Chk1 regulates the S phase checkpoint by coupling the physiological turnover and ionizing radiation-induced accelerated proteolysis of Cdc25A

Chk1 kinase coordinates cell cycle progression and preserves genome integrity. Here, we show that chemical or genetic ablation of human Chk1 triggered supraphysiological accumulation of the S phase-promoting Cdc25A phosphatase, prevented ionizing radiation (IR)-induced degradation of Cdc25A, and caused radioresistant DNA synthesis (RDS). The basal turnover of Cdc25A operating in unperturbed S phase required Chk1-dependent phosphorylation of serines 123, 178, 278, and 292. IR-induced acceleration of Cdc25A proteolysis correlated with increased phosphate incorporation into these residues generated by a combined action of Chk1 and Chk2 kinases. Finally, phosphorylation of Chk1 by ATM was required to fully accelerate the IR-induced degradation of Cdc25A. Our results provide evidence that the mammalian S phase checkpoint functions via amplification of physiologically operating, Chk1-dependent mechanisms.

Optimising high-intensity treadmill training using the running speed at maximal O-2 uptake and the time for which this can be maintained

The aim of this study was to compare the effects of two high-intensity, treadmill interval-training programs on 3000-m and 5000-m running performance. Maximal oxygen uptake ((V) over dot O-2max), the running speed associated with (V) over dot O-2max (nu (V) over dot O-2max), the time for which nu (V) over dot O-2max can be maintained (T-max), running economy (RE), ventilatory threshold (VT) and 3000-m and 5000-m running times were determined in 27 well-trained runners. Subjects were then randomly assigned to three groups; (1) 60% T-max (2) 70% T-max and (3) control. Subjects in the control group continued their normal training and subjects in the two T-max groups undertook a 4-week treadmill interval-training program with the intensity set at nu (V) over dot O-2max and the interval duration at the assigned T-max. These subjects completed two interval-training sessions per week (60% T-max = six intervals/session, 70% T-max group = five intervals/session). Subjects were re-tested on all parameters at the completion of the training program. There was a significant improvement between pre- and post-training values in 3000-m time trial (TT) performance in the 60% T-max group compared to the 70% T,,a, and control groups [mean (SE); 60% T-max = 17.6 (3.5) s, 70% T-max = 6.3 (4.2) s, control = 0.5 (7.7) s]. There was no significant effect of the training program on 5000-m TT performance [60% T-max = 25.8 (13.8) s, 70% T-max = 3.7 (11.6) s, control = 9.9 (13.1) s]. Although there were no significant improvements in (V) over dot O-2max, nu (V) over dot (2max) and RE between groups, changes in (V) over dot O-2max and RE were significantly correlated with the improvement in the 3000-m TT. Furthermore, VT and T-max were significantly higher in the 60% Tmax group post-compared to pre-training. In conclusion, 3000-m running performance can be significantly improved in a group of well-trained runners, using a 4-week treadmill interval training program at nu (V) over dot O-2max with interval durations of 60% T-max.

Coorte retrospectiva de crianças e adolescentes, infectados pelo HIV por transmissão vertical, no Espírito Santo : comorbidades, mortalidade e sobrevida

INTRODUÇÃO: O diagnóstico e terapia antirretroviral precoce em lactentes, infectados pelo HIV por transmissão vertical, reduz a progressão do HIV e comorbidades que podem levar ao óbito. OBJETIVO GERAL: Avaliar o perfil clínico e epidemiológico em uma coorte de crianças e adolescentes com aids, infectados por transmissão vertical do HIV, por um período de onze anos, atendidos em hospital estadual de referência, no Estado do Espírito Santo. OBJETIVOS ESPECÍFICOS: 1. Descrever a frequência das comorbidades diagnosticadas após o diagnóstico de HIV e verificar sua distribuição, segundo dados demográficos, epidemiológicos e clínicos, e segundo a classificação dos casos em uma coorte de crianças e adolescentes com aids. 2. Avaliar os fatores preditores de risco de progressão para aids e óbito e causas de morte. 3. Estimar a taxa de sobrevida. MÉTODOS: Coorte retrospectiva de crianças e adolescentes infectados pelo HIV, por transmissão vertical (TV), atendidas no Serviço de Atendimento Especializado (SAE) do Hospital Infantil Nossa Senhora da Glória (HINSG), de janeiro 2001 a dezembro 2011, em Vitória – ES/Brasil. A coleta de dados foi realizada em protocolo específico padronizado, e dados sobre as comorbidades, mortalidade e sua causa básica foram obtidos dos prontuários médicos, da Declaração de Óbito e do banco de dados SIM (Sistema de Informação sobre Mortalidade). O diagnóstico de aids e comorbidades foi de acordo com CDC (Centers for Disease Control and Prevention)/1994. RESULTADOS: Foi arrolado um total de 177 pacientes, sendo 97 (55%) do sexo feminino; 60 (34%) eram menores de1ano, 67 (38%) tinham de 1 a 5 anos e 50 (28%) tinham6 anos ou mais de idade no ingresso ao serviço. A mediana das idades na admissão foi de 30 meses (Intervalo Interquartis (IIQ) 25-75%: 5-72 meses). Em relação à classificação clínico-imunológica, 146 pacientes (82,5%) apresentavam a forma moderada/grave no momento do ingresso no Serviço e 26 (14,7%) foram a óbito. Os sinais clínicos mais frequentes foram hepatomegalia (81,62%), esplenomegalia (63,8%), linfadenopatia (68,4%) e febre persistente (32,8%). As comorbidades mais frequentes foram anemia (67,2%), pneumonia/sepses/meningite - primeiro episódio (64,2%), OMA/sinusite recorrente (55,4%), infecções bacterianas graves recorrentes (47,4%) e dermatites (43,1%). Encontrou-se associação entre classificação clínico-imunológica grave e ingresso no serviço com menos de um ano de idade com algumas comorbidades (p<0,001). O tempo total do acompanhamento dos pacientes foi de 11 anos, com mediana de cinco anos (IIQ: 2-8 anos). No final do período estudado, 132 (74,6%) pacientes estavam em acompanhamento, 11 (6,2%) foram transferidos para outros serviços eem oito (4,5%) houve perda de seguimento. Quanto ao óbito, observou-se uma redução de casos ao longo do tempo. A maioria dos pacientes que foram a óbito deu entrada no serviço com classificação clínica imunológica grave (77%-20/26), apresentava anemia moderada/grave e estava em uso de terapia antirretroviral (TARV) por mais de 3 meses (17/24-71%).Os principais fatores de risco para o óbito foram: faixa etária < 1 ano (p=0,005), pneumonia por P. jirovecii (p=0,010), percentual de linfócito T CD4+ nadir <15% (p=0,012), anemia crônica (p=0,012), estágio clínico imunológico grave (p=0,003), infecções bacterianas graves recorrentes(p=0,003) e tuberculose (p=0,037). Ter iniciado TARV antes dos 6 meses de vida (diagnóstico e tratamento precoces) foi associado à sobrevida(OR 2,86, [Intervalo de Confiança (IC) de 95%: 1,12-7,25] p=0,027).O principal diagnóstico registrado para os óbitos foram infecções bacterianas graves (12/21-57%). Foi encontrada uma elevada taxa de sobrevida, com 85,3% de probabilidade de sobrevivência por mais de 10 anos (IC 95% 9,6-10,7). CONCLUSÕES: A maioria das crianças teve diagnóstico tardio da infecção pelo HIV aumentando o risco de progressão para aids e óbito por falta de tratamento precoce. A tendência de mortalidade das crianças infectadas pelo HIV se mostrou uma constante com queda nos dois últimos anos do estudo, e ainda persistem as infecções bacterianas como maior causa de óbito. Portanto, melhoria no cuidado pré-natal e acompanhamento pediátrico com vista ao diagnóstico precoce das crianças infectadas verticalmente devem fazer parte do cuidado integral à criança com aids, o que poderia reduzir a mortalidade destas crianças.

Wetting response of KrF laser ablated polyimide surfaces

The wettability of polyimide surfaces microstructured using KrF laser radiation at fluences above the material ablation threshold was studied by static contact angle measurements. The laser-treated surfaces present a morphology consisting of conical features whose dimensions and areal density depend on the fluence. The effect of these parameters on the surface apparent contact angle depends on the wetting regime. When wetting occurs in the homogeneous regime, the apparent contact angle of the treated surfaces increases with the radiation fluence because the cone dimensions increase. In contrast, when wetting occurs in the heterogeneous regime, the apparent contact angle increases with the radiation fluence because the average distance between cones increases. The apparent water contact angle of the laser-treated surfaces can reach values as high as 162 degrees, as compared to 75 degrees for virgin polyimide.

Multi-scaled femtosecond laser structuring of stationary titanium surfaces

The evolution of the topography of titanium surfaces treated with femtosecond laser radiation in stationary conditions as a function of radiation fluence and number of laser pulses is investigated. Depending on the processing parameters, ripples, microcolumns, wavy or smooth surfaces can be obtained. The ripples predominate for fluences near the damage threshold of titanium (0.2+/-0.1) J/cm(2), while microcolumns form during the first 200 pulses for fluences between (0.6+/-0.2) and (1.7+/-0.2) J/cm(2). A wavy topography develops for fluences and number of pulses higher than (1.7+/-0.2) J/cm(2) and 300, respectively. A bimodal surface topography consisting of surface ripples overlapping a microcolumnar topography can be obtained if the surfaces are firstly treated to create microcolumns followed by laser treatment with a lower fluence near the ablation threshold of the material, in order to generate periodic ripple

Wetting behaviour of femtosecond laser textured Ti-6Al-4V surfaces

The aim of the present work was to investigate the wetting behaviour of biomedical grade Ti-6Al-4V alloy surfaces textured by a femtosecond laser treatment. The material was treated in ambient atmosphere using an Yb: KYW chirped-pulse-regenerative amplification laser with a wavelength of 1030 nm and a pulse duration of 500 fs. Four main types of surface textures were obtained depending on the processing parameters and laser treatment method. These textures consist of: (1) nanoscale laser-induced periodic surface structures (LIPSS); (2) nanopillars; (3) a bimodal roughness distribution texture formed of LIPSS overlapping microcolumns; (4) a complex texture formed of LIPSS overlapping microcolumns with a periodic variation of the columns size in the laser scanning direction. The wettability of the surfaces was evaluated by the sessile drop method using distilled-deionized (DD) water and Hank's balanced salt solution (HBSS) as testing liquids. The laser treated surfaces present a hydrophilic behaviour as well as a high affinity for the saline solution, with equilibrium contact angles in the ranges 24.1-76.2. for DD water and 8.4-61.8. for HBSS. The wetting behaviour is anisotropic, reflecting the anisotropy of the surface textures. (c) 2012 Elsevier B.V. All rights reserved.

Sub-micron structuring of silicon using femtosecond laser interferometry

We report the fabrication of planar sub-micron gratings in silicon with a period of 720 nm using a modified Michelson interferometer and femtosecond laser radiation. The gratings consist of alternated stripes of laser ablated and unmodified material. Ablated stripes are bordered by parallel ridges which protrude above the unmodified material. In the regions where ridges are formed, the laser radiation intensity is not sufficient to cause ablation. Nevertheless, melting and a significant temperature increase are expected, and ridges may be formed due to expansion of silicon during resolidification or silicon oxidation. These conclusions are consistent with the evolution of the stripes morphology as a function of the distance from the center of the grating. (C) 2013 Elsevier Ltd. All rights reserved.

Layer-by-layer immobilization of carbon dots fluorescent nanomaterials on single optical fiber

We report within this paper the development of a fiber-optic based sensor for Hg(II) ions. Fluorescent carbon nanoparticles were synthesized by laser ablation and functionalized with PEG200 and N-acetyl-l-cysteine so they can be anionic in nature. This characteristic facilitated their deposition by the layer-by-layer assembly method into thin alternating films along with a cationic polyelectrolyte, poly(ethyleneimine). Such films could be immobilized onto the tip of a glass optical fiber, allowing the construction of an optical fluorescence sensor. When immobilized on the fiber-optic tip, the resultant sensor was capable of selectively detecting sub-micromolar concentrations of Hg(II) with an increased sensitivity compared to carbon dot solutions. The fluorescence of the carbon dots was quenched by up to 44% by Hg(II) ions and interference from other metal ions was minimal.

Ablação de vias acessórias por radiofrequência: características electrofisiológicas, técnicas e protocolos - Relatório de atividades

Mestrado em Tecnologia de Diagnóstico e Intervenção Cardiovascular - Ramo de especialização: Intervenção Cardiovascular

Broad-temperature range spectroscopy of the two-centre modular redox metalloprotein Desulfovibrio desulfuricans desulfoferrodoxin

Dalton Trans., 2003, 3328-3338

Surface morphology and phase transformations of femtosecond laser-processed saphire

The morphological and structural modifications induced in sapphire by surface treatment with femtosecond laser radiation were studied. Single-crystal sapphire wafers cut parallel to the (0 1 2) planes were treated with 560 fs, 1030 nm wavelength laser radiation using wide ranges of pulse energy and repetition rate. Self-ordered periodic structures with an average spatial periodicity of similar to 300 nm were observed for fluences slightly higher than the ablation threshold. For higher fluences the interaction was more disruptive and extensive fracture, exfoliation, and ejection of ablation debris occurred. Four types of particles were found in the ablation debris: (a) spherical nanoparticles about 50 nm in diameter; (b) composite particles between 150 and 400 nm in size; (c) rounded resolidified particles about 100-500 nm in size; and (d) angular particles presenting a lamellar structure and deformation twins. The study of those particles by selected area electron diffraction showed that the spherical nanoparticles and the composite particles are amorphous, while the resolidified droplets and the angular particles, present a crystalline a-alumina structure, the same of the original material. Taking into consideration the existing ablation theories, it is proposed that the spherical nanoparticles are directly emitted from the surface in the ablation plume, while resolidified droplets are emitted as a result of the ablation process, in the liquid phase, in the low intensity regime, and by exfoliation, in the high intensity regime. Nanoparticle clusters are formed by nanoparticle coalescence in the cooling ablation plume. (C) 2013 Elsevier B.V. All rights reserved.

Laser surfasse patterning using a Michelson interferometer and a femtosecond laser radiation

We report on a simple method to obtain surface gratings using a Michelson interferometer and femtosecond laser radiation. In the optical setup used, two parallel laser beams are generated using a beam splitter and then focused using the same focusing lens. An interference pattern is created in the focal plane of the focusing lens, which can be used to pattern the surface of materials. The main advantage of this method is that the optical paths difference of the interfering beams is independent of the distance between the beams. As a result, the fringes period can be varied without a need for major realignment of the optical system and the time coincidence between the interfering beams can be easily monitored. The potential of the method was demonstrated by patterning surface gratings with different periods on titanium surfaces in air.

Sub-micron structuring of silicon using femtosecond laser interferometry

We report the fabrication of planar sub-micron gratings in silicon with a period of 720 nm using a modified Michelson interferometer and femtosecond laser radiation. The gratings consist of alternated stripes of laser ablated and unmodified material. Ablated stripes are bordered by parallel ridges which protrude above the unmodified material. In the regions where ridges are formed, the laser radiation intensity is not sufficient to cause ablation. Nevertheless, melting and a significant temperature increase are expected, and ridges may be formed due to expansion of silicon during resolidification or silicon oxidation. These conclusions are consistent with the evolution of the stripes morphology as a function of the distance from the center of the grating.

Contributo dos músculos respiratórios para a fisiopatologia da hipercápnia na doença pulmonar crónica estabilizada: parte 1 = The role of the respiratory muscles in the pathophisiology of chronic hypercapnia in clinically stable chronic obstructive pulmonary diseases: part 1

Rev Port Pneumol. VII(2): 191-208, 2001

Contributo dos músculos respiratórios para a fisiopatologia da hipercápnia na doença pulmonar crónica estabilizada : parte 2 = The role of the respiratory muscles in the pathophisiology of chronic hypercapnia in clinically stable chronic obstructive pulmonary diseases: part 2

Rev Port Pneumol. VII(2): 210-233, 2001