Re-framing fashion : from original and copy to adaptation

Partington notes that clothing produced by individual consumers through adaptation of patterns is contextualised as a watered down version of original couture. In its most reductive form, this notion characterises fashion as commercial and exploitative. Descriptors such as appropriation, imitation, copy and so forth have restricted the opportunity to understand fashion as a major global cultural form and institution. Therefore exploring and understanding the concept of adaptation will shift the attention from a superficial assessment of original versus imitation or copy to adaptation as a practice that provides a better framework for the understanding of designers’ and couturiers’ innovative practices and creativity, describing also the active engagement of consumers with fashion at the micro level. Adaptation can also provide a way to understand different historical shifts in the fashion system, from individual creative agency with home dressmaking and re-making to the explosion of the mass market and the consequent abandonment of such practices. Home dressmaking has been replaced by fashion remix of mass produced garments, a practice that thrives in our environment of globalised fast fashion. Thus this chapter suggests the need for a contextual requalification of concepts such as original, copy, imitation and copyright, and argues that these categories have been played against each other, but they are in fact interdependent. Today, big labels and conglomerates try to control knowledge and innovation through copyright, but, fashion escapes copyright because, in fashion, creativity is contextual. The institutionalisation of couture from 1868 served as a way to control knowledge about production processes in fashion; on the other hand, adaptation practices, often subversive, have been fundamental to the democratisation of fashion.

Cultivating the pedagogy of experience through international field trips : beyond the national context

Urban and regional planners, in the era of globalization, require being equipped with necessary skill sets to better deal with complex and rapidly changing economic, sociocultural, political, and environmental fabrics of cities and their regions. To provide such skill sets, urban and regional planning curriculum of Queensland University of Technology, Brisbane, Australia, offers planning practice in the international context. This article, first, reports the findings of pedagogic analyses of the international field trips conducted to Malaysia, Korea, Turkey, and Taiwan. The article, then, discusses the opportunities and constraints of exposure of students to planning practice beyond the Australian context.

HCI for city farms : design challenges & opportunities

Urban agriculture plays an important role in many facets of food security, health and sustainability. The city farm is one such manifestation of urban agriculture: it functions as a location centric social hub that supplies food, education, and opportunities for strengthening the diverse sociocultural fabrics of the local community. This paper presents the case of Northey Street City Farm in Brisbane, Australia as an opportunity space for design. The paper iden-tifies four areas that present key challenges and opportunities for HCI design that support social sustainability of the city farm: A preference for face-to-face contact leads to inconsistencies in shared knowledge; a dependence on volun-teers and very limited resources necessitates easily accessible interventions; other local urban agricultural activity needing greater visibility; and the vulner-ability of the physical location to natural phenomenon, in this instance flooding, present a design challenge and a need to consider disaster management.

The Stitchery collective : more than pretty clothes for pretty people

As a cultural field, the world of fashion is usually associated with ‘exclusive’ qualities such as celebrity, glamour and the value of being young beautiful and size 10. By and large fashion design courses adhere to this model of fashion production and consumption training their graduates to compete successfully in an industry that seems far removed from the notions inclusivity and connection of community engagement. However, alternative models can and do exist. This presentation tells the story of ‘the stitchery collective’ a group of graduates from QUTs Creative Industries Fashion program who are developing an innovative model of fashion practice focussed around the ideas and values both of community engagement and community cultural development. Their work to date has included projects that target specific community groups – such as “Fashioning Social Inclusion” (2010-2011) that works with Brisbane women who belong to migrant and refugee communities, as well as more recently “WARM” a workshop delivered to children at the 3rd International Kids’ Carnival hosted by La Biennale in Venice (February 2012). A common thread across these programs is a desire to investigate the premise that clothing and dress can potentially act as a lingua franca that enables connection and communication; and that in fact aspects of ‘fashion’ culture can be mobilised in a community focussed context to enhance cultural exchange. The issue of how ‘learning’ happens in these contexts provides rich scope for analysis and discussion – given the innovative and engaged nature of the work our discussion will particularly highlight the ‘leaning through doing’ that occurs as well as the ‘collective’ nature of the design processes we develop and promote. The story will include the voices and perspectives of several of the stitchery collective’s members as well as community partners.

The knock-on from the knock-off : recent shifts within Australian mass market fashion design practice

Australia's mass market fashion labels have traditionally benefitted from their peripheral location to the world's fashion centres. Operating a season behind, Australian mass market designers and buyers were well-placed to watch trends play out overseas before testing them in the Australian marketplace. For this reason, often a designer's role was to source and oversee the manufacture of 'knock-offs', or close copies of northern hemisphere mass market garments. Both Weller and Walsh have commented on this practice.12 The knock-on effect from this continues to be a cautious, derivative fashion sensibility within Australian mass market fashion design, where any new trend or product is first tested and proved overseas months earlier. However, there is evidence that this is changing. The rapid online dissemination of global fashion trends, coupled with the Australian consumer’s willingness to shop online, has meant that the ‘knock-off’ is less viable. For this reason, a number of mass market companies are moving away from the practice of direct sourcing and are developing product in-house under a northern hemisphere model. This shift is also witnessed in the trend for mass market companies to develop collections in partnership with independent Australian designers. This paper explores the current and potential effects of these shifts within Australian mass market design practice, and discusses how they may impact on both consumers and on the wider culture of Australian fashion.

The stitchery collective

The stitchery collective is fashion-based design collective. Founded in February 2010 the collective brings together creative practitioners from across an expanded field of fashion design to develop innovative new models for both the design, production and consumption of fashion in the 21st century. Under the broad question "can fashion be more than pretty clothes for pretty people?" the collective has developed a range of workshops, exhibitions and creative projects that both engage the wider public and targeted community groups. The projects include "consciousness raising: up cycling workshops, zero-waste pattern cutting workshops, and sewing workshops with members of Brisbane's Karen, Sudansese, and Iraqi communities. Through these projects we test how innovative fashion design practice can engage with questions of environmental sustainability, ethical practices, and social inclusion. Established around a set of people -centred values, the stitchery collective therefore seeks to re-cast fashion as a 'less bad' field of creative endeavor and, one that sustains, inspires and connects individuals and communities. In seeking to develop new models of fashion practice that are socially oriented and environmentally responsible the stitchery outcomes align with the broader field of Design for Sustainability.

Fire safety of buildings based on realistic fire time-temperature curves

In recent times, fire has become a major disaster in buildings due to the increase in fire loads, as a result of modern furniture and light weight construction. This has caused problems for safe evacuation and rescue activities, and in some instances lead to the collapse of buildings (Lewis, 2008 and Nyman, 2002). Recent research has shown that the actual fire resistance of building elements exposed to building fires can be less than their specified fire resistance rating (Lennon and Moore, 2003, Jones, 2002, Nyman, 2002 and Abecassis-Empis et al. 2008). Conventionally the fire rating of building elements is determined using fire tests based on the standard fire time-temperature curve given in ISO 834. This ISO 834 curve was developed in the early 1900s, where wood was the basic fuel source. In reality, modern buildings make use of thermoplastic materials, synthetic foams and fabrics. These materials are high in calorific values and increase both the speed of fire growth and heat release rate, thus increasing the fire severity beyond that of the standard fire curve. Hence it suggests the need to use realistic fire time-temperature curves in tests. Real building fire temperature profiles depend on the fuel load representing the combustible building contents, ventilation openings and thermal properties of wall lining materials. Fuel load is selected based on a review and suitable realistic fire time-temperature curves were developed. Fire tests were then performed for plasterboard lined light gauge steel framed walls for the developed realistic fire curves. This paper presents the details of the development of suitable realistic building fire curves, and the fire tests using them. It describes the fire performance of tested walls in comparison to the standard fire tests and highlights the differences between them. This research has shown the need to use realistic fire exposures in assessing the fire resistance rating of building elements.

Optical and biomechanical factors, associated with near work and myopia

Near work may play an important role in the development of myopia in the younger population. The prevalence of myopia has also been found to be higher in occupations that involve substantial near work tasks, for example in microscopists and textile workers. When nearwork is performed, it typically involves accommodation, convergence and downward gaze. A number of previous studies have examined the effects of accommodation and convergence on changes in the optics and biometrics of the eye in primary gaze. However, little is known about the influence of accommodation on the eye in downward gaze. This thesis is primarily concerned with investigating the changes in the eye during near work in downward gaze under natural viewing conditions. To measure wavefront aberrations in downward gaze under natural viewing conditions, we modified a commercial Shack-Hartmann wavefront sensor by adding a relay lens system to allow on-axis ocular aberration measurements in primary gaze and downward gaze, with binocular fixation. Measurements with the modified wavefront sensor in primary and downward gaze were validated against a conventional aberrometer using both a model eye and in 9 human subjects. We then conducted an experiment to investigate changes in ocular aberrations associated with accommodation in downward gaze over 10 mins in groups of both myopes (n = 14) and emmetropes (n =12) using the modified Shack-Hartmann wavefront sensor. During the distance accommodation task, small but significant changes in refractive power (myopic shift) and higher order aberrations were observed in downward gaze compared to primary gaze. Accommodation caused greater changes in higher order aberrations (in particular coma and spherical aberration) in downward gaze than primary gaze, and there was evidence that the changes in certain aberrations with accommodation over time were different in downward gaze compared to primary gaze. There were no obvious systematic differences in higher order aberrations between refractive error groups during accommodation or downward gaze for fixed pupils. However, myopes exhibited a significantly greater change in higher order aberrations (in particular spherical aberration) than emmetropes for natural pupils after 10 mins of a near task (5 D accommodation) in downward gaze. These findings indicated that ocular aberrations change from primary to downward gaze, particularly with accommodation. To understand the mechanism underlying these changes in greater detail, we then extended this work to examine the characteristics of the corneal optics, internal optics, anterior biometrics and axial length of the eye during a near task, in downward gaze, over 10 mins. Twenty young adult subjects (10 emmetropes and 10 myopes) participated in this study. To measure corneal topography and ocular biometrics in downward gaze, a rotating Scheimpflug camera and an optical biometer were inclined on a custom built, height and tilt adjustable table. We found that both corneal optics and internal optics change with downward gaze, resulting in a myopic shift (~0.10 D) in the spherical power of the eye. The changes in corneal optics appear to be due to eyelid pressure on the anterior surface of the cornea, whereas the changes in the internal optics (an increase in axial length and a decrease in anterior chamber depth) may be associated with movement of the crystalline lens, under the action of gravity, and the influence of altered biomechanical forces from the extraocular muscles on the globe with downward gaze. Changes in axial length with accommodation were significantly greater in downward gaze than primary gaze (p < 0.05), indicating an increased effect of the mechanical forces from the ciliary muscle and extraocular muscles. A subsequent study was conducted to investigate the changes in anterior biometrics, axial length and choroidal thickness in nine cardinal gaze directions under the actions of the extraocular muscles. Ocular biometry measurements were obtained from 30 young adults (10 emmetropes, 10 low myopes and 10 moderate myopes) through a rotating prism with 15° deviation, along the foveal axis, using a non-contact optical biometer in each of nine different cardinal directions of gaze, over 5 mins. There was a significant influence of gaze angle and time on axial length (both p < 0.001), with the greatest axial elongation (+18 ± 8 μm) occurring with infero-nasal gaze (p < 0.001) and a slight decrease in axial length in superior gaze (−12 ± 17 μm) compared with primary gaze (p < 0.001). There was a significant correlation between refractive error (spherical equivalent refraction) and the mean change in axial length in the infero-nasal gaze direction (Pearson's R2 = 0.71, p < 0.001). To further investigate the relative effect of gravity and extraocular muscle force on the axial length, we measured axial length in 15° and 25° downward gaze with the biometer inclined on a tilting table that allowed gaze shifts to occur with either full head turn but no eye turn (reflects the effect of gravity), or full eye turn with no head turn (reflects the effect of extraocular muscle forces). We observed a significant axial elongation in 15° and 25° downward gaze in the full eye turn condition. However, axial length did not change significantly in downward gaze over 5 mins (p > 0.05) in the full head turn condition. The elongation of the axial length in downward gaze appears to be due to the influence of the extraocular muscles, since the effect was not present when head turn was used instead of eye turn. The findings of these experiments collectively show the dynamic characteristics of the optics and biometrics of the eye in downward gaze during a near task, over time. These were small but significant differences between myopic and emmetropic eyes in both the optical and biomechanical changes associated with shifts of gaze direction. These differences between myopes and emmetropes could arise as a consequence of excessive eye growth associated with myopia. However the potentially additive effects of repeated or long lasting near work activities employing infero-nasal gaze could also act to promote elongation of the eye due to optical and/or biomechanical stimuli.

Zeta-potential and morphology of electrospun nano- and microfibers from biopolymers and their blends used as scaffolds in tissue engineering

Electrostatic spinning or electrospinning is a fiber spinning technique driven by a high-voltage electric field that produces fibers with diameters in a submicrometer to nanometer range.1 Nanofibers are typical one-dimensional colloidal objects with an increased tensile strength, whose length can achieve a few kilometers and the specific surface area can be 100 m2 g–1 or higher.2 Nano- and microfibers from biocompatible polymers and biopolymers have received much attention in medical applications3 including biomedical structural elements (scaffolding used in tissue engineering,2,4–6 wound dressing,7 artificial organs and vascular grafts8), drug and vaccine delivery,9–11 protective shields in speciality fabrics, multifunctional membranes, etc. Other applications concern superhydrophobic coatings,12 encapsulation of solid materials,13 filter media for submicron particles in separation industry, composite reinforcement and structures for nano-electronic machines.

Tactile abstractions [Exhibition Catalogue Essay]

Among the many meanings of abstraction is the focus on images that are at a distance from their origins. This understanding of abstraction is central to Savanhdary Vongpoothorn’s layered, textured and sensuous canvas Crossing (2003). The references in this painting to Laotian textile design and creation endows it with the sense of a fabric-like nature, gives it the feel of cloth wrapped around bodies and of threads woven into complex symmetrical patterns. Here, the distance from origins is expressed as a separation from the material forms of Lao culture. At the same time the work is a visual reference to the stretching or bending of forms, the breaking up of shapes in the natural or constructed environment, all of which create an expressive effect through the warm rose grid and visual illusions of movement and travel. This visual play suggests the sense that migration or movement is a means through which cultural forms get recoded and translated. The making of Crossing like many of Savanhdary’s works involved manipulation of the canvas through pricking and poking, and then the application of layers and dots of paint. The overall effect is one of a synthesis of different cultural motifs and the addition of new dimensions to familiar forms. This highlights the centrality of the idea of 'reassemblage’ in abstraction, the processes of remaking of self, of the natural world and of cultural artefacts. Savanhdary constructs intricate laced knots of colour and texture in work which expresses the possibilities presented by travel, migration and the subsequent remixture that emerges upon crossing through different cultural worlds.

Chinese fashion designers in Shanghai : a new perspective

Shanghai possesses an apt legacy, once referred to as “Paris of the East”. Municipal aspirations for Shanghai to assume a position among the great fashion cities of the world have been integrated in the recent re-shaping of this modern city into a role model for Chinese creative enterprise yet China is still known primarily as centre of clothing production. Increasingly however, “Made in China” is being replaced by “Created in China” drawing attention to two distinct consumer markets for Chinese designers. Fashion designers who have entered the global fashion system for education or by showing their collections have generally adopted a design aesthetic that aligns with Western markets, allowing little competitive advantage. In contrast, Chinese designers who rest their attention on the domestic Chinese market find a disparate, highly competitive marketplace. The pillars of authenticity that for foreign fashion brands extend far into their cultural and creative histories, often for many decades in the case of Louis Vuitton, Hermes and Christian Dior do not yet exist in China in this era of rapid globalisation. Here, the cultural bedrock allows these same pillars to extend only thirty years or so into the past reaching the moments when Deng Xiaoping granted China’s creative entrepreneurs passage. To this end, interviews with fashion designers in Shanghai have been undertaken during the last twelve months for a PhD dissertation. Production of culture theory has been used to identify working methods, practices of production and the social and cultural milieu necessary for designers to achieve viability. Preliminary findings indicate that some fashion designers have adopted an as-yet unexplored strategy of business and brand development with a distinct Chinese aesthetic at its core, in contrast to the clichéd cultural iconography often viewed by Western viewers as representative of Chinese creativity.

Can I touch this?

Building knowledge economies seems synonymous with re-imaging urban fabrics. Cities producing vibrant public realms are believed to have better success in distinguishing themselves within a highly competitive market. Many governments are heavily investing in cultural enhancements burgeoning distinctive cosmopolitan centers of which public art is emerging as a significant stakeholder. Brisbane’s goal to grow a knowledge-based economy similarly addresses public art. To stimulate engagement with public art Brisbane City Council has delivered an online public art catalogue and assembled three public art trails, with a fourth newly augmented. While many pieces along these trails are obviously public others question the term ‘public’ through an obscured milieu where a ‘look but don’t touch’ policy is subtly implied. This study investigates the interactional relationship between publics and public art, and in doing so, explores the concept of accessibility. This paper recommends that installations of sculpture within an emerging city should be considered in terms of economic output measured through the degree in which the public engages.

Skin cancer prevention and fashion – frontier bedfellows

Problem Queensland has the highest rates of skin cancer in the world, even after wide-ranging public programs promoting sun safety awareness. To-date, public awareness campaigns on the dangers of excessive sun exposure have been highly successful. For adolescents, however, where a significant amount of lifetime sun exposure occurs, perilous exposure still ensues, despite awareness of the risks. New frontier approaches are required to target this key audience cluster, for this significant national problem. Approach For the majority of adolescents, being part of a collective norm defines their visual, attitudinal and behavioural actions and fashion has been validated as one of the most powerful forces that can form, shape and bolster these norms. Considering clothing is the easiest method to limit the amount of skin exposed to UV, fashion (in its many subtle, yet influential guises) is proposed as an avenue to advance positive sun safe practices for adolescents. Through an action-led methodology, this research explores the potential of fashion, as one of the key parts of a complex equation, to be a prime driver to facilitate sun safety for adolescents. Findings This paper advocates that fashion, as distinguishable from clothing, has the potential to positively influence sun protective behaviour. The findings go further and recommend the use of fashion as a stealth driver for sun safety advancement, for adolescents in particular, via shifts in norms of beauty and targeted generational communication strategies. This frontier approach has the potential to significantly reduce risky sun exposure in adolescence.

Re-think, Re-generate, Re-envisage fashionable sun-safe apparel

Design is a way of thinking and working that systematically can create immense societal change. In particular, fashion design is one of the most progressively forward-looking creative and commercial generators that can envisage and initiate meaningful visual and social transformation. If we look back in time at the authority of fashion, many trends have significantly induced visual norms aligning glamour and health with tanned skin - numerous examples exist, including Vogue magazine proclaiming (front-cover) that ‘The 1929 girl must be tanned’. Indeed, in a contemporary landscape, fashion trends continue to re-generate apparel that, in-the-main, has limited design resolution connected to sun safety, and surprisingly many designers elect to ignore this vital and potentially lucrative market segment. In a context with soaring skin cancer rates, how can this powerful design medium of fashion make a positive difference to sun protection; what is the untapped potential for young design talent to connect with the health sector for skin cancer prevention; and, how can fashion designers be swayed to design and produce fashionable sun-safe apparel, that address pertinent issues including heat build up, comfort and transformability? Through a case study approach, examining emergent fashion designers, this paper will propose that astute and novel avenues exist for fashion to re-think sun protective apparel, including: generation of crucial design standards for sun-safe apparel, exploration of co-branding opportunities, advancement of fashion forecasting to connect modesty of body coverage to fashion trends and alignment of the market segment to re-envisage a critical mass for fashionable sun-safe apparel.

Design of a tangible data visualization

In this paper we describe the design of DNA Jewellery, which is a wearable tangible data representation of personal DNA profile data. An iterative design process was followed to develop a 3D form-language that could be mapped to standard DNA profile data, with the aim of retaining readability of data while also producing an aesthetically pleasing and unique result in the area of personalized design. The work explores design issues with the production of data tangibles, contributes to a growing body of research exploring tangible representations of data and highlights the importance of approaches that move between technology, art and design.