Faddeev-jackiw formalism for A topological-like oscillator in planar dimensions

The problem of a harmonic oscillator coupling to an electromagnetic potential plus a topological-like (Chern-Simons) massive term, in two-dimensional space, is studied in the light of the symplectic formalism proposed by Faddeev and Jackiw for constrained systems.

Quartic fermion self-interactions in two-dimensional gauge theories

In this work we discuss the effect of quartic fermion self-interacting terms on the dynamically generated photon masses in 1+1 dimensions, for vector, chiral, and non-Abelian couplings. In the vector and chiral cases we find exactly the dynamically generated mass modified by the quartic term while in the non-Abelian case we find the dynamically generated mass associated with its Abelian part. We show that in the three cases there is a kind of duality between the gauge and quartic couplings. We perform functional as well as operator treatments allowing for the obtention of both fermion and vector field solutions. The structures of the Abelian models in terms of θ vacua are also addressed.

Integrability and conformal symmetry in higher dimensions: A model with exact hopfion solutions

We use ideas on integrability in higher dimensions to define Lorentz invariant field theories with an infinite number of local conserved currents. The models considered have a two-dimensional target space. Requiring the existence of lagrangean and the stability of static solutions singles out a class of models which have an additional conformal symmetry. That is used to explain the existence of an ansatz leading to solutions with non-trivial Hopf charges. © SISSA/ISAS 2002.

Classes of exact wave functions for general time-dependent Dirac Hamiltonians in 1+1 dimensions

The construction of two classes of exact solutions for the most general time-dependent Dirac Hamiltonian in 1+1 dimensions was discussed. The extension of solutions by introduction of a time-dependent mass was elaborated. The possibility of existence of a generalized Lewis-Riesenfeld invariant connected with such solutions was also analyzed.

Basin problem for Hénon-like attractors in arbitrary dimensions

We prove that Hénon-like strange attractors of diffeomorphisms in any dimensions, such as considered in [2],[7], and [9] support a unique Sinai-Ruelle-Bowen (SRB) measure and have the no-hole property: Lebesgue almost every point in the basin of attraction is generic for the SRB measure. This extends two-dimensional results of Benedicks-Young [4] and Benedicks-Viana [3], respectively.

Interaction between wave and coastal structure: Validation of two lagrangian numerical models with experimental results marine 2011

Numerical modeling of the interaction among waves and coastal structures is a challenge due to the many nonlinear phenomena involved, such as, wave propagation, wave transformation with water depth, interaction among incident and reflected waves, run-up / run-down and wave overtopping. Numerical models based on Lagrangian formulation, like SPH (Smoothed Particle Hydrodynamics), allow simulating complex free surface flows. The validation of these numerical models is essential, but comparing numerical results with experimental data is not an easy task. In the present paper, two SPH numerical models, SPHysics LNEC and SPH UNESP, are validated comparing the numerical results of waves interacting with a vertical breakwater, with data obtained in physical model tests made in one of the LNEC's flume. To achieve this validation, the experimental set-up is determined to be compatible with the Characteristics of the numerical models. Therefore, the flume dimensions are exactly the same for numerical and physical model and incident wave characteristics are identical, which allows determining the accuracy of the numerical models, particularly regarding two complex phenomena: wave-breaking and impact loads on the breakwater. It is shown that partial renormalization, i.e. renormalization applied only for particles near the structure, seems to be a promising compromise and an original method that allows simultaneously propagating waves, without diffusion, and modeling accurately the pressure field near the structure.

Social dimensions of macroeconomic policy: report of the Executive Committee on Economic and Social Affairs of the United Nations

Introduction The social agenda is long-term in nature, in the sense that poverty alleviation along with a better distribution of income, wealth and opportunities are long-term goals. A sound macroeconomic policy, on the other hand, has to do largely with the consistent management of short-term policy instruments pursuing a sustainable and predictable pace for aggregate economic variables and major prices (wages, inflation, interest rates and exchange rates). In spite of the different arena and rationale in which they play, there are strong links between the two. First and most obvious, macroeconomic adjustment and structural reform are more likely to be sustainable when they are equitable. Second, social intervention —i.e., policies, programmes and reforms aimed at improving social performance in the long run—, needs stable funding which is not always available in view of macroeconomic constraints. Third, macroeconomic instability —especially episodes of recession or hyperinflation— increases poverty and inequality, while restoring macroeconomic equilibrium does not restore previous social balances. Finally, there is no unique macroeconomic policy mix to tackle a given situation, and the policy options may not be neutral from a social standpoint. Monetary, fiscal and exchange rate policies, together with structural reform, have major consequences for the social wellbeing of societies, not only in terms of protection against shocks and crises but also in terms of equity. Many, if not all, of the necessary social policies are of a domestic nature. This report thus concentrates on domestic strategies aimed at maximizing the linkages between consistent macroeconomic policies and social progress. Pursuing them, however, depends to a considerable extent on the international enabling environment in which the global financial system, the unsettled debt crisis and increasing ODA flows play a significant role. Countries operate in a world economy where market players everywhere immediately scrutinize domestic monetary, financial or fiscal policy decisions and the performance of exchange rate regimes of individual countries. Under these conditions, the room for manoeuvre of policymakers has become considerably constrained. Consequently, it is becoming increasingly complex to incorporate the social dimensions into such policy decisions, to the extent that external analysts consider that authorities are sacrificing sound macroeconomic policies. The main message of the report is that the expediency of short-term economic efficiency as embedded in much of the advice on macroeconomic stability needs to be tempered by long-term development objectives. The report starts with a short historical background which describes the ascendancy of macroeconomic policies over social development policies (chapter I). It continues with an evaluation of the relation between macroeconomic consistency and social effort (chapter II), and the importance of sustainable and stable growth for social progress (chapter III). The report then turns to the need for an equity-enhancing growth strategy (chapter IV) and an analysis of the priorities of social policies in an integrated approach to growth (chapter V). The final chapter adds some final institutional remarks.

Compared morphology of the immatures of males of two urban ant species of camponotus

The immatures of males of two species of Camponotus ants (Hymenoptera: Formicidae) are described and compared by light and electron microscopy. The numbers of larval instars were determined: Camponotus rufipes Fabricius (Hymenoptera: Formicidae) have four instars; and Camponotus vittatus Forel have three. Male larvae of the two species are similar to previously described Camponotus larvae, sharing the following traits: basic shape of body and mandible, presence of 'chiloscleres', 'praesaepium' (some specimens), labial pseudopalps, and ten pairs of spiracles. However, larvae of the two species can be separated by bodily dimensions and based on their hair number and types. Worker larvae of C. vittatus previously described are extensively similar to male larvae, with only a few inconspicuous differences that may result from intraspecific variation or sexual differences.

Influence of buccal bony crest width on marginal dimensions of peri-implant hard and soft tissues after implant installation. An experimental study in dogs

Aim: To evaluate the influence of the width of the buccal bony wall on hard and soft tissue dimensions following implant installation. Material and methods: Mandibular premolars and first molars of six Labrador dogs were extracted bilaterally. After 3 months of healing, two recipient sites, one on each side of the mandible, were prepared in such a way as to obtain a buccal bony ridge width of about 2 mm in the right (control) and 1 mm in the left sides (test), respectively. Implants were installed with the coronal margin flush with the buccal alveolar bony crest. Abutments were placed and the flaps were sutured to allow a non-submerged healing. After 3 months, the animals were euthanized and ground sections obtained. Results: All implants were completely osseointegrated. In respect to the coronal rough margin of the implant, the most coronal bone-to-implant contact was apically located 1.04 ± 0.91 and 0.94 ± 0.87 mm at the test and control sites, respectively, whereas the top of the bony crest was located 0.30 ± 0.40 mm at the test and 0.57 ± 0.49 mm at the control sites. No statistically significant differences were found. A larger horizontal bone resorption, however, evaluated 1 mm apically to the rough margin, was found at the control (1.1 ± 0.7 mm) compared to the test (0.3 ± 0.3 mm) sites, the difference being statistically significant. A thin peri-implant mucosa (2.4-2.6 mm) was found at implant installation while, after 3 months of healing, a biological width of 3.90-4.40 mm was observed with no statistically significant differences between control and test sites. Conclusions: A width of the buccal bony wall of 1or 2 mm at implant sites yielded similar results after 3 months of healing in relation of hard tissue and soft tissues dimensions after implant installation. © 2012 John Wiley & Sons A/S.

Two matrix-based lattice construction techniques

Let m and n be integers greater than 1. Given lattices A and B of dimensions m and n, respectively, a technique for constructing a lattice from them of dimension m+n-1 is introduced. Furthermore, if A and B possess bases satisfying certain conditions, then a second technique yields a lattice of dimension m+n-2. The relevant parameters of the new lattices are given in terms of the respective parameters of A,B, and a lattice C isometric to a sublattice of A and B. Denser sphere packings than previously known ones in dimensions 52, 68, 84, 248, 520, and 4098 are obtained. © 2012 Elsevier Inc. All rights reserved.

Continuous vs. segmented second-dimension system gradients for comprehensive two-dimensional liquid chromatography of sugarcane (Saccharum spp.)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Anomalous gauge couplings from composite Higgs and warped extra dimensions

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Stable and mobile excited two-dimensional dipolar Bose-Einstein condensate solitons

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Massive spin-2 theories in arbitrary D>= 3 dimensions

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Dental caries related to quality of life in two Brazilian adolescent groups: a cross-sectional randomised study

Objectives: To analyse dental caries-related quality of life (QoL) in adolescent (1519-year-old) subjects in a suburban area (SA) and a downtown area (DA) of Bauru, Sao Paulo, Brazil, in 2009. Methods: This was a cross-sectional, randomised study. The sample consisted of 185 and 147 adolescents from the SA and DA, respectively. The caries index used was that for decayed, missing and filled teeth (DMFT) (World Health Organization criteria). The 14-item Oral Health Impact Profile (OHIP-14) was used to assess QoL. The non-parametric MannWhitney test, Spearmans correlation coefficient and chi-squared test were used in the statistical analysis. Results: The DMFT index, Significant Caries (SiC) Index and percentage of caries-free students were similar (P > 0.05) between these populations, but findings on the Care Index differed (P < 0.05). There was a correlation between the DMFT index and OHIP-14 score in SA subjects (mean DMFT index = 3.01) in the dimensions of physical pain (r = 0.25; P < 0.01) and psychological disability (r = 0.17; P = 0.02). The DMFT index in DA subjects (mean DMFT index = 2.95) showed a correlation with functional limitation (r = 0.19; P = 0.02). The correlation in SA subjects between the caries component (mean = 1.22) of the DMFT index and OHIP-14 was significant only for the physical pain dimension (r = 0.16; P = 0.03). In DA subjects, correlations between the caries component (mean = 0.37) and all dimensions of OHIP-14 were statistically significant (P < 0.05). Conclusions: Despite the similarities in means in the DMFT index, the SiC Index and the caries-free percentage of subjects in both localities, access to dental treatment proved to be less effective for SA adolescents. Physical pain and psychological disability were the most frequent negative manifestations of impact on QoL. The SA adolescents were more negatively affected by dental caries in terms of QoL.