Estudo da influência do lineamento Tibagi e Sinclinal de Torres na estruturação da porção norte da bacia de Pelotas

The area of this work is located along the Northern portion of the Pelotas´s basin. The onshore region extends from the Southern portion São Paulo State to the North of Rio Grande do Sul State, with a total area of 440 530 km ². The objective of the research is to characterize the main geological structures of the outcropping basement in the Paraná Basin and its correlation with the offshore portion of the Pelotas Basin. The characterization was performed through the integration of surface (SRTM images and outcrops) and subsurface data (seismic data and well logs), the method includes the use of remote sensing techniques and seismic interpretation. The main structures to be analyzed are the Tibagi Lineament and the “Torres Syncline in order to verify its influence on the geological evolution and deformation of the basin. As result, it was identified the continuity of the both structures inside the offshore basin (Pelotas Basin); but only the Tibagi Lineament represents an important structural feature in the offshore basin. In this sense, the Tibagi lineament shows a NW-SE direction along the both basins (Pelotas and Paraná) and it is defined by drainages and relief on the continental portion. It was classified as a graben structure limited by normal faults and it also was verified a trend of faults inside the lineament that cuts all the sedimentary package of Itararé Group from Paraná Basin. The Torres syncline is a structure that connects the arches of Ponta Grossa and Rio Grande, showing NW-SE orientation and a low angle dip in the NW direction. Its projection into the Pelotas Basin was not recognized by the methods applied in this work, because a preliminary analyze indicates that its projection corresponds to a structural high inside the Pelotas Basin

Caracterização petrográfica dos alvos Hidrotermalitos Norte e Sul, Suruca e porção NW da Mina de Chapada - Alto Horizonte, GO

Main occurrence of Cu-Au in Goias Magmatic Arc, the Chapada mine fits into the geological context of the Brasilia Fold Belt, specifically in the Mara Rosa Magmatic Arc. Four targets, named Hidrotermalito Norte and Sul, NW Chapada Mine Portion and Suruca, are situated in this context, which includes ortogneisses and rocks from the Mara Rosa volcanic-sedimentary sequence. All these targets have been studied due to the possibility of presenting a great potential in Cu-Au, as well as the Chapada mine. Hidrotermalitos Norte and Sul targets presents four lithological sequences, which were identified as: quartz-muscovite schist; muscovite quartzites and kyanite quartzites; quartz-biotite-amphibole schist with pyrite and epidote-amphibole-biotite gneisses with muscovite; muscovite-biotite gneisses. They are metamorphosed to amphibolites facies and retrogressive greenschist facies. Sulfetation represented mainly by pyrite. In the NW Chapada Mine Portion, three main lithological groups were identified and classified as biotite gneisses; honblende-quartz-biotite-schist; amphibolites, with the first group metamorphosed in greenschist facies (low grade), and the other two groups metamorphosed in amphibolites facies, with subsequent retrogressive metamorphism in greenschist facies. Sulfetation is represented by chalcopyrite and pyrite. Finally, also three main lithological groups were identified in the Suruca target, classified as garnet-chlorite-epidote-eiotite gneiss; biotite gneiss and chlorite-biotite gneiss with epidote and muscovite; muscovite-quartz schist, all them metamorphised in amphibolites, with retrometamorphism in greenschist facies. Sulfetation represented by pyrite and sphalerite

Simulação numérica de fluxo de águas subterrâneas na bacia do Rio Grande (BA)

The Urucuia Aquifer System represents a strategic water source in western Bahia. Its baseflow is responsible for the flow rate of the main tributaries of São Francisco river left bank in the dry season, including the Rio Grande, its main tributary in Bahia state. This river has a hydrological regime heavily affected by groundwater and is located in a region with conflicts about water resources. The aquifers geology is constituted by neocretacious sandstones of Urucuia Group subdivided in Posse Formation and Serra das Araras Formation. The embasement is formed by neoproterozoic rocks of Bambuí Group. This work focuses on an important tool application, the mathematical model, whose function is represent approximately and suitably the reality so that can assist in different scenarios simulations and make predictions. Many studies developed in this basin provided the conceptual model basis including a full free aquifer, lithological and hydraulical homogeneity in entire basin, null flux at plateau borders and aquifer base. The finite element method is the numerical method used and FEFLOW the computational algorithm. The simulated area was discretized in a single layer with 27.357,6 km² (314.432 elements and 320.452 nodes) totaling a 4.249,89 km³ volume. Were utilized 21 observation wells from CERB to calibrate the model. The terrain topography was obtained by SRTM data and the impermeable base was generated by interpolation of descriptive profiles from wells and electric vertical drilling from previous studies. Works in this area obtained mean recharge rates varying approximately from 20% to 25% of average precipitation, thus the values of model recharge zones varying in this range. Were distributed 4 hydraulic conductivity zones: (K1) west zone with K=6x10-5 m/s; (K2) center-east zone with K=3x10-4 m/s; (K3) far east zone with K=5x10-4 m/s; e (K4) east-north zone with K=1x10-5 m/s. Thereby was incorporated to the final conceptual model...

Interpretação tectono-estratigráfica do reservatório Quissamã (Eo-meso-albiano) nos campos de Pampo, Bicudo e Bonito, Bacia de Campos

Hydrocarbon accumulations occur in marine carbonate reservoirs of Quissamã Formation (early to midlle Albian), southwest Campos Basin. We investigated Pampo, Bicudo and Bonito fields, in order to understand the tectono-structural framework of oncolite/bioclast coarse-grained calcarenite reservoir and the calcilutite-marl-shale sealing interval (Late Albian to Turonian). The database of eleven wells from those fields allowed to elaborate structural sections correlating the Macaé Group – both Quissamã reservoir and Outeiro seal, the latter corresponding to the tectonic deepening phase of basin evolution. Based on density and electric logs, it was prepared structural sections of the carbonate reservoirs with consequent identification of porous zones and oil-water contacts. An extensive 3-D seismic database (~300 Km2) allowed to map three reflectors which represent the limiting units of Macaé Group

Caracterização metamórfica do Greenstone Belt de Guarinos - GO

The study area comprises Guarinos Greenstone Belt which is located in the centralwest state of Goias and has an approximate size of 280 km2. The present work has as main objective to characterize the metamorphism of the greenstone belt and the relationship between the tectonic events and the metamorphism. For the execution of the work we used data collected in the course Geological Mapping of Crystalline Area of the geology course of UNESP, classes 2009 and 2010, the data collected by Alex Choupina Joaquim Andrade Silva in his master's thesis and the information collected in field in the study area. This compilation of data allows approximately 200 thin sections have been evaluated and allowed the construction of the metamorphic map in scale 1:125.000, also allowed the preparation of the geological map in scale 1:125.000 greestone belt, based on 1:25.000 scale maps performed by students of UNESP and the mapping conducted by Silva (2011). The study area was divided into two tectonic compartments depending on the Shear Zone Engenho Velho that longitudinally crosses study area, with direction approximately NW-SE. The west compartment is bordered by granite-gneiss complex and the east compartment, seems thicker to the south and narrows gradually towards the north and its structure is seen in general as a great monoclinal with NW-SE direction with trim to SW, this way your stack was considered as a package of rocks at the base and metaultramafic metamafic the top, with a second package in tectonic contact, which is composed of detrital and chemical metasedimentary rocks. The east compartment is represented by the intrusion of a large granitic body surrounded by amphibolites and metasediments, is bounded on the east by a granite-gneiss complexes through thrust fault, and is bounded on the west by the other compartment. The structure of the compartment is seen as a major axis oriented roughly... (Completo abstract click electronic access below)

Análise de dados pedogeoquímicos de multielementos visando o refinamento de mapeamento geológico de detalhe em alvos de Pb-Zn nos municípios de Adrianópolis, Cerro Azul e Tunas do Paraná (Vale do Ribeira, PR)

In order to to research, the region of Perau, base metal mineralization, Grupo Votorantim Metals conducted a soil sampling on targets predetermined holding its chemical analysis. These reviews have been provided by the company for this work was to evaluate the potential use of these data pedogeochemical multi-element for refinement of the work of geological mapping. We selected six targets: Varginha, Salvador, Guararema Taquara Lisa and Coffin of Mendes, in the municipalities of Adrianople, Cerro Azul and Tunas do Paraná, located in Vale do Ribeira (PR). Both have about 10 km2 and situated in the geological context of the Fold Belt Terrane and the Massif de Joinville. The main rock types are present metasedimentary rocks of low to medium grade metamorphic, interspersed the amphibolites ortoderivados, both belonging to the Complex Perau, gneisses and migmatitic Complex. Applied to the geochemical data descriptive statistical techniques (variogram, kriging and histogram). From the correlation between the distributions of elements with the geological data, we could assess the potential of the proposed methodology.

Fácies, diagênese e arquitetura estratigráfica de reservatórios deltaico-lacustres da fase rifte (formação pendência), campo Serraria da Bacia Potiguar

Of the four lacustrine deltaic models, which were found in the Pendência formation, two are represented in the Serraria field. Respectively the deltaic models 1 and 3 shows the reservoir zones A and B. The Zone A is divided into six sub-areas. Each is representing a smaller cycle of development of sigmoidal lobes of deltaic front. Zone B produces in reservoirs of Model 3, or so called Full delta. The Zone B is formed by overlapping the deltaic plain system over the deltaic/prodeltaic front (model 1). This work uses the method of zooming with the aim to contextualize the geometric aspects of the sand bodies, highlighting the analysis of facies and diagenesis with help of pictures and testimonies of thin sections. The sigmoidal lobes of Zone A are fine to very fine sandstones, well sorted, with a arcosian composition.;practically with a weak compaction and cementation of a kind of film of clay (if very fine) and overgrowth feldspar (fine texture). This silicate phases are succeeded by cementation of poiquilotópica calcite, and after this a stage of dissolution, containing only regular permoporosity for this reservoir. Zone B has a combination of two types of deltaic plain reservoir. One is the rarest of distributary channel and the other the most common of lobes of crevasse. In the channel coarse to medium-grained and poor to moderate sorted sandstones are formed (tuning up), and with a lytic arcosiana nature. Rarely there are cements, including growth of feldspar and rhombohedral dolomite, which prevent a high permoporosity of the reservoir. In the crevasse lobes, the sandstones are laminated, fine and well sorted, arkosic, rarely with overgrowth feldspar and calcite poiquilotópica, and with a good intergranular permoporosity

Caracterização geológica da terminação norte do Domo de Ambrósio - Bahia

The Ambrósio dome is a granodioritic batholiths of elliptical geometry, 40km length in the N-S direction and variable width of up to 8 km, has a weakly deformed nucleus with intensely deformed margins, in its northern portion is intruded in orthogneiss that belong to the Archean basement, and its southern part comes in direct contact with the volcano-sedimentary sequence of Paleoproterozoic Rio Itapicuru Greenstone Belt (RIGB), Bahia. From geological mapping on 1:25:000 scale were recognized two structural domains, termed West Domain and East Domain. From investigation of these domains was identified a major shear zone, which puts in contact two distinct stratigraphic sequences, one west, consisting primarily of metavulcanic and metapyroclastic rocks with records of low-grade regional metamorphism, and east discontinuity a metassedimentary domain, with record of gradational contact metamorphism, deformation and compression generated from the rise of Ambrosio Pluton. Such records put into question the structural and stratigraphic models in the literature so far

Estudo da inflexão da Serra do Garrote e sua influência na zona de falha de Vazante (MG)

The Vazante Fault Zone (VFZ), located northwestward of Minas Gerais, host the largest zinc deposit known in the Brazilian territory. This structure is hosted in Vazante’s Group rocks, a metassedimentary sequence of marine environment. Near Vazante is situated the south end of the VFZ. To the west, occur the Serra do Garrote inflexion, characterized by a curvature in the contact of Formations Serra do Garrote and Serra do Poço Verde. This structure is through the analysis of aerial imagery of the region and represented in the published geological maps. The objective of this work is to understand what causes this inflexion and determine whether it affects the VZF, causing a shift in the same, and possibly, in the mineralization as well. To this end, it was done a mapping work in the region covering the Serra do Garrote inflexion and the south end of the VFZ, in 1:25.000 scale, supplemented by petrographic description of thin section and geologic sections, with cooperated to the understanding of the structural evolution of the region. Data analysis allowed the identification of six deformation phases. The D1 an D2 phases generated the main foliation. The D3 phase generate kink bands folds, with NS axis and vertical axial plane. The fourth phase is responsible for generating the Vazante Fault Zone. The fifth phase produces low angle folds and shear zones, subparallel to S1//S2. The last phase generates folds with NW axis and vertical axial plane, with causes the inflection of lithologic contactas. Field observations also make possible the conclusion that the Vazante Fault Zone presents a south continuation, which is affected by deformation associated to D6 phase attributing to the trace of the VFZ a curved geometry, similar to that exhibited by lithologic contacts between units of the map

Caracterização petrográfica das zonas de alteração hidrotermais no alvo Arex, do depósito polimetálico de Aripuanã, MT

The Roosevelt-Domain Aripuanã that by Filho et al 2004 is characterized by a metavolcanic sedimentary sequence, containing acidic to interemediary metavolcanic rocks and clastic and chemical sediments, deformed and metamorphosed at low grade, with U-Pb age of 1.743 +- 4 Ma, (by Granito Zé do Torno), and circumscribed bodies of granites late to post-orogenic (Aripuanã)...

Aplicação do método AHP para hierarquização de condicionantes de corrida de massa

Among the flow, the flows have the highest destructive potential, may cause disasters with a very high number of victims, as recorded in the events Caraguatatuba (SP) and the Serra das Araras (RJ) in 1967; Valeu do Rio Figueira, in Timbé do Sul (SC) between 1995 and 1996; Vale do Itajaí in Santa Catarina, in 2008, Teresópolis, Petrópolis and Nova Friburgo (RJ), in December 2010 and January 2011. This project aimed to prioritize the main determinants of inducing processes of debris flows by applying the method of decision making AHP (Analytical Hierarch Process). Therefore, the following stages of work were defined: research of the major factors of debris flows, questionnaire design method for application of AHP expert on the subject, analysis of the results obtained from calculating the ratio of consistency and preparation of proposal for hierarchical of conditions for debris flows. From the surveys it was possible to establish a relationship of conditions according to the scale of work, defining three levels: regional (1:250,000 to 1:100,000), Semi-Detail (1:50,000 to 1:25,000) and Detail (1: 10,000 or higher). The factors found were: concentration time, the flood wave, rain, landslide susceptibility (slope), drainage and development in the deposition. The project analyzed the results obtained from the questionnaires, which allowed the ranking of the constraints, contributing to weight constraints in studies of multicriteria mapping of susceptibility to the occurrence of debris flows. The study showed that the most of the analyzed datas were inconsistent because of the different opinion of the judges

Simulação numérica de fluxo de águas subterrâneas na fazenda Cara Preta - Santa Rita do Passa Quatro - SP

The term model refers to any representation of a real system. The use of models in Hydrogeology can be valuable predictive tools for management of groundwater resources. The numeric models of groundwater flow, object of this study, consist on a set of differential equations that describe the water flow in the porous medium. In this context, numeric simulations were made for a sub-basin located at Cara Preta farm – Santa Rita do Passa Quatro – SP. The aquifer at the local is composed by rocks of Pirambóia Formation, which is part of Guarani Aquifer System. It was developed a conceptual model from previous studies in the area, and from that, simulations were made through the software Visual Modflow®. The conceptual model established previously was considered consistent through the results of simulation.

Avaliação das taxas de erosão química e física na bacia hidrográfica do Ribeirão Jacutinga (SP)

Currently with the growing technological advancement and global, new areas are being devastated, and as a result, the erosion became more frequent causing loss of soil, infiltration capacity of the surface and weathering of rocks. In this way, environmental studies are increasingly frequent to understand the environment in which we live, but also to avoid any degradation of the same and of finite natural resources, which are essential for human life. From this, this work has as main goal, analyzing the rates of chemical and mechanical erosive watershed of Ribeirão Jacutinga, at its mouth, in the city of Rio Claro, supporting environmental studies and sustainable development today. Order to reach these values were measured and total dissolved solids in suspension in the stream during the months from January to July 2012. As results included higher rates of both physical and chemical weathering in the rainy months, especially january

Geologia do platô N6 - província mineral de Carajás (SP)

The N6 Plateau presents an iron-ore occurence in Carajás Mineral Province, standing near to actually operating deposits. Geological mapping in 1:10,000 scale and integration of geochemical, geophysical, petrography and drilling turns possible interpretation of his geological evolution. The mapped area has lithotypes from Archean Grão Pará Group, comprising very lowgrade metamorphic basic rocks and iron formation and an Proterozoic sedimentary association of conglomeratic sandstones called as Caninana Unity. The structural geology in given by a regional scale homoclinal, where the Grão Pará Group strata dips towards SW, as a part of the Northern Limb of the Carajás Fold. Subsequent deformation associated to the installation of the Carajás Shear Zone presents as E-W fold axis. Geochemical evidence permits to consider de Parauapebas Formation as the rocks which has been hydrothermally-altered to outsourcing fluids responsible to deposition of iron formations in the oceanic system, including different signatures which can be interpreted as possible sub-embayments in the Carajás Basin. The iron ore in the area occurs in subsurface as very fine friable hematite generated by supergenous enrichment of the iron formation. The conceived geologic model differs from the current academic proposal on the fact that hydrothermal alteration has been involved on the jaspelite enrichment. Metamorphism on the Parauapebas Formation presents paragenesis considered as ocean-floor metamorphism which precedes de deformation insofar as the rocks show no tectonic fabric referring to shallow crust evolution. Geophysical methods such as magnetometry and gravimetry presents excellent results for structural interpretation in uneven exposed terrain

Caracterização dos reservatórios do grupo Macaé no Campo de Garoupa - Bacia de Campos - por meio de interpretação sísmica e perfis de poço

The study area is the Garoupa Field, located 75 km from the coast of Rio de Janeiro in bathymetric elevation of 125 m and it is the first important offshore discovery of the Campos Basin with hydrocarbon production in the Albian carbonates. The high significance of carbonate rock reservoirs for the global oil industry and its degree of complexity, combined with the fact that the Garoupa Field is a mature field, make this research project interesting to develop a re-exploratory vision of the study area. The objective of this paper is to characterize the physical properties of the Macae Group reservoirs in the Garoupa Field through well correlation techniques, petrophysical analysis and seismic interpretation (3D), in order to evaluate qualitatively and quantitatively the response of geophysical data to the presence of carbonate rock reservoirs. From the analysis of well profiles (gamma ray, resistivity, density and sonic) it was possible to identify six reservoir levels in the Quissamã Formation. As a result, the reservoirs have good correlation between the wells in the Garoupa Field and show lateral facies variation. In the seismic interpretation, structural contour maps were generated in time (ms) from the top of the Macae Group and two horizons that correspond to the reservoir levels. These maps show that the oil producing area of this field is a structural high located at the west of the interpreted seismic cube, and it was classified as a rollover limited by lateral faults forming a horst. The seismic attribute maps show a good response to the reservoirs of the Garoupa Field because they are associated with amplitude anomalies, verified by the correlation between the physical properties of the reservoir rock and seismic data through cross plots, with emphasis in a linear correlation between the resistivity profile and the values of Maximum Absolute Amplitude and RMS Amplitude attributes