Preliminary evaluation of a nuclear scenario involving innovative gas cooled reactors

In order to guarantee a sustainable supply of future energy demand without compromising the environment, some actions for a substantial reduction of CO 2 emissions are nowadays deeply analysed. One of them is the improvement of the nuclear energy use. In this framework, innovative gas-cooled reactors (both thermal and fast) seem to be very attractive from the electricity production point of view and for the potential industrial use along the high temperature processes (e.g., H 2 production by steam reforming or I-S process). This work focuses on a preliminary (and conservative) evaluation of possible advantages that a symbiotic cycle (EPR-PBMR-GCFR) could entail, with special regard to the reduction of the HLW inventory and the optimization of the exploitation of the fuel resources. The comparison between the symbiotic cycle chosen and the reference one (once-through scenario, i.e., EPR-SNF directly disposed) shows a reduction of the time needed to reach a fixed reference level from ∼170000 years to ∼1550 years (comparable with typical human times and for this reason more acceptable by the public opinion). In addition, this cycle enables to have a more efficient use of resources involved: the total electric energy produced becomes equal to ∼630 TWh/year (instead of only ∼530 TWh/year using only EPR) without consuming additional raw materials. © 2009 Barbara Vezzoni et al.

A Pharmacology-Based Enrichment Program for Undergraduates Promotes Interest in Science.

There is a strong need to increase the number of undergraduate students who pursue careers in science to provide the "fuel" that will power a science and technology-driven U.S. economy. Prior research suggests that both evidence-based teaching methods and early undergraduate research experiences may help to increase retention rates in the sciences. In this study, we examined the effect of a program that included 1) a Summer enrichment 2-wk minicourse and 2) an authentic Fall research course, both of which were designed specifically to support students' science motivation. Undergraduates who participated in the pharmacology-based enrichment program significantly improved their knowledge of basic biology and chemistry concepts; reported high levels of science motivation; and were likely to major in a biological, chemical, or biomedical field. Additionally, program participants who decided to major in biology or chemistry were significantly more likely to choose a pharmacology concentration than those majoring in biology or chemistry who did not participate in the enrichment program. Thus, by supporting students' science motivation, we can increase the number of students who are interested in science and science careers.

Development and evaluation of a novel integrated anti-icing/de-icing technology for carbon fibre composite aerostructures using an electro-conductive textile

The preliminary evaluation is described of a new electro-thermal anti-icing/de-icing device for carbon fibre composite aerostructures. The heating element is an electro-conductive carbon-based textile (ECT) by Gorix. Electrical shorting between the structural carbon fibres and the ECT was mitigated by incorporating an insulating layer formed of glass fibre plies or a polymer film. A laboratory-based anti-icing and de-icing test program demonstrated that the film-insulated devices yielded better performance than the glssass fibre insulated ones. The heating capability after impact damage was maintained as long as the ECT fabric was not breached to the extent of causing electrical shorting. A modified structural scarf repair was shown to restore the heating capacity of a damaged specimen.

Desarrollo de un estado de la cuestión acerca de las interacciones entre el control de gestión y el aprendizaje organizacional.

Las organizaciones en la actualidad deben encontrar diferentes maneras de sobrevivir en un tiempo de rápida transformación. Uno de los mecanismos usados por las empresas para adaptarse a los cambios organizacionales son los sistemas de control de gestión, que a su vez permiten a las organizaciones hacer un seguimiento a sus procesos, para que la adaptabilidad sea efectiva. Otra variable importante para la adaptación es el aprendizaje organizacional siendo el proceso mediante el cual las organizaciones se adaptan a los cambios del entorno, tanto interno como externo de la compañía. Dado lo anterior, este proyecto se basa en la extracción de documentación soporte valido, que permita explorar las interacciones entre estos dos campos, los sistemas de control de gestión y el aprendizaje organizacional, además, analizar el impacto de estas interacciones en la perdurabilidad organizacional. ​

Avaliação da interação universidade - empresas - governo no desenvolvimento de projetos inovadores no RN por micro e pequenas empresas

Knowledge and innovation were seen as major forces, both for survival, as the acquisition of competitive advantages in the Brazilian economy, as well as adding value to the product as a market differentiator. The Triple Helix model is directed toward the knowledge-based economy. Over the past six years, the Federal Government through the Financier of Studies and Projects ( FINEP ) invested in technological innovation projects, economic subsidies, about U.S. $ 1 billion supporting more than 800 projects with these resources. According to the MCTI , the Northeast, over the years 2000 to 2010 increased spending on Science and Technology (considering the activities of research and development more scientific and related activities) of the State Government in relation to its total revenue In 2000, 0.51% of total revenues were invested in Science & Technology, while in 2010 this figure increased to 1.31%. Among the nine Northeast states, Paraíba is highlighted. In 2000, 0.33% of its total revenues were directed to innovation, reaching 2.04% in 2010, the largest increase in the region while the RN invested 0.24% in 2000 and in 2010 reached the level of 1.42 %. According to IBGE, in the period 2000-2011, the micro and small enterprises surpassed the barrier of 6 million establishments. In 2000, there were 4.2 million establishments while in 2011 were 6.3 million active establishments. Therefore, throughout the period, there was a creation of approximately 2.1 million new establishments. Between 2000 and 2011, micro and small businesses have created 7.0 million formal jobs, 8.6 million jobs in 2000 to 15.6 million in 2011. This scenario shows the importance of this study in relation to the investment of governments in RD & I in micro and small enterprises. This study aims to analyze the interaction Universities - Business - Government in the development of innovation in micro and small companies in Rio Grande do Norte participants of the edicts of Inova FAPERN. We chose to adopt as a research method case study concerning the procedure of the research, exploratory, descriptive, and on documents with engineers and researchers of innovation projects approved by PAPPE Subsidy (Inova -RN I, II and III). Data collection was done through the report made by FAPERN entitled: " Evaluation of companies financed and supported by the Grant Program for Technological Innovation for Micro and Small Enterprises RN - INOVA -RN " (2010) and a questionnaire with 40 closed questions and 1 opened to 30 affirmative composed based on a 5-point Likert scale. The analysis of data was qualitative and quantitative. The study provided to identify the importance and barriers arising from the relation between Government Enterprise (micro and small) and University as essential to the economic development of the region. It was also identified that, in the innovation projects, 70% of the goods or services originating from research were to market these, 50% resulted in a patent for the company and 80% publications of scientific articles

Study of the components of quality in SO2-free wines obtained by innovative vinification protocols. Evaluation of the pre-fermentative addition of lysozyme and oenological tannins.

The research performed during the PhD candidature was intended to evaluate the quality of white wines, as a function of the reduction in SO2 use during the first steps of the winemaking process. In order to investigate the mechanism and intensity of interactions occurring between lysozyme and the principal macro-components of musts and wines, a series of experiments on model wine solutions were undertaken, focusing attention on the polyphenols, SO2, oenological tannins, pectines, ethanol, and sugar components. In the second part of this research program, a series of conventional sulphite added vinifications were compared to vinifications in which sulphur dioxide was replaced by lysozyme and consequently define potential winemaking protocols suitable for the production of SO2-free wines. To reach the final goal, the technological performance of two selected yeast strains with a low aptitude to produce SO2 during fermentation were also evaluated. The data obtained suggested that the addition of lysozyme and oenological tannins during the alcoholic fermentation could represent a promising alternative to the use of sulphur dioxide and a reliable starting point for the production of SO2-free wines. The different vinification protocols studied influenced the composition of the volatile profile in wines at the end of the alcoholic fermentation, especially with regards to alcohols and ethyl esters also a consequence of the yeast’s response to the presence or absence of sulphites during fermentation, contributing in different ways to the sensory profiles of wines. In fact, the aminoacids analysis showed that lysozyme can affect the consumption of nitrogen as a function of the yeast strain used in fermentation. During the bottle storage, the evolution of volatile compounds is affected by the presence of SO2 and oenological tannins, confirming their positive role in scaveging oxygen and maintaining the amounts of esters over certain levels, avoiding a decline in the wine’s quality. Even though a natural decrease was found on phenolic profiles due to oxidation effects caused by the presence of oxygen dissolved in the medium during the storage period, the presence of SO2 together with tannins contrasted the decay of phenolic content at the end of the fermentation. Tannins also showed a central role in preserving the polyphenolic profile of wines during the storage period, confirming their antioxidant property, acting as reductants. Our study focused on the fundamental chemistry relevant to the oxidative phenolic spoilage of white wines has demonstrated the suitability of glutathione to inhibit the production of yellow xanthylium cation pigments generated from flavanols and glyoxylic acid at the concentration that it typically exists in wine. The ability of glutathione to bind glyoxylic acid rather than acetaldehyde may enable glutathione to be used as a ‘switch’ for glyoxylic acid-induced polymerisation mechanisms, as opposed to the equivalent acetaldehyde polymerisation, in processes such as microoxidation. Further research is required to assess the ability of glutathione to prevent xanthylium cation production during the in-situ production of glyoxylic acid and in the presence of sulphur dioxide.

Performance evaluation of low environmental impact asphalt concretes using the mechanistic empirical design method based on laboratory fatigue and permanent deformation models

The "sustainability" concept relates to the prolonging of human economic systems with as little detrimental impact on ecological systems as possible. Construction that exhibits good environmental stewardship and practices that conserve resources in a manner that allow growth and development to be sustained for the long-term without degrading the environment are indispensable in a developed society. Past, current and future advancements in asphalt as an environmentally sustainable paving material are especially important because the quantities of asphalt used annually in Europe as well as in the U.S. are large. The asphalt industry is still developing technological improvements that will reduce the environmental impact without affecting the final mechanical performance. Warm mix asphalt (WMA) is a type of asphalt mix requiring lower production temperatures compared to hot mix asphalt (HMA), while aiming to maintain the desired post construction properties of traditional HMA. Lowering the production temperature reduce the fuel usage and the production of emissions therefore and that improve conditions for workers and supports the sustainable development. Even the crumb-rubber modifier (CRM), with shredded automobile tires and used in the United States since the mid 1980s, has proven to be an environmentally friendly alternative to conventional asphalt pavement. Furthermore, the use of waste tires is not only relevant in an environmental aspect but also for the engineering properties of asphalt [Pennisi E., 1992]. This research project is aimed to demonstrate the dual value of these Asphalt Mixes in regards to the environmental and mechanical performance and to suggest a low environmental impact design procedure. In fact, the use of eco-friendly materials is the first phase towards an eco-compatible design but it cannot be the only step. The eco-compatible approach should be extended also to the design method and material characterization because only with these phases is it possible to exploit the maximum potential properties of the used materials. Appropriate asphalt concrete characterization is essential and vital for realistic performance prediction of asphalt concrete pavements. Volumetric (Mix design) and mechanical (Permanent deformation and Fatigue performance) properties are important factors to consider. Moreover, an advanced and efficient design method is necessary in order to correctly use the material. A design method such as a Mechanistic-Empirical approach, consisting of a structural model capable of predicting the state of stresses and strains within the pavement structure under the different traffic and environmental conditions, was the application of choice. In particular this study focus on the CalME and its Incremental-Recursive (I-R) procedure, based on damage models for fatigue and permanent shear strain related to the surface cracking and to the rutting respectively. It works in increments of time and, using the output from one increment, recursively, as input to the next increment, predicts the pavement conditions in terms of layer moduli, fatigue cracking, rutting and roughness. This software procedure was adopted in order to verify the mechanical properties of the study mixes and the reciprocal relationship between surface layer and pavement structure in terms of fatigue and permanent deformation with defined traffic and environmental conditions. The asphalt mixes studied were used in a pavement structure as surface layer of 60 mm thickness. The performance of the pavement was compared to the performance of the same pavement structure where different kinds of asphalt concrete were used as surface layer. In comparison to a conventional asphalt concrete, three eco-friendly materials, two warm mix asphalt and a rubberized asphalt concrete, were analyzed. The First Two Chapters summarize the necessary steps aimed to satisfy the sustainable pavement design procedure. In Chapter I the problem of asphalt pavement eco-compatible design was introduced. The low environmental impact materials such as the Warm Mix Asphalt and the Rubberized Asphalt Concrete were described in detail. In addition the value of a rational asphalt pavement design method was discussed. Chapter II underlines the importance of a deep laboratory characterization based on appropriate materials selection and performance evaluation. In Chapter III, CalME is introduced trough a specific explanation of the different equipped design approaches and specifically explaining the I-R procedure. In Chapter IV, the experimental program is presented with a explanation of test laboratory devices adopted. The Fatigue and Rutting performances of the study mixes are shown respectively in Chapter V and VI. Through these laboratory test data the CalME I-R models parameters for Master Curve, fatigue damage and permanent shear strain were evaluated. Lastly, in Chapter VII, the results of the asphalt pavement structures simulations with different surface layers were reported. For each pavement structure, the total surface cracking, the total rutting, the fatigue damage and the rutting depth in each bound layer were analyzed.

Master of Education in Teaching Program with an Emphasis in the Health Sciences

Introduction: Concerns about the quality of physician education have changed current medical education practices. Learners must demonstrate competency in core areas, rather than solely participating in educational activities. Academic medical institutions are challenged with identifying leaders to direct curricular and evaluation reforms. An innovative partnership between the University of Houston College of Education and Baylor College of Medicine, the University of Texas Medical School at Houston, and the University of Texas Dental Branch at Houston offers a Masters of Education in Teaching degree with an emphasis in Health Sciences. Courses encompass fundamental areas including curriculum, instruction, technology, measurement, research design and statistics. [See PDF for complete abstract]

Using technology to teach technology: design and evaluation of bilingual online physician education about electronic medical records.

The "EMR Tutorial" is designed to be a bilingual online physician education environment about electronic medical records. After iterative assessment and redesign, the tutorial was tested in two groups: U.S. physicians and Mexican medical students. Split-plot ANOVA revealed significantly different pre-test scores in the two groups, significant cognitive gains for the two groups overall, and no significant difference in the gains made by the two groups. Users rated the module positively on a satisfaction questionnaire.

Development and evaluation of a cervical cancer screening program for Chinese women

Despite of the proven efficacy of the Pap test, Asian populations still have low Pap screening compliance. The purpose of this dissertation was to investigate factors that influencing women's decision to obtain a Pap test, and to describe the development and evaluation of a cervical cancer educational program promoting the Pap screening behavior among women in Taiwan. ^ The first study examined factors associated with Pap screening compliance. Psychometric properties of measurement instruments were also assessed. The scale reliabilities were as the follows: Cronbach alpha 0.70 for knowledge scale, 0.88 for pros scale, 0.68 for cons scale, and 0.72 for perceived norms scale. Results from multiple logistic regression analysis, after adjusted for marital status, showed women who compliant to Pap screening guidelines had significantly higher knowledge, higher perceived benefits (pros), lower perceived barriers (cons), and higher perceived norms to receive a Pap test. ^ The second study described the development of a program called “Love yourself before you take care of your family”, designed to increase Pap screening behavior among women in Taiwan. The development of this program was guided by Intervention Mapping (IM), an innovative process of intervention design. The program used methods such as information transmission, modeling, persuasion, and facilitation. Strategies included direct mail campaigns, role model stories with women's testimonials, and phone intervention. ^ The third study examined the effectiveness of a randomized trial of the carefully-designed intervention (N = 424). Participants were female family members of inpatients admitted to one of the major teaching hospitals in Taiwan during August and September 1999. Women in the intervention group reported a higher rate of receiving a Pap test than women in the control group (50% versus 32%) after a three-month intervention (p = 0.002). Women in the intervention group showed increased knowledge (p = .016), perceived pros (p = 0.008), and susceptibility (p = .011) between baseline and follow-up. They also showed higher perceived pros of Pap tests than women in control group at follow-up (p = .031). This result suggested that program development based on theories and evidences could maximize the intervention impact for a specific target population. ^

TECHNOLOGY ASSESSMENT: SMALL-VOLUME INFUSION PUMPS

"Technology assessment is a comprehensive form of policy research that examines the short- and long-term social consequences of the application or use of technology" (US Congress 1967).^ This study explored a research methodology appropriate for technology assessment (TA) within the health industry. The case studied was utilization of external Small-Volume Infusion Pumps (SVIP) at a cancer treatment and research center. Primary and secondary data were collected in three project phases. In Phase I, hospital prescription records (N = 14,979) represented SVIP adoption and utilization for the years 1982-1984. The Candidate Adoption-Use (CA-U) diffusion paradigm developed for this study was germane. Compared to classic and unorthodox curves, CA-U more accurately simulated empiric experience. The hospital SVIP 1983-1984 trends denoted assurance in prescribing chemotherapy and concomitant balloon SVIP efficacy and efficiency. Abandonment of battery pumps was predicted while exponential demand for balloon SVIP was forecast for 1985-1987. In Phase II, patients using SVIP (N = 117) were prospectively surveyed from July to October 1984; the data represented a single episode of therapy. The questionnaire and indices, specifically designed to measure the impact of SVIP, evinced face validity. Compeer group data were from pre-SVIP case reviews rather than from an inpatient sample. Statistically significant results indicated that outpatients using SVIP interacted socially more than inpatients using the alternative technology. Additionally, the hospital's education program effectively taught clients to discriminate between self care and professional SVIP services. In these contexts, there was sufficient evidence that the alternative technology restricted patients activity whereas SVIP permitted patients to function more independently and in a social lifestyle, thus adding quality to life. In Phase III, diffusion forecast and patient survey findings were combined with direct observation of clinic services to profile some economic dimensions of SVIP. These three project phases provide a foundation for executing: (1) cost effectiveness analysis of external versus internal infusors, (2) institutional resource allocation, and (3) technology deployment to epidemiology-significant communities. The models and methods tested in this research of clinical technology assessment are innovative and do assess biotechnology. ^

Planning, implementation, and evaluation of an HIV -screening program for pregnant women

The purpose of this study was to evaluate the effectiveness of an HIV-screening program at a private health-care institution where the providers were trained to counsel pregnant women about the HIV-antibody test according to the latest recommendations made by the U.S. Public Health Service (PHS) and the Texas legislature. A before-and-after study design was selected for the study. The participants were OB/GYN nurses who attended an educational program and the patients they counseled about the HIV test. Training improved the nurses' overall knowledge about the content of the program and nurses were more likely to offer the HIV test to all pregnant women regardless of their risk of infection. Still, contrary to what was predicted, the nurses did not give more information to increase the knowledge pregnant women had about HIV infection, transmission, and available treatments. Consequently, many women were not given the chance to correctly assess their risk during the counseling session and there was no evidence that knowledge would reduce the propensity of many women to deny being at risk for HIV. On the other hand, pregnant women who received prenatal care after the implementation of the HIV-screening program were more likely to be tested than women who received prenatal care before its implementation (96% vs. 48%); in turn, the likelihood that more high-risk women would be tested for HIV also increased (94% vs. 60%). There was no evidence that mandatory testing with right of refusal would deter women from being tested for HIV. When the moment comes for a woman to make her decision, other concerns are more important to her than whether the option to be tested is mandatory or not. The majority of pregnant women indicated that their main reasons for being tested were: (a) the recommendation of their health-care provider; and (b) concern about the risks to their babies. Recommending that all pregnant women be tested regardless of their risk of infection, together with making the HIV test readily available to all women, are probably the two best ways of increasing the patients' participation in an HIV-screening program for pregnant women. ^

Relevance evaluation of engineering masters program in Peru

In a context of mass higher education, it is necessary to ensure not only quality but also the relevance of engineering master's programs, namely the appropriateness of the objectives and outcomes to the needs and interests of the program beneficiaries. After a literature review we analyzed the evaluation models of three organizations in Peru: the Board of Evaluation, Accreditation and Certification of the University Education Quality CONEAU, the Institute of Quality and Accreditation of Computing, Engineering and Technology - ICACIT and the Pontificia Universidad Catolica del Peru. The result of this study is a model for relevance evaluation for an engineering master¿s program in Peru.

Evaluation of the multi-element capabilities of collision/reaction cell inductively coupled plasma - mass spectrometry in wine analysis

This work explores the multi-element capabilities of inductively coupled plasma - mass spectrometry with collision/reaction cell technology (CCT-ICP-MS) for the simultaneous determination of both spectrally interfered and non-interfered nuclides in wine samples using a single set of experimental conditions. The influence of the cell gas type (i.e. He, He+H2 and He+NH3), cell gas flow rate and sample pre-treatment (i.e. water dilution or acid digestion) on the background-equivalent concentration (BEC) of several nuclides covering the mass range from 7 to 238 u has been studied. Results obtained in this work show that, operating the collision/reaction cell with a compromise cell gas flow rate (i.e. 4 mL min−1) improves BEC values for interfered nuclides without a significant effect on the BECs for non-interfered nuclides, with the exception of the light elements Li and Be. Among the different cell gas mixtures tested, the use of He or He+H2 is preferred over He+NH3 because NH3 generates new spectral interferences. No significant influence of the sample pre-treatment methodology (i.e. dilution or digestion) on the multi-element capabilities of CCT-ICP-MS in the context of simultaneous analysis of interfered and non-interfered nuclides was observed. Nonetheless, sample dilution should be kept at minimum to ensure that light nuclides (e.g. Li and Be) could be quantified in wine. Finally, a direct 5-fold aqueous dilution is recommended for the simultaneous trace and ultra-trace determination of spectrally interfered and non-interfered elements in wine by means of CCT-ICP-MS. The use of the CCT is mandatory for interference-free ultra-trace determination of Ti and Cr. Only Be could not be determined when using the CCT due to a deteriorated limit of detection when compared to conventional ICP-MS.