Analisi del comportamento a caldo dell'acciaio AISI - H11 per la stima della vita utile di matrici per estrusione

The effect of process parameters on the creep-fatigue behavior of a hot-work tool steel for aluminum extrusion die was investigated through a technological test in which the specimen geometry resembled the mandrel of a hollow extrusion die. Tests were performed on a Gleeble thermomechanical simulator by heating the specimen using joule’s effect and by applying cyclic loading up to 6.30 h or till specimen failure. Displacements during the tests at 380, 490, 540 and 580°C and under the average stresses of 400, 600 and 800 MPa were determined. In the first set of test a dwell time of 3 min was introduced during each of the tests to understand the creep behavior. The results showed that the test could indeed physically simulate the cyclic loading on the hollow die during extrusion and reveal all the mechanisms of creep-fatigue interaction. In the second set a pure fatigue laod were induced and in the third set a static creep load were induced in the specimens. Furher type of tests, finite element and microstructural analysis were presented.

Enzimi, acidi organici ed altri metaboliti coinvolti nella patogenesi di Penicillium spp

Blue mould caused by Penicillium expansum Link is one of the most destructive rot of pome fruit in all growing areas (Snowdon, 1990; Jones and Aldwinckle, 1991; Tonini,1996) In the past, Penicillium rot has been controlled by fungicide postharvest treatment mainly by thiabendazole (TBZ) and benomyl (Hardenburg and Spalding, 1972), but their intense use produced the appearance of resistant strains with a great reduction of their activity The aims of the present study were to characterize the isolates of Pencillium sp causing blue mold on pear in Italy by physiological and biochemical parameters. In particular differencing also the behavior of isolates to relationship with sensitivity or resistance to TBZ treatments. We have examined the early stage of infection in relation to enzyme activity, local modulation of pH, production of organic acids, and to secondary metabolism of pathogen. The results described here confirm that the majority of P. expansum isolates from pears packing houses are resistant to TBZ, Among the TBZ-resistant isolates scored in this work, different isolates (RR) showed higher percentage of conidial germination on TBZ-amended medium compared to non amended medium. This may indicate a stimulatory effect of TBZ on conidial germination. Therefore TBZ treatments are not only ineffective for controlling P. expansum, but they may also increase the severity of blue mould on fruits. In the absence of fungicide, isolates showed a significant difference for infection severity, R and RR isolates are characterized by higher pathogenic fitness on fruits, producing larger lesions than S isolates. These data are supported by the study with laboratory-induced resistant isolates, which shows the lack of correlation between TBZ resistance and osmotic sensitivity, and highlights the association between TBZ resistance and infection severity (Baraldi et al 2003). Enzymatic screening gave a positive reaction to esterase, urease, pectinase activity, in addition, the pathogen is able to synthesize a complex enzyme act to degrade the main components of the cell wall especially pectin and cellulose. Isolated sensitive and resistant are characterized by a good activity of pectinase, especially from poligactoronase, which, as already reported by several studies (D'hallewin et al, 2004; Prusky et al, 2004), are the basis of degradative process of cell wall. Also, although the measure was minor also highlighted some activities of cellulase, but even note in the production of this kind of cellulase and hemicellulase P. Expansum were not targeted, studies have found no other source of information in this regard. Twenty isolates of Penicillium expansum, were tested in vitro ad in vivo for acid production ability and pH drop. We have found that modulation of pH and the organic acids extrusion were influence to various parameter:  Initial pH: in general, the greatest reduction of pH was observed in isolates grown at pH 7, except for four isolates that maintained the pH of the medium close to 7, the others significantly decreased the pH, ranging from 5.5 to 4.1.. In extreme acid condition (pH 3,0) growth and modulation of pH is most lower respect optimal condition (pH 5,0). Also isolates R and RR have showed a greater adaptation to environmental condition more than isolates S.  Time: although the acidification continues for some days, PH modulation is strongest in early hours (48-72 hours)of inoculation process. Time also affects the quality of organic acids, for example in vitro results showed an initial abundant production of succinc acid, followed to important production of galacturoinc acid.  Substrates: there are many differences for the type of acids produced in vitro and in vivo. Results showed in vivo an abundant production of galacturonic, malic, and citric acids and some unknown organic acids in smaller concentrations. Secondary metabolite analysis revealed intra-specific differences, and patulin was found in all isolates, but most significant reduction was observed between in vitro and in vivo samples. There was no correlation between the concentration of patulin, and the percentage of infected fruits, but sample with a lower infection severity of rotten area than the others, showed a significantly lower mycotoxin concentration than samples with a higher lesion diameter of rotten area. Beyond of patulin was detected the presence of another secondary metabolite, penitrem A.

Correlazioni tra proprietá reologiche, struttura e processabilitá di blend di LLDPE/LDPE

Polymer blends constitute a valuable way to produce relatively low cost new materials. A still open question concerns the miscibility of polyethylene blends. Deviations from the log-additivity rule of the newtonian viscosity are often taken as a signature of immiscibility of the two components. The aim of this thesis is to characterize the rheological behavior in shear and elongation of five series of LLDPE/LDPE blends whose parent polymers have been chosen with different viscosity and SCB content and length. Synergistic effects have been measured for both zero shear viscosity and melt strength. Both SCB length and viscosity ratio between the components have been found to be key parameters for the miscibility of the pure polymers. In particular the miscibility increases with increasing SCB length and with decreasing the LDPE molecular weight and viscosity. This rheological behavior has significant effects on the processability window of these blends when the uni or biaxial elongational flows are involved. The film blowing is one of the processes for which the synergistic effects above mentioned can be crucial. Small scale experiments of film blowing performed for one of the series of blends has demonstrated that the positive deviation of the melt strength enlarges the processability window. In particular, the bubble stability was found to improve or disappear when the melt strength of the samples increased. The blending of LDPE and LLDPE can even reduce undesired melt flow instability phenomena widening, as a consequence, the processability window in extrusion. One of the series of blends has been characterized by means of capillary rheometry in order to allow a careful morphological analysis of the surface of the extruded polymer jets by means of Scanning Electron Microscopy (SEM) with the aim to detect the very early stages of the small scale melt instabilty at low shear rates (sharksin) and to follow its subsequent evolution as long as the shear rate was increased. With this experimental procedure it was possible to evaluate the shear rate ranges corresponding to different flow regions: smooth extrudate surface (absence of instability), sharkskin (small scale instability produced at the capillary exit), stick-slip transition (instability involving the whole capillary wall) and gross melt fracture (i.e. a large scale "upstream" instability originating from the entrance region of the capillary). A quantitative map was finally worked out using which an assessment of the flow type for a given shear rate and blend composition can be predicted.

Struktur und rheologische Eigenschaften von PS-PI und PS-PB Blockcopolymeren

In der vorliegenden Arbeit wurde das Orientierungsverhalten der Mikrophasenseparation von industriellen und eigens synthetisierten Blockcopolymeren unter Extrusion untersucht.Dabei stellte sich heraus, daß bis auf eine Probe mit hexagonaler Morphologie die Mikrophasenseparationen der untersuchten Systeme unter dem Einfluß der Scherströmung derart in Extrusionsrichtung gedehnt werden, daß eine Art 'pseudo-lamellare' Morphologie entsteht. Aus Röntgenstreumessungen wurde die Güte dieser Orientierung in Form von Ordnungsparametern bestimmt. Dabei zeigte sich, daß der Orientierungsgrad der Proben deutlich von der Scherrate der Extrusion abhängt.Mit Hilfe von Zugversuchen konnte die mechanische Festigkeit der untersuchten Extrudate analysiert werden, wobei sich eine dem Ordnungsgrad analoge Scherratenabhängigkeit zeigte. Somit hat die rheologische Beanspruchung der Materialien einen deutlichen Einfluß auf deren mechanische Festigkeit.Im zweiten Teil der vorliegenden Arbeit wurde die Orientierung und die Reorientierung einer lamellaren Morphologie durch oszillatorische Verscherung mit großen Amplituden (LAOS) untersucht.Bei der Untersuchung des Orientierungsexperimentes zeigte sich, daß die exponentielle Abnahme der relativen Intensität des 3. Obertons (I3/I1) des fouriertransformierten Spektrums des Drehmomentes dazu genutzt werden konnte, um die Kinetik des Orientierungsprozesses zu bestimmen.Bei der Untersuchung des Umorientierungsprozesses konnte gezeigt werden, daß die nicht-lineare mechanische Antwort geeignet ist, um die Entwicklung bimodaler Orientierungsverteilungen zu verfolgen.

Contribution of tectonic processes to the exhumation of the Cycladic blueschist unit, Greece and Turkey

In dieser Studie werden strukturgeologische, metamorphe und geochronologische Daten benutzt, um eine Quantifizierung tektonischer Prozesse vorzunehmen, die für die Exhumierung der Kykladischen Blauschiefereinheit in der Ägäis und der Westtürkei verantwortlich waren. Bei den beiden tektonischen Prozessen handelt es sich um: (1) Abschiebungstektonik und (2) vertikale duktile Ausdünnung. Eine finite Verformungsanalyse an Proben der Kykladischen Blauschiefereinheit ermöglicht eine Abschätzung des Beitrags von vertikaler duktiler Ausdünnung an der gesamten Exhumierung. Kalkulationen mit einem eindimensionalen, numerischen Model zeigt, daß vertikale duktile Ausdünnung nur ca. 10% an der gesamten Exhumierung ausmacht. Kinematische, metamorphe und geochronologische Daten erklären die tektonische Natur und die Evolution eines extensionalen Störungssystems auf der Insel Ikaria in der östlichen Ägäis. Thermobarometrische Daten lassen erkennen, daß das Liegende des Störungssystems aus ca. 15 km Tiefe exhumiert wurde. Sowohl Apatit- und Zirkonspaltspurenalter als auch Apatit (U-Th)/He-Alter zeigen, daß sich das extensionale Störungssystem zwischen 11-3 Ma mit einer Geschwindigkeit von ca. 7-8 km/Ma bewegte. Spät-Miozäne Abschiebungen trugen zur Exhumierung der letzten ~5-15 km der Hochdruckgesteine bei. Ein Großteil der Exhumierung der Kykladischen Blauschiefereinheit muß vor dem Miozän stattgefunden haben. Dies wird durch einen Extrusionskeil erklärt, der ca. 30-35 km der Kykladischen Blauschiefereinheit in der Westtürkei exhumierte. 40Ar/39Ar und 87Rb/86Sr Datierungen an Myloniten des oberen Abschiebungskontakts zwischen der Selçuk Decke und der darunterliegenden Ampelos/Dilek Decke der Kykladischen Blauschiefereinheit als auch des unteren Überschiebungskontakts zwischen der Ampelos/Dilek Decke und den darunterliegenden Menderes Decken zeigt, daß sich beide mylonitische Zonen um ca. ~35 Ma formten, was die Existenz eines Spät-Eozänen/Früh-Oligozänen Extrusionskeils beweist.

Control of the long-range self-organization of polycyclic aromatic hydrocarbons for device applications

Electronic devices based on organic semiconductors have gained increased attention in nanotechnology, especially applicable to the field of field-effect transistors and photovoltaic. A promising class of materials in this reseach field are polycyclic aromatic hydrocarbons (PAHs). Alkyl substitution of these graphenes results in the selforganization into one-dimensional columnar superstructures and provides solubility and processibility. The nano-phase separation between the π-stacking aromatic cores and the disordered peripheral alkyl chains leads to the formation of thermotropic mesophases. Hexa-peri-hexabenzocoronenes (HBC), as an example for a PAH, exhibits some of the highest values for the charge carrier mobility for mesogens, which makes them promising candidates for electronic devices. Prerequisites for efficient charge carrier transport between electrodes are a high purity of the material to reduce possible trapping sites for charge carriers and a pronounced and defect-free, long-range order. Appropriate processing techniques are required to induce a high degree of aligned structures in the discotic material over macroscopic dimensions. Highly-ordered supramolecular structures of different discotics, in particular, of HBC derivatives have been obtained by solution processing using the zone-casting technique, zone-melting or simple extrusion. Simplicity and fabrication of highly oriented columnar structures over long-range are the most essential advantages of these zone-processing methods. A close relation between the molecular design, self-aggregation and the processing conditions has been revealed. The long-range order achieved by the zone-casting proved to be suitable for field effect transistors (FET).

1-, 2- and 3-dimensional phenylene-based materials for optoelectronic applications

A series of oligo-phenylene dendronised conjugated polymers was prepared. The divergent synthetic approach adopted allowed for the facile synthesis of a range of dendronised monomers from a common intermediate, e.g. first and second generation fluorene. Only the polymerisation of the first generation and alkylarylamine substituted dendronised fluorene monomers yielded high molecular weight materials, attributed to the low solubility of the remaining dendronised monomers. The alkylarylamine substituted dendronised poly(fluorene) was incorporated into an organic light emitting diode (OLED) and exhibited an increased colour stability in air compared to other poly(fluorenes). The concept of dendronisation was extended to poly(fluorenone), a previously insoluble material. The synthesis of the first soluble poly(fluorenone) was achieved by the incorporation of oligo-phenylene dendrons at the 4-position of fluorenone. The dendronisation of fluorenone allowed for a polymer with an Mn of 4.1 x 104 gmol-1 to be prepared. Cyclic voltammetry of the dendronised poly(fluorenone) showed that the electron affinity of the polymer was high and that the polymer is a promising n-type material. A dimer and trimer of indenofluorene (IF) were prepared from the monobromo IF. These oligomers were investigated by 2-dimensional wide angle x-ray spectroscopy (2D-WAXS), polarised optical microscopy (POM) and dielectric spectroscopy, and found to form highly ordered smetic phases. By attaching perylene dye as the end-capper on the IF oligomers, molecules that exhibited efficient Förster energy transfer were obtained. Indenofluorene monoketone, a potential defect structure for IF based OLED’s, was synthesised. The synthesis of this model defect structure allowed for the long wavelength emission in OLED’s to be identified as ketone defects. The long wavelength emission from the indenofluorene monoketone was found to be concentration dependent, and suggests that aggregate formation is occurring. An IF linked hexa-peri-hexabenzocoronene (HBC) dimer was synthesised. The 2D-WAXS images of this HBC dimer demonstrate that the molecule exhibits intercolumnar organisation perpendicular to the extrusion direction. POM images of mixtures of the HBC dimer mixed with an HBC with a low isotropic temperature demonstrated that the HBC dimer is mixing with the isotropic HBC.

Lattice preferred orientation in omphacite: Examples from the Tauern Window, Austria and the Western Gneiss Region, Norway

It is lively debated how eclogites find their way from deep to mid-crustal levels during exhumation. Different exhumation models for high-pressure and ultrahigh-pressure rocks were suggested in previous studies, based mainly on field observations and less on microstructural studies on the exhumed rocks. The development and improvement of electron microscopy techniques allows it, to focus interest on direct investigations of microstructures and crystallographic properties in eclogites. In this case, it is of importance to study the applicability of crystallographic measurements on eclogites for exhumation processes and to unravel which processes affect eclogite textures. Previous studies suggested a strong relationship between deformation and lattice preferred orientation (LPO) in omphacite but it is still unclear if the deformation is related to the exhumation of eclogites. This study is focused on the questions which processes affect omphacite LPO and if textural investigations of omphacite are applicable for studying eclogite exhumation. Therefore, eclogites from two examples in the Alps and in the Caledonides were collected systematically and investigated with respect to omphacite LPO by using the electron backscattered diffraction (EBSD) technique. Omphacite textures of the Tauern Window (Austria) and the Western Gneiss Region (Norway) were studied to compare lattice preferred orientation with field observations and suggested exhumation models from previous studies. The interpretation of omphacite textures, regarding the deformation regime is mainly based on numerical simulations in previous studies. Omphacite LPO patterns of the Eclogite Zone are clearly independent from any kind of exhumation process. The textures were generated during omphacite growth on the prograde path of eclogite development until metamorphic peak conditions. Field observations in the Eclogite Zone show that kinematics in garnet mica schist, surrounding the eclogites, strongly indicate an extrusion wedge geometry. Stretching lineations show top-N thrusting at the base and a top-S normal faulting with a sinistral shear component at the top of the Eclogite Zone. The different shear sense on both sides of the unit does not affect the omphacite textures in any way. The omphacite lattice preferred orientation patterns of the Western Gneiss Region can not be connected with any exhumation model. The textures were probably generated during the metamorphic peak and reflect the change from subduction to exhumation. Eclogite Zone and Western Gneiss Region differ significantly in size and especially in metamorphic conditions. While the Eclogite Zone is characterized by constant P-T conditions (600-650°C, 20-25 kbar), the Western Gneiss Region contains a wide P-T range from high- to ultrahigh pressure conditions (400-800°C, 20-35 kbar). In contrast to this, the omphacite textures of both units are very similar. This means that omphacite LPO is independent from P-T conditions and therefore from burial depth. Further, in both units, omphacite LPO is independent from grain and subgrain size as well as from any shape preferred orientation (SPO) on grain and subgrain scale. Overall, omphacite lattice preferred orientation are generated on the prograde part of omphacite development. Therefore, textural investigations on omphacite LPO are not applicable to study eclogite exhumation.

Sintesi, modifica e caratterizzazione di polimeri da fonti rinnovabili

Gli argomenti trattati all’interno di questa tesi di dottorato riguardano la sintesi e la modifica di polimeri ottenuti a partire da fonti rinnovabili. L’acido polilattico (PLA) è stato modificato per ottenere film estensibili per uso alimentare. La scelta del materiale si è basata sull’analisi del suo ciclo di vita e perché è riconosciuto come sicuro per l’utilizzo nel campo alimentare. Le formulazioni testate, a base di PLA, sono state preparate con l’aggiunta di una serie di additivi utilizzati per migliorare le proprietà meccaniche del materiale. La lavorazione è stata eseguita mediante estrusione, ottenendo dei pellet a composizione omogenea successivamente lavorati nell’estrusore a bolla, modalità industriale di produzione dei film estensibili. È stata poi effettuata la sintesi diretta di nuovi poliesteri insaturi a base di dimetil succinato e 1,6-esandiolo. L’insaturazione della catena è stata ottenuta mediante l’uso, durante la sintesi, di derivati dell’olio di ricino, l’acido ricinoleico e il suo derivato insaturo metil undecenoato. Un’altra molecola insatura utilizzata è stata il citronellolo, scelto tra i terpeni. I polimeri così ottenuti sono stati modificati tramite reazioni radicaliche indotte con radiazioni UV utilizzando sostanze antibatteriche (sale 3-esadecil-1-vinilimidazolo bromuro) al fine di ottenere materiali con attività biocida a lungo termine e senza rilascio. Si è proceduto inoltre alla polimerizzazione reversibile di monomeri furanici con oli vegetali utilizzando una strategia di tipo double click. Si è partiti dalla sintesi di monomeri derivanti da oli vegetali contenenti eterocicli furanici attaccati mediante addizione tiol-enica (prima reazione click chemistry) e si è proseguito con la loro successiva polimerizzazione attraverso una reazione di tipo Diels-Alder con molecole con gruppi maleimmidici (seconda reazione click chemistry). I polimeri così ottenuti sono materiali potenzialmente auto-riparanti, grazie alla possibilità di spostare l’equilibrio verso i prodotti o i reagenti semplicemente variando le condizioni di temperatura.

Caratterizzazione di profili estrusi in lega di magnesio ZM21 caricata con carburo di silicio

L’attività sperimentale presentata in questo elaborato è volta a conoscere le proprietà meccaniche di una lega di magnesio rinforzata con particelle ceramiche (Carburo di silicio SiC). Scopo del lavoro sarà pertanto il confronto fra le proprietà meccaniche del materiale base ZM21 rispetto al materiale prodotto in Israele con rinforzo di carburo di silicio, con particolare riferimento alle proprietà a trazione, a compressione e alla distribuzione di particelle nella matrice (analisi metallografica).

Sistemi per la produzione di enzimi industriali finalizzati alla valorizzazione di scarti agroalimentari

La demolizione idrolitica delle pareti cellulari delle piante tramite enzimi lignocellulosici è quindi uno degli approcci più studiati della valorizzazione di scarti agricoli per il recupero di fitochimici di valore come secondary chemical building block per la chimica industriale. White rot fungi come il Pleurotus ostreatus producono una vasta gamma di enzimi extracellulari che degradano substrati lignocellulosici complessi in sostanze solubili per essere utilizzati come nutrienti. In questo lavoro abbiamo studiato la produzione di diversi tipi di enzimi lignocellulosici quali cellulase, xilanase, pectinase, laccase, perossidase e arylesterase (caffeoilesterase e feruloilesterase), indotte dalla crescita di Pleurotus ostreatus in fermentazione allo stato solido (SSF) di sottoprodotti agroalimentari (graspi d’uva, vinaccioli, lolla di riso, paglia di grano e crusca di grano) come substrati. Negli ultimi anni, SSF ha ricevuto sempre più interesse da parte dei ricercatori, dal momento che diversi studi per produzioni di enzimi, aromi, coloranti e altre sostanze di interesse per l' industria alimentare hanno dimostrato che SSF può dare rendimenti più elevati o migliorare le caratteristiche del prodotto rispetto alla fermentazione sommersa. L’utilizzo dei sottoprodotti agroalimentari come substrati nei processi SSF, fornisce una via alternativa e di valore, alternativa a questi residui altrimenti sotto/o non utilizzati. L'efficienza del processo di fermentazione è stato ulteriormente studiato attraverso trattamenti meccanici di estrusione del substrato , in grado di promuovere il recupero dell’enzima e di aumentare l'attività prodotta. Le attività enzimatiche prodotte dalla fermentazione sono strettamente dipendente della rimozione periodica degli enzimi prodotti. Le diverse matrici vegetali utilizzate hanno presentato diversi fenomeni induttivi delle specifiche attività enzimatiche. I processi SSF hanno dimostrato una buona capacità di produrre enzimi extracellulari in grado di essere utilizzati successivamente nei processi idrolitici di bioraffinazione per la valorizzazione dei prodotti agroalimentari.

Safety by design: production of engineering surface modified nanomaterials

This PhD thesis focused on nanomaterial (NM) engineering for occupational health and safety, in the frame of the EU project “Safe Nano Worker Exposure Scenarios (SANOWORK)”. Following a safety by design approach, surface engineering (surface coating, purification process, colloidal force control, wet milling, film coating deposition and granulation) were proposed as risk remediation strategies (RRS) to decrease toxicity and emission potential of NMs within real processing lines. In the first case investigated, the PlasmaChem ZrO2 manufacturing, the colloidal force control applied to the washing of synthesis rector, allowed to reduce ZrO2 contamination in wastewater, performing an efficient recycling procedure of ZrO2 recovered. Furthermore, ZrO2 NM was investigated in the ceramic process owned by CNR-ISTEC and GEA-Niro; the spray drying and freeze drying techniques were employed decreasing NM emissivity, but maintaining a reactive surface in dried NM. Considering the handling operation of nanofibers (NFs) obtained through Elmarco electrospinning procedure, the film coating deposition was applied on polyamide non-woven to avoid free fiber release. For TiO2 NF the wet milling was applied to reduce and homogenize the aspect ratio, leading to a significant mitigation of fiber toxicity. In the Colorobbia spray coating line, Ag and TiO2 nanosols, employed to transfer respectively antibacterial or depolluting properties to different substrates, were investigated. Ag was subjected to surface coating and purification, decreasing NM toxicity. TiO2 was modified by surface coating, spray drying and blending with colloidal SiO2, improving its technological performance. In the extrusion of polymeric matrix charged with carbon nanotube (CNTs) owned by Leitat, the CNTs used as filler were granulated by spray drying and freeze spray drying techniques, allowing to reduce their exposure potential. Engineered NMs tested by biologists were further investigated in relevant biological conditions, to improve the knowledge of structure/toxicity mechanisms and obtain new insights for the design of safest NMs.

Freisetzung von frei zirkulierender DNA unter einer Fahrradergometrie bei Straßenradfahrern

Ziel dieser Studie war es zu untersuchen, ob die unter Belastung vorliegenden Anstiege plasmatischer zellfreier DNA über den Mechanismus der NETose zu erklären sind. Zudem sollte die Assoziation von zellfreier DNA und leistungsphysiologischen Parametern geklärt werden. Anhand eines Stufenprotokolls wurden Straßenradfahrer belastet und durch Blutuntersuchungen auf DNA, MPO, Elastase sowie Leistungsphysiologie untersucht. Anhand der Ergebnisse kann die Herkunft der DNA aus NETs nicht bewiesen werden. Die Neutrophilen Granulozyten zeigen eine Degranulationsreaktion, die aber nicht parallel mit den DNA-Anstiegen verläuft. Leitsungsphysiologisch war auffällig, dass die absolute Leistung mit der DNA korreliert sowie Parameter des Herzkreislaufsystems ebenfalls ähnliche ansteigen wie die DNA im Blut.

Effetto di differenti condizioni di formulazione, conservazione e somministrazione sulle caratteristiche reologiche di creme alimentari

Le proprietà reologiche degli alimenti cremosi a fini medici speciali, come quelli per l’alimentazione dei pazienti disfagici, sono influenzate dalla formulazione e dalle tecnologie di produzione. Gli obiettivi di questa tesi, sono stati i seguenti: - individuazione di metodi e parametri reologici empirico-imitativi per la caratterizzazione di campioni di creme alimentari; - studio dell’effetto di differenti quantità di addensante sulle caratteristiche reologiche di creme alimentari; - studio dell’effetto della conservazione in regime di refrigerazione (4° C) o surgelazione (-18°C) sulle caratteristiche reologiche di differenti creme alimentari. Questo al fine di approfondire la conoscenza di tali aspetti per ottimizzare le modalità di produzione e conservazione di differenti creme alimentari destinate all’alimentazione di pazienti disfagici. Dai risultati ottenuti è emerso come tra i metodi ed i parametri empirico-imitativi considerati, quello che sembra essere risultato più idoneo per la determinazione rapida delle caratteristiche di viscosità dei campioni di creme alimentari analizzati è risultato il parametro coesività valutato con test di back extrusion. Per la natura pseudo-plastica dei campioni analizzati, contrariamente a quanto indicato dal produttore, l’utilizzo del viscosimetro vibrazionale non è risultato essere ottimale, per l’instabilità della misura legata alla modifica più o meno importante della viscosità dei sistemi analizzati causata dall’azione delle onde sonore generate dal probe. La caratterizzazione reologica delle creme con differenti contenuti di addensante ha permesso di creare delle cinetiche legate alla modifica delle caratteristiche reologiche empirico-imitative dei sistemi in funzione della quantità di addensate aggiunto. Correlando tali informazioni con il livello di accettazione dei prodotti da parte del paziente disfagico sarà possibile creare degli standard produttivi reologici per la preparazione di prodotti idonei alla sua alimentazione. Le differenti temperature di conservazione dei prodotti, in regime di refrigerazione o congelamento, sembrano non aver influenzato le caratteristiche reologiche delle creme analizzate.

Response of gram-positive bacteria to copper stress

The Gram-positive bacteria Enterococcus hirae, Lactococcus lactis, and Bacillus subtilis have received wide attention in the study of copper homeostasis. Consequently, copper extrusion by ATPases, gene regulation by copper, and intracellular copper chaperoning are understood in some detail. This has provided profound insight into basic principles of how organisms handle copper. It also emerged that many bacterial species may not require copper for life, making copper homeostatic systems pure defense mechanisms. Structural work on copper homeostatic proteins has given insight into copper coordination and bonding and has started to give molecular insight into copper handling in biological systems. Finally, recent biochemical work has shed new light on the mechanism of copper toxicity, which may not primarily be mediated by reactive oxygen radicals.