Systematic head and neck physical examination as a predictor of obstructive sleep apnea in class III obese patients

Our aim was to determine if anatomical abnormalities of the upper airway (UA) and facial skeleton of class III severely obese patients are related to the presence and severity of obstructive sleep apnea syndrome (OSAS). Forty-five patients (69% females, mean age 46.5 ± 10.8 years) with a body mass index (BMI) over 40 kg/m² underwent UA and facial skeletal examinations as well as polysomnography. Mean BMI was 49 ± 7 kg/m² and mean neck circumference was 43.4 ± 5.1 cm. Polysomnographic findings showed that 22% had a normal apnea-hypopnea index (AHI) and 78% had an AHI over 5. The presence of OSAS was associated with younger age (P = 0.02), larger neck circumference (P = 0.004), presence of a voluminous lateral wall (P = 0.0002), posteriorized soft palate (P = 0.0053), thick soft palate (P = 0.0014), long uvula (P = 0.04), thick uvula (P = 0.0052), and inferior turbinate hypertrophy (P = 0.04). A larger neck circumference (P = 0.02), presence of a voluminous lateral wall (P = 0.04), posteriorized soft palate (P = 0.03), and thick soft palate (P = 0.04) were all associated with OSAS severity. The prevalence of OSAS in this group was high. A larger neck circumference and soft tissue abnormalities of the UA were markers for both the presence and severity of OSAS. Conversely, no abnormalities in the facial skeleton were associated with OSAS in patients with morbid obesity.

Trilling race : the political economy of racialised visual-aural encounters

This thesis investigates the matter of race in the context of Finnish language acquisition among adult migrants in Finland. Here matter denotes both the materiality of race and how race comes to matter. Drawing primarily on an auto/ethno/graphic account of learning the Finnish language as a participant in the Finnish for foreigners classes, this thesis problematises the ontology and epistemology of race, i.e., what race is, how it is known, and what an engagement with race entails. Taking cues from the bodily practices of learning the Finnish trill or the rolling r, this study proposes a notion of “trilling race” and argues for an onto-epistemological dis/continuity that marks race’s arrival. The notion of dis/continuity reworks the distinction between continuity and discontinuity, and asks about the how of the arrival of any identity, the where, and the when. In so doing, an analysis of “trilling race” engages with one of the major problematics that has exercised much critical attention, namely: how to read race differently. That is, to rethink the conundrum of the need to counter “representational weight” (Puar 2007, 191) of race on the one hand, and to account for the racialised lived realities on the other. The link between a study of the phenomenon of host country language acquisition and an examination of the question of race is not as obvious as it might seem. For example, what does the argument that the process of language learning is racialised actually imply? Does it mean that race, as a process of racialisation or an ongoing configuration of sets of power relations, exerts force from an outside on the otherwise neutral process of learning the host country language? Or does it mean that race, as an identity category, presents as among the analytical perspectives, along with gender and class for instance, of the phenomenon of host country language acquisition? With these questions in mind, and to foreground the examination of the question of race in the context of Finnish language acquisition among adult migrants, this thesis opens with a discussion of the art installation Finnexia by Lisa Erdman. Finnexia is a fictitious drug said to facilitate Finnish language learning through accelerating the cognitive learning process and reducing the anxiety of speaking the Finnish language. Not only does the Finnexia installation make visible the ways in which the lack of skill in Finnish is fgured as the threshold – a border that separates the inside from the outside – to integration, but also, and importantly, it raises questions about the nature of difference, and the process of differentiation that separates the individual from the social, fact from fiction, nature from culture. These puzzles animate much of the analysis in this dissertation. These concerns continue to be addressed in the rest of part one. Whereas chapter two offers a reconsideration of the ambiguities of ethnisme/ethnicity and race, chapter three dilates on the methodological implications of a conception of the dis/continuity of race. Part two focuses on the matter of race and examines the political economy of visual-aural encounters, whereas part three shifts the focus and rethinks the possibilities and limitations of transforming racialised and normative constraints. Taking up these particular problematics, this thesis as a whole argues that race trills itself: its identity/difference is simultaneously made possible and impossible.

Paineventtiilien hitsauksen laadunhallinnan kehittäminen

Diplomityössä tarkastellaan keinoja Temet Oy:n valmistamien paineventtiilien hitsauksen laadunhallinnan kehittämiseen. Työn avulla hitsauksen laadunhallinta on tarkoitus saada vastaamaan paremmin yrityksen asiakkaiden vaatimuksia sekä samalla parantaa yrityksen kilpailukykyä. Työn alkupuolella perehdytään laatuun ja laadunhallintaan, erityisesti hitsauksen näkökulmasta. Lisäksi tutustutaan laadunhallinnan työkaluihin, ISO 9001- ja ISO 3834 -standardeihin sekä tarkemmin jälkimmäisen vaatimuksiin. Lisäksi työhön sisältyy kahden erityyppisen paineventtiilin hitseille tehtävä makrohietutkimus. Työssä haetaan myös paineventtiilien valmistukselle vaatimuksia antavia viranomaismääräyksiä tai standardeja. Oleellinen osa hitsauksen laadunhallinnan kehitystyötä on yrityksen hitsaustoiminnan nykytilanteen kartoittaminen ja tarvittavien kehitystoimien suunnittelu tehtyihin selvityksiin perustuen. Työn valmistuttua yrityksellä on ehdotus siitä, miten toteuttaa ISO 3834-2 kattavien laatuvaatimusten mukaisen hitsauksen laadunhallintajärjestelmä paineventtiilien hitsaukseen. Yrityksellä on myös laadunhallintajärjestelmän kannalta oleelliset asiakirjat ja ehdotus siitä, miten hitsauksen laadunhallinnan kehitystyötä kannattaisi tulevaisuudessa jatkaa.

Socially shared metacognitive regulation during collaborative learning processes in student dyads and small groups

Traditionally metacognition has been theorised, methodologically studied and empirically tested from the standpoint mainly of individuals and their learning contexts. In this dissertation the emergence of metacognition is analysed more broadly. The aim of the dissertation was to explore socially shared metacognitive regulation (SSMR) as part of collaborative learning processes taking place in student dyads and small learning groups. The specific aims were to extend the concept of individual metacognition to SSMR, to develop methods to capture and analyse SSMR and to validate the usefulness of the concept of SSMR in two different learning contexts; in face-to-face student dyads solving mathematical word problems and also in small groups taking part in inquiry-based science learning in an asynchronous computer-supported collaborative learning (CSCL) environment. This dissertation is comprised of four studies. In Study I, the main aim was to explore if and how metacognition emerges during problem solving in student dyads and then to develop a method for analysing the social level of awareness, monitoring, and regulatory processes emerging during the problem solving. Two dyads comprised of 10-year-old students who were high-achieving especially in mathematical word problem solving and reading comprehension were involved in the study. An in-depth case analysis was conducted. Data consisted of over 16 (30–45 minutes) videotaped and transcribed face-to-face sessions. The dyads solved altogether 151 mathematical word problems of different difficulty levels in a game-format learning environment. The interaction flowchart was used in the analysis to uncover socially shared metacognition. Interviews (also stimulated recall interviews) were conducted in order to obtain further information about socially shared metacognition. The findings showed the emergence of metacognition in a collaborative learning context in a way that cannot solely be explained by individual conception. The concept of socially-shared metacognition (SSMR) was proposed. The results highlighted the emergence of socially shared metacognition specifically in problems where dyads encountered challenges. Small verbal and nonverbal signals between students also triggered the emergence of socially shared metacognition. Additionally, one dyad implemented a system whereby they shared metacognitive regulation based on their strengths in learning. Overall, the findings suggested that in order to discover patterns of socially shared metacognition, it is important to investigate metacognition over time. However, it was concluded that more research on socially shared metacognition, from larger data sets, is needed. These findings formed the basis of the second study. In Study II, the specific aim was to investigate whether socially shared metacognition can be reliably identified from a large dataset of collaborative face-to-face mathematical word problem solving sessions by student dyads. We specifically examined different difficulty levels of tasks as well as the function and focus of socially shared metacognition. Furthermore, the presence of observable metacognitive experiences at the beginning of socially shared metacognition was explored. Four dyads participated in the study. Each dyad was comprised of high-achieving 10-year-old students, ranked in the top 11% of their fourth grade peers (n=393). Dyads were from the same data set as in Study I. The dyads worked face-to-face in a computer-supported, game-format learning environment. Problem-solving processes for 251 tasks at three difficulty levels taking place during 56 (30–45 minutes) lessons were video-taped and analysed. Baseline data for this study were 14 675 turns of transcribed verbal and nonverbal behaviours observed in four study dyads. The micro-level analysis illustrated how participants moved between different channels of communication (individual and interpersonal). The unit of analysis was a set of turns, referred to as an ‘episode’. The results indicated that socially shared metacognition and its function and focus, as well as the appearance of metacognitive experiences can be defined in a reliable way from a larger data set by independent coders. A comparison of the different difficulty levels of the problems suggested that in order to trigger socially shared metacognition in small groups, the problems should be more difficult, as opposed to moderately difficult or easy. Although socially shared metacognition was found in collaborative face-to-face problem solving among high-achieving student dyads, more research is needed in different contexts. This consideration created the basis of the research on socially shared metacognition in Studies III and IV. In Study III, the aim was to expand the research on SSMR from face-to-face mathematical problem solving in student dyads to inquiry-based science learning among small groups in an asynchronous computer-supported collaborative learning (CSCL) environment. The specific aims were to investigate SSMR’s evolvement and functions in a CSCL environment and to explore how SSMR emerges at different phases of the inquiry process. Finally, individual student participation in SSMR during the process was studied. An in-depth explanatory case study of one small group of four girls aged 12 years was carried out. The girls attended a class that has an entrance examination and conducts a language-enriched curriculum. The small group solved complex science problems in an asynchronous CSCL environment, participating in research-like processes of inquiry during 22 lessons (á 45–minute). Students’ network discussion were recorded in written notes (N=640) which were used as study data. A set of notes, referred to here as a ‘thread’, was used as the unit of analysis. The inter-coder agreement was regarded as substantial. The results indicated that SSMR emerges in a small group’s asynchronous CSCL inquiry process in the science domain. Hence, the results of Study III were in line with the previous Study I and Study II and revealed that metacognition cannot be reduced to the individual level alone. The findings also confirm that SSMR should be examined as a process, since SSMR can evolve during different phases and that different SSMR threads overlapped and intertwined. Although the classification of SSMR’s functions was applicable in the context of CSCL in a small group, the dominant function was different in the asynchronous CSCL inquiry in the small group in a science activity than in mathematical word problem solving among student dyads (Study II). Further, the use of different analytical methods provided complementary findings about students’ participation in SSMR. The findings suggest that it is not enough to code just a single written note or simply to examine who has the largest number of notes in the SSMR thread but also to examine the connections between the notes. As the findings of the present study are based on an in-depth analysis of a single small group, further cases were examined in Study IV, as well as looking at the SSMR’s focus, which was also studied in a face-to-face context. In Study IV, the general aim was to investigate the emergence of SSMR with a larger data set from an asynchronous CSCL inquiry process in small student groups carrying out science activities. The specific aims were to study the emergence of SSMR in the different phases of the process, students’ participation in SSMR, and the relation of SSMR’s focus to the quality of outcomes, which was not explored in previous studies. The participants were 12-year-old students from the same class as in Study III. Five small groups consisting of four students and one of five students (N=25) were involved in the study. The small groups solved ill-defined science problems in an asynchronous CSCL environment, participating in research-like processes of inquiry over a total period of 22 hours. Written notes (N=4088) detailed the network discussions of the small groups and these constituted the study data. With these notes, SSMR threads were explored. As in Study III, the thread was used as the unit of analysis. In total, 332 notes were classified as forming 41 SSMR threads. Inter-coder agreement was assessed by three coders in the different phases of the analysis and found to be reliable. Multiple methods of analysis were used. Results showed that SSMR emerged in all the asynchronous CSCL inquiry processes in the small groups. However, the findings did not reveal any significantly changing trend in the emergence of SSMR during the process. As a main trend, the number of notes included in SSMR threads differed significantly in different phases of the process and small groups differed from each other. Although student participation was seen as highly dispersed between the students, there were differences between students and small groups. Furthermore, the findings indicated that the amount of SSMR during the process or participation structure did not explain the differences in the quality of outcomes for the groups. Rather, when SSMRs were focused on understanding and procedural matters, it was associated with achieving high quality learning outcomes. In turn, when SSMRs were focused on incidental and procedural matters, it was associated with low level learning outcomes. Hence, the findings imply that the focus of any emerging SSMR is crucial to the quality of the learning outcomes. Moreover, the findings encourage the use of multiple research methods for studying SSMR. In total, the four studies convincingly indicate that a phenomenon of socially shared metacognitive regulation also exists. This means that it was possible to define the concept of SSMR theoretically, to investigate it methodologically and to validate it empirically in two different learning contexts across dyads and small groups. In-depth micro-level case analysis in Studies I and III showed the possibility to capture and analyse in detail SSMR during the collaborative process, while in Studies II and IV, the analysis validated the emergence of SSMR in larger data sets. Hence, validation was tested both between two environments and within the same environments with further cases. As a part of this dissertation, SSMR’s detailed functions and foci were revealed. Moreover, the findings showed the important role of observable metacognitive experiences as the starting point of SSMRs. It was apparent that problems dealt with by the groups should be rather difficult if SSMR is to be made clearly visible. Further, individual students’ participation was found to differ between students and groups. The multiple research methods employed revealed supplementary findings regarding SSMR. Finally, when SSMR was focused on understanding and procedural matters, this was seen to lead to higher quality learning outcomes. Socially shared metacognition regulation should therefore be taken into consideration in students’ collaborative learning at school similarly to how an individual’s metacognition is taken into account in individual learning.

High-Tech Commercialization Research Projects: A Pragmatic View

In the Finnish university society the commercialization research projects has not been a focus of interest until now. The reasons for the growing interest towards commercialization research projects are their possibility to develop our economy simultaneously by providing new technologies and products. This study focuses on the examination of what kind of high-technology oriented research can be commercialized and how. The aim is to generate understanding of how commercialization research projects should proceed and to find concrete ways of improving the of commercialization research projects. As its research method, the study analyzes four different university high-technology research projects which have been commercially oriented and have to some degree been able to commercialize the product or technology developed during the research phase. The data has been gathered mainly by semi-structured interviews of people involved in these particular projects or cases. The findings from the interviews have been reflected to the final reports of the projects, provided by TEKES, and later on the data gained has been compared to each other. Also a literature review has been produced about the subject of commercializing university research with the purpose of providing known theories and framework connected with the subject. The study reveals five main factors related to commercializing high-tech research. These factors are: The Team, Market potential and competitiveness, Product and technology, Funding and Steering Group. Also the uncertainties related to these factors have been addressed. As a conclusion the study provides the main aspects that should be considered when starting a commercialization research project. Also a combining hierarchical framework has been provided related to the five factors presented. In Chapter 5 the study addresses the main tasks or steps to be taken in order to get public funding for a commercially oriented research project and later on the actual steps to be executed in order to successfully commercialize these high-tech research projects.

Sustainable Development – the Key to Competitiveness CSR as an added value to Alstom’s corporate performance

Corporate social responsibility or CSR is today a widely recognized concept which is receiving in- creasing popularity extremely rapidly, especially in the business world. The pressure on companies to carry out their business practices in ethical manners, which promote the wellbeing of the environment and society, is coming from all directions and all stakeholders. Alstom, a French multinational conglomerate operating in the rail transport and energy industry, is no exception to this norm. This company, which will be used as the case example in this thesis, is being brought to bay in terms of engaging in CSR practices and practicing business with high ethics. It is surely not a negatively conceived phenomenon that CSR is being put on a pedestal – quite the opposite. Instead of corporations practicing CSR only to meet their stakeholder requirements through practicing window dressing, many corporations actually strive to benefit from the practice of corporate social business. In addition to bringing benefit to externals a corporation such as Alstom itself can benefit from being involved in CSR. The purpose of this thesis is to evaluate the current strategic values and the future perspectives of CSR at Alstom and moreover the added value which the practice of CSR could bring Alstom as a business. A set of perspectives from a futures studies viewpoint is looked at, with critical examination of the company’s current corporate practices as well as the CSR related studies and theories written for corporations. Through this, some solutions and practices will be suggested to Alstom in order for it to fully utilize the potential of corporate social business and the value it can bring in the most probable futures that the company is expected to face. By utilizing the Soft Systems Methodology (SSM), a method mainly used in organizations to solve problematic issues in management and policy contexts, a process is developed to see what improvements could be of help in improving Alstom and its way towards involving CSR in its business practices even more than it currently does. Alstom is already deeply involved in the practicing of CSR and its vision has a strong emphasis on this popular concept of today. In order to stay in the game and to use CSR as a competitive advantage to the company, Alstom ought to embed corporate social practices even deeper in its organizational culture by using them as a tool to reduce risk and costs, increasing employee commitment and customer loyalty and to attract socially responsible investors, just to name a few. CSR as a concept is seen to have great potential in the future, an opportunity Alstom will not miss.

Kaukolämpöjohdon lämpöhäviöiden talteenotto lämpöpumpputeknologian avulla

Tämän tutkimuksen tavoitteena oli laatia tarkastelumalli, jonka perusteella pystyttäisiin analysoimaan tutkimuksessa tarkasteltavan kaukolämpöjohdon lämpöhäviöiden talteenot-toratkaisun taloudellista kannattavuutta yleisellä tasolla sekä sen mahdollisissa sovellus-kohteissa. Työssä tarkastellaan kaukolämpöjohtoa, jonka sisään on sijoitettu lämmönke-ruuputki. Lämmönkeruuputken on tarkoitus kerätä lämpöä kaukolämpöjohdon vaipasta sekä pitää vaipan lämpötilaa ympäristön lämpötilaa matalampana, jolloin johdon ulkopuo-lisia lämpöhäviöitä ei synny. Tarkastelumalli laadittiin perustuen lämpöpumppuprosessin ja kaukolämpöverkoston yleisiin mitoitusperiaatteisiin sekä ratkaisuun liittyvien järjestelmien osalta kerättyihin tarkas-teluhetkeä edustaviin kustannustietoihin. Tarkastelumallista laadittiin Excel-laskentataulukkona, jota voidaan tulevaisuudessa soveltaa järjestelmän sovelluskohdekoh-taiseen tarkasteluun sekä mitoitukseen. Lasketut takaisinmaksuajat osoittautuivat kaikissa tarkastelluissa tapauksissa järjestelmien arvioitua teknistä käyttöikää lyhyemmäksi. Järjestelmällä voisi olla tietynlaisissa sovellus-kohteissa myös strateginen, kaukolämpöliiketoiminnan riskejä vähentävä merkitys.

Strategy and Superior Competence of Growth Company

This thesis is an examination of growth company and it's superior competence and performance which is based on existing theories and research findings. The theory framework is a basis for the processing part of the thesis that is utilized and combined into new thoughts and assumptions. The analysis is focused on the strategy's meaning, the content of strategy, strategy management, strategy planning, strategy tools and methods. The most important finding and discovery were that the strategy and superior competence / performance of successful growth company are rather a continuously improving process and a lifestyle than for example annual strategy project and/or separate strategy seasons.

Underwater Remote Welding Technology for Offshore Structures

The construction of offshore structures, equipment and devices requires a high level of mechanical reliability in terms of strength, toughness and ductility. One major site for mechanical failure, the weld joint region, needs particularly careful examination, and weld joint quality has become a major focus of research in recent times. Underwater welding carried out offshore faces specific challenges affecting the mechanical reliability of constructions completed underwater. The focus of this thesis is on improvement of weld quality of underwater welding using control theory. This research work identifies ways of optimizing the welding process parameters of flux cored arc welding (FCAW) during underwater welding so as to achieve desired weld bead geometry when welding in a water environment. The weld bead geometry has no known linear relationship with the welding process parameters, which makes it difficult to determine a satisfactory weld quality. However, good weld bead geometry is achievable by controlling the welding process parameters. The doctoral dissertation comprises two sections. The first part introduces the topic of the research, discusses the mechanisms of underwater welding and examines the effect of the water environment on the weld quality of wet welding. The second part comprises four research papers examining different aspects of underwater wet welding and its control and optimization. Issues considered include the effects of welding process parameters on weld bead geometry, optimization of FCAW process parameters, and design of a control system for the purpose of achieving a desired bead geometry that can ensure a high level of mechanical reliability in welded joints of offshore structures. Artificial neural network systems and a fuzzy logic controller, which are incorporated in the control system design, and a hybrid of fuzzy and PID controllers are the major control dynamics used. This study contributes to knowledge of possible solutions for achieving similar high weld quality in underwater wet welding as found with welding in air. The study shows that carefully selected steels with very low carbon equivalent and proper control of the welding process parameters are essential in achieving good weld quality. The study provides a platform for further research in underwater welding. It promotes increased awareness of the need to improve the quality of underwater welding for offshore industries and thus minimize the risk of structural defects resulting from poor weld quality.

On site measurements of DC link electrolytic capacitor bank of frequency converter using constant DC magnetization of the motor

Preventive maintenance of frequency converters has been based on pre-planned replace-ment of wearing or ageing components. Exchange intervals follow component life-time expectations which are based on empirical knowledge or schedules defined by manufac-turer. However, the lifetime of a component can vary significantly, because drives are used in very different operating environments and applications. The main objective of the research was to provide information on methods, i.e. how in-verter's operating condition can be measured reliably under field conditions. At first, the research focused on critical components such as current transducers, IGBTs and DC link capacitor bank, because these aging have already been identified. Of these, the DC link capacitor measurement method was selected for closer examination. With this method, the total capacitance and its total series resistance can be measured. The suitability of the measuring procedure was estimated on the basis of practical measurements. The research was made by using so called triangulation method, including a literature review, simulations and practical measurements. Based on the results, the new measu-rement method seems suitable with some reservations to practical measurements. How-ever, the measuring method should be further developed in order to improve its reliability.

Telahiomon tuotannon läpimenoajan ja laadun optimointi

Tämän diplomityön tarkoituksena on tunnistaa UPM Kymin telahiomon tuotannon läpimenoaikaan sekä laatuun vaikuttavia tekijöitä ja löytää keinot niiden optimoimiseksi, jotta hiontatuotannon kustannustehokkuus parantuisi. Tutkimusmenetelminä työssä käytetään Kymin telahiomon tuotannon läpimenoaikojen telakohtaista mittaamista ja hionnasta tehtyjen mittausraporttien, pinnoituksista ja hionnoista tehtyjen ostotilauksien sekä SAP R/3-toiminnanohjausjärjestelmästä saatavan kunnossapitodatan tutkintaa. Tiedon lähteenä on käytetty myös kirjallisuutta ja UPM henkilöstön sekä toimittajien haastatteluita. Muiden telahiomojen aikaansaamaan laatuun ja tuotannon läpimenoaikaan verrattuna Kymin telahiomon keskimääräiset hiontatuotannon läpimenoajat ovat telasta riippuen kaksinkertaisia tai jopa lähes nelinkertaisia, vaikka pinnankarheus jää osassa teloista alle asetetun tavoitteen. Telahiomojen muototoleransseissa ei ole niin merkittäviä eroja, mitkä selittäisivät Kymin pidemmät hiontatuotannon läpimenoajat. Tämän takia muototoleransseja ei ole päädytty muuttamaan työn aikana, mutta käyttökokemusten mukaan pinnankarheusvaatimusta voidaan laskea. Telahiontaprosessin muotohiontavaihe on suurin hiontatuotannon läpimenoaikaan ja kustannuksiin vaikuttava tekijä. Hiontamenetelmien ja hionta-arvojen optimoimisella, hiontatyökalujen lastuamiskyvyn ylläpitämisellä, telahiontatuotannon yliprosessoinnin ehkäisyllä ja laatutoleransseihin tyytymisellä voidaan lyhentää kymmeniä tunteja telahiomon tuotannon läpimenoaikaa. Mittausraporttien mukaan merkittävin muutos telahiontaprosessin kustannuksiin ja hiontatuotannon läpimenoaikaan saadaan noudattamalla laatutoleransseja. Telojen kunnossapitoon liittyviä kustannuksia syntyy turhaan lisää, kun vaihdetaan ja hiotaan käyttökelpoisia teloja sekä uudelleen pinnoitetaan teloja, joiden pinnoitepaksuus on vielä riittävä. Pinnoitepaksuuden seurannalla voidaan minimoida telojen ennenaikaiset uudelleenpinnoitukset. Mittalaitteiden avulla pystyy optimoimaan telojen hiontavälit. Hiontavälien optimointi lyhentää myös hiontajonoa. Tällöin voidaan hyödyntää suunnitellun hiontajärjestyksen tuomia etuja tehokkaammin ja saavuttaa nopeampia tuotannon läpimenoaikoja.

Metrics for Predicting User Behavior and Experience in an Interactive Storytelling System

In much of the previous research into the field of interactive storytelling, the focus has been on the creation of complete systems, then evaluating the performance of those systems based on user experience. Less focus has been placed on finding general solutions to problems that manifest in many different types of interactive storytelling systems. The goal of this thesis was to identify potential candidates for metrics that a system could use to predict player behavior or how players experience the story they are presented with, and to put these metrics to an empirical test. The three metrics that were used were morality, relationships and conflict. The game used for user testing of the metrics, Regicide is an interactive storytelling experience that was created in conjunction with Eero Itkonen. Data, in the forms of internal system data and survey answers, collected through user testing, was used to evaluate hypotheses for each metric. Out of the three chosen metrics, morality performed the best in this study. Though further research and refinement may be required, the results were promising, and point to the conclusion that user responses to questions of morality are a strong predictor for their choices in similar situations later on in the course of an interactive story. A similar examination for user relationships with other characters in the story did not produce promising results, but several problems were recognized in terms of methodology and further research with a better optimized system may yield different results. On the subject of conflict, several aspects, proposed by Ware et al. (2012), were evaluated separately. Results were inconclusive, with the aspect of directness showing the most promise.

Tulosohjauksen kehittämiskohteet Rikosseuraamuslaitoksella

Diplomityön tavoitteena on Rikosseuraamuslaitoksen tulosohjauksen kuvaaminen, mää-rittely, arviointi ja kehitysehdotusten tekeminen. Lisäksi määritellään normi- ja informaa-tio-ohjaus sekä tarkastellaan kuinka ne näkyvät tulosohjauksessa. Informaatio-ohjauksesta tuodaan esille keskeisimpiä kehityskohteita. Toiminnan tehostamistarpeet johtuvat yleisestä taloustilanteesta ja sitä seuraavasta määrärahojen pienenemisestä. Aluksi pidettiin puolistrukturoidut haastattelut, joiden perusteella kuvattiin laitoksen pro-sessikartta. Tämän jälkeen tulos- ja normiohjauksesta tehtiin eritasoisia prosessikuvauk-sia. Kuvauksilla rajattiin ja selvennettiin tarkasteltavia prosesseja. Kirjallisuuden, tutki-musten ja selvitysten avulla kartoitettiin tulosohjauksen yleisiä kehityskohteita. Niitä ver-rattiin haastattelutietoihin, arvioitiin tulosohjauksen nykytilaa ja tehtiin kehitysehdotuksia. Tulosohjauksesta löytyi useita kehityskohteita. Strategisen toimenpidesuunnitelman edis-tymiseen tulisi tehdä raportointiaikataulu. Tulostavoitteita voisi valmistella enemmän työntekijälähtöisesti ja yksiköille tulisi laatia omat strategiat. Asiakaspalautekyselyä tulisi kehittää, toteuttaa se verkkopohjaisena ja ottaa käyttöön kaikissa yksiköissä. Mittarit tuli-si liittää ydinprosesseihin ja jakaa ne laitos-alue-yksikkö -tasoille. Säännölliset raportit tulisi automatisoida ja antaa niiden tulostusoikeudet käyttäjille. Lisäksi kehittämishankkeita ja projekteja voisi hieman vähentää mutta viedä ne tehokkaammin läpi. Normi- ja informaatio-ohjaus ovat kiinteä osa tulosohjausta. Normiohjaus perustuu pääasiassa säädöksiin ja informaatio-ohjaus tiedolla ohjaamiseen. Informaatio-ohjauksessa tulisi kiinnittää huomiota aluekeskuksen tiedottamiseen, ettei yksiköitä ohjata keskushallinnosta aluekeskuksen ohi. Keskushallinnon tulisi myös päivittää ohjeistukset nopeammin erityisesti lakimuutosten yhteydessä. Myös vastuuta voisi jakaa enemmän alueille. Käyttöön voisi ottaa uuden tiedotuskanavan, esimerkiksi sähköinen uutislehtinen tai info-näytöt taukotiloissa.

Materiaalitarvelaskenta, varastonhallinta ja tilausten optimointi - Case pienpanimo

Tämä kandidaatintutkielma tarkastelee, mitkä tekijät vaikuttavat teollisuusyrityksen varastonhallinnan ja materiaalinohjauksen kokonaiskustannuksiin. Kokonaistavoitteena on tunnistaa kohdeyritykselle sopivat varaston- ja materiaalinohjauksen menetelmät sekä tunnistaa kehityskohteita tulevaisuuden kehittämistä varten. Tutkielman teoriaosassa käsitellään varastoinnin motiiveja, kustannustekijöitä ja erilaisia täydennysmenetelmiä sekä esitetään materiaalitarvelaskennan perusteita. Tältä pohjalta tutkielman empiirisessä osiossa tutkitaan kolmen eri raaka-ainetoimittajan osalta tilattavien nimikkeiden vuosikustannusten komponentit erilaisilla vuositilauslukumäärillä ja tilauseräko’oilla. Tuloksena kustannuskomponenttien tarkastelusta saadaan suuntaa antavat vuosikustannukset eri tilausmäärillä tai tilausväleillä. Tulokset pohjautuvat kuitenkin hyvin yksinkertaistettuihin taustaoletuksiin, joten suoraan tulosten pohjalta ei tule toimintatapoja muodostaa. Tutkielman perusteella voidaan todeta, että varastonhallinnan tekijät ovat keskenään ristiriitaisia, mutta oikein valituilla menetelmillä voidaan saavuttaa taloudellisia säästöjä ja kehittää toimintaa sujuvammaksi. Erityisesti materiaalitarvelaskentaan siirtyminen materiaalinhallinnassa ja ajantasainen varastokirjanpito tunnistettiin tärkeiksi jatkokehityskohteiksi.