Estimates of electronic coupling for excess electron transfer in DNA

Electronic coupling Vda is one of the key parameters that determine the rate of charge transfer through DNA. While there have been several computational studies of Vda for hole transfer, estimates of electronic couplings for excess electron transfer (ET) in DNA remain unavailable. In the paper, an efficient strategy is established for calculating the ET matrix elements between base pairs in a π stack. Two approaches are considered. First, we employ the diabatic-state (DS) method in which donor and acceptor are represented with radical anions of the canonical base pairs adenine-thymine (AT) and guanine-cytosine (GC). In this approach, similar values of Vda are obtained with the standard 6-31 G* and extended 6-31++ G* basis sets. Second, the electronic couplings are derived from lowest unoccupied molecular orbitals (LUMOs) of neutral systems by using the generalized Mulliken-Hush or fragment charge methods. Because the radical-anion states of AT and GC are well reproduced by LUMOs of the neutral base pairs calculated without diffuse functions, the estimated values of Vda are in good agreement with the couplings obtained for radical-anion states using the DS method. However, when the calculation of a neutral stack is carried out with diffuse functions, LUMOs of the system exhibit the dipole-bound character and cannot be used for estimating electronic couplings. Our calculations suggest that the ET matrix elements Vda for models containing intrastrand thymine and cytosine bases are essentially larger than the couplings in complexes with interstrand pyrimidine bases. The matrix elements for excess electron transfer are found to be considerably smaller than the corresponding values for hole transfer and to be very responsive to structural changes in a DNA stack

Funcions densitat i semblança molecular quàntica: nous desenvolupaments i aplicacions

La present tesi, tot i que emmarcada dins de la teoria de les Mesures Semblança Molecular Quántica (MQSM), es deriva en tres àmbits clarament definits: - La creació de Contorns Moleculars de IsoDensitat Electrònica (MIDCOs, de l'anglès Molecular IsoDensity COntours) a partir de densitats electròniques ajustades. - El desenvolupament d'un mètode de sobreposició molecular, alternatiu a la regla de la màxima semblança. - Relacions Quantitatives Estructura-Activitat (QSAR, de l'anglès Quantitative Structure-Activity Relationships). L'objectiu en el camp dels MIDCOs és l'aplicació de funcions densitat ajustades, ideades inicialment per a abaratir els càlculs de MQSM, per a l'obtenció de MIDCOs. Així, es realitza un estudi gràfic comparatiu entre diferents funcions densitat ajustades a diferents bases amb densitats obtingudes de càlculs duts a terme a nivells ab initio. D'aquesta manera, l'analogia visual entre les funcions ajustades i les ab initio obtinguda en el ventall de representacions de densitat obtingudes, i juntament amb els valors de les mesures de semblança obtinguts prèviament, totalment comparables, fonamenta l'ús d'aquestes funcions ajustades. Més enllà del propòsit inicial, es van realitzar dos estudis complementaris a la simple representació de densitats, i són l'anàlisi de curvatura i l'extensió a macromolècules. La primera observació correspon a comprovar no només la semblança dels MIDCOs, sinó la coherència del seu comportament a nivell de curvatura, podent-se així observar punts d'inflexió en la representació de densitats i veure gràficament aquelles zones on la densitat és còncava o convexa. Aquest primer estudi revela que tant les densitats ajustades com les calculades a nivell ab initio es comporten de manera totalment anàloga. En la segona part d'aquest treball es va poder estendre el mètode a molècules més grans, de fins uns 2500 àtoms. Finalment, s'aplica part de la filosofia del MEDLA. Sabent que la densitat electrònica decau ràpidament al allunyar-se dels nuclis, el càlcul d'aquesta pot ser obviat a distàncies grans d'aquests. D'aquesta manera es va proposar particionar l'espai, i calcular tan sols les funcions ajustades de cada àtom tan sols en una regió petita, envoltant l'àtom en qüestió. Duent a terme aquest procés, es disminueix el temps de càlcul i el procés esdevé lineal amb nombre d'àtoms presents en la molècula tractada. En el tema dedicat a la sobreposició molecular es tracta la creació d'un algorisme, així com la seva implementació en forma de programa, batejat Topo-Geometrical Superposition Algorithm (TGSA), d'un mètode que proporcionés aquells alineaments que coincideixen amb la intuïció química. El resultat és un programa informàtic, codificat en Fortran 90, el qual alinea les molècules per parelles considerant tan sols nombres i distàncies atòmiques. La total absència de paràmetres teòrics permet desenvolupar un mètode de sobreposició molecular general, que proporcioni una sobreposició intuïtiva, i també de forma rellevant, de manera ràpida i amb poca intervenció de l'usuari. L'ús màxim del TGSA s'ha dedicat a calcular semblances per al seu ús posterior en QSAR, les quals majoritàriament no corresponen al valor que s'obtindria d'emprar la regla de la màxima semblança, sobretot si hi ha àtoms pesats en joc. Finalment, en l'últim tema, dedicat a la Semblança Quàntica en el marc del QSAR, es tracten tres aspectes diferents: - Ús de matrius de semblança. Aquí intervé l'anomenada matriu de semblança, calculada a partir de les semblances per parelles d'entre un conjunt de molècules. Aquesta matriu és emprada posteriorment, degudament tractada, com a font de descriptors moleculars per a estudis QSAR. Dins d'aquest àmbit s'han fet diversos estudis de correlació d'interès farmacològic, toxicològic, així com de diverses propietats físiques. - Aplicació de l'energia d'interacció electró-electró, assimilat com a una forma d'autosemblança. Aquesta modesta contribució consisteix breument en prendre el valor d'aquesta magnitud, i per analogia amb la notació de l'autosemblança molecular quàntica, assimilar-la com a cas particular de d'aquesta mesura. Aquesta energia d'interacció s'obté fàcilment a partir de programari mecanoquàntic, i esdevé ideal per a fer un primer estudi preliminar de correlació, on s'utilitza aquesta magnitud com a únic descriptor. - Càlcul d'autosemblances, on la densitat ha estat modificada per a augmentar el paper d'un substituent. Treballs previs amb densitats de fragments, tot i donar molt bons resultats, manquen de cert rigor conceptual en aïllar un fragment, suposadament responsable de l'activitat molecular, de la totalitat de l'estructura molecular, tot i que les densitats associades a aquest fragment ja difereixen degut a pertànyer a esquelets amb diferents substitucions. Un procediment per a omplir aquest buit que deixa la simple separació del fragment, considerant així la totalitat de la molècula (calcular-ne l'autosemblança), però evitant al mateix temps valors d'autosemblança no desitjats provocats per àtoms pesats, és l'ús de densitats de Forats de fermi, els quals es troben definits al voltant del fragment d'interès. Aquest procediment modifica la densitat de manera que es troba majoritàriament concentrada a la regió d'interès, però alhora permet obtenir una funció densitat, la qual es comporta matemàticament igual que la densitat electrònica regular, podent-se així incorporar dins del marc de la semblança molecular. Les autosemblances calculades amb aquesta metodologia han portat a bones correlacions amb àcids aromàtics substituïts, podent així donar una explicació al seu comportament. Des d'un altre punt de vista, també s'han fet contribucions conceptuals. S'ha implementat una nova mesura de semblança, la d'energia cinètica, la qual consisteix en prendre la recentment desenvolupada funció densitat d'energia cinètica, la qual al comportar-se matemàticament igual a les densitats electròniques regulars, s'ha incorporat en el marc de la semblança. A partir d'aquesta mesura s'han obtingut models QSAR satisfactoris per diferents conjunts moleculars. Dins de l'aspecte del tractament de les matrius de semblança s'ha implementat l'anomenada transformació estocàstica com a alternativa a l'ús de l'índex Carbó. Aquesta transformació de la matriu de semblança permet obtenir una nova matriu no simètrica, la qual pot ser posteriorment tractada per a construir models QSAR.

Soluções sólidas vs. dispersões sólidas: impacto dos parâmetros de formulação

Filmes matriciais foram preparados com fármacos com diferentes solubilidades aquosas (tartarato de metoprolol, ibuprofeno e diclofenac Na) e diferentes polímeros (etilcelulose, Eudragit RS e Eudragit RL). Foram obtidas soluções sólidas (fármaco dissolvido) e dispersões sólidas (fármaco disperso). A libertação dos fármacos foi estudada em função do tipo de fármaco, doseamento, tipo e quantidade de aditivo e do tipo de polímero. A libertação dos fármacos não foi de acordo com a sua solubilidade aquosa, mas sim com o estado físico do fármaco na matriz. O incremento do conteúdo do fármaco na matriz aumentou a velocidade de libertação monotonicamente para a solução sólida. Em contraste, com a dispersão sólida, o aumento da dosagem de fármaco não originou quase nenhum efeito até 30 %, registando-se apenas, posteriormente, um acréscimo na sua velocidade. A inclusão de aditivos hidrofílicos aumentou principalmente a fase inicial do perfil de libertação do fármaco e não produziu efeito no plateau. Por outro lado, polietilenoglicol 1500 diminuiu a libertação de diclofenac Na devido ao aprisionamento do fármaco nos seus domínios. O efeito do tipo de polímero na libertação de ibuprofeno esteve relacionado com a partição do fármaco com o polímero. No caso do tartarato de metoprolol, a libertação foi muito mais rápida do da matriz de Eudragit RS do que de EC, devido à formação de uma mistura amorfa.

Inplante erabilerako polimero erradio-opakoen lorpena eta ezaugarritzea

[EU]Biomedikuntzan gero eta material polimeriko gehiago aplikatzen dira. Metalezko inplanteekin alderatuz, ekoizterako orduan azkarragoak eta merkeagoak baitira beste hainbat ezaugarriren artean. Baina onurak ekartzearekin batera, erradio-opakotasun eza ere badakar. Eta ezaugarri hau gabe, inplantearen jarraipena behin giza gorputzean ezarrita dagoenean ezinezkoa da, X izpiekin ezin baita ikusi. Beraz, arazo horri aurre egiteko, proiektu honetan matrize polimerikoari kargak gehitzea proposatzen da. Lortutako material konposatuak, polimeroak soilik dituen ezaugarriak berdintzea edo hobetzea espero da. Hau da, erradio-opakotasuna lortzeaz gain, propietate mekanikoak behintzat mantentzea espero da. Giza gorputzean aplikatzen diren inplanteetarako erabiliko den material konposatu bat lortzea duenez helburu proiektu honek, matrizea polimero biobataragarria eta biodegradagarria izango da. Biodegradagarria izanik, inplantea kanporatzeko bigarren ebakuntza bat ekiditen da. Zehazki, poli(D-laktida) (PDLA) polimeroa matrize moduan eta karga moduan bismuto oxidoa (Bi2O3) erabiliko dira, medikuntza arloko inplanteetan erabili izan ohi dira eta.

Pasado y futuro en la construcción de una “historia de Brasil” en el siglo XVIII (Estudios)

A partir de la conjugación entre historia de la historiografía e historia de la colonización portuguesa en América, este artículo propone el uso de las categorías pasado y futuro desarrolladas por Reinhart Koselleck como herramientas para la comprensión de los significados de construcción de una Historia de Brasil en el siglo XVIII. En esta perspectiva, el trabajo recurre a los soportes formales de las narrativas sobre el pasado colonial portugués, de matriz setecentista y seiscentista, así como a otras fuentes relacionadas. En este sentido, el artículo reevalúa las formas narrativas que, en los años posteriores a la independencia brasileña, forjaron un relato histórico unificador del pasado nacional.

Characteristics of silica-rich pedofeatures in a buried paleosol

Whitish and whitish-light brown milky-like textural pedofeatures and impregnations were found in the voids and the matrix of buried paleosols older than 2.7 million years in a site in Sardinia, Italy. The pedofeatures were described and analysed using micromorphology, X-ray diffraction and microprobe techniques, and their spatial distribution correlated with field evidence. The suite of analyses showed that the main components of the pedofeatures were more or less ordered silica phases. As well as forming a matrix cement, these pedofeatures also occurred as coatings and infillings in pores. Significant amounts of alumina and, less, Mg, Ca and Fe were also present in the pedofeatures, possibly in the form of silicate coatings and inclusions/impurities, or alumino-silicates of the adjacent soil matrix. A number of hypotheses are drawn on the possible mechanisms of formation of these silica-rich pedofeatures, including the possibility of prolonged weathering of volcanic materials and the resulting formation of colloids and more or less ordered silica phases, with successive dehydration and progressive ordering of phases during the at least 2.5 million years. (C) 2003 Elsevier B.V. All rights reserved.

Trace element partitioning and soil particle characterisation around mining and smelting areas at Tharsis, Riotinto and Huelva, SW Spain

Trace elements may present an environmental hazard in the vicinity of mining and smelting activities. However, the factors controlling trace element distribution in soils around ancient and modem mining and smelting areas are not always clear. Tharsis, Riotinto and Huelva are located in the Iberian Pyrite Belt in SW Spain. Tharsis and Riotinto mines have been exploited since 2500 B.C., with intensive smelting taking place. Huelva, established in 1970 and using the Flash Furnace Outokumpu process, is currently one of the largest smelter in the world. Pyrite and chalcopyrite ore have been intensively smelted for Cu. However, unusually for smelters and mines of a similar size, the elevated trace element concentrations in soils were found to be restricted to the immediate vicinity of the mines and smelters, being found up to a maximum of 2 kin from the mines and smelters at Tharsis, Riotinto and Huelva. Trace element partitioning (over 2/3 of trace elements found in the residual immobile fraction of soils at Tharsis) and soil particles examination by SEM-EDX showed that trace elements were not adsorbed onto soil particles, but were included within the matrix of large trace element-rich Fe silicate slag particles (i.e. 1 min circle divide at least 1 wt.% As, Cu and Zn, and 2 wt.% Pb). Slag particle large size (I mm 0) was found to control the geographically restricted trace element distribution in soils at Tharsis, Riotinto and Huelva, since large heavy particles could not have been transported long distances. Distribution and partitioning indicated that impacts to the environment as a result of mining and smelting should remain minimal in the region. (c) 2006 Elsevier B.V. All rights reserved.

Characteristics of silica-rich pedofeatures in a buried paleosol

Whitish and whitish-light brown milky-like textural pedofeatures and impregnations were found in the voids and the matrix of buried paleosols older than 2.7 million years in a site in Sardinia, Italy. The pedofeatures were described and analysed using micromorphology, X-ray diffraction and microprobe techniques, and their spatial distribution correlated with field evidence. The suite of analyses showed that the main components of the pedofeatures were more or less ordered silica phases. As well as forming a matrix cement, these pedofeatures also occurred as coatings and infillings in pores. Significant amounts of alumina and, less, Mg, Ca and Fe were also present in the pedofeatures, possibly in the form of silicate coatings and inclusions/impurities, or alumino-silicates of the adjacent soil matrix. A number of hypotheses are drawn on the possible mechanisms of formation of these silica-rich pedofeatures, including the possibility of prolonged weathering of volcanic materials and the resulting formation of colloids and more or less ordered silica phases, with successive dehydration and progressive ordering of phases during the at least 2.5 million years. (C) 2003 Elsevier B.V. All rights reserved.

Anharmonic force constant calculations

The relationship of the anharmonic force constants in curvilinear internal coordinates to the observed vibration-rotation spectrum of a molecule is reviewed. A simplified method of setting up the required non-linear coordinate transformations is described: this makes use of an / tensor, which is a straightforward generalization of the / matrix used in the customary description of harmonic force constant calculations. General formulae for the / tensor elements, in terms of the familiar L matrix elements, are presented. The use of non-linear symmetry coordinates and redundancies are described. Sample calculations on the water and ammonia molecules are reported.

Infrared actuation in aligned polymer-nanotube composites

Rubber composites containing multiwalled carbon nanotubes have been irradiated with near-infrared light to study their reversible photomechanical actuation response. We demonstrate that the actuation is reproducible across differing polymer systems. The response is directly related to the degree of uniaxial alignment of the nanotubes in the matrix, contracting the samples along the alignment axis. The actuation stroke depends on the specific polymer being tested; however, the general response is universal for all composites tested. We conduct a detailed study of tube alignment induced by stress and propose a model for the reversible actuation behavior based on the orientational averaging of the local response. The single phenomenological parameter of this model describes the response of an individual tube to adsorption of low-energy photons; its experimentally determined value may suggest some ideas about such a response.

Rovibrational energy levels of hydrogen peroxide, studied by MULTIMODE with a reaction path Hamiltonian

Recently. Carter and Handy [J. Chem. Phys. 113 (2000) 987] have introduced the theory of the reaction path Hamiltonian (RPH) [J. Chem. Phys. 72 (1980) 99] into the variational scheme MULTIMODE, for the calculation of the J = 0 vibrational levels of polyatomic molecules, which have a single large-amplitude motion. In this theory the reaction path coordinate s becomes the fourth dimension of the moment-of-inertia tensor, and must be treated separately from the remaining 3N - 7 normal coordinates in the MULTIMODE program. In the modified program, complete integration is performed over s, and the M-mode MULTIMODE coupling approximation for the evaluation of the matrix elements applies only to the 3N - 7 normal coordinates. In this paper the new algorithm is extended to the calculation of rotational-vibration energy levels (i.e. J > 0) with the RPH, following from our analogous implementation for rigid molecules [Theoret. Chem. Acc. 100 (1998) 191]. The full theory is given, and all extra terms have been included to give the exact kinetic energy operator. In order to validate the new code, we report studies on hydrogen peroxide (H2O2), where the reaction path is equivalent to torsional motion. H2O2 has previously been studied variationally using a valence coordinate Hamiltonian; complete agreement for calculated rovibrational levels is obtained between the previous results and those from the new code, using the identical potential surface. MULTIMODE is now able to calculate rovibrational levels for polyatomic molecules which have one large-amplitude motion. (C) 2003 Elsevier B.V. All rights reserved.

Ordering on multiple lengthscales in a series of side group liquid crystal block copolymers containing a cholesteryl-based mesogen

Hierarchical ordering in a side group liquid crystal block copolymer is investigated by differential scanning calorimetry, polarized optical microscopy, small-angle X-ray and neutron scattering (SAXS and SANS) and transmission electron microscopy (TEM). A series of block copolymers with a range of compositions was prepared by atom transfer radical polymerization, comprising a polystyrene block and a poly(methyl methacrylate) block bearing chiral cholesteryl mesogens. Smectic ordering is observed as well as microphase separation of the block copolymer. Lamellar structures were observed for far larger volume fractions than for coil-coil copolymers (up to a volume fraction of liquid crystal block, f(LC) = 0.8). A sample with f(LC) = 0.86 exhibited a hexagonal-packed cylinder morphology, as confirmed by SAXS and TEM. The matrix comprised the liquid crystal block, with the mesogens forming smectic layers. For the liquid crystal homopolymer and samples with high f(LC), a smectic-smectic phase transition was observed below the clearing point. At low temperature, the smectic phase comprises coexisting domains with monolayer S-A,S-1 coexisting with interdigitated S-A,S-d domains. At high temperature a SA,1 phase is observed. This is the only structure observed for samples with lower f(LC). These unprecedented results point to the influence of block copolymer microphase separation on the smectic ordering.

Liquid matrices for analyses by UV-MALDI mass spectrometry

Data are presented for a pH-adjustable liquid UV-matrix-assisted laser desorption ionization (MALDI) matrix for mass spectrometry analysis. The liquid matrix system possesses high analytical sensitivity within the same order of magnitude as that achievable by the commonly used solid UV-MALDI matrices such as 2,5-dihydroxybenzoic acid but with improved spot homogeneity and reproducibility. The pH of the matrix has been adjusted by the addition of up to 0.35% trifluoroacetic acid and up to 200 mM ammonium bicarbonate, achieving an on-target pH range of 3.5-8.6. Alteration of the pH does not seem to affect the overall sample signal intensity or signal-to-noise ratio achievable, nor does it affect the individual peptide ion signals from a mixture of peptides with varying isoelectric points (p1). In addition, the pH adjustment has allowed for the performance of a tryptic digest within the diluted pH-optimized liquid matrix.

Surface properties and locations of gluten proteins and lipids revealed using confocal scanning laser microscopy in bread dough

Surface properties of gluten proteins were measured in a dilation test and in compression and expansion tests. The results showed that monomeric gliadin was highly surface active, but polymer glutenin had almost no surface activity. The locations of those proteins in bread dough were investigated using confocal scanning laser microscopy and compared with polar and nonpolar lipids. Added gluten proteins participated in the formation of the film or the matrix, surrounding and separating individual gas cells in bread dough. Gliadin was found in the bulk of dough and gas 'cell walls'. Glutenin was found only in the bulk dough. Polar lipids were present in the protein matrix and in gas 'cell walls', as well as at the surface of some particles, which appeared to be starch granules. However, nonpolar lipid mainly occur-red on the surface of particles, which may be starch granules and small lipid droplets. It is suggested that the locations of gluten proteins in bread dough depends on their surface properties. Polar lipid participates the formation of gluten protein matrix and gas 'cell walls'. Nonpolar lipids may have an effect on the rheological properties by associating with starch granule surfaces and may form lipid droplets. (C) 2004 Published by Elsevier Ltd.

Characterisation of blends based on hydroxyethylcellulose and maleic acid-alt-methyl vinyl ether

Hydrophilic polymeric films based on blends of hydroxyethylcellulose and maleic acid-co-methyl vinyl ether were produced by casting from aqueous solutions. The physicochemical properties of the blends have been assessed using Fourier transform infrared spectroscopy, thermal gravimetric analysis, differential scanning calorimetry, dielectric spectroscopy, etc. The pristine films exhibit complete miscibility due to the formation of intermacromolecular hydrogen bonding. The thermal treatment of the blend films leads to cross-linking via intermacromolecular esterification and anhydride formation. The cross-linked materials are able to swell in water and their swelling degree can be easily controlled by temperature and thermal treatment time. The formation of the crosslinks is apparent in the dynamic properties of the blends as observed through the mechanical relaxation and dielectric relaxation spectra. The dielectric characteristics of the material are influenced by the effects of change in the local structure of the blend on the ionic conduction processes and the rate of dipolar relaxation. Separation of these processes is attempted using the dielectric modulus method. Significant deviations from a simple additive rule of mixing on the activation energy are observed consistent with hydrogen bonding and crosslinking of the matrix. This paper indicates a method for the creation of films with good mechanical and physical characteristics by exposing the blends to a relatively mild thermal treatment.