Aquisição, processamento e análise de dados de sísmica de alta resolução na plataforma continental norte do Rio Grande do Norte: Vale inciso do rio açu

On the modern Continental Shelf to the north of Rio Grande do Norte state (NE Brazil) is located a paleo-valley, submerged during the last glacial sea-level lowstand, that marks continuation of the most important river of this area (Açu River). Despite the high level of exploration activity of oil industry, there is few information about shallow stratigraphy. Aiming to fill this gap, situated on the Neogene, was worked a marine seismic investigation, the development of a processing flow for high resolution data seismic, and the recognition of the main feature morphology of the study area: the incised valley of the River Açu. The acquisition of shallow seismic data was undertaken in conjunction with the laboratory of Marine Geology/Geophysics and Environmental Monitoring - GGEMMA of Federal University of Rio Grande do Norte UFRN, in SISPLAT project, where the geomorphological structure of the Rio paleovale Açu was the target of the investigation survey. The acquisition of geophysical data has been over the longitudinal and transverse sections, which were subsequently submitted to the processing, hitherto little-used and / or few addressed in the literature, which provided a much higher quality result with the raw data. Once proposed for the flow data was developed and applied to the data of X-Star (acoustic sensor), using available resources of the program ReflexW 4.5 A surface fluvial architecture has been constructed from the bathymetric data and remote sensing image fused and draped over Digital Elevation Models to create three-dimensional (3D) perspective views that are used to analyze the 3D geometry geological features and provide the mapping morphologically defined. The results are expressed in the analysis of seismic sections that extend over the region of the continental shelf and upper slope from mouth of the Açu River to the shelf edge, providing the identification / quantification of geometrical features such as depth, thickness, horizons and units seismic stratigraphyc area, with emphasis has been placed on the palaeoenvironmental interpretation of discordance limit and fill sediment of the incised valley, control by structural elements, and marked by the influence of changes in the sea level. The interpretation of the evolution of this river is worth can bring information to enable more precise descriptions and interpretations, which describes the palaeoenvironmental controls influencing incised valley evolution and preservation to provide a better comprehensive understanding of this reservoir analog system

Biodiversity of brachyuran crabs (Crustacea : Decapoda) from non-consolidated sublittoral bottom on the northern coast of São Paulo State, Brazil

The brachyuran community of the coast of São Paulo State is represented by about 188 species of crabs inhabiting different kinds of coastal marine environments. The biodiversity of brachyurans found on non-consolidated sublittoral bottom was investigated. The Ubatuba region (Ubatumirim, Ubatuba and Mar Virado bays, Couves and Mar Virado Islands, offshore region) was sampled for 3 years (1998-2000), at depths of 2-40 m. All sampling was performed using a fishing boat equipped with two double-rig nets. We collected 79 brachyuran species representing 9 superfamilies (4 Dromioidea, 1 Homoloidea, 2 Calappoidea, 5 Leucosioidea, 20 Majoidea, 7 Parthenopoidea, 17 Portunoidea, 18 Xanthoidea, and 5 Pinnotheroidea) and 41 genera. Ubatuba bay showed the greatest species richness with 50 species, followed by Ubatumirim with 45 and Mar Virado with 29. The number of species collected represents about 57% of the known species of crabs already reported for the shore of São Paulo State. It is worth noticing that this percentage is restricted only to non-consolidated sublittoral bottom. This fact indicates a great biodiversity of the habitat in this studied region, probably one to the diversity of habitat types present in the bays.

Gene expression modulation by chalcopyrite and bornite in Acidithiobacillus ferrooxidans

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Toxicity assessment and degradation of disperse azo dyes by photoelectrocatalytic oxidation on Ti/TiO2 nanotubular array electrodes

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Anthropotechnological analysis of industrial accidents in Brazil

The Brazilian Ministry of Labour has been attempting to modify the norms used to analyse industrial accidents in the country. For this purpose, in 1994 it tried to make compulsory use of the causal tree approach to accident analysis, an approach developed in France during the 1970s,without having previously determined whether it is suitable for use under the industrial safety conditions that prevail in most Brazilian firms. In addition, apposition from Brazilian employers has blocked the proposed changes to the norms. The present study employed anthropotechnology to analyse experimental application of the causal tree method to work-related accidents in industrial firms in the region of Botucatu, São Paulo. Three work-related accidents were examined in three industrial firms representative of local, national and multinational companies. on the basis of the accidents analysed in this study, the rationale for the use of the causal tree method in Brazil can be summarized for each type of firm as follows:the method is redundant if there is a predominance of the type of risk whose elimination or neutralization requires adoption of conventional industrial safety measures (firm representative of local enterprises); the method is worth while if the company's specific technical risks have already largely been eliminated (firm representative of national enterprises); and the method is particularly appropriate if the firm has a good safety record and the causes of accidents are primarily related to industrial organization and management (multinational enterprise).

A linear optimization approach to the combined production planning model

Two fundamental processes usually arise in the production planning of many industries. The first one consists of deciding how many final products of each type have to be produced in each period of a planning horizon, the well-known lot sizing problem. The other process consists of cutting raw materials in stock in order to produce smaller parts used in the assembly of final products, the well-studied cutting stock problem. In this paper the decision variables of these two problems are dependent of each other in order to obtain a global optimum solution. Setups that are typically present in lot sizing problems are relaxed together with integer frequencies of cutting patterns in the cutting problem. Therefore, a large scale linear optimizations problem arises, which is exactly solved by a column generated technique. It is worth noting that this new combined problem still takes the trade-off between storage costs (for final products and the parts) and trim losses (in the cutting process). We present some sets of computational tests, analyzed over three different scenarios. These results show that, by combining the problems and using an exact method, it is possible to obtain significant gains when compared to the usual industrial practice, which solve them in sequence. (C) 2010 The Franklin Institute. Published by Elsevier Ltd. All rights reserved.

Tinea nigra: Relato de caso e revisao da literatura brasileira

The authors present a clinical case of palmar Tinea nigra in a 19-year-old young woman. The Brazilian literature concerning Tinea nigra is discussed as well as the reports presented in Brazilian Congresses from 1985 to 1995. The data show that 63.3% of the cases occurred in patients younger than 20-years-old, they were more frequent among females and 90.5% were localized on the palms; among the cases reported in the Brazilian Congresses those of atypical localization as the back and the genital area are worth noticing.

Prevalence and associated factors for suicidal ideation and behaviors in obsessive-compulsive disorder

Introduction: Patients with obsessive-compulsive disorder (OCD) have historically been considered at low risk for suicide, but recent studies are controversial. Objective: To study the prevalence of suicidal thoughts and attempts in OCD patients and to compare those with and without suicidality according to demographic and clinical variables. Methods: Fifty outpatients with primary OCD (Diagnostic and Statistical Manual of Mental Disorders, Fourth Edition) from a Brazilian public university were evaluated. The Yale-Brown Obsessive-Compulsive Scale (Y-BOCS) was used to assess OCD severity, the Beck Depression Inventory to evaluate depressive symptoms and the Alcohol Use Disorders Identification Test to assess alcohol problems. Results: All patients had obsessions and compulsions, 64% a chronic fluctuating course and 62% a minimum Y-BOCS score of 16. Half of the patients presented relevant depressive symptoms, but only three had a history of alcohol problems. Seventy percent reported having already thought that life was not worth living, 56% had wished to be dead, 46% had suicidal ideation, 20% had made suicidal plans, and 10% had already attempted suicide. Current suicidal ideation occurred in 14% of the sample and was significantly associated with a Y-BOCS score ≥16. Previous suicidal thoughts were associated with a Beck Depression Inventory score ≥19. Conclusion: Suicidally has been underestimated in OCD and should be investigated in every patient, so that appropriate preventive measures can be taken.

Towards a theory of the small firm: theoretical aspects and some policy implications

Includes bibliography

Determinantes económicos del salario mínimo en países pequeños y abiertos: una aplicación para Centroamérica

Incluye Bibliografía

The Latin American development problem

Includes bibliography

Jaw musculature of the Meiglyptini (Aves: Piciformes: Picidae)

The Meiglyptini comprise eight species of woodpeckers grouped into three genera, two of which contain three species ( Meiglyptes and Mulleripicus), while one genus includes two species ( Hemicircus). The purpose of this study is to describe the mandibular apparatus found in six species of Meiglyptini and to compare them with each other and with other woodpecker species. The results reveal a number of structures that are worth mentioning: (i) the components of the external mandibular adductor system of Hemicircus concretus, particularly the M. adductor mandibulae externus caudalis medialis, are underdeveloped compared with the other investigated species; (ii) the muscles of the internal mandibular system are structurally different among Meiglyptes species and are less developed, both in size and in structure, in H. concretus; (iii) the M protractor quadrati is vestigial in Meiglyptes species; (iv) the muscles of the protractor system of the quadrate are relatively undeveloped in H. concretus; (v) most of the muscles of the pterygoideus system are structurally differentiated in Meiglyptes species. It appears that the complexity of the mandibular apparatus is associated with the type of food consumed, as the apparatus of the frugivorous species H. concretus is markedly different from that of the insectivorous species. © 2012 The Royal Swedish Academy of Sciences.

Markets and the State in the evolution of the "Prebisch manifesto"

Includes bibliography

Experimental research on the influence of the air humidity conditions in an air conditioning system

The factors that have influence on the energy consumption of a small air conditioning system that are worth mentioning are the efficiencies of the compressor, evaporator and condenser, the form that the refrigerant flow is controlled, the fan model used, and climatic conditions. Within the climate issue, an interesting factor is that the relative humidity when it comes to the effect that it causes, especially in the performance of the air condenser, which generally is not considered in the projects. This study aims to evaluate the influence of humidity on the coefficient of system performance (COP), seeking to quantify their influence when it happens. The tests were performed on a testing bench, mounted at the Laboratory for Energy Efficiency (LAMOTRIZ) UNESP-Campus Guaratinguetá. In the study, the wet bulb temperature was ranged, keeping the rotation of the scroll compressor with application of a frequency inverter in its best performance. The test bench is provided with a supervisory system of data collection that is also able to control all functions of the bench. In the results, there was a significant influence, particularly when comparing high humidity conditions with low humidity, noting that only over 65% relative humidity is that significant changes are observed in the COP of the system. © 2013 Elsevier Inc.

Variação lexical e sintática na produção escrita formal do português em Moçambique

Pós-graduação em Estudos Linguísticos - IBILCE