreactors. The capability of predicting the operation of such bioreactors is important to optimize the design and the operation conditions of the reactors, which, in part, justifies the numerous AD models presently available. The existing AD models are not universal, have to be inferred from prior knowledge and rely on existing experimental data. Among the tasks involved in the process of developing a dynamical model for AD, the estimation of parameters is one of the most challenging. This paper presents the identifiability analysis of a nonlinear dynamical model for a batch reactor. Particular attention is given to the structural identifiability of the model, which considers the uniqueness of the estimated parameters. To perform this analysis, the GenSSI toolbox was used. The estimation of the model parameters is achieved with genetic algorithms (GA) which have already been used in the context of AD modelling, although not commonly. The paper discusses its advantages and disadvantages.

Advances in integration of photovoltaic power and energy production in practical systems

This thesis presents advances in integration of photovoltaic (PV) power and energy in practical systems, such as existing power plants in buildings or directly integrated in the public electrical grid. It starts by providing an analyze of the current state of PV power and some of its limitations. The work done in this thesis begins by providing a model to compute mutual shading in large PV plants, and after provides a study of the integration of a PV plant in a biogas power plant. The remainder sections focus on the work done for project PVCROPS, which consisted on the construction and operation of two prototypes composed of a PV system and a novel battery connected to a building and to the public electrical grid. These prototypes were then used to test energy management strategies and validate the suitability of the two advanced batteries (a lithium-ion battery and a vanadium redox ow battery) for households (BIPV) and PV plants. This thesis is divided in 7 chapters: Chapter 1 provides an introduction to explain and develop the main research questions studied for this thesis; Chapter 2 presents the development of a ray-tracing model to compute shading in large PV elds (with or without trackers); Chapter 3 shows the simulation of hybridizing a biogas plant with a PV plant, using biogas as energy storage; Chapters 4 and 5 present the construction, programming, and initial operation of both prototypes (Chapter 4), EMS testing oriented to BIPV systems (Chapter 5). Finally, Chapters 6 provides some future lines of investigation that can follow this thesis, and Chapter 7 shows a synopsis of the main conclusions of this work; Resumo: Avanços na integracão de potência fotovoltaica e producão de energia em sistemas práticos Esta tese apresenta avanços na integração de potência e energia fotovoltaica (PV) em sistemas práticos, tais como centrais existentes ou a rede eléctrica pública. Come ça por analisar o estado corrente do fotovoltaico no mundo e aborda algumas das suas limitações. O trabalho feito para esta tese de doutoramento começou pelo desenvolvimento de um modelo para calcular os sombreamentos que ocorrem em grandes campos fotovoltaicos, e depois apresenta um estudo sobre a integração um sistema fotovoltaico em uma central eléctrica a bióg as. As ultimas secções da tese focam-se no trabalho feito para o projecto PVCROPS, que consistiu na construção e operação de dois demonstratores, cada um formado por um sistema fotovoltaico e bateria conectados a um edíficio e a rede eléctrica pública. Estes protótipos foram posteriormente utilizados para testar estratégias de gestão de energia (EMS) e para validar a operação de duas baterias avançadas (bateria de Iões de Li tio e bateria de Fluxo Redox de Van adio) e a sua utiliza ção para habitações e centrais PV. A tese está dividida em 7 capitulos: O capitulo 1 apresenta uma introdução para explicar e desenvolver as principais questões que foram investigadas nesta tese; O capitulo 2 mostra o desenvolvimento de um modelo baseado em traçados de raios para calcular sombreamentos mútuos em grandes centrais PV (com e sem seguidores); O capitulo 3 mostra a simulação da hibridização de uma central electrica a biogas com uma central PV, e utilizando o biógas como armazenamento de energia. Os capitulos 4 e 5 apresentam a construção, programação e operação inicial dos dois demonstradores (Capitúlo 4), o teste de EMS orientadas para sistemas PV em habitações (Capítulo 5). Finalmente, o capítulo 6 sugere algumas futuras linhas de investigação que poderão seguir esta tese, e o Capítulo 7 faz uma sinopse das principais conclusões deste trabalho.

Evolutionary algorithms for the modeling of bioreactors

This work aims to study the application of Genetic Algorithms in anaerobic digestion modeling, in particular when using dynamical models. Along the work, different types of bioreactors are shown, such as batch, semi-batch and continuous, as well as their mathematical modeling. The work intendeds to estimate the parameter values of two biological reaction model. For that, simulated results, where only one output variable, the produced biogas, is known, are fitted to the model results. For this reason, the problems associated with reverse optimization are studied, using some graphics that provide clues to the sensitivity and identifiability associated with the problem. Particular solutions obtained by the identifiability analysis using GENSSI and DAISY softwares are also presented. Finally, the optimization is performed using genetic algorithms. During this optimization the need to improve the convergence of genetic algorithms was felt. This need has led to the development of an adaptation of the genetic algorithms, which we called Neighbored Genetic Algorithms (NGA1 and NGA2). In order to understand if this new approach overcomes the Basic Genetic Algorithms (BGA) and achieves the proposed goals, a study of 100 full optimization runs for each situation was further developed. Results show that NGA1 and NGA2 are statistically better than BGA. However, because it was not possible to obtain consistent results, the Nealder-Mead method was used, where the initial guesses were the estimated results from GA; Algoritmos Evolucionários para a Modelação de Bioreactores Resumo: Neste trabalho procura-se estudar os algoritmos genéticos com aplicação na modelação da digestão anaeróbia e, em particular, quando se utilizam modelos dinâmicos. Ao longo do mesmo, são apresentados diferentes tipos de bioreactores, como os batch, semi-batch e contínuos, bem como a modelação matemática dos mesmos. Neste trabalho procurou-se estimar o valor dos parâmetros que constam num modelo de digestão anaeróbia para o ajustar a uma situação simulada onde apenas se conhece uma variável de output, o biogas produzido. São ainda estudados os problemas associados à optimização inversa com recurso a alguns gráficos que fornecem pistas sobre a sensibilidade e identifiacabilidade associadas ao problema da modelação da digestão anaeróbia. São ainda apresentadas soluções particulares de idenficabilidade obtidas através dos softwares GENSSI e DAISY. Finalmente é realizada a optimização do modelo com recurso aos algoritmos genéticos. No decorrer dessa optimização sentiu-se a necessidade de melhorar a convergência e, portanto, desenvolveu-se ainda uma adaptação dos algoritmos genéticos a que se deu o nome de Neighboured Genetic Algorithms (NGA1 e NGA2). No sentido de se compreender se as adaptações permitiam superar os algoritmos genéticos básicos e atingir as metas propostas, foi ainda desenvolvido um estudo em que o processo de optimização foi realizado 100 vezes para cada um dos métodos, o que permitiu concluir, estatisticamente, que os BGA foram superados pelos NGA1 e NGA2. Ainda assim, porque não foi possivel obter consistência nos resultados, foi usado o método de Nealder-Mead utilizado como estimativa inicial os resultados obtidos pelos algoritmos genéticos.