Productivity of cherry tomatoes under protected cultivation carried out with different types of pruning and spacing

The aim of the study was to evaluate production and determine the level of total soluble solids for cherry tomatoes, under protected cultivation carried out with different types of spacing and pruning. The experiment was performed according to a randomized block design in a 2×2 factorial scheme, with two types of spacing between plants and two types of pruning, and with five repetitions. The cultivar 'Sindy' (De Ruiter) was utilized. Each experimental parcel contained seven plants, and fruits were collected from the five central plants. The seedlings were produced in Styrofoam trays of 128 cells and transplanted at 33 days after planting using two types of spacing between plants (0.3 and 0.5 m) and 1 m spacing between rows. The plants were grown as single-or double-stem form and staked individually. The parameters evaluated were the number of fruit per plant, fresh weight of fruit and the level of total soluble solids expressed in °Brix. There was no evidence of significant interaction between the treatments. For fresh weight of fruit per plant, there was a significant effect when the plants were grown with a spacing of 1 × 0.5 m, with 4.12 kg per plant, compared to a production of 3.00 kg per plant with a spacing of 1 × 0.3 m. With regard to the number of fruit per plant, a significant difference was seen between the two types of spacing, where a spacing of 1 × 0.3 m yielded a lower number of fruit per plant (188.8), compared to that observed with a spacing of 1 × 0.5 m (238.1). With regard to the two types of pruning, there was a significant effect for only the number of fruit per plant, where the mean number of fruit was 188.4 with one stem and 238.4 with two stems. No significant difference was observed between the treatments for the level of total soluble solids. It is concluded that for the cultivar 'Sindy', under protected cultivation, production is better with a spacing of 0.5 m between plants and the use of two stems per plant.

Comparative studies of the sample decomposition of green and roasted coffee for determination of nutrients and data exploratory analysis

The contents of some nutrients in 35 Brazilian green and roasted coffee samples were determined by flame atomic absorption spectrometry (Ca, Mg, Fe, Cu, Mn, and Zn), flame atomic emission photometry (Na and K) and Kjeldahl (N) after preparing the samples by wet digestion procedures using i) a digester heating block and ii) a conventional microwave oven system with pressure and temperature control. The accuracy of the procedures was checked using three standard reference materials (National Institute of Standards and Technology, SRM 1573a Tomato Leaves, SRM 1547 Peach Leaves, SRM 1570a Trace Elements in Spinach). Analysis of data after application of t-test showed that results obtained by microwave-assisted digestion were more accurate than those obtained by block digester at 95% confidence level. Additionally to better accuracy, other favorable characteristics found were lower analytical blanks, lower reagent consumption, and shorter digestion time. Exploratory analysis of results using Principal Component Analysis (PCA) and Hierarchical Cluster Analysis (HCA) showed that Na, K, Ca, Cu, Mg, and Fe were the principal elements to discriminate between green and roasted coffee samples. ©2007 Sociedade Brasileira de Química.

Enxertia e água de irrigação carbonatada no transporte de 15N e na produção do tomateiro

The effects of CO2 application through irrigation water, and of grafting in transport of 15N and in the tomato production, were studied. These treatments were arranged in a 2 x 2 factorial scheme (with and without CO2 in irrigation water and grafted and non-grafted tomato), in a completely randomized design, with four replications. The injection of CO2 into the water began at 34 days after transplant of seedlings (DAT) and continued for all irrigations. The application of the sulfate of ammonium with abundance in atoms of 15N of 3.13% in plants destined to analysis was done at 45 DAT when the plants were in the middle of fructification. After 14 days of fertilizer (15N) application the plants were harvested, washed, dried and sent for analysis of 15N in plant tissue. The results demonstrated that CO2 and the grafting did not alter the transport of 15N in the plant. The production of commercial fruits was larger when CO2 was applied in water.

Carotenoid composition of Brazilian fruits and vegetables

Brazil has a wide diversity of food sources of carotenoids. The updated Brazilian database consists of more than 270 items of fruits, vegetables and their prepared and processed products. The database demonstrates variations due to variety, maturity, production technique, climate and processing. Many of these foods are not found in the US and European databases. Good to rich sources (>20 μg/g) of β-carotene are: acerola, bocaiúva, mango 'Extreme' and tucumã. Sources of both α-carotene and β-carotene are buriti, carrot, Cucurbita moschata 'Menina Brasileira', 'Baianinha' and 'Goianinha', and red palm oil. Commercially produced and uncultivated or semi-cultivated leafy vegetables, C. maxima 'Jerimum Caboclo' and the hybrid Tetsukabuto, cooked broccoli are sources of lutein and β-carotene. The edible Tropaeolum majus flower is especially rich in lutein. Although many fruits have β-cryptoxanthin as principal carotenoid (e.g. caja, nectarine, peach, orange-fleshed papaya, tree tomato), the levels are below 20 μg/g. Good to rich sources of lycopene are guava and guava products, papaya, pitanga and pitanga juice, tomato and tomato products, and watermelon. Sources of zeaxanthin are rare; although the principal carotenoid of piqui, the amount is low, lower than that found in buriti.

High temperature tolerance of determinate tomatoes in Brazil

The experiment was conducted in the experimental area belonging to the Section of Crop Production and Aromatic Medicinal Plants of the FCAV-UNESP, Jaboticabal Campus - Sao Paulo, Brazil. Tolerance to high temperature was studied in six determinate genotypes of tomato (Lycopersicon esculentum L.): Agrocica 8, Apex 1000, Botu-13, Calmech VFAS, Nemadoro and Jab-2, which were cultivated in a greenhouse at temperatures above 33oC for at least 2 h/day during blooming. The objectives of the study were to identify the genetic diversity of the genotypes studied and to determine their performance associated with tolerance to high temperature. Dissimilarity was determined by the generalized Mahalanobis distance. Delineation groups were optimized with the Tocher technique. A random block design was utilized with six treatments and with three replications. Two similarity groups were identified: 1 - Apex 1000, Botu-13, Calmech VFAS, Jab-2, Nemadoro and 2 - Agrocica 8. Crossing of genotypes within one group has no advantage because little genetic divergence and no heterotic response would be expected. However, the crossing of genotypes between groups is suggested. Knowledge of these groups will be important for efficiency future breeding efforts.

High temperature tolerance of indeterminate tomatoes in Brazil

The study was conducted at the Section of Crop Production and Aromatic Medicinal Plants of FCAV-UNESP, Jaboticabal Campus - Sao Paulo, Brazil. Nine indeterminate tomato (Lycopersicon esculentum Mill.) genotypes, Jumbo, Santa Clara, Cláudia VF, Concorde, Débora Plus, FM-9, Carmen, Príncipe Gigante, and CL 5915, were evaluated for high temperature tolerance. Three determinate tomato genotypes, FM-9, Suncoast and TSW-10, were cultivated in a greenhouse at more than 33°C air temperature for at least 2 h/day during bloom. The objective was to identify variable genotypes to determine their tolerance of high temperature. Four replications of fifteen treatments were planted in a randomized block design. Dissimilarity was determined by the generalized Mahalanobis distance. Delineation groups were optimized with the Tocher technique. The tomatoes were classified into six groups of similar temperature responses. CL 5915 was the most tolerant of high temperatures. Crossing of genotypes within one group has no advantage because little genetic divergence and no heterotic response would be expected. However, the crossing of genotypes between groups is suggested. Knowledge of these groups will be important for efficient future breeding efforts.

Heavy metals availability and fractions in soil amended with biosolid composts

The heavy metals when linked to organic matter have a behavior in the soil that is still little known. This study aimed to evaluate the effect of sewage-sludge-based composts when incorporated in the soil, in relation to heavy metals availability. Five composts were incorporated using sugar-cane bagasse, sewage sludge and cattle manure in the respective proportions: 75-0-25, 75-12.5-12.5, 75-25-0, 50-50-0 and 0-100-0 (composts with 0, 12.5, 25, 50 and 100% sewage sludge). The experiment consisted of 6 treatments (5 composts and a control with mineral fertilization) in randomized blocks with a split-plot design. The control and the treatment of 0% sewage sludge received inorganic nitrogen (N). All the treatments received the same amount of N (8.33 g) K (5.80 g) and K (8.11 g) per pot. Tomato plants were cultivated in 24.0 L pots in a greenhouse in Jaboticabal, SP, Brazil. The concentrations of heavy metals were determined in the soil samples at day 0 after compost incorporation. The higher the sewage sludge doses, the higher heavy metal contents in the soil. Among extractants, Melhlich-1 extracted the highest amount of heavy metals, while DTPA extracted the lowest one. The residual fraction presented the highest heavy metal content, followed by Fe oxides crystalline and amorphous to Cu, Cr and Mn, and Mn oxides, and Fe amorphous to Zn, indicating strong associations to oxides and clays. There were significant positive correlations between Mn contents in the plant and Mn linked to Fe oxide amorphous and crystalline.

Mutagenic activity of glycoallkaloids from Solanum palinacanthum dunal (Solanaceae) found in the Brazilian cerrado

Solanaceous plants are widely distributed around the world and they are traditionally used as drugs for the treatment of cancer and herpes, and include familiar foods such as potato, tomato and eggplant and some berries popular in Brazil. As part of a program of research on pharmacologically active new molecules, the aim in this study was to assess the mutagenic effects of Solanum palinacanthum, known popularly as joá. The crude 95% ethanol extract and purified solamargine obtained from the fruits of S. palinacanthum Dunal were investigated by the Ames test, using the Salmonella typhimurium strains TA98, TA97a, TA100 and TA102 as test organisms, with and without metabolic activation. The concentrations tested ranged from 0.07 to 15.0 mg/plate for the crude ethanolic extract and from 1.25 to 5.0 mg/plate for the solamargine. The results showed a mutagenic effect of both the extract and the solamargine in the TA98 strain (without metabolic activation). The present study showed the potential mutagenicity and suggests confirming this effect in other models, before recommending their indiscriminate consumption by the population.

Efeito de produtos químicos sobre a mancha bacteriana (xanthomonas perforans) e na ativação de proteínas relacionadas à patogênese em tomateiro

The present study aims to evaluate the effect of fungicides and antibiotics to control bacterial spot (Xanthomonas perforans) in tomato, and the activation of pathogenesis-related proteins. Hybrid tomato AP 529 was used to assess the severity of disease. The treatments consisted of spraying with acibenzolar-S-methyl, fluazinam, pyraclostrobin, pyraclostrobin + methiran, copper oxychloride, copper oxychloride and mancozeb + oxytetracycline, and inoculated and non-inoculated controls. After three days of treatment, all plants were inoculated with X. perforans (10 6 CFU / mL). Leaf discs were collected for assessment of peroxidase, polyphenol oxidase, β-1,3 glucanase, phenylalanine ammonia lyase and protease. The area under the disease progress curve (AUDPC) was calculated with the data of severity. All treatments had reduced AUDPC compared to the inoculated control. Fungicides acibenzolar-S-methyl, pyraclostrobin, and pyraclostrobin + methiran had more satisfactory results in reducing the severity of bacterial spot on tomato. The products based on pyraclostrobin together with acibenzolar-S-methyl induced enzymatic activities of peroxidase, polyphenoloxidase and β-1,3 glucanase, indicating that these products may be related to the induction of resistance to bacterial spot on tomato plants.

Manejo da Irrigação Para Otimização da Produtividade E Qualidade de Frutos de Tomateiro em Sistema de Plantio Direto

There is much information on the adequate soil water matrix potential for returning irrigation in conventional soil tillage systems; however there is not enough information on the best soil water matrix potential for no-tillage production systems. This work aimed to study the effect of five irrigation levels on yield, soluble solids, and fruit acidity of the Hypeel tomato, cultivated for industrial processing and cropped on no-tillage system in Yellow Latosol. The experiment was carried out on a randomized block design with five treatments and four replications. The treatments consisted in different soil water matrix potentials for returning irrigation (m at 13cm of soil depth): -15, -30, -45, -60 and -75 kPa. The results obtained showed that the soil water matrix potential of -28.5 kPa resulted in maximum yields for tomato crop; whereas the value of -50.8 kPa resulted in the maximum fruit soluble solids concentration.

Estratégias para produção de mudas de tomateiro utilizando paclobutrazol

The modern tomato production, either for fruit table production or for processing, has required quality seedlings, able to withstand environmental adversities after planting and maintaining the standard genotype productive. The aim of this study was to evaluate the effect of three concentrations of PBZ (0, 50 and 100 mg L-1) and two methods of application (seed treatment and watering seedlings) on seedling emergence and seedling production of tomato growth indeterminate. We adopted a completely randomized in a 2x3 factorial scheme with four replications. We evaluated the seedling emergence, the rate of speed of emergence, seedling height and diameter of hypocotyl and their absolute growth rate (TCA), leaf area, dry weight of shoots, roots and total, and reason leaf area (RAF). Results were subjected to analysis of variance and the mean levels of the factor methods of application compared by Tukey test at 5% and the mean levels of the factor concentrations subjected to regression analysis. The application of paclobutrazol via seedlings watering did not affect seedling emergence, significantly reduced the rate of seedling growth and, consequently, the size of the seedlings without affecting the diameter of hypocotyl, plus allow accumulation of dry roots. A concentration of 50 mg L-1 was shown to be sufficient to obtain seedlings more compact, subject to leaf area, the application via watering, beyond allowing an increase of about 37% in dry weight of roots.

Índice de área foliar e produtividade do tomate sob condições de ambiente protegido

The tomato cultivation in the greenhouse has been expanded in the last years, mainly, in the South and Southeast regions of Brazil, whose purpose is to improve the productivity and the quality of the agricultural products, offering regularity in the production. The present study aimed to determine, along the crop cycle, the relationship between the leaf area index and the productivity, and at the end of the cycle, the components of production of the tomato in the greenhouse. The models were generated through polynomial equations of 1st and 2nd order, having as independent variable the number of days after the transplanting. It was verified that it is possible to determine, in the greenhouse, through mathematical models, the leaf area index of the tomato crop considering the days after the transplanting. Basing on values of leaf area index, the productivity of the crop and the period of the maximum productivity can be determined, aiding the farmers to determine the best sowing and transplanting time of the tomato crop.

Pulp fruit added to culture medium for in vitro orchid development

As an additive in in vitro culture media, fruits have a great potential for facilitating economical orchid production because of lower technology requirements and the ease of obtaining raw materials to formulate culture media. We studied the in vitro growth of Cattleya bicolor Lindl. grown in a simplified culture medium supplemented with different kinds of fruit pulp. The experimental design was completely randomised, with eight seedlings per replication and ten replications per treatment, for a total of 80 seedlings per treatment. The culture medium was made using 150 g L -1 of pulp (without peel or seed) from the following fruits: ripe Santa Cruz tomatoes (Solanum lycopersicum L.), dwarf bananas (Musa cavendishii L.) of intermediate ripeness, light green chayote (Sechium edule (Jacq.) Sw), ripe papaya (Carica papaya L.) or green coconut (Cocos nucifera L.).The treatment control was MS 50 %. The treatments and the control were kept in a growth chamber for seven months before evaluating seedling survival percentage, shoot height, number of leaves, rooting percentage, root number, root length and dry masses of shoot and roots. The highest percentages of seedling survival were obtained using MS 50 %, banana and coconut medium. The seedling survival and rooting percentages illustrate that it is possible to emphasise the culture medium MS 50% and the culture medium supplemented with coconut on the most traditional culture medium with banana or tomato pulp. For the in vitro development of Cattleya bicolor Lindl., a simplified culture medium supplemented with coconut pulp is the most suitable for use as an alternative to MS 50%. A simplified culture medium supplemented with papaya pulp is not recommended for the in vitro development of Cattleya bicolor Lindl.

Atividade inseticida e Modos de Ação de Extratos Vegetais Sobre Mosca Branca (Bemisia tabaci)

Insecticide potential and efficaciousness of vegetal extracts concentrations from six botanic families in three different modes were analyzed on the nymphs of the silverleaf whitefly Bemisia tabaci (Genn. 1889) on a tomato plantation Lycopersicon esculentum Mill. Nymph breeding was kept in cherry tomato shrubs. Test solutions were obtained from successive extractions with ethanol and evaporation in a rotary evaporator. Tests consisted of 10 solutions in four concentrations (500; 1,000; 1,500 and 3,000 μg/mL) and control treatment (distilled water + 1% DMSO) under three different modes of activity, namely, contact, translaminar and systemic. Experimental design was totally randomized with four repetitions and eleven treatments. Means were compared by Scott-Knott test at 5% probability and lethal concentrations (CL50) were calculated by POLO. In the case of contact activity mode, all extracts had efficiency above 50% with the highest concentration (3,000 μg/mL) in which the highest efficiency for all extracts tested was verified. There was a need for dose increase in translaminar activity mode for similar results, whereas in the case of systemic activity the best performance was obtained with extracts of Nerium oleander, Derris amazonica and Ipomoea carnea. Extracts of the last two caused a higher percentage when compared with that of other extracts in all activity modes lower than CL50.

Fusarium solani f. sp. passiflorae: A new forma specialis causing collar rot in yellow passion fruit

The aim of this study was to characterize a Fusarium population obtained from yellow passion fruit (YPF) with collar rot using pathogenicity, morphocultural characteristics and molecular tests. Pathogenicity and disease severity were assessed in six plant species: YPF, zucchini, tomato, bean, soya bean and cucumber. Potato dextrose agar medium (PDA) was used to determine mycelial growth at five temperatures (15-35°C). The colour produced by isolates was also determined on PDA at 25°C. Synthetic nutrient agar medium was used to evaluate: (i) type of mycelium and phialides; (ii) size, shape and number of septa from conidia; and (iii) production of chlamydospores and perithecia. Molecular tests consisted of sequencing the ITS-5·8S rDNA region and elongation factor 1α (EF-1α) gene. The isolates caused large lesions on YPF, zucchini and tomato, with YPF having the highest mean disease severity and being the only one that showed wilt symptoms and death of the plant. Thus the isolates showed host specificity. Maximum mycelial growth occurred at 25°C and the predominant colour was bluish-white. The isolates produced long phialides, dense aerial mycelium, oval microconidia with a mean size of 9·5 × 2·6 μm, macroconidia of 32·7 × 3·4 μm with 3·3 septa, and chlamydospores; only one isolate lacked perithecia. Phylogenetic trees of the ITS region and EF-1α gene showed that isolates from YPF formed a distinct group within the F. solani group and the formae speciales of F. solani. It is proposed to name all isolates from YPF as F. solani f. sp. passiflorae. © 2013 British Society for Plant Pathology.