Advanced optical modulation and format conversion

Over the years, the increased search and exchange of information lead to an increase of traffic intensity in todays optical communication networks. Coherent communications, using the amplitude and phase of the signal, reappears as one of the transmission techniques to increase the spectral efficiency and throughput of optical channels. In this context, this work present a study on format conversion of modulated signals using MZI-SOAs, based exclusively on all- optical techniques through wavelength conversion. This approach, when applied in interconnection nodes between optical networks with different bit rates and modulation formats, allow a better efficiency and scalability of the network. We start with an experimental characterization of the static and dynamic properties of the MZI-SOA. Then, we propose a semi-analytical model to describe the evolution of phase and amplitude at the output of the MZI-SOA. The model’s coefficients are obtained using a multi-objective genetic algorithm. We validate the model experimentally, by exploring the dependency of the optical signal with the operational parameters of the MZI-SOA. We also propose an all-optical technique for the conversion of amplitude modulation signals to a continuous phase modulation format. Finally, we study the potential of MZI-SOAs for the conversion of amplitude signals to QPSK and QAM signals. We show the dependency of the conversion process with the operational parameters deviation from the optimal values. The technique is experimentally validated for QPSK modulation.

Advanced energy efficient coordinated multi-point transmission for OFDMA

The ever-growing energy consumption in mobile networks stimulated by the expected growth in data tra ffic has provided the impetus for mobile operators to refocus network design, planning and deployment towards reducing the cost per bit, whilst at the same time providing a signifi cant step towards reducing their operational expenditure. As a step towards incorporating cost-eff ective mobile system, 3GPP LTE-Advanced has adopted the coordinated multi-point (CoMP) transmission technique due to its ability to mitigate and manage inter-cell interference (ICI). Using CoMP the cell average and cell edge throughput are boosted. However, there is room for reducing energy consumption further by exploiting the inherent exibility of dynamic resource allocation protocols. To this end packet scheduler plays the central role in determining the overall performance of the 3GPP longterm evolution (LTE) based on packet-switching operation and provide a potential research playground for optimizing energy consumption in future networks. In this thesis we investigate the baseline performance for down link CoMP using traditional scheduling approaches, and subsequently go beyond and propose novel energy e fficient scheduling (EES) strategies that can achieve power-e fficient transmission to the UEs whilst enabling both system energy effi ciency gain and fairness improvement. However, ICI can still be prominent when multiple nodes use common resources with di fferent power levels inside the cell, as in the so called heterogeneous networks (Het- Net) environment. HetNets are comprised of two or more tiers of cells. The rst, or higher tier, is a traditional deployment of cell sites, often referred to in this context as macrocells. The lower tiers are termed small cells, and can appear as microcell, picocells or femtocells. The HetNet has attracted signiffi cant interest by key manufacturers as one of the enablers for high speed data at low cost. Research until now has revealed several key hurdles that must be overcome before HetNets can achieve their full potential: bottlenecks in the backhaul must be alleviated, as well as their seamless interworking with CoMP. In this thesis we explore exactly the latter hurdle, and present innovative ideas on advancing CoMP to work in synergy with HetNet deployment, complemented by a novel resource allocation policy for HetNet tighter interference management. As system level simulator has been used to analyze the proposed algorithm/protocols, and results have concluded that up to 20% energy gain can be observed.

Ferroelectric : CNTs structures fabrication for advanced functional nano devices

This work is about the combination of functional ferroelectric oxides with Multiwall Carbon Nanotubes for microelectronic applications, as for example potential 3 Dimensional (3D) Non Volatile Ferroelectric Random Access Memories (NVFeRAM). Miniaturized electronics are ubiquitous now. The drive to downsize electronics has been spurred by needs of more performance into smaller packages at lower costs. But the trend of electronics miniaturization challenges board assembly materials, processes, and reliability. Semiconductor device and integrated circuit technology, coupled with its associated electronic packaging, forms the backbone of high-performance miniaturized electronic systems. However, as size decreases and functionalization increases in the modern electronics further size reduction is getting difficult; below a size limit the signal reliability and device performance deteriorate. Hence miniaturization of siliconbased electronics has limitations. On this background the Road Map for Semiconductor Industry (ITRS) suggests since 2011 alternative technologies, designated as More than Moore; being one of them based on carbon (carbon nanotubes (CNTs) and graphene) [1]. CNTs with their unique performance and three dimensionality at the nano-scale have been regarded as promising elements for miniaturized electronics [2]. CNTs are tubular in geometry and possess a unique set of properties, including ballistic electron transportation and a huge current caring capacity, which make them of great interest for future microelectronics [2]. Indeed CNTs might have a key role in the miniaturization of Non Volatile Ferroelectric Random Access Memories (NVFeRAM). Moving from a traditional two dimensional (2D) design (as is the case of thin films) to a 3D structure (based on a tridimensional arrangement of unidimensional structures) will result in the high reliability and sensing of the signals due to the large contribution from the bottom electrode. One way to achieve this 3D design is by using CNTs. Ferroelectrics (FE) are spontaneously polarized and can have high dielectric constants and interesting pyroelectric, piezoelectric, and electrooptic properties, being a key application of FE electronic memories. However, combining CNTs with FE functional oxides is challenging. It starts with materials compatibility, since crystallization temperature of FE and oxidation temperature of CNTs may overlap. In this case low temperature processing of FE is fundamental. Within this context in this work a systematic study on the fabrication of CNTs - FE structures using low cost low temperature methods was carried out. The FE under study are comprised of lead zirconate titanate (Pb1-xZrxTiO3, PZT), barium titanate (BaTiO3, BT) and bismuth ferrite (BiFeO3, BFO). The various aspects related to the fabrication, such as effect on thermal stability of MWCNTs, FE phase formation in presence of MWCNTs and interfaces between the CNTs/FE are addressed in this work. The ferroelectric response locally measured by Piezoresponse Force Microscopy (PFM) clearly evidenced that even at low processing temperatures FE on CNTs retain its ferroelectric nature. The work started by verifying the thermal decomposition behavior under different conditions of the multiwall CNTs (MWCNTs) used in this work. It was verified that purified MWCNTs are stable up to 420 ºC in air, as no weight loss occurs under non isothermal conditions, but morphology changes were observed for isothermal conditions at 400 ºC by Raman spectroscopy and Transmission Electron Microscopy (TEM). In oxygen-rich atmosphere MWCNTs started to oxidized at 200 ºC. However in argon-rich one and under a high heating rate MWCNTs remain stable up to 1300 ºC with a minimum sublimation. The activation energy for the decomposition of MWCNTs in air was calculated to lie between 80 and 108 kJ/mol. These results are relevant for the fabrication of MWCNTs – FE structures. Indeed we demonstrate that PZT can be deposited by sol gel at low temperatures on MWCNTs. And particularly interesting we prove that MWCNTs decrease the temperature and time for formation of PZT by ~100 ºC commensurate with a decrease in activation energy from 68±15 kJ/mol to 27±2 kJ/mol. As a consequence, monophasic PZT was obtained at 575 ºC for MWCNTs - PZT whereas for pure PZT traces of pyrochlore were still present at 650 ºC, where PZT phase formed due to homogeneous nucleation. The piezoelectric nature of MWCNTs - PZT synthesised at 500 ºC for 1 h was proved by PFM. In the continuation of this work we developed a low cost methodology of coating MWCNTs using a hybrid sol-gel / hydrothermal method. In this case the FE used as a proof of concept was BT. BT is a well-known lead free perovskite used in many microelectronic applications. However, synthesis by solid state reaction is typically performed around 1100 to 1300 ºC what jeopardizes the combination with MWCNTs. We also illustrate the ineffectiveness of conventional hydrothermal synthesis in this process due the formation of carbonates, namely BaCO3. The grown MWCNTs - BT structures are ferroelectric and exhibit an electromechanical response (15 pm/V). These results have broad implications since this strategy can also be extended to other compounds of materials with high crystallization temperatures. In addition the coverage of MWCNTs with FE can be optimized, in this case with non covalent functionalization of the tubes, namely with sodium dodecyl sulfate (SDS). MWCNTs were used as templates to grow, in this case single phase multiferroic BFO nanorods. This work shows that the use of nitric solvent results in severe damages of the MWCNTs layers that results in the early oxidation of the tubes during the annealing treatment. It was also observed that the use of nitric solvent results in the partial filling of MWCNTs with BFO due to the low surface tension (<119 mN/m) of the nitric solution. The opening of the caps and filling of the tubes occurs simultaneously during the refluxing step. Furthermore we verified that MWCNTs have a critical role in the fabrication of monophasic BFO; i.e. the oxidation of CNTs during the annealing process causes an oxygen deficient atmosphere that restrains the formation of Bi2O3 and monophasic BFO can be obtained. The morphology of the obtained BFO nano structures indicates that MWCNTs act as template to grow 1D structure of BFO. Magnetic measurements on these BFO nanostructures revealed a week ferromagnetic hysteresis loop with a coercive field of 956 Oe at 5 K. We also exploited the possible use of vertically-aligned multiwall carbon nanotubes (VA-MWCNTs) as bottom electrodes for microelectronics, for example for memory applications. As a proof of concept BiFeO3 (BFO) films were in-situ deposited on the surface of VA-MWCNTs by RF (Radio Frequency) magnetron sputtering. For in situ deposition temperature of 400 ºC and deposition time up to 2 h, BFO films cover the VA-MWCNTs and no damage occurs either in the film or MWCNTs. In spite of the macroscopic lossy polarization behaviour, the ferroelectric nature, domain structure and switching of these conformal BFO films was verified by PFM. A week ferromagnetic ordering loop was proved for BFO films on VA-MWCNTs having a coercive field of 700 Oe. Our systematic work is a significant step forward in the development of 3D memory cells; it clearly demonstrates that CNTs can be combined with FE oxides and can be used, for example, as the next 3D generation of FERAMs, not excluding however other different applications in microelectronics.

Advanced monitoring of South Portugal water bodies towards WFD

The challenge on implementation of the EU Water Framework Directive (WFD) fosters the development of new monitoring methods and approaches. It is now commonly accepted that the use of classical monitoring campaigns in discrete point is not sufficient to fully assess and describe a water body. Due to this the WFD promote the use of modelling techniques in surface waters to assist all phases of the process, from characterisation and establishment of reference conditions to identification of pressures and assessment of impact. The work presented in this communication is based on these principles. A classical monitoring of the water status of the main transitional water bodies of Algarve (south of Portugal) is combined with advanced in situ water profiling and hydrodynamic, water quality and ecological modelling of the systems to build a complete description of its state. This approach extends spatially and temporally the resolution of the classical point sampling. The methodology was applied during a 12 month program in Ria Formosa coastal lagoon, the Guadiana estuary and the Arade estuary. The synoptic profiling uses an YSI 6600 EDS multi-parameter system attached to a boat and a GPS receiver to produce monthly synoptic maps of the systems. This data extends the discrete point sampling with laboratory analysis performed monthly in several points of each water body. The point sampling is used to calibrate the profiling system and to include variables, such as nutrients, not measured by the sensors. A total of 1427 samplings were performed for physical and chemical parameters, chlorophyll and microbiologic contamination in the water column. This data is used to drive the hydrodynamic, transport and ecological modules of the MOHID water modelling system (www.mohid.com), enabling an integrate description of the water column.

Compte rendu: Jannis Androutsopoulos (dir.) (2014), Mediatization and sociolinguistic change, Berlin/Boston, De Gruyter, coll. « Linguae & litterae. Publications of the School of Language & Literature Freiburg Institute for Advanced Studies, 36 », vii-557 p. [ISBN : 978-3-11-034357-1]

Résumé non disponible

Acoustic oceanographic buoy telemetry system: an ‘advanced’ sonobuoy that meets acoustic rapid environmental assessment requirements

The Acoustic Oceanographic Buoy (AOB) Telemetry System has been designed to meet acoustic rapid environmental assessment requirements. It uses a standard institute of Electrical and Electronics Engineers 802.11 wireless local area network (WLAN) to integrate the air radio network (RaN) and a hydrophone array and acoustic source to integrate the underwater acoustic network (AcN). It offers advantages including local data storage, dedicated signal processing, and global positioning system (GPS) timing and localization. The AOB can also be integrated with other similar systems, due to its WLAN transceivers, to form a flexible network and perform on-line high speed data transmissions. The AOB is a reusable system that requires less maintenance and can also work as a salt-water plug-and-play system at sea as it is designed to operate in free drifting mode. The AOB is also suitable for performing distributed digital signal processing tasks due to its digital signal processor facility.

Inappropriate medication use in long-term care facility residents with advanced Alzheimer’s disease and other dementias

Les personnes atteintes de démence sévère, résidant dans un centre d’hébergement et de soins de longue durée (CHSLD) et approchant la fin de leur vie, ne reçoivent pas systématiquement des soins palliatifs, malgré que ce niveau de soins soit le plus approprié. La plupart de ces personnes reçoivent également un grand nombre de médicaments dont les effets indésirables peuvent contribuer à des souffrances évitables. Une approche axée sur les soins palliatifs serait possiblement associée à une réduction de la charge médicamenteuse et, du même coup, à une prescription plus appropriée. Les objectifs de ce projet de recherche étaient de décrire l’usage des médicaments chez les résidents atteints de démence sévère en CHSLD, de comparer leur usage de médicaments à des critères de pertinence et d’évaluer si la mise en œuvre d’une approche axée sur les soins palliatifs était associée aux médicaments prescrits. Cette étude décrit l’usage des médicaments chez 215 sujets atteints de démence sévère et en fin de vie qui ont participé à une étude d’intervention quasi expérimentale menée dans quatre CHSLD du Québec sur la mise en œuvre d’une approche axée sur les soins palliatifs. L’utilisation des médicaments a été comparée à trois listes de critères pertinents publiés, soit ceux de Holmes, Rancourt et Kröger, en utilisant des statistiques descriptives. Les analyses sur l’usage de 412 médicaments différents chez 120 sujets du groupe expérimental et 95 sujets du groupe témoin ont montré que cette approche axée sur les soins palliatifs n’est pas associée à une prescription plus appropriée des médicaments chez ces personnes particulièrement vulnérables.

Men’s strategies for preserving emotional well-being in advanced prostate cancer: an interpretative phenomenological analysis

Objective This study explores men with advanced prostate cancers’ own practices for promoting and maintaining emotional well-being using Interpretative Phenomenological Analysis. Design Five men with advanced prostate cancer participated in face-to-face, semi-structured, in-depth interviews. Results Within rich narratives of lost and regained well-being, two super-ordinate themes emerged – ‘living with an imminent and uncertain death’ and ‘holding on to life.’ Well-being was threatened by reduced sense of the future, isolation and uncertainty. Yet, the men pursued well-being by managing their emotions, striving for the future whilst enjoying life in the present, taking care of their families and renegotiating purpose. Running through participant’s accounts was a preference for taking action and problem-solving. Sense of purpose, social connectedness and life-engagement were revealed as concepts central to improving well-being, indicating areas which practitioners could explore with men to help them re-establish personal goals and life-purpose. Conclusions The findings also add weight to the evidence base for the potential value of psychological interventions such as cognitive behaviour therapy and mindfulness in men with prostate cancer.

Advanced side information creation techniques and framework for Wyner-Ziv video coding

Recently, several distributed video coding (DVC) solutions based on the distributed source coding (DSC) paradigm have appeared in the literature. Wyner-Ziv (WZ) video coding, a particular case of DVC where side information is made available at the decoder, enable to achieve a flexible distribution of the computational complexity between the encoder and decoder, promising to fulfill novel requirements from applications such as video surveillance, sensor networks and mobile camera phones. The quality of the side information at the decoder has a critical role in determining the WZ video coding rate-distortion (RD) performance, notably to raise it to a level as close as possible to the RD performance of standard predictive video coding schemes. Towards this target, efficient motion search algorithms for powerful frame interpolation are much needed at the decoder. In this paper, the RD performance of a Wyner-Ziv video codec is improved by using novel, advanced motion compensated frame interpolation techniques to generate the side information. The development of these type of side information estimators is a difficult problem in WZ video coding, especially because the decoder only has available some reference, decoded frames. Based on the regularization of the motion field, novel side information creation techniques are proposed in this paper along with a new frame interpolation framework able to generate higher quality side information at the decoder. To illustrate the RD performance improvements, this novel side information creation framework has been integrated in a transform domain turbo coding based Wyner-Ziv video codec. Experimental results show that the novel side information creation solution leads to better RD performance than available state-of-the-art side information estimators, with improvements up to 2 dB: moreover, it allows outperforming H.264/AVC Intra by up to 3 dB with a lower encoding complexity.

Ensaios avançados com fibras ópticas = advanced characterization of optical fibers

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia de Electrónica e Telecomunicações

Sustentabilidade do SIG municipal da CM de Vila Franca de Xira - Operacionalização de um grupo de trabalho multidisciplinar, estruturalmente suportado pelo ArcGis Server Empertrise Advanced

Relatório de Estágio apresentado para cumprimento dos requisitos necessários à obtenção do grau de Mestre em Gestão do Território.

The removal of xenobiotic compounds from wastewater through the use of biological processes and advanced oxidation technologies

Dissertação apresentada para obtenção do Grau de Doutor em Engenharia Química e Bioquímica pela Universidade Nova de Lisboa, Faculdade de Ciências e Tecnologia

Development of advanced human robot interaction systems

O trabalho aqui apresentado é a Dissertação da minha Tese do curso de Mestrado em Engenharia Eletrotécnica e de Computadores do ISEP, realizada em parceria com o INESC TEC. O trabalho consiste no desenvolvimento de um sistema avançado de interação entre homem-robô, usando ferramentas de software livres e de domínio público e hardware pouco dispendioso e facilmente acessível. Pretende-se que o sistema desenvolvido possa ser adotado por pequenas ou micro empresas, daí a restrição monetária. Este tipo de empresas tem, por norma, uma capacidade de investimento pequena, e ficam impossibilitadas de aceder a este tipo de sistemas automatizados se estes forem caros. No entanto, o robô continua a ser um componente fundamental, sendo dispendioso. Os trabalhos realizados pelos sistemas robóticos podem por um lado, ser repetitivos sem necessidade de grandes ajustes; por outro lado, o trabalho a realizar pode ser bastante diverso, sendo necessários bastantes ajustes com (possivelmente) programação do robô. As empresas podem não ter disponível mão-de-obra qualificada para realização da programação do robô. Pretende-se então um sistema de “ensino” que seja simples e rápido. Este trabalho pretende satisfazer as necessidades de um sistema de interação homem-robô intuitivo mesmo para operadores que não estejam familiarizados com a robótica. Para simplificar a transferência de informação da tarefa a desempenhar pelo sistema robótico é usado um sistema de infravermelhos para delinear a operação a desempenhar, neste caso concreto uma operação de soldadura. O operador usa um apontador com marcadores, a posição destes marcadores é detetada usando duas câmaras para permitir o posicionamento tridimensional no espaço. As câmaras possuem filtros infravermelhos para separar o espectro de luz. Para o controlo do sistema e interface com o robô é usado um computador de baixos recursos computacionais e energéticos, e também de baixo custo. O sistema desenvolvido é portanto computacionalmente leve para poder ser executado neste computador.

Y-90-Ibritumomab Tiuxetan (Zevalin (R)) Consolidation of First Remission In Advanced-Stage Follicular Non-Hodgkin's Lymphoma: Updated Results After a Median Follow-up of 66.2 Months From the International, Randomized, Phase III First-Line Indolent Trial (FIT) In 414 Patients

The FIT trial was conducted to evaluate the safety and efficacy of 90Y-ibritumomab tiuxetan (0.4 mCi/kg; maximum dose 32 mCi) when used as consolidation of first complete or partial remission in patients with previously untreated, advanced-stage follicular lymphoma (FL). Patients were randomly assigned to either 90Y-ibritumomab treatment (n = 207) or observation (n = 202) within 3 months (mo) of completing initial induction therapy (chemotherapy only: 86%; rituximab in combination with chemotherapy: 14%). Response status prior to randomization did not differ between the groups: 52% complete response (CR)/CR unconfirmed (CRu) to induction therapy and 48% partial response (PR) in the 90Y-ibritumomab arm vs 53% CR/CRu and 44% PR in the control arm. The primary endpoint was progression-free survival (PFS) of the intent-to-treat (ITT) population. Results from the first extended follow-up after a median of 3.5 years revealed a significant improvement in PFS from the time of randomization with 90Y-ibritumomab consolidation compared with control (36.5 vs 13.3 mo, respectively; P < 0.0001; Morschhauser et al. JCO. 2008; 26:5156-5164). Here we report a median follow-up of 66.2 mo (5.5 years). Five-year PFS was 47% in the 90Y-ibritumomab group and 29% in the control group (hazard ratio (HR) = 0.51, 95% CI 0.39-0.65; P < 0.0001). Median PFS in the 90Y-ibritumomab group was 49 mo vs 14 mo in the control group. In patients achieving a CR/CRu after induction, 5-year PFS was 57% in the 90Y-ibritumomab group, and the median had not yet been reached at 92 months, compared with a 43% 5-year PFS in the control group and a median of 31 mo (HR = 0.61, 95% CI 0.42-0.89). For patients in PR after induction, the 5-year PFS was 38% in the 90Y-ibritumomab group with a median PFS of 30 mo vs 14% in the control group with a median PFS of 6 mo (HR = 0.38, 95% CI 0.27-0.53). Patients who had received rituximab as part of induction treatment had a 5-year PFS of 64% in the 90Y-ibritumomab group and 48% in the control group (HR = 0.66, 95% CI 0.30-1.47). For all patients, time to next treatment (as calculated from the date of randomization) differed significantly between both groups; median not reached at 99 mo in the 90Y-ibritumomab group vs 35 mo in the control group (P < 0.0001). The majority of patients received rituximab-containing regimens when treated after progression (63/82 [77%] in the 90Y-ibritumomab group and 102/122 [84%] in the control group). Overall response rate to second-line treatment was 79% in the 90Y-ibritumomab group (57% CR/CRu and 22% PR) vs 78% in the control arm (59% CR/CRu, 19% PR). Five-year overall survival was not significantly different between the groups; 93% and 89% in the 90Y-ibritumomab and control groups, respectively (P = 0.561). To date, 40 patients have died; 18 in the 90Y-ibritumomab group and 22 in the control group. Secondary malignancies were diagnosed in 16 patients in the 90Y-ibritumomab arm vs 9 patients in the control arm (P = 0.19). There were 6 (3%) cases of myelodysplastic syndrome (MDS)/acute myelogenous leukemia (AML) in the 90Y-ibritumomab arm vs 1 MDS in the control arm (P = 0.063). In conclusion, this extended follow-up of the FIT trial confirms the benefit of 90Y-ibritumomab consolidation with a nearly 3 year advantage in median PFS. A significant 5-year PFS improvement was confirmed for patients with a CR/CRu or a PR after induction. Effective rescue treatment with rituximab-containing regimens may explain the observed no difference in overall survival between both patient groups who were - for the greater part - rituximab-naïve.