Visual scanning in sports actions: comparison between soccer goalkeepers and judo fighters

Visual search and oculomotor behaviour are believed to be very relevant for athlete performance, especially for sports requiring refined visuo-motor coordination skills. Modern coaches believe that a correct visuo-motor strategy may be part of advanced training programs. In this thesis two experiments are reported in which gaze behaviour of expert and novice athletes were investigated while they were doing a real sport specific task. The experiments concern two different sports: judo and soccer. In each experiment, number of fixations, fixation locations and mean fixation duration (ms) were considered. An observational analysis was done at the end of the paper to see perceptual differences between near and far space. Purpose: The aim of the judo study was to delineate differences in gaze behaviour characteristics between a population of athletes and one of non athletes. Aspects specifically investigated were: search rate, search order and viewing time across different conditions in a real-world task. The second study was aimed at identifying gaze behaviour in varsity soccer goalkeepers while facing a penalty kick executed with instep and inside foot. Then an attempt has been done to compare the gaze strategies of expert judoka and soccer goalkeepers in order to delineate possible differences related to the different conditions of reacting to events occurring in near (peripersonal) or far (extrapersonal) space. Judo Methods: A sample of 9 judoka (black belt) and 11 near judoka (white belt) were studied. Eye movements were recorded at 500Hz using a video based eye tracker (EyeLink II). Each subject participated in 40 sessions for about 40 minutes. Gaze behaviour was considered as average number of locations fixated per trial, the average number of fixations per trial, and mean fixation duration. Soccer Methods: Seven (n = 7) intermediate level male volunteered for the experiment. The kickers and goalkeepers, had at least varsity level soccer experience. The vision-in-action (VIA) system (Vickers 1996; Vickers 2007) was used to collect the coupled gaze and motor behaviours of the goalkeepers. This system integrated input from a mobile eye tracking system (Applied Sciences Laboratories) with an external video of the goalkeeper’s saving actions. The goalkeepers took 30 penalty kicks on a synthetic pitch in accordance with FIFA (2008) laws. Judo Results: Results indicate that experts group differed significantly from near expert for fixations duration, and number of fixations per trial. The expert judokas used a less exhaustive search strategy involving fewer fixations of longer duration than their novice counterparts and focused on central regions of the body. The results showed that in defence and attack situation expert group did a greater number of transitions with respect to their novice counterpart. Soccer Results: We found significant main effect for the number of locations fixated across outcome (goal/save) but not for foot contact (instep/inside). Participants spent more time fixating the areas in instep than inside kick and in goal than in save situation. Mean and standard error in search strategy as a result of foot contact and outcome indicate that the most gaze behaviour start and finish on ball interest areas. Conclusions: Expert goalkeepers tend to spend more time in inside-save than instep-save penalty, differences that was opposite in scored penalty kick. Judo results show that differences in visual behaviour related to the level of expertise appear mainly when the test presentation is continuous, last for a relatively long period of time and present a high level of uncertainty with regard to the chronology and the nature of events. Expert judoist performers “anchor” the fovea on central regions of the scene (lapel and face) while using peripheral vision to monitor opponents’ limb movements. The differences between judo and soccer gaze strategies are discussed on the light of physiological and neuropsychological differences between near and far space perception.

Dynamic identification of structures: experimental assessment of modal parameteres through methods in frequency domain, in time-frequency domain and model updating

Among the experimental methods commonly used to define the behaviour of a full scale system, dynamic tests are the most complete and efficient procedures. A dynamic test is an experimental process, which would define a set of characteristic parameters of the dynamic behaviour of the system, such as natural frequencies of the structure, mode shapes and the corresponding modal damping values associated. An assessment of these modal characteristics can be used both to verify the theoretical assumptions of the project, to monitor the performance of the structural system during its operational use. The thesis is structured in the following chapters: The first introductive chapter recalls some basic notions of dynamics of structure, focusing the discussion on the problem of systems with multiply degrees of freedom (MDOF), which can represent a generic real system under study, when it is excited with harmonic force or in free vibration. The second chapter is entirely centred on to the problem of dynamic identification process of a structure, if it is subjected to an experimental test in forced vibrations. It first describes the construction of FRF through classical FFT of the recorded signal. A different method, also in the frequency domain, is subsequently introduced; it allows accurately to compute the FRF using the geometric characteristics of the ellipse that represents the direct input-output comparison. The two methods are compared and then the attention is focused on some advantages of the proposed methodology. The third chapter focuses on the study of real structures when they are subjected to experimental test, where the force is not known, like in an ambient or impact test. In this analysis we decided to use the CWT, which allows a simultaneous investigation in the time and frequency domain of a generic signal x(t). The CWT is first introduced to process free oscillations, with excellent results both in terms of frequencies, dampings and vibration modes. The application in the case of ambient vibrations defines accurate modal parameters of the system, although on the damping some important observations should be made. The fourth chapter is still on the problem of post processing data acquired after a vibration test, but this time through the application of discrete wavelet transform (DWT). In the first part the results obtained by the DWT are compared with those obtained by the application of CWT. Particular attention is given to the use of DWT as a tool for filtering the recorded signal, in fact in case of ambient vibrations the signals are often affected by the presence of a significant level of noise. The fifth chapter focuses on another important aspect of the identification process: the model updating. In this chapter, starting from the modal parameters obtained from some environmental vibration tests, performed by the University of Porto in 2008 and the University of Sheffild on the Humber Bridge in England, a FE model of the bridge is defined, in order to define what type of model is able to capture more accurately the real dynamic behaviour of the bridge. The sixth chapter outlines the necessary conclusions of the presented research. They concern the application of a method in the frequency domain in order to evaluate the modal parameters of a structure and its advantages, the advantages in applying a procedure based on the use of wavelet transforms in the process of identification in tests with unknown input and finally the problem of 3D modeling of systems with many degrees of freedom and with different types of uncertainty.

UWB radar sensor networks: Detection algorithms design and experimental analysis

In the last years radar sensor networks for localization and tracking in indoor environment have generated more and more interest, especially for anti-intrusion security systems. These networks often use Ultra Wide Band (UWB) technology, which consists in sending very short (few nanoseconds) impulse signals. This approach guarantees high resolution and accuracy and also other advantages such as low price, low power consumption and narrow-band interference (jamming) robustness. In this thesis the overall data processing (done in MATLAB environment) is discussed, starting from experimental measures from sensor devices, ending with the 2D visualization of targets movements over time and focusing mainly on detection and localization algorithms. Moreover, two different scenarios and both single and multiple target tracking are analyzed.

Time-referenced effects of an internal vs. external focus of attention on muscular activity and compensatory variability

The paralysis-by-analysis phenomenon, i.e., attending to the execution of one's movement impairs performance, has gathered a lot of attention over recent years (see Wulf, 2007, for a review). Explanations of this phenomenon, e.g., the hypotheses of constrained action (Wulf et al., 2001) or of step-by-step execution (Masters, 1992; Beilock et al., 2002), however, do not refer to the level of underlying mechanisms on the level of sensorimotor control. For this purpose, a “nodal-point hypothesis” is presented here with the core assumption that skilled motor behavior is internally based on sensorimotor chains of nodal points, that attending to intermediate nodal points leads to a muscular re-freezing of the motor system at exactly and exclusively these points in time, and that this re-freezing is accompanied by the disruption of compensatory processes, resulting in an overall decrease of motor performance. Two experiments, on lever sequencing and basketball free throws, respectively, are reported that successfully tested these time-referenced predictions, i.e., showing that muscular activity is selectively increased and compensatory variability selectively decreased at movement-related nodal points if these points are in the focus of attention.

The time window for generation of dendritic spikes by coincidence of action potentials and EPSPs is layer specific in somatosensory cortex

The precise timing of events in the brain has consequences for intracellular processes, synaptic plasticity, integration and network behaviour. Pyramidal neurons, the most widespread excitatory neuron of the neocortex have multiple spike initiation zones, which interact via dendritic and somatic spikes actively propagating in all directions within the dendritic tree. For these neurons, therefore, both the location and timing of synaptic inputs are critical. The time window for which the backpropagating action potential can influence dendritic spike generation has been extensively studied in layer 5 neocortical pyramidal neurons of rat somatosensory cortex. Here, we re-examine this coincidence detection window for pyramidal cell types across the rat somatosensory cortex in layers 2/3, 5 and 6. We find that the time-window for optimal interaction is widest and shifted in layer 5 pyramidal neurons relative to cells in layers 6 and 2/3. Inputs arriving at the same time and locations will therefore differentially affect spike-timing dependent processes in the different classes of pyramidal neurons.

High-field 1H T1 and T2 NMR Relaxation Time Measurements of H2O in Homeopathic Preparations of Quartz, Sulfur and Copper Sulfate

Quantitative meta-analyses of randomized clinical trials investigating the specific therapeutic efficacy of homeopathic remedies yielded statistically significant differences compared to placebo. Since the remedies used contained mostly only very low concentrations of pharmacologically active compounds, these effects cannot be accounted for within the framework of current pharmacology. Theories to explain clinical effects of homeopathic remedies are partially based upon changes in diluent structure. To investigate the latter, we measured for the first time high-field (600/500 MHz) 1H T1 and T2 nuclear magnetic resonance relaxation times of H2O in homeopathic preparations with concurrent contamination control by inductively coupled plasma mass spectrometry (ICP-MS). Homeopathic preparations of quartz (10c–30c, n = 21, corresponding to iterative dilutions of 100−10–100−30), sulfur (13x–30x, n = 18, 10−13–10−30), and copper sulfate (11c–30c, n = 20, 100−11–100−30) were compared to n = 10 independent controls each (analogously agitated dilution medium) in randomized and blinded experiments. In none of the samples, the concentration of any element analyzed by ICP-MS exceeded 10 ppb. In the first measurement series (600 MHz), there was a significant increase in T1 for all samples as a function of time, and there were no significant differences between homeopathic potencies and controls. In the second measurement series (500 MHz) 1 year after preparation, we observed statistically significant increased T1 relaxation times for homeopathic sulfur preparations compared to controls. Fifteen out of 18 correlations between sample triplicates were higher for controls than for homeopathic preparations. No conclusive explanation for these phenomena can be given at present. Possible hypotheses involve differential leaching from the measurement vessel walls or a change in water molecule dynamics, i.e., in rotational correlation time and/or diffusion. Homeopathic preparations thus may exhibit specific physicochemical properties that need to be determined in detail in future investigations.

Restrictive deferred hydration combined with preemptive norepinephrine infusion during radical cystectomy reduces postoperative complications and hospitalization time: a randomized clinical trial.

BACKGROUND Anesthetics and neuraxial anesthesia commonly result in vasodilation/hypotension. Norepinephrine counteracts this effect and thus allows for decreased intraoperative hydration. The authors investigated whether this approach could result in reduced postoperative complication rate. METHODS In this single-center, double-blind, randomized, superiority trial, 166 patients undergoing radical cystectomy and urinary diversion were equally allocated to receive 1 ml·kg·h of balanced Ringer's solution until the end of cystectomy and then 3 ml·kg·h until the end of surgery combined with preemptive norepinephrine infusion at an initial rate of 2 µg·kg·h (low-volume group; n = 83) or 6 ml·kg·h of balanced Ringer's solution throughout surgery (control group; n = 83). Primary outcome was the in-hospital complication rate. Secondary outcomes were hospitalization time, and 90-day mortality. RESULTS In-hospital complications occurred in 43 of 83 patients (52%) in the low-volume group and in 61 of 83 (73%) in the control group (relative risk, 0.70; 95% CI, 0.55-0.88; P = 0.006). The rates of gastrointestinal and cardiac complications were lower in the low-volume group than in the control group (5 [6%] vs. 31 [37%]; relative risk, 0.16; 95% CI, 0.07-0.39; P < 0.0001 and 17 [20%] vs. 39 [48%], relative risk, 0.43; 95% CI, 0.26-0.60; P = 0.0003, respectively). The median hospitalization time was 15 days [range, 11, 27d] in the low-volume group and 17 days [11, 95d] in the control group (P = 0.02). The 90-day mortality was 0% in the low-volume group and 4.8% in the control group (P = 0.12). CONCLUSION A restrictive-deferred hydration combined with preemptive norepinephrine infusion during radical cystectomy and urinary diversion significantly reduced the postoperative complication rate and hospitalization time.

Subjective pubertal timing and health compromising behaviors among on- time Swiss adolescent girls

AIM: The aim of this research is to assess the associations between subjective pubertal timing (SPT) and onset of health-compromising behaviours among girls reporting an on-time objective pubertal timing (OPT). METHODS: Data were drawn from the Swiss SMASH 2002 survey, a self-administered questionnaire study conducted among a nationally representative sample of 7548 adolescents aged 16-20 years. From the 3658 girls in the initial sample, we selected only those (n = 1003) who provided information about SPT and who reported the average age at menarche, namely 13, considering this as an on-time OPT. Bivariate and logistic analyses were conducted to compare the early, on-time and late SPT groups in terms of onset of health-compromising behaviours. RESULTS: A perception of pubertal precocity was associated with sexual intercourse before age 16 [adjusted odds ratio (AOR): 2.10 (1.30-3.37)] and early use of illegal drugs other than cannabis [AOR: 2.55 (1.30-5.02)]. Conversely, girls perceiving their puberty as late were less likely to report intercourse before age 16 [AOR: 0.30 (0.12-0.75)]. CONCLUSION: Faced with an adolescent girl perceiving her puberty as early, the practitioner should investigate the existence of health-compromising behaviours even if her puberty is or was objectively on-time.

Mobilities and Pottery Production Archaeological and Anthropological Perspectives

Our workshop aims at a deeper understanding of various itineraries of pottery and dif-ferent forms of human mobilities in which pottery is relevant, bringing together archae-ological and anthropological perspectives. For thousands of years, pottery has been an important part of many societies’ material culture and therefore a major research topic in both disciplines. In past and present societies the material existence of ceramic vessels is informed by various movements across time and space but also by periods of stasis: from the mo-ment of their production until their exclusion from daily practices, either disposed as waste, excluded as funerary objects or stored as collectibles. In their seemingly endless material durability, ceramic vessels might outlive their human producers, distributors or consumers and travel farther and longer. Still they are embedded in the regimes of human mobility, ranging from daily subsistence-based mobility to long-term migrations. In such processes, pottery shifts between spatial, temporal, social, economic and cultural contexts. Thereby ceramic vessels are appropriated and integrated in new contexts of action and meaning, sometimes leading to material transformations. This workshop takes place in the context of our archaeological research project „Mobili-ties, Entanglements and Transformations in Neolithic Societies on the Swiss Plateau (3900-3500 BC)“ to which our PhDs are connected. We address the above outlined topic by analysing the production of pottery. Based on dendrochronologically dated settle-ments between 3900 and 3500 BC, two regional pottery styles and their local variations are well known, Pfyn and Cortaillod. The vessels share the same habitus and were made of clays and temper deriving from the settlements’ surroundings. However, some vessels specific to other pottery styles are also present on the sites. They are characteristic for pottery styles known from more or less far off regions (Michelsberg, Munzingen or Néo-lithique Moyen Bourguignon). Some of them were travelling objects, as their non local raw materials show. Others seem to have been produced locally, pointing to long-term mobility and a change of residence from neighbouring social groups.

Time-Efficiency Analysis Comparing Digital and Conventional Workflows for Implant Crowns: A Prospective Clinical Crossover Trial

PURPOSE To compare time-efficiency in the production of implant crowns using a digital workflow versus the conventional pathway. MATERIALS AND METHODS This prospective clinical study used a crossover design that included 20 study participants receiving single-tooth replacements in posterior sites. Each patient received a customized titanium abutment plus a computer-aided design/computer-assisted manufacture (CAD/CAM) zirconia suprastructure (for those in the test group, using digital workflow) and a standardized titanium abutment plus a porcelain-fused-to-metal crown (for those in the control group, using a conventional pathway). The start of the implant prosthetic treatment was established as the baseline. Time-efficiency analysis was defined as the primary outcome, and was measured for every single clinical and laboratory work step in minutes. Statistical analysis was calculated with the Wilcoxon rank sum test. RESULTS All crowns could be provided within two clinical appointments, independent of the manufacturing process. The mean total production time, as the sum of clinical plus laboratory work steps, was significantly different. The mean ± standard deviation (SD) time was 185.4 ± 17.9 minutes for the digital workflow process and 223.0 ± 26.2 minutes for the conventional pathway (P = .0001). Therefore, digital processing for overall treatment was 16% faster. Detailed analysis for the clinical treatment revealed a significantly reduced mean ± SD chair time of 27.3 ± 3.4 minutes for the test group compared with 33.2 ± 4.9 minutes for the control group (P = .0001). Similar results were found for the mean laboratory work time, with a significant decrease of 158.1 ± 17.2 minutes for the test group vs 189.8 ± 25.3 minutes for the control group (P = .0001). CONCLUSION Only a few studies have investigated efficiency parameters of digital workflows compared with conventional pathways in implant dental medicine. This investigation shows that the digital workflow seems to be more time-efficient than the established conventional production pathway for fixed implant-supported crowns. Both clinical chair time and laboratory manufacturing steps could be effectively shortened with the digital process of intraoral scanning plus CAD/CAM technology.

The influence of contact pressure, moisture, and compression time on the performance of cotton anti-contamination clothing

The objectives of this research were (1) to study the effect of contact pressure, compression time, and liquid (moisture content of the fabric) on the transfer by sliding contact of non-fixed surface contamination to protective clothing constructed from uncoated, woven fabrics, (2) to study the effect of contact pressure, compression time, and liquid content on the subsequent penetration through the fabric, and (3) to determine if varying the type of contaminant changes the effect of contact pressure, compression time, and liquid content on the transfer by sliding contact and penetration of non-fixed surface contamination. ^ It was found that the combined influence of the liquid (moisture content of the fabric), load (contact pressure), compression time, and their interactions significantly influenced the penetration of all three test agents, sucrose- 14C, triolein-3H, and starch-14C through 100% cotton fabric. The combined influence of the statistically significant main effects and their interactions increased the penetration of triolein- 3H by 32,548%, sucrose-14C by 7,006%, and starch- 14C by 1,900%. ^

An investigation into the relationship between screen time, consumption of advertised foods, and physical activity among Texas 4th grade elementary school children

Background. The high prevalence of obesity among children has spurred creation of a list of possible causative factors, including the advertising of foods of minimal nutritional value, a decrease in physical activity, and increased media use. Few studies show prevalence rates of these factors among large cohorts of children. ^ Methods. Using data from the 2004-2005 School Physical Activity and Nutrition project (SPAN), a secondary analysis of 7907 4th-grade children (mean age 9.74 years) was conducted. In addition, a comic-book–based intervention that addressed advertised food consumption, physical activity, and media use was developed and evaluated using a pre-post test design among 4th-grade children in an urban school district. ^ Results. Among a cohort of 4th-grade children across the state of Texas, children who had more than 2 hours of video game or computer time the previous day were more than twice as likely to drink soda and eat candy or pastries. In addition, children who watched more than 2 hours of TV the previous day were more than three times as likely to consume chips, punch, soda, candy, frozen desserts, or pastries (AOR 3.41, 95% CI: 1.58, 7.37). A comic-book based intervention held great promise and acceptance among 4th-grade children. Outcome evaluation showed that while results moved in a positive direction, they were not statistically significant. ^ Conclusion. Statistically significant associations were found between screen time and eating various types of advertised food. The comic book intervention was widely accepted by the children exposed to it, and pre-post surveys indicated they moved constructs in a positive direction. Further research is needed to look at more specific ways in which children are exposed to TV, and the relationship of the TV viewing time with their consumption of advertised foods. In addition, researchers should look at comic book interventions more closely and attempt to utilize them in more in studies with a longer follow-up time. ^

The relationship between food preparation time, time spent grocery shopping, and BMI

Recent data have shown that the percentage of time spent preparing food has decreased during the past few years, and little information is know about how much time people spend grocery shopping. Food that is pre-prepared is often higher in calories and fat compared to foods prepared at home from scratch. It has been suggested that, because of the higher energy and total fat levels, increased consumption of pre-prepared foods compared to home-cooked meals can lead to weight gain, which in turn can lead to obesity. Nevertheless, to date no study has examined this relationship. The purpose of this study is to determine (i) the association between adult body mass index (BMI) and the time spent preparing meals, and (ii) the association between adult BMI and time spent shopping for food. Data on food habits and body size were collected with a self-report survey of ethnically diverse adults between the ages of 17 and 70 at a large university. The survey was used to recruit people to participate in nutrition or appetite studies. Among other data, the survey collected demographic data (gender, race/ethnicity), minutes per week spent in preparing meals and minutes per week spent grocery shopping. Height and weight were self-reported and used to calculate BMI. The study population consisted of 689 subjects, of which 276 were male and 413 were female. The mean age was 23.5 years, with a median age of 21 years. The fraction of subjects with BMI less than 24.9 was 65%, between 25 and 29.9 was 26%, and 30 or greater was 9%. Analysis of variation was used to examine associations between food preparation time and BMI. ^ The results of the study showed that there were no significant statistical association between adult healthy weight, overweight and obesity with either food preparation time and grocery shopping time. Of those in the sample who reported preparing food, the mean food preparation time per week for the healthy weight, overweight, and obese groups were 12.8 minutes, 12.3 minutes, and 11.6 minutes respectively. Similarly, the mean weekly grocery shopping for healthy, overweight, and obese groups were 60.3 minutes per week (8.6min./day), 61.4 minutes (8.8min./day), and 57.3 minutes (8.2min./day), respectively. Since this study was conducted through a University campus, it is assumed that most of the sample was students, and a percentage might have been utilizing meal plans on campus, and thus, would have reported little meal preparation or grocery shopping time. Further research should examine the relationships between meal preparation time and time spent shopping for food in a sample that is more representative of the general public. In addition, most people spent very little time preparing food, and thus, health promotion programs for this population need to focus on strategies for preparing quick meals or eating in restaurants/cafeterias. ^

Expanding Learning Time in Schools: Considering the Challenges of Implementation and the Potential Impact

Considering the broader context of school reform that is seeking education strategies that might deliver substantial impact, this article examines four questions related to the policy and practice of expanding learning time: (a) why do educators find the standard American school calendar insufficient to meet students’ educational needs, especially those of disadvantaged students? (b) how do educators implement a longer day and/or year, addressing concerns about both educational quality and costs? (c) what does research report about outcomes of expanding time in schools? and (d) what are the future prospects for increasing the number of expanded-time schools? The paper examines these questions by considering research, policy, and practice at the national level and, throughout, by drawing upon additional evidence from Massachusetts, one of the leading states in the expanded-time movement. In considering the latter two questions, the article explores the knowns and unknowns related to expanded learning time and offers suggestions for further research.