Avaliação de híbridos simples braquíticos de milho super doce (Zea mays L.) portadores do gene shrunken-2 (sh2sh2) utilizando o esquema dialélico parcial

Pós-graduação em Agronomia (Agricultura) - FCA

Métodos de ressoma no super-espaço aplicados ao modelode O’Raifeartaigh

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Production and evaluation of recycled polymers from açaí fibers

The possibility of recycling and the favorable mechanical properties of the products have encouraged the study and production of thermoplastic composites from natural fibrous waste. Açaí (cabbage palm) fiber, which is removed from the seed, has been slightly investigated, as compared to what is already known about the fruit pulp. In this study, the influence of açaí fiber as an element of reinforcement in recycled everyday usage thermoplastics using simple, low cost methodology was evaluated. Recycled matrixes of high impact polystyrene and polypropylene were molded by hot compression from which the fiber composites were obtained. The FTIR technique showed that the process was efficient in preventing degradation of the açaí fibers. The influence of the fiber on the mechanical behavior of the recycled matrixes was investigated by microscopic images of compression and impact tests. The results showed better impact performance for the fiber combined with the polymeric matrixes.

Estudo da interação entre camadas de super-redes supercondutor/isolante/ferromagneto

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Structural and optical properties of brominated plasma polymers

Novel brominated amorphous hydrogenated carbon (a-C:H:Br) films were produced by the plasma polymerization of acetylene-bromoform mixtures. The main parameter of interest was the degree of bromination, which depends on the partial pressure of bromoform in the plasma feed, expressed as a percentage of the total pressure, R-B. When bromoform is present in the feed, deposition rates of up to about 110 nm min(-1) may be obtained. The structure and composition of the films were characterized by Transmission Infrared Reflection Absorption Spectroscopy (IRRAS) and X-ray Photo-electron Spectroscopy (XPS). The latter revealed that films with atomic ratios Br:C of up to 0.58 may be produced. Surface contact angles, measured using goniometry, could be increased from similar to 63 degrees (for an unbrominated film) to similar to 90 degrees for R-B of 60 to 80%. Film surface roughness, measured using a profilometer, does not depend strongly on R-B. Optical properties the refractive index, n, absorption coefficient, alpha(E), where E is the photon energy, and the optical gap, E-g, were determined from film thicknesses and data obtained by Transmission Ultraviolet-Visible Near Infrared Spectroscopy (UVS). Control of n was possible via selection of R-B. The measured optical gap increases with increasing F-BC, the atomic ratio of Br to C in the film, and semi-empirical modeling accounts for this tendency. A typical hardness of the brominated films, determined via nano-indentation, was similar to 0.5 GPa. (C), 2013 Elsevier B.V. All rights reserved.

Type-II defects in the super-Liouville theory

The introduction of type-II defects is discussed under the Lagrangian formalism and Lax representation for the N = 1 super-Liouville model. We derive a new kind of super-Backlund transformation for the model and show explicitly the conservation of the modified energy and momentum, as well as supercharge.

N=1 super sinh-Gordon model in the half line: breather solutions

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeito do nadar sobre o desempenho do pedal e corrida no triathlon super-sprint

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of the length of alkyl side chains in the electronic structure of conjugated polymers

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Mucoadhesive beads of gellan gum/pectin intended to controlled delivery of drugs

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Suitability of carbon fiber-reinforced polymers as power cable cores: Galvanic corrosion and thermal stability evaluation

The increasing demand for electrical energy and the difficulties involved in installing new transmission lines presents a global challenge. Transmission line cables need to conduct more current, which creates the problem of excessive cable sag and limits the distance between towers. Therefore, it is necessary to develop new cables that have low thermal expansion coefficients, low densities, and high resistance to mechanical stress and corrosion. Continuous fiber-reinforced polymers are now widely used in many industries, including electrical utilities, and provide properties that are superior to those of traditional ACSR (aluminum conductor steel reinforced) cables. Although composite core cables show good performance in terms of corrosion, the contact of carbon fibers with aluminum promotes galvanic corrosion, which compromises mechanical performance. In this work, three different fiber coatings were tested (phenol formaldehyde resin, epoxy-based resin, and epoxy resin with polyester braiding), with measurements of the galvanic current. The use of epoxy resin combined with polyester braiding provided the best inhibition of galvanic corrosion. Investigation of thermal stability revealed that use of phenol formaldehyde resin resulted in a higher glass transition temperature. On the other hand, a post-cure process applied to epoxy-based resin enabled it to achieve glass transition temperatures of up to 200 degrees C. (C) 2014 Elsevier Ltd. All rights reserved.

Effect of Beverages and Mouthwashes on the Hardness of Polymers Used in Intraoral Prostheses

PurposeThe mechanical properties of acrylic resins used in intraoral prostheses may be altered by frequent exposure to liquids such as beverages and mouthwashes. This study aimed to evaluate the effect of thermocycling and liquid immersion on the hardness of four brands of acrylic resins commonly used in removable prostheses (Onda Cryl, QC-20, Classico, Lucitone).Materials and MethodsFor each brand of resin, seven specimens were immersed in each of six solutions (coffee, cola, red wine, Plax-Colgate, Listerine [LI], Oral B), and seven more were placed in artificial saliva (control). The hardness was tested using a microhardness tester before and after 5000 thermocycles and after 1, 3, 24, 48, and 96 hours of immersion. The results were analyzed using three-way repeated-measures ANOVA and Tukey's test (p < 0.05).ResultsThe hardness of the resins decreased following thermocycling and immersion in the solutions. Specimens immersed in cola and wine exhibited significant decreases in hardness after immersion for 96 hours, although the greatest significant decrease in hardness occurred in specimens immersed in LI. However, according to American Dental Association specification 12, the Knoop hardness of acrylic resins for intraoral prostheses should not be below 15. Thus, the median values of superficial hardness observed in most of the acrylic resins in this study are considered clinically acceptable.ConclusionsThe microhardness of polymers used for intraoral prostheses decreases following thermocycling. Among specimens immersed in beverages, those immersed in cola or wine experienced the greatest decrease in microhardness. Immersion of acrylic resins in LI significantly decreased the microhardness in relation to the initial value. Among the resins assessed, QC-20 exhibited the lowest initial hardness.

Sexual Precocity of Nellore Bulls that are Offspring of Super Precocious, Precocious and Normal Cows in Extensive Farming Conditions

Contents The objective of this work was to verify that mothers classified as super precocious (M1) and precocious (M2) produce more precocious bulls than females classified as normal (M3). This study included 21186 animals with an average age of 21.29 +/- 1.77months that underwent a breeding soundness evaluation from 1999 to 2008. Of these animals, 2019, 6059 and 13108 were offspring of M1, M2 and M3 females, respectively. In the breeding soundness examination, the animals were classified as sound for reproduction, sound under a natural mating regime, unsound for reproduction and discarded. To compare the averages obtained for each category of mother within the individual breeding soundness classes, a chi-square test with a 5% error probability was used, considering the effects of year and month of birth and farm. For the three classes of mothers (M1, M2 and M3), 67.26, 67.22 and 64.16% of bull calves were considered sound for reproduction and 19.71, 19.46 and 21.90% were considered unsound for reproduction, respectively. There was no difference in the frequency of animals that were sound for reproduction under the natural breeding regime between the three classes of mothers (8.87, 9.31 and 9.19%, respectively). There was a difference between the numbers of precocious and normal females that were discarded, with frequencies of 4.01 and 4.75%, respectively (p<0.05). There were differences in year and month of birth and farm between super precocious and precocious cows in relation to the breeding soundness classification of the animals. It was concluded that the bull offspring of super precocious and precocious cows presented a higher percentage of approval in the breeding soundness examination than the bull offspring of normal cows, demonstrating that the selection for precocity of females has contributed to an increase in the sexual precocity of the herd in relation to the sexual maturity of bulls.

Comparison of polymers and ceramics in new and discarded electrical insulators: reuse and recycling possibilities

The expansion and maintenance of electricity distribution networks generates large amounts of waste, much of it in the form of discarded insulators that are not reused or recycled. This paper describes the results of tests on used and new ceramic and polymeric insulators to verify if their exposure to weathering justifies their replacement. In new and used ceramic insulators, properties such as contact angle, relative density, porosimetry, dilatometry and X-ray diffraction patterns showed no differences or the differences that were found could not be related to their use. The discarded ceramic material showed high thermal stability, an interesting characteristic for application as chamotte. It can also be reused to replace gravel used in substations. In polymeric insulators, thermogravimetry, differential scanning calorimetry and relative density test results suggest degradation of used material compared to new. This would justify their replacement and discard as waste, but they show little recycling potential.