Variance prediction in sea

A method is presented for predicting the variance of the energy levels in a built-up system to accompany the mean values predicted by SEA. Closed form expressions for the variance are obtained in terms of the standard SEA parameters and an additional set of parameters αk that describe the nature of the power input to each subsystem k, and αks that describe the nature of the coupling between subsystems k and s.

Development of off-shore and deep-sea fishing in Sri Lanka

Since 1950 onwards, a practice has grown in Sri Lanka of dividing the marine fisheries into three different classes depending on the location of the resource to be exploited viz. coastal fishing, off-shore fishing and deep-sea fishing. The author describes commercial fishing activities, paying attention to changes emerged and future prospectives.

Problems facing the deep-sea fishing industry in Sri Lanka

Fishing in Sri Lanka has been carried on largely with the use of traditional methods and in recent years there has been a marked increase in the use of mechanized craft for fishing. Although some effort has been made in the sphere of deep-sea fishing both by trawlers and long line tuna boats, such efforts have not made a significant contribution towards improving the industry. The progress of deep-sea fishing in Sri Lanka has been hindered due to a number of reasons described by the author.

Demersal fishery resources of Sri Lanka and its present level of exploitation with special reference to off-shore and deep-sea waters

Following a brief review of development of demersal fishing off Sri Lanka, the author reviews the fishing grounds of the Wadge Bank, the Pedro Bank, and the Mannar Bank. He reviews the deepwater trawling fisheries particularly in relation to the 1972 survey conducted by the 'Optimist' and also small boat trawling in coastal waters. Lastly he considers handlining for groundfish, which is principally conducted by fishermen operating traditional craft.

Pelagic fishery resources of Sri Lanka and its present level of exploitation with special reference to off-shore and deep-sea waters

Pelagic resources around Sri Lanka may be categorized into three major groups: (1) the small pelagic varieties such as the sprats, halmessa, sardines (salaya, soodaya), and herrings (hurulla). (2) the medium size pelagic species such as the mackerel (kumbala and bolla), barracuda (jeela), seer Spanish mackerel (thora), frigate mackeral (alagoduwa), mackerel tuna (atawalla) and the skipjack (balaya). (3) the large size fishes such as yellow fin tuna (kelawalla), big eye tuna, marlins (koppora and gappara), sail fish (thalapath), sharks (mora) and rays (maduwa). Production levels of exploited resources are noted, and seasonal patterns and annual in their abundance are considered. On the basis of observations and estimations of the existing fisheries, and the results of experimental fishing, figures are presented of the potential yield of those species already exploited. The development of that potential depends on the development of modern techniques of pole and line fishing, application of tuna longline and shark longline, increasing the number of units of drift nets and the introduction of a bait fishery for the longline and pole line fishery. Some features upon which the successes of any venture to exploit such resources are noted, particularly those which relate to the nature of the fishing vessels used.

Operatives for off-shore and deep-sea fishing vessels

The need for operatives for the offshore and deep-sea fishing vessels is currently very great, and the importance of fisheries training has long been recognized by the Department of Fisheries. In 1974 the Sri Lanka Fisheries Training Institute was established with Japanese aid. The author discusses the purpose and functions of the institute, the first batch of trainees from which finished their training in June 1977. Annexes describe the courses offered, diplomas and certificates, admission requirements, and the conditions required for candidates sitting second-hand fishing vessel examination of the Mercantile Marine Department, Bombay District.

Infrastructure facilities for deep-sea and off-shore fishing

The author presents a brief account of the infrastructure facilities required for the fishing industry. He describes those facilities presently available in Sri Lanka, and those that are under construction, and gives a few suggestions indicating the nature of infrastructure facilities that are vital to the local situation at its present stage of development. The principal facilities discussed are (1) fish landing places; (2) unloading handling facilities; (3) vessel servicing facilities; and (4) navigation aids.

Private sector to invest in off-shore fishing and to encourage the financial incentives to be introduced for deep-sea fishing in Sri Lanka

The author discusses the financial aspects of private sector investment in off-shore fishing, with particular attention to tax incentives, such as those offered to tourist hotels, which are considered applicable to the current case of fishing vessel purchase, and the operation of the vessels themselves, hiring, publicity and profitability. Tax incentives which were introduced to encourage investment in the tourist industry should be introduced to encourage investment in the fishing industry on the lines presented. It is essential that wide publicity be given for the incentives introduced so as to achieve the desired results.

Comparison of stabilised/solidified mixes of model drill cuttings based on the North Sea and Red Sea Areas

Following the global stringent legislations regulating the wastes generated from the drilling process of oil exploration and production activities, the management of hazardous drill cuttings has become one of the pressing needs confronting the petroleum industry. Most of the prevalent treatment techniques adopted by oil companies are extremely expensive and/or the treated product has to be landfilled without any potential end-use; thereby rendering these solutions unsustainable. The technique of stabilisation/solidification is being investigated in this research to treat drill cuttings prior to landfilling or for potential re-use in construction products. Two case studies were explored namely North Sea and Red Sea. Given the known difficulties with stabilising/solidifying oils and chlorides, this research made use of model drill cutting mixes based on typical drill cutting from the two case studies, which contained 4.2% and 10.95% average concentrations of hydrocarbons; and 2.03% and 2.13% of chlorides, by weight respectively. A number of different binders, including a range of conventional viz. Portland cement (PC) as well as less-conventional viz. zeolite, or waste binders viz. cement kiln dust (CKD), fly ash and compost were tested to assess their ability to treat the North Sea and Red Sea model drill cuttings. The dry binder content by weight was 10%, 20% and 30%. In addition, raw drill cuttings from one of the North Sea offshore rigs were stabilised/solidified using 30% PC. The characteristics of the final stabilised/solidified product were finally compared to those of thermally treated cuttings. The effectiveness of the treatment using the different binder systems was compared in the light of the aforementioned two contaminants only. A set of physical tests (unconfined compressive strength (UCS)), chemical tests (NRA leachability) and micro-structural examinations (using scanning electron microscopy (SEM), and X-ray diffraction (XRD)) were used to evaluate the relative performance of the different binder mixes in treating the drill cuttings. The results showed that the observed UCS covered a wide range of values indicating various feasible end-use scenarios for the treated cuttings within the construction industry. The teachability results showed the reduction of the model drill cuttings to a stable non-reactive hazardous waste, compliant with the UK acceptance criteria for non-hazardous landfills: (a) by most of the 30% and 20% binders for chloride concentrations, and (b) by the 20% and 30% of compost-PC and CKD-PC binders for the Red Sea cuttings. The 20% and 30% compost-PC and CKD-PC binders successfully reduced the leached oil concentration of the North Sea cuttings to inert levels. Copyright 2007, Society of Petroleum Engineers.

The storage of red snapper (Lutjanus spp.) in ice, chilled sea water and chilled fresh water

The results are given of trials conducted to determine the effect on quality of holding fish (Lutjanus species) in chilled freshwater and also to compare the quality loss of fish stored in chilled seawater and chilled freshwater and in ice. No adverse effects were observed when storing in chilled freshwater apart from loss of external appearance after 6 days storage; taste panel tests showed acceptable conditions up to 15 days. Chilled seawater is unsuitable for storage as it spoils the intake of salt from the medium, making the flesh unpalatable.

Sources of the deep water masses in the northern Red Sea

The hydrographic structure of the northern Red Sea indicated that, the surface waters of temperature around 22°C, salinity of 40.1OO%o and dt = 28.1 might sink to depths between 400-500 m by convective overturn, contributing to the formation of the mid-deep Red Sea waters. Below the 500 db depth down to the bottom the water column is stable. The geostrophic circulation clearly indicated an inflow of water from the Red Sea towards NNW, along the main axis of the sea. Arriving at the northern edge of the sea, it sends a branch in the Gulf of Aqaba, turns to the west, and sends another branch to the Gulf of Suez, but its main mass reaches the African coast where it sets southward along this coast. A large cyclonic gyre centered near 27 deg 30'N and 34 deg l0'E is detected at the head of the Red Sea deep waters. The effect of the outflow of the bottom water of the Gulf of Suez on the formation of the deep water of the Red Sea is limited.

Heat budget studies of the north Arabian Sea during summer and winter seasons, 1992

In this study heat budget components and momentum flux for August and January 1992 over the north Arabian Sea are computed. The marine meteorological data measured on board during the cruises of PAK-US joint project (NASEER) are used for the computation. Significant differences were found in the heat budget components as well as in the momentum flux during different monsoon periods over the north Arabian Sea. The latent heat flux was always positive and attributed to the large vapour pressure gradient. The computed moisture and latent heat fluxes in January were higher than August The highest value of latent heat flux 309 W/m2 at station 8 was evaluated. These higher latent heat fluxes were due to the large vapour pressure gradient, air-sea temperature difference, the wind speed, and the prevailing wind direction (from north and northeast). Negative values of sensible heat fluxes in both seasons indicate that the heat transfer was from the atmosphere to the ocean. The negative values of net heat gain indicate that the sea surface field became an energy sink: or the sea surface supplied more energy to the atmosphere than it received from it. Large variation in the momentum flux mainly attributed to the variation in the wind speed. Aerial averages of heat and momentum fluxes were also computed.

Phycochemical studies on sterols from three brown seaweeds of northern Arabian Sea

Three brown algae i.e. Dictyota hauckiana Nizamuddin, Levringia boergesenii Kylin and Spatoglossum variabile Figari et De Notaris, collected from the coastal areas of Karachi, have been investigated for their sterol composition. Four sterols with cholesta skeleton including a new one, 17α-hydroxy-24β-vinyl cholesterol have been isolated from them. Their structures were elucidated with the help of spectroscopic analysis. The new sterol has been named as hauckiosterol after its first source of isolation.

Description of stomatopod larvae from the Arabian Sea

The Northern Arabian Sea Ecological and Environmental Research (NASEER) Programme cruise I, January, 1992 and other collections from Manora Channel (Karachi) were examined. Six stages i.e. IV, VII, VIII, IX, X and XI of stomatopod larvae are recognized. Day samples talen in 1994 (January to December) from Manora Channel revealed the presence of only three specimens of stage IV. They all belong to the family Squillidae. Each stage is measured, described and illustrated. None of the stages could be correlated to their adults.