Step size control for efficient discrete element simulation

The step size determines the accuracy of a discrete element simulation. The position and velocity updating calculation uses a pre-calculated table and hence the control of step size can not use the integration formulas for step size control. A step size control scheme for use with the table driven velocity and position calculation uses the difference between the calculation result from one big step and that from two small steps. This variable time step size method chooses the suitable time step size for each particle at each step automatically according to the conditions. Simulation using fixed time step method is compared with that of using variable time step method. The difference in computation time for the same accuracy using a variable step size (compared to the fixed step) depends on the particular problem. For a simple test case the times are roughly similar. However, the variable step size gives the required accuracy on the first run. A fixed step size may require several runs to check the simulation accuracy or a conservative step size that results in longer run times. (C) 2001 Elsevier Science Ltd. All rights reserved.

Peacebuilding in East Timor

This essay analyses some of the political, economic and social challenges of East Timer's transition to independence. It scrutinizes the ethical dimensions of building peace in a territory devastated by the combined effect of Indonesia's colonial occupation and the violent militia attacks of September 1999. The most difficult task ahead does not lie in the physical rebuilding of the territory-gargantuan as it may be-but in the more intricate and long-term rehabilitation of a traumatized society. The latter involves competing Timorese factions as well as a range of international actors, including the United Nations Transitional Authority, foreign governments, business institutions and various multilateral and bilateral donors. each having their own organizational leitmotifs and policy priorities. If not managed carefully, the reconstruction process could further exacerbate existing societal tensions and complicate the starch for peace and reconciliation. The essay identifies a number of crucial components necessary to counter such risks, including the need to promote popular participation in the rebuilding process. Without the legitimacy created by strong community involvement and grassroots participation in decision making, the task of national reconstruction may well become overwhelmed by conflict.

An Ethics Core Curriculum for Australasian Medical Schools

Teaching ethics incorporates teaching of knowledge as well as skills and attitudes. Each of these requires different teaching and assessment methods. A core curriculum of ethics knowledge must address both the foundations of ethics and specific ethical topics. Ethical skills teaching focuses on the development of ethical awareness, moral reasoning, communication and collaborative action skills. Attitudes that are important for medical students to develop include honesty, integrity and trustworthiness, empathy and compassion, respect, and responsibility, as well as critical self-appraisal and commitment to lifelong education.

Curriculum development for professional ethics in Australian human service university programmes

Australian academics and practitioners in the human services are particularly susceptible to social, political and economic influences in respect of their relevance, viability and operations. In fact, it can be argued that the impact of these influences has placed human service practitioners and academics in a perpetual state of vulnerability. Australian universities have been challenged to make their programmes more relevant and viable to the community at large, and practitioners face increasing workloads with limited resources based on restricted fiscal allocation, and the changing relationship between government and service providers. Drawing on interview data from twenty-one (n = 21) practitioners, this article highlights their identified problems regarding the notion of professionalism in the human services with a particular focus on ethical dilemmas in human service practice. Gleaning these details will be a basis for recommending necessary professionalethics curricula content in human services programmes offered in Australian universities. Moreover, while the research data is Australian based, the authors contend that the universal theories and principles underpinning human service practice justify the significance and value of the data as an important source for international consideration in curriculum development of human service academic programmes.

Cohesion among nurses: a comparison of bedside vs. charge nurses' perceptions in Australian hospitals

Aim. This study examines the extent to which hospital nurses view their working environment in a positive sense, working as a cohesive group. Background. Despite the fact that nursing in Australia is now considered a profession, it has been claimed that nurses are an oppressed group who use horizontal violence, bullying and aggression in their interactions with one and other. Methods. After ethical approval, a random sample of 666 nurses working directly with patients and all 333 critical care nurses employed in three large tertiary Australian hospitals were invited to participate in the study in the late 1990s. A mailed survey examined the perceptions of interaction nurses had with each other. The hypothesis, that level of employment (either Level I bedside nurses or Level II/III clinical leaders) and area of work (either critical care or noncritical care) would influence perceptions of cohesion, as measured by the cohesion amongst nurses scale (CANS) was tested. Results. In total 555 (56%) surveys were returned. Of these, 413 were returned by Level I and 142 by Level II/III nurses. Of this sample, 189 were critical care and 355 noncritical care nurses. There was no difference between Level I and II/III nurses in mean CANS scores. It is interesting to note that the item rated most positively was, 'nurses on the units worked well together', however, the item rated least positive was 'staff can be really bitchy towards each other' for both Level I and II/III nurses. There was no difference in CANS scores between critical care and noncritical care nurses. Conclusions. Nurses working in Australian hospitals perceived themselves to be moderately cohesive but, as would be expected in other work settings, some negative perceptions existed.

Investigation of the effects of chrome ball charge on slurry rheology and milling performance

Ten surveys of the ball milling circuit at the Mt Isa Mines (MIM) Copper Concentrator were conducted aiming to identify any changes in slurry theology caused by the use of chrome balls charge, and the associated effect on grinding performance. Slurry theology was measured using an on-line viscometer. The data were mass balanced and analysed with statistical tools. Comparison of the rheogram demonstrated that slurry density and fines content affected slurry rheology significantly, while the effect of the chrome ball charge being negligible. Statistical analysis showed the effects of mill throughput and cyclone efficiency on the Grinding Index (a term describing the overall breakage). There was no difference in the Grinding Index between using the chrome ball charge and the ordinary steel ball charge. (C) 2002 Elsevier Science Ltd. All rights reserved.

The ethics of germ line gene manipulation - A five dimensional debate

Contributors to the debate surrounding the ethics of germ line gene manipulation have by and large concentrated their efforts on discussions of the potential risks that are associated with the use of this technology. Many international advisory committees have ruled out the acceptability of germ line gene manipulation at least for the time being. The purpose of this work is to generate much needed discussion on the many other ethical issues concerning the implementation of not only germ line gene manipulation but also other related biotechnologies. In this paper I systematically investigate and analyse the most salient issues put forward by proponents and opponents alike. I argue that if germ line manipulation proves to be a safe and effective procedure, then the principle of beneficence imposes on the medical profession a moral duty to pursue the technology.

The beliefs of nurses who were involved in a whistleblowing event

Background. Nursing codes of ethics bind nurses to the role of patient advocate and compel them to take action when the rights or safety of a patient are jeopardized. Reporting misconduct is known as whistleblowing and studies indicate that there are personal and professional risks involved in blowing the whistle. Aim. The aim of this study was to explore the beliefs of nurses who wrestled with this ethical dilemma. Design. A descriptive survey design was used to examine the beliefs of nurses in Western Australia who reported misconduct (whistleblowers) and of those who did not report misconduct (nonwhistleblowers). Methods. The instrument listed statements from current ethical codes, statements from traditional views on nursing and statements of beliefs related to the participant's whistleblowing experience. Respondents were asked to rate each item on a five-point Likert format which ranged from strongly agree to strongly disagree. Data were analysed using a Pearson's correlation matrix and one-way ANOVA. To further explore the data, a factor analysis was run with varimax rotation. Results. Results indicated that whistleblowers supported the beliefs inherent in patient advocacy, while nonwhistleblowers retained a belief in the traditional role of nursing. Participants who reported misconduct (whistleblowers) supported the belief that nurses were primarily responsible to the patient and should protect a patient from incompetent or unethical people. Participants who did not report misconduct (nonwhistleblowers) supported the belief that nurses are obligated to follow a physician's order at all times and that nurses are equally responsible to the patient, the physician and the employer. Conclusion. These findings indicate that nurses may respond to ethical dilemmas based on different belief systems.

Exact theory of sedimentation equilibrium made useful

The exact description of the thermodynamics of solutions has been used to describe, without approximation, the distribution of all the components of an incompressible solution in a centrifuge cell at sedimentation equilibrium. Thermodynamic parameters describing the interactions between solute components of known molar mass can be obtained by direct analysis of the experimental data. Interpretation of the measured thermodynamic parameters in terms of molecular interactions requires that an arbitrary distinction be made between nonassociative forces, like hard-sphere volume-exclusion and mean-field electrostatic repulsion or attraction, and specific short-range forces of association that give rise to the formation of molecular aggregates. Provided the former can be accounted for adequately, the effects of the latter can be elucidated in the form of good estimates of the equilibrium constants for the reactions of aggregation.

McCabe v Goliath: The case against British American tobacco Australia Services Ltd

Significance of the decision in McCabe v British American Tobacco Australia Services Ltd - ramifications for the possibilities for success of future litigation of this nature in Australia and overseas - ethical and public policy issues regarding the duties of lawyers to the courts and to their clients - whilst a lawyer's implication in the destruction of documents to prevent a fair trial ultimately involves stricter duties, it exposes a need for vigilance against the possibilities for corporations to act outside the public interest, if not the justice system.

Public Intellectuals, Book Culture and Civil Society

Introduction: the rise and rise of the public intellectual My starting point is the remarkable rise to prominence of public intellectuals – and talk about public intellectuals – over the last decade in Australia. Since 1997, especially, this has occurred around Indigenous questions with the result that issues such as the stolen generations, genocide, the apology and reconciliation have also gained new prominence. This is undeniably a good thing. New ways of thinking about history and the nation and new kinds of public ethical discourse have been put into circulation. History as battleground is preferable to the great Australian silence. And yet – my starting point is also the ambivalent effects and meanings of these recent developments, not least the way that the debates have centred so much around the figure of the 'public intellectual', the way that certain kinds of intellectuals and intellectual discourse have come to dominate the mainstream representation of the issues.

Discrete element modelling of the influence of lifters on power draw of tumbling mills

Crushing and grinding are the most energy intensive part of the mineral recovery process. A major part of rock size reduction occurs in tumbling mills. Empirical models for the power draw of tumbling mills do not consider the effect of lifters. Discrete element modelling was used to investigate the effect of lifter condition on the power draw of tumbling mill. Results obtained with PFC3D code show that lifter condition will have a significant influence on the power draw and on the mode of energy consumption in the mill. Relatively high lifters will consume less power than low lifters, under otherwise identical conditions. The fraction of the power that will be consumed as friction will increase as the height of the lifters decreases. This will result in less power being used for high intensity comminution caused by the impacts. The fraction of the power that will be used to overcome frictional resistance is determined by the material's coefficient of friction. Based on the modelled results, it appears that the effective coefficient of friction for in situ mill is close to 0.1. (C) 2003 Elsevier Science Ltd. All rights reserved.