902 resultados para SUBSTRATE LENGTH


Relevância:

20.00% 20.00%

Publicador:

Resumo:

Settlement is a critical process in the life history of crabs, and thus affecting the abundance, distribution and structure of estuarine communities. The spatial pattern of settlement of megalopae of the shore crab Carcinus maenas along a longitudinal estuarine gradient (Mira River Estuary, Portugal) was examined, as well as its effects on the juvenile population. To measure megalopal settlement, four replicate collectors were deployed in six equally spaced stations along the estuarine axis. Juveniles were collected on the same locations with a quadrat randomly deployed on the substrate. To assess fine-scale megalopal settlement within a curved region of the estuary, replicate collectors were deployed on both margins along Moinho da Asneira curve. Megalopae settled differently along the six longitudinal points, with a tendency to attenuate their settlement upstream. Within the curved region, megalopae preferentially settled on the left margin collectors, probably due to the weaker velocity speeds felt on this margin. Concerning the overall juvenile density, there were significant differences among the stations distributed along the estuary, but they did no reflect a longitudinal dispersion attenuation pattern. Size-frequency distribution of the juvenile population showed that the average size is higher on the left margin. Recruits (carapace length between 1.0 mm and 3.4 mm) were more abundant on the upstream stations. Density of early juveniles (3.4 mm-6.5 mm) and juveniles (6.5 mm-10 mm) was more stable throughout the estuary axis than that of recruits. This distribution pattern may result from tidal excursion processes or mechanisms to avoid biotic interactions, such as predation and competition. (c) 2006 Elsevier Ltd. All rights reserved.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Our findings revealed two distinct patterns of substrate preparation: the pattern of leaf-cutting ants foraging on dicotyledons is marked by highly fragmented substrate resulting in a more advanced initial decomposition. The pattern of leaf-cutting ants harvesting grasses is characterized by large pieces of substrate, resulting in little initial decomposition. Ants foraging on both types of plants are apparently intermediary between the two patterns, although more similar to the patterns of those foraging on dicotyledons. Also, the behavior of scraping the substrate was described for the first time, it is very important for the removal of the epicuticular wax layer of the leaves helping the growth of the symbiotic fungus.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Fluorescence amplified fragment length polymorphism (fAFLP) was used to assess the genetic relatedness of 40 Staphylococcus aureus strains isolated from human and animal skin samples in seven dairy farms with manual milking. S. aureus was isolated from 11 out of 30 (36%) human skin samples and from 29 out of 100 (29%) teat skin samples from apparently healthy cows. Genomic DNA from each isolate was double-digested with EcoRI and MseI and complementary oligonucleotide adaptors were ligated to the restriction fragments. Pre-selective and selective, amplification reactions were performed, the amplified fragments were separated by electrophoresis in an ABI377 sequencer and analysed using GeneScan 3.1 and Genotyper 2.5. Three single isolates (a-c), a predominant cluster with 35 isolates (d) and another cluster with two isolates (e) were identified. Both clusters d and e included human and animal isolates genetically related, because the profiles had 90-100% homology. Since no cluster was comprised uniquely of human or animal isolates and given the close genetic relatedness among human and animal samples in the farms, the present findings support the. hypothesis that dairy workers can spread S. aureus through manual milking. (C) 2005 Elsevier B.V. All rights reserved.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Biosurfactants are bioactive agents that can be produced by many different microorganisms. Among those, special attention is given to yeasts, since they can produce many types of biosurfactants in large scale, using several kinds of substrates, justifying its use for industrial production of those products. For this production to be economically viable, the use of residual carbon sources is recommended. The present study isolated yeasts from soil contaminated with petroleum oil hydrocarbons and assessed their capacity for producing biosurfactants in low cost substrates. From a microbial consortium enriched, seven yeasts were isolated, all showing potential for producing biosurfactants in soybean oil. The isolate LBPF 3, characterized as Candida antarctica, obtained the highest levels of production - with a final production of 13.86 g/L. The isolate LBPF 9, using glycerol carbon source, obtained the highest reduction in surface tension in the growth medium: approximately 43% of reduction after 24 hours of incubation. The products obtained by the isolates presented surfactant activity, which reduced water surface tension to values that varied from 34 mN/m, obtained from the product of isolates LBPF 3 and 16 LBPF 7 (respectively characterized as Candida antarctica and Candida albicans) to 43 mN/m from the isolate LPPF 9, using glycerol as substrate. The assessed isolates all showed potential for the production of biosurfactants in conventional sources of carbon as well as in agroindustrial residue, especially in glycerol.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Pseudomonas aeruginosa LBI produced surface active rhamnolipids when cultivated on waste from the sunflower-oil process under different conditions. These biosurfactants, which reduce the superficial and interfacial tensions between fluids, offer advantages over their chemical counterparts, especially because of their ecological acceptability. These molecules can be used in fields as diverse as chemical, pharmaceutical and petrochemical industries. In this work, we present the effect of C/N ratio on growth and production yield. The best production yields (Y-P/S) were achieved for C/N ratios (in g/g) of 8/1 (0.22) and 6.4/1 (0.23). The product concentration was very satisfactory (7.3 g/L) at C/N ratio of 8/1, especially when considering that the substrate was basically composed of wastes that would otherwise constitute an environmental disposal problem. (c) 2007 Elsevier Ltd. All rights reserved.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Visando estudar a tolerância do picão-preto (Bidens pilosa) a diferentes níveis de pH do substrato, conduziu-se um ensaio em condições de câmara de crescimento e utilizando-se a técnica de hidroponia, no qual três plântulas foram transplantadas para recipientes contendo solução nutritiva de Hoagland & Arnon, com pH ajustado para 3,5, 4,0, 5,0, 6,0, 7,0 e 8,0. O delineamento experimental utilizado foi o inteiramente casualizado com três repetições. Ao final do período experimental, 42 dias após o transplante, observou-se que as plantas que se desenvolveram nos pHs 3,5 e 8,0 apresentaram-se menores, com menor comprimento e volume do sistema radicular, menor número de folhas vivas e, consequentemente, menor peso de matéria seca das folhas, caule e raízes. Os teores de N e S nas raízes diminuiram com o aumento do pH do substrato, enquanto os de Ca e Mg aumentaram e os de K e P diminuiram no pH 5,0 a 6,0. No caule, apenas o teor de Mg foi afetado pelo pH, mostrando resposta positiva. Na folha obteve-se os maiores teores de P, S, Ca e Mg quando a planta se desenvolveu em pH 6,0. Não se constatou diferença significativa entre os efeitos dos pHs 5,0, 6,0 e 7,0 nos parâmetros avaliados, sendo que foi no pH 6,0 que se estimou, através de análise de regressão, melhor desenvolvimento do picão-preto. Concluiu-se que o picãopreto apresenta melhor desenvolvimento em pHs próximo ao neutro, com certa tolerância a pHs extremos (3,5 e 8,0).

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Este trabalho teve por objetivo descrever a morfologia dos diásporos e as suas fases de germinação, bem como determinar o substrato mais adequado para a germinação das sementes e o crescimento das plântulas de palmeira-da-rainha (Archontophoenix alexandrae (F. Mueller) H. Wendl. e Drude). Periodicamente, unidades representativas de cada fase de germinação foram retiradas para as descrições morfológicas. Os substratos utilizados foram Plantmax®, areia, terra (latossolo roxo) e outro com proporções iguais de terra, areia e esterco (TAE). Foi instalado um experimento em delineamento inteiramente casualizado. Avaliaram-se a porcentagem, o tempo médio de germinação e o crescimento inicial das plântulas aos 135 dias após a emergência, com base na altura, diâmetro do colo e número, comprimento e largura das folhas. As sementes são albuminosas, com endosperma ruminado e oleaginoso, e o embrião é lateral, periférico e relativamente indiferenciado. A germinação é do tipo criptocotiledonar hipógea, iniciando-se com a formação de uma massa de células indiferenciadas na depressão micropilar. Essa massa de células torna-se cilíndrica, com a diferenciação dos primórdios caulinares e radiculares. Concomitantemente, ocorre o desenvolvimento de raízes adventícias no eixo embrionário. O substrato mais indicado para a germinação de sementes de palmeira-da-rainha é o Plantmax®, porém, para o crescimento inicial, indica-se Plantmax® e TAE.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This study aimed to determine the indole-3-butyric acid (IBA) requirement and proper concentration for Caesalpinia echinata rooting in a hydroponic system for plantlet production. The experiment was conducted in a greenhouse of the 'Faculdade de Ciencias Agrarias e Veterinarias', UNESP, in Jaboticabal, São Paulo state. The vegetal material consisted of 160 stem cuttings that were 11 to 12 cm in length with two pairs of leaves, prepared from young seedlings. The cutting bases were treated by slow immersion in 5% ethanol solution containing 0, 100, 200 and 400 mg L-1 of IBA during 14 hours and by fast immersion in 50% ethanol solution containing 0, 1000, 3000 and 5000 mg L-1 of IBA during 5 seconds. The cuttings were maintained in the hydroponic system for 90 days and, for additional 90 days in plastic bags containing substrate (Plantmax (R)) under intermittent mist. After 90 and 180 days of rooting, the percentage of cuttings that survived, the rooting percentage and the number and length of adventious root were evaluated. Cuttings should be treated with IBA at 100 mg L-1 for 14 hours and placed to root in a hydroponic system.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This experiment aimed at evaluating the influence of different heating times of settable eggs of Cobb 500® broiler breeders before submitting them to different storage periods on egg weight loss, embryo mortality, and hatchability. A total number of 1,980 eggs were distributed in a completely randomized experimental design with a 3 x 3 factorial arrangement, comprising nine treatments with 22 replicates of 10 eggs each. The following factors were analyzed: pre-storage heating periods (0, 6, 12 hours at 36.92°C) and storage periods (4, 9, 14 days at 12.06°C). After storage, eggs were incubated under usual conditions, and were transferred to the hatcher at 442 hours of incubation. Eggs were weighed before heating, incubation, and transference to determine weight loss. Partial hatchability was determined at 480 hours, and total hatchability at 498 hours of incubation. Embryo mortality was determined in non-hatched eggs. It was concluded that heating eggs for six hour before storage improves incubation results as it decreases incubation length and late embryo mortality, therefore its use can be indicated in commercial operations. Storing eggs for 14 days and pre-heating for 14 days and pre-heating for 12 hours severely impair incubation results, and therefore are not recommended.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

An experiment was carried out to evaluate the effect of different heating times of settable eggs of Cobb 500® broiler breeders before submitting them to different storage periods on body weight, digestive tract organ weights, and intestinal mucosa morphology of newly-hatched chicks. Settable eggs were distributed in a completely randomized experimental design with a 3 x 3 factorial arrangement: pre-storage heating periods (0, 6, 12 hours at 36.92°C) and storage periods (4, 9, 14 days at 12.06°C). Body weight and relative weights of the yolk sac, heart, liver, proventriculus+gizzard, and intestinal segments were measured in chicks hatching at 480 and 498 hours of incubation. Villi height, width and perimeter, and crypt depth (ìm) were measured in duodenal histological sections. It was concluded that pre-storage heating for six hours of eggs stored for four or nine days increases small intestine weight of newly-hatched chicks, but does not influence the morphology of the duodenal mucosa. Pre-storage heating for 12 hours negatively influences body weight and duodenal mucosa development, and therefore this practice is not recommended. Storage length does not have consistent effect on body weight and development of the gastrointestinal tract.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Com o objetivo de avaliar o desempenho de quatro genótipos de soja-hortaliça, em dois anos agrícolas, foi instalado um ensaio, em área da UNESPFCAV, Campus de Jaboticabal-SP. O delineamento experimental adotado foi de blocos casualizados, com quatro genótipos e cinco repetições, para cada ano agrícola. Cada parcela experimental foi constituída por quatro linhas de plantio, com 3 m de comprimento, dispostas no espaçamento de 0,10 m entre plantas e 0,60 m nas entrelinhas, sendo consideradas para avaliação 20 plantas por parcela, das duas linhas centrais. As sementes foram semeadas em bandejas de poliestireno expandido de 128 células, contendo substrato Plantmax Hortaliças®. O transplante ocorreu dez dias após a semeadura, sendo que o solo já estava devidamente preparado, conforme recomendações para a cultura. A colheita foi realizada quando as vagens estavam em estádio reprodutivo R6. Avaliaram-se os genótipos: JLM003; JLM010; JLM018 e CNPSoI quanto às características: altura de inserção da primeira vagem, número médio de vagens por planta, número médio de sementes por vagem, produção de vagens por planta, massa fresca de 100 sementes e produtividade estimada de grãos imaturos. de acordo com os resultados obtidos, concluiu-se que, dentre os genótipos avaliados, JLM003, JLM010 e CNPSoI foram os mais produtivos, e quando semeados em dezembro apresentam produtividades maiores do que quando semeados em setembro.