Preparação e avaliação das propriedades catalíticas de materiais do tipo SAPO-11 na hidroisomerização de n-decano

Neste trabalho efectuou-se o estudo do comportamento de catalisadores bifuncionais do tipo SAPO-11, contendo 0,5% em massa de platina, em que foram efectuadas alterações durante o processo de síntese, na reacção de hidroisomerização do n-decano. As modificações efectuadas nos catalisadores foram: quantidade de silício; utilização di-propilamina (DPA) como agente estruturante ou a mistura de di-proppilamina (DPA) e metilamina (MA), funcionando esta última como co-estruturante; diferentes tempos de cristalização (24 e 12h); e a introdução de nióbio (Nb). Os catalisadores preparados foram caracterizados recorrendo às técnicas de difracção de raio-X, microscopia electrónica de varrimento, adsorção de N2, adsorção de piridina acompanhada por espectroscopia de infravermelho, reacção de hidrogenação do tolueno e quimissorção de H2. A quantidade de Si afecta a acidez e, ligeiramente, a actividade hidrogenante, levando a uma diminuição da selectividade aos produtos mono-ramificados com o aumento de Si. A utilização de MA aumenta, significativamente, o tamanho dos cristais, reflectindo-se na menor selectividade aos isómeros mono-ramificados. Nos catalisadores preparados com menor tempo de cristalização o crescimento dos cristais não é completo, sendo o seu tamanho inferior aos preparados com 24h com consequente diminuição da cristalinidade dos materiais. A presença de Nb exerce um efeito na acidez dos catalisadores e na não uniformidade do tamanho dos cristais, provocando o aumento da selectividade aos produtos multi-ramificados e reacções de craking.

Nanocrystalline p-layer for a-Si:H p-i-n solar cells and photodiodes

We report on structural, electronic, and optical properties of boron-doped, hydrogenated nanocrystalline silicon (nc-Si:H) thin films deposited by plasma-enhanced chemical vapor deposition (PECVD) at a substrate temperature of 150 degrees C. Film properties were studied as a function of trimethylboron-to-silane ratio and film thickness. The absorption loss of 25% at a wavelength of 400 nm was measured for the 20 nm thick films on glass and glass/ZnO:Al substrates. By employing the p(+) nc-Si:H as a window layer, complete p-i-n structures were fabricated and characterized. Low leakage current and enhanced sensitivity in the UV/blue range were achieved by incorporating an a-SiC:H buffer between the p- and i-layers.

A 3-phase model for VIS/NIR mu C-Si : H p-i-n detectors

The spectral response and the photocurrent delivered by entirely microcrystalline p-i-n-Si:H detectors an analysed under different applied bias and light illumination conditions. The spectral response and the internal collection depend not only on the energy range but also on the illumination side. Under [p]- and [n]-side irradiation, the internal collection characteristics have an atypical shape. It is high for applied bias and lower than the open circuit voltage, shows a steep decrease near the open circuit voltage (higher under [n]-side illumination) and levels off for higher voltages. Additionally, the numerical modeling of the VIS/NIR detector, based on the band discontinuities near the grain boundaries and interfaces, complements the study and gives insight into the internal physical process.

Enhanced short wavelength response in laser-scanned-photodiode image sensor using an a-SiC : H/a-Si : H tandem structure

We report in this paper the recent advances we obtained in optimizing a color image sensor based on the laser-scanned-photodiode (LSP) technique. A novel device structure based on a a-SiC:H/a-Si:H pin/pin tandem structure has been tested for a proper color separation process that takes advantage on the different filtering properties due to the different light penetration depth at different wavelengths a-SM and a-SiC:H. While the green and the red images give, in comparison with previous tested structures, a weak response, this structure shows a very good recognition of blue color under reverse bias, leaving a good margin for future device optimization in order to achieve a complete and satisfactory RGB image mapping. Experimental results about the spectral collection efficiency are presented and discussed from the point of view of the color sensor applications. The physics behind the device functioning is explained by recurring to a numerical simulation of the internal electrical configuration of the device.

ITO/SiOx/Si optical sensor with internal gain

A visible/near-infrared optical sensor based on an ITO/SiOx/n-Si structure with internal gain is presented. This surface-barrier structure was fabricated by a low-temperature processing technique. The interface properties and carder transport were investigated from dark current-voltage and capacitance-voltage characteristics. Examination of the multiplication properties was performed under different light excitation and reverse bias conditions. The spectral and pulse response characteristics are analysed. The current amplification mechanism is interpreted by the control of electron current by the space charge of photogenerated holes near the SiOx/Si interface. The optical sensor output characteristics and some possible device applications are presented.

Modificação de estruturas zeolíticas por dessilicação: caracterização da porosidade e da acidez por técnicas de adsorção e catálise

Este trabalho experimental teve como objectivo a dessilicação dos zeólitos MOR, BEA, MFI e FER de acordo com condições experimentais descritas na literatura e ainda a optimização das condições de dessilicação para o zeólito MOR, onde se variaram os parâmetros: temperatura, tempo e concentração de solução de NaOH. As amostras foram caracterizadas recorrendo a técnicas de caracterização estrutural, morfológica, textural e de acidez, nomeadamente difracção de raios X, microscopia electrónica de varrimento, adsorção de azoto a baixa temperatura, espectroscopia de infravermelho, “cracking” do n-heptano e adsorção de piridina seguida de espectroscopia de infravermelho. Nas estruturas dessilicadas, de acordo com a literatura registaram-se diferenças relativamente aos resultados publicados, o que pode dever-se às diferentes características dos materiais estudados, nomedamente a razão Si/Al e o tamanho dos cristais. Verificou-se assim que o desenvolvimento de mesoporosidade é fortemente influenciado pelas propriedades dos materiais de partida. No estudo de optimização das condições de dessilicação para a estrutura MOR, verificou-se que a amostra que conduziu a melhores resultados de propriedades texturais, estruturais, morfológicas e de acidez foi a amostra sujeita a tratamento alcalino com uma solução de NaOH com uma concentração de 0,2 M, à temperatura de 85 ºC durante 2 horas. O tratamento alcalino resultou no desenvolvimento de mesoporosidade, evidenciado pelo aumento de número de moles adsorvidas a pressões relativas elevadas e também devido à presença de uma forma de histerese do tipo H4. A extracção de sílicio da rede do zeólito através do tratamento alcalino foi alcançado. Este facto pode ser comprovado através da análise dos espectros de infravermelho, concretamente através da análise da região correspondente às bandas estruturais, verificando-se um desvio de banda correspondente ao estiramento assimétrico das ligações T-O-T, sensivelmente a 1090 cm-1, para valores menores. Por fim, procedeu-se à realização do tratamento alcalino com recurso à radiação microondas, tendo-se obtido resultados idênticos aos de algumas amostras cuja dessilicação foi realizada convencionalmente, mas num tempo de tratamento inferior.

SU(5) x SU(5) unification revisited

The idea of grand unification in a minimal supersymmetric SU(5) x SU(5) framework is revisited. It is shown that the unification of gauge couplings into a unique coupling constant can be achieved at a high-energy scale compatible with proton decay constraints. This requires the addition of minimal particle content at intermediate energy scales. In particular, the introduction of the SU(2)(L) triplets belonging to the (15, 1)+((15) over bar, 1) representations, as well as of the scalar triplet Sigma(3) and octet Sigma(8) in the (24, 1) representation, turns out to be crucial for unification. The masses of these intermediate particles can vary over a wide range, and even lie in the TeV region. In contrast, the exotic vector-like fermions must be heavy enough and have masses above 10(10) GeV. We also show that, if the SU(5) x SU(5) theory is embedded into a heterotic string scenario, it is not possible to achieve gauge coupling unification with gravity at the perturbative string scale.

Phase diagrams of particles with dissimilar patches: X-junctions and Y-junctions

We use Wertheim's first-order perturbation theory to investigate the phase behaviour and the structure of coexisting fluid phases for a model of patchy particles with dissimilar patches (two patches of type A and f(B) patches of type B). A patch of type alpha = {A, B} can bond to a patch of type beta = {A, B} in a volume nu(alpha beta), thereby decreasing the internal energy by epsilon(alpha beta). We analyse the range of model parameters where AB bonds, or Y-junctions, are energetically disfavoured (epsilon(AB) < epsilon(AA)/2) but entropically favoured (nu(AB) >> nu(alpha alpha)), and BB bonds, or X-junctions, are energetically favoured (epsilon(BB) > 0). We show that, for low values of epsilon(BB)/epsilon(AA), the phase diagram has three different regions: (i) close to the critical temperature a low-density liquid composed of long chains and rich in Y-junctions coexists with a vapour of chains; (ii) at intermediate temperatures there is coexistence between a vapour of short chains and a liquid of very long chains with X-and Y-junctions; (iii) at low temperatures an ideal gas coexists with a high-density liquid with all possible AA and BB bonds formed. It is also shown that in region (i) the liquid binodal is reentrant (its density decreases with decreasing temperature) for the lower values of epsilon(BB)/epsilon(AA). The existence of these three regions is a consequence of the competition between the formation of X- and Y-junctions: X-junctions are energetically favoured and thus dominate at low temperatures, whereas Y-junctions are entropically favoured and dominate at higher temperatures.

Desilication of MOR zeolite: Conventional versus microwave assisted heating

MOR zeolites were modified via desilication treatments with NaOH, under conventional and microwave heating. The samples were characterized by powder X-ray diffraction, (27)Al and (29)Si NMR spectroscopy. TEM and N(2) adsorption at -196 degrees C. The acidity of the samples and the space available inside the pores were evaluated through a catalytic model reaction, the isomerization of m-xylene, for which the profiles of the coke thermal decomposition were also analyzed. Powder X-ray diffraction and (29)Si and (27)Al MNR results show that in comparison with conventional heating, microwave irradiation (a less time consuming process) leads to identical amount of Si extraction from the zeolite framework. With this treatment. in addition to the customary mesopores development promoted by conventional heating, a partial conversion of the zeolite microporosity into larger micropores, is observed. The microwave irradiated and conventionally heated samples show different catalytic behavior in the m-xylene isomerization model reaction. It was observed that, by controlling the experimental conditions, it is possible to obtain samples with catalytic properties closer to the parent material, which is also confirmed by the respective coke analysis. (C) 2011 Elsevier B.V. All rights reserved.

Estudo das alterações no comportamento catalítico do zeólito MCM-22 por modificação controlada da porosidade

Este trabalho experimental teve como objetivo o estudo da influência dos tratamentos de dessilicação e combinação do tratamento alcalino seguido de tratamento ácido aplicado ao zeólito MCM-22, utilizando duas concentrações diferentes de solução de NaOH. O zeólito MCM-22 sintetizado e todas as amostras modificadas foram caraterizadas por difração de raios-X, RMN de 29Si e 27Al, SEM, TEM e adsorção de azoto a baixa temperatura. O estudo da acidez das amostras foi realizado por adsorção de piridina seguida de espetroscopia de infravermelho e análise da região dos grupos hidroxilo. Para avaliar a influência dos tratamentos pós-síntese na acidez e porosidade recorreu-se à reação catalítica modelo de isomerização de m-xileno. O desenvolvimento de mesoporosidade foi conseguido por meio de tratamento alcalino com a solução de NaOH de 0,05 M, não tendo sido obtido nenhum ganho adicional com o uso da solução de concentração 0,1 M. Observa-se contudo que nestas condições experimentais a extração de Si é realizada juntamente com a de Al da rede que fica depositado, como espécies extra-rede. As amostras submetidas aos tratamentos alcalino e ácido sequenciais apresentam comportamentos distintos. Quando foi usada a solução alcalina de menor concentração não se observou nenhum efeito relevante nas propriedades texturais. Pelo contrário, quando o tratamento ácido foi realizado sobre a estrutura mais fragilizada, devido à dessilicação com a solução alcalina mais concentrada, a extração de Al a partir de ambos os sistemas porosos internos promoveu a sua interligação, evoluindo-se de uma estrutura 2-D para uma estrutura 3-D. Por outro lado, a deposição contínua de espécies de Al extra-rede no interior dos poros leva a um aumento de seletividade de forma, que se traduz na formação preferencial do isómero de xileno mais importante a nível comercial, o p-xileno.

Optical Transducers Based on Amorphous Si/SiC Photodiodes

Amorphous Si/SiC photodiodes working as photo-sensing or wavelength sensitive devices have been widely studied. In this paper single and stacked a-SiC:H p-i-n devices, in different geometries and configurations, are reviewed. Several readout techniques, depending on the desired applications (image sensor, color sensor, wavelength division multiplexer/demultiplexer device) are proposed. Physical models are presented and supported by electrical and numerical simulations of the output characteristics of the sensors.

Photodiode with nanocrystalline Si/amorphous Si absorber bilayer

This letter reports a near-ultraviolet/visible/near-infrared n(+)-n-i-delta(i)-p photodiode with an absorber comprising a nanocrystalline silicon n layer and a hydrogenated amorphous silicon i layer. Device modeling reveals that the dominant source of reverse dark current is deep defect states in the n layer, and its magnitude is controlled by the i layer thickness. The photodiode with the 900/400 nm thick n-i layers exhibits a reverse dark current density of 3nA/cm(2) at -1V. Donor concentration and diffusion length of holes in the n layer are estimated from the capacitance-voltage characteristics and from the bias dependence of long-wavelength response, respectively. (C) 2011 American Institute of Physics. [doi: 10.1063/1.3660725]

Ruthenium(II) Arene Complexes Bearing Tris(pyrazolyl)methanesulfonate Capping Ligands.Electrochemistry, Spectroscopic, and X-ray Structural Characterization

Novel [Ru(L)(Tpms)]Cl and [Ru(L)(Tpms(Ph))]Cl complexes (L = p-cymene, benzene, or hexamethylbenzene, Tpms = tris(pyrazolyl)-methanesulfonate, Tpms(Ph) = tris(3-phenylpyrazoly)methanesulfonate) have been prepared by reaction of [Ru(L)(mu-Cl)(2)](2) with Li[Tpms] and Li[Tpms(Ph)], respectively. [Ru(p-cymene)(Tpms)]BF4 has been synthesized through a metathetic reaction of [Ru(p-cymene)(Tpms)]Cl with AgBF4. [RuCl(cod)(Tpms)] (cod = 1,5-cyclooctadiene) and [RuCl(cod)(Tpms(Ph))] are also reported, being obtained by reaction of [RuCl2(cod)(MeCN)(2)] with Li[Tpms] and Li[Tpms(Ph)], respectively. The structures of the complexes and the coordination modes of the ligands have been established by IR, NMR, and single-crystal X-ray diffraction (for [RuL(Tpms)]X (L = p-cymene or HMB, X = Cl; L = p-cymene, X = BF4)) studies. Electrochemical studies showed that each complex undergoes a single-electron R-II -> R-III oxidation at a potential measured by cyclic voltammetry, allowing to compare the electron-donor characters of the tris(pyrazolyl)methanesulfonate and arene ligands, and to estimate, for the first time, the values of the Lever E-L ligand parameter for Tmps(Ph), HMB, and cod.

Avaliação da caracterização de lesões em mamografia com recurso a sistemas CAD (Diagnóstico Assistido por Computador)

Mestrado em Radiações Aplicadas às Tecnologias da Saúde. Área de especialização: Imagem Digital com Radiação X.

Safety high accuracy Context-Aware Matrix (CAM) making based on X.509 proxy certificate

Human Computer Interaction (HCl) is to interaction between computers and each person. And context-aware (CA) is very important one of HCI composition. In particular, if there are sequential or continuous tasks between users and devices, among users, and among devices etc, it is important to decide the next action using right CA. And to take perfect decision we have to get together all CA into a structure. We define that structure is Context-Aware Matrix (CAM) in this article. However to make exact decision is too hard for some problems like low accuracy, overhead and bad context by attacker etc. Many researcher has been studying to solve these problems. Moreover, still it has weak point HCI using in safety. In this Article, we propose CAM making include best selecting Server in each area. As a result, moving users could be taken the best way.