Zirconia in dentistry

The above factors emphasize the scope of this thesis for further investigations on zirconia, the improvement of all-ceramic zirconia restorations, and especially the interaction of zirconia and veneering and its influence on the performance of the whole restoration. The introduction, chapter 1, gave a literature overview on zirconia ceramics. In chapter 2, the objective of the study was to evaluate the effect of abrading before and after sintering using alumina-based abrasives on the surface of yttria-tetragonal zirconia polycrystals. Particular attention was paid to the amount of surface stress–assisted phase transformation (tetragonal→monoclinic) and the presence of microcracks. Chapter 3 is based on the idea that the conventional sintering techniques for zirconia based materials, which are commonly used in dental reconstruction, may not provide a uniform heating, with consequent generation of microstructural flaws in the final component. As a consequence of the sintering system, using microwave heating, may represent a viable alternative. The purpose of the study was to compare the dimensional variations and physical and microstructural characteristics of commercial zirconia (Y-TZP), used as a dental restoration material, sintered in conventional and microwave furnaces. Chapter 4 described the effect of sandblasting before and after sintering on the surface roughness of zirconia and the microtensile bond strength of a pressable veneering ceramic to zirconia.

Catalysts and processes for next-generation H2 production

The present study is focused on the development of new VIII group metal on CeO2 – ZrO2 (CZO) catalyst to be used in reforming reaction for syngas production. The catalyst are tested in the oxyreforming process, extensively studied by Barbera [44] in a new multistep process configuration, with intermediate H2 membrane separation, that can be carried out at lower temperature (750°C) with respect the reforming processes (900 – 1000°C). In spite of the milder temperatures, the oxy-reforming conditions (S/C = 0.7; O2/C = 0.21) remain critical regarding the deactivation problems mainly deriving from thermal sintering and carbon formation phenomena. The combination of the high thermal stability characterizing the ZrO2, with the CeO2 redox properties, allows the formation of stable mixed oxide system with high oxygen mobility. This feature can be exploited in order to contrast the carbon deposition on the active metal surface through the oxidation of the carbon by means of the mobile oxygen atoms available at the surface of the CZO support. Ce0.5Zr0.5O2 is the phase claimed to have the highest oxygen mobility but its formation is difficult through classical synthesis (co-precipitation), hence a water-in-oil microemulsion method is, widely studied and characterized. Two methods (IWI and bulk) for the insertion of the active metal (Rh, Ru, Ni) are followed and their effects, mainly related to the metal stability and dispersion on the support, are discussed, correlating the characterization with the catalytic activity. Different parameters (calcination and reduction temperatures) are tuned to obtain the best catalytic system both in terms of activity and stability. Interesting results are obtained with impregnated and bulk catalysts, the latter representing a new class of catalysts. The best catalysts are also tested in a low temperature (350 – 500°C) steam reforming process and preliminary tests with H2 membrane separation have been also carried out.

Simulation Guided Navigation in cranio-maxillo-facial surgery: a new approach to improve intraoperative three-dimensional accuracy and reproducibility during surgery.

The aim of this PhD thesis " Simulation Guided Navigation in cranio- maxillo- facial surgery : a new approach to Improve intraoperative three-dimensional accuracy and reproducibility during surgery ." was at the center of its attention the various applications of a method introduced by our School in 2010 and has as its theme the increase of interest of reproducibility of surgical programs through methods that in whole or in part are using intraoperative navigation. It was introduced in Orthognathic Surgery Validation a new method for the interventions carried out according to the method Simulation Guided Navigation in facial deformities ; was then analyzed the method of three-dimensional control of the osteotomies through the use of templates and cutting of plates using the method precontoured CAD -CAM and laser sintering . It was finally proceeded to introduce the method of piezonavigated surgery in the various branches of maxillofacial surgery . These studies have been subjected to validation processes and the results are presented .

Wet chemistry synthesis towards nanostructures of thermoelectric antimonides

Die vorliegende Arbeit befasst sich mit der Synthese von nanostrukturierten Antimoniden, wobei die folgenden beiden Themen bearbeitet wurden: rnAus chemischer Sicht wurden neue Synthesewege entwickelt, um Nanopartikel der Verbindungen in den binären Systemen Zn-Sb und Fe-Sb herzustellen (Zn4Sb3, ZnSb, FeSb2, Fe1+xSb). Anders als in konventionellen Festkörperreaktionen, die auf die Synthese von Bulk-Materialien oder Einkristallen zielen, muss die Synthese von Nanopartikeln Agglomerate und Ostwald-Wachstum vermeiden. Daher benötigen annehmbare Reaktionszeiten und vergleichsweise tiefe Reaktionstemperaturen kurze Diffusionswege und tiefe Aktivierungsbarrieren. Demzufolge bedient sich die Synthese der Reaktion von Antimon-Nanopartikeln und geeigneten molekularen oder nanopartikulären Edukten der entsprechenden Übergangsmetalle. Zusätzlich wurden anisotrope ZnSb Strukturen synthetisiert, indem eine Templat-Synthese mit Hilfe von anodisierten Aluminiumoxid- oder Polycarbonat-Membranen angewandt wurde. rnDie erhaltenen Produkte wurden hauptsächlich durch Röntgen-Diffraktion und Elektronenmikroskopie untersucht. Die Auswertung der Pulver Röntgendiffraktions-Daten stellte eine Herausforderung dar, da die Nanostrukturierung und die Anwesenheit von mehreren Phasen zu verbreiterten und überlagernden Reflexen führen. Zusätzliche Fe-Mößbauer Messungen wurden im Falle der Fe-Sb Produkte vorgenommen, um detailliertere Informationen über die genaue Zusammensetzung zu erhalten. Die erstmals hergestellte Phase Zn1+xSb wurde einer detaillierten Kristallstrukturanalyse unterzogen, die mit Hilfe einer neuen Diffraktionsmethode, der automatisierten Elektronen Diffraktions Tomographie, durchgeführt wurde.rnrnAus physikalischer Sicht sind Zn4Sb3, ZnSb und FeSb2 interessante thermoelektrische Materialien, die aufgrund ihrer Fähigkeit thermische in elektrische Energie umzuwandeln, großes Interesse geweckt haben. Nanostrukturierte thermoelektrische Materialien zeigen dabei eine höhere Umwandlungseffizienz zu erhöhen, da deren thermische Leitfähigkeit herabgesetzt ist. Da thermoelektrische Bauteile aus dichten Bulk-Materialien gefertigt werden, spielte die Verfestigung der synthetisierten nanopartikulären Pulver eine große Rolle. Die als „Spark Plasma Sintering“ bezeichnete Methode wurde eingesetzt, um die Proben zu pressen. Dies ermöglicht schnelles Heizen und Abkühlen der Probe und kann so das bei klassischen Heißpress-Methoden unvermeidliche Kristallitwachstum verringern. Die optimalen Bedingungen für das Spark Plasma Sintern zu finden, ist Inhalt von bestehender und weiterführender Forschung. rnEin Problem stellt die Stabilität der Proben während des Sinterns dar. Trotz des schnellen Pressens wurde eine teilweise Zersetzung im Falle des Zn1+xSb beobachtet, wie mit Hilfe von Synchrotrondiffraktionsuntersuchungen aufgedeckt wurde. Morphologie und Dichte der verschiedenen verfestigten Materialien wurden mittels Rasterelektronenmikroskopie und Lasermikroskopie bestimmt. Die Gitterdynamik wurde mit Hilfe von Wärmekapazitätsmessungen- und inelastischer Kern-Streuung untersucht. Die Wärmeleitfähigkeit der nanostrukturierten Materialien ist im Vergleich zu den Festkörpern ist drastisch reduziert - im Falle des FeSb2 um mehr als zwei Größenordnungen. Abhängig von der Zusammensetzung und mechanischen Härte wurden für einen Teil der verfestigten Nanomaterialien die thermoelektrische Eigenschaften, wie Seebeck Koeffizient, elektrische und Wärmeleitfähigkeit, gemessen.rn

Allestimento di modello sperimentale su animali di tessuto osseo ingegnerizzato

Questo studio ha valutato l'efficacia di un approccio rigenerativo utilizzando cellule staminali mesenchimali (MSC) e uno scaffold di idrossiapatite pura e porosa (HA) progettata con tecnologia CAD-CAM per sostituire il condilo dell'articolazione temporomandibolare (ATM). Metodi.Uno scaffolds di HA con porosità totale del 70% è stato prototipato per sostituire i due condili temporomandibolari (sinistro e destro) dello stesso animale. MSC sono state ottenute dalla cresta iliaca ed espanse in coltura. Guide chirurgiche su misura sono state create e utilizzate per esportare la pianificazione virtuale delle linee di taglio dell'osso nell'ambiente chirurgico. Sei pecore sono state sacrificate a 4 mesi dopo l'intervento.Gli scaffold sono stati espiantati, campioni istologici sono stati preparati, ed è stata eseguota l'analisi istomorfometrica. Risultati.L'analisi della riduzione di porosità per apposizione di osso neoformato mostrata una differenza statisticamente significativa tra la formazione ossea nei condili carichi di MSC rispetto ai condili senza (

Smart magnetic dispersions - from switchable release to well-defined hybrid nanofibers

The synthesis, characterization and application of aqueous dispersions of superparamagnetic/polymer hybrid nanoparticles and capsules is described. Implementation of the superparamagnetic moiety into the polymer matrix enables a response of the nanomaterials towards an external magnetic field. Application of the external field is used for two main purposes: i) As heat generator, when an alternating magnetic field is applied. ii) As structuring agent to self-assemble superparamagnetic nanoparticles in the external field.rnIn the first part, superparamagnetic nanoparticles were used as heat generators in order to achieve a magnetic field induced release of an active compound from nanocontainers. To achieve such a release in remote-controlled fashion, the encapsulation of superparamagnetic nanoparticles into polymer nanocapsules was combined with the integration of a thermolabile compound into the shell of the nanocontainers. The magnetic nanoparticles acted as generators for heat, which decomposed the thermolabile compound. Pores were created in the degrading shell and an active substance was released.rn Additionally, the self-assembly of polymer nanoparticles, which were labeled with a superparamagnetic moiety as structuring agent, could be demonstrated. A combination of a magnetic field induced self-assembly and a sintering of neighboring particles upon an increase in temperature above the glass transition temperature of the polymer was used to form stable architectures. Various structures with tunable periodicity could be obtained ranging from smooth linear nanofibers to zigzag fibers. Besides solely creating linear architectures, the frugal process additionally allowed the creation of arrangements in analogy to more complex polymer architectures: By the introduction of defined junction points, the generation of branched structures and networks was demonstrated. Additionally, by tailoring the interaction of differently sized particles, the preparation of nanoparticle arrangements in statistical or block copolymer fashion was shown. Moreover, a reversible linear assembly and linkage of the nanoparticles was demonstrated following a lock/unlock mechanism. Therefore, the particles were locked in their linear assembly by a stable iron(III) hydroxamato-complex and unlocked by addition of a reducing agent and formation of a less stable iron(II)-complex.Further, in various projects with collaboration partners, nanoparticles and nanocapsules were labeled with a superparamagnetic moiety for their use as contrast agents in magnetic resonance imaging or as magnetically separable dispersions.

Heusler compounds for thermoelectric applications

The demands for energy is leading to social and political conflicts in the world. For example, the limited resources of fossil fuels causing a dependence on the oil conveying countries in the world, leading to political discords. One way to save energy is to increase the efficiency of a process. In the field of thermoelectricity waste heat is used to produce electricity, this leads to an improvement of the efficiency. Heusler compounds with C1b structure with the general formula XY Z (X, Y = transition metal, Z = main group element) are in focus of the present thermoelectric research. Their mechanical and thermal stability is exceptional in comparison to the commonly used thermoelectric materials. The possibility to substitute small amounts of elements from the parent compound without destructing the lattice structure allows tuning the electronic properties. This tunability also allows to avoid the use of toxic and expensive elements. The reported thermoelectric Heusler compounds exhibit high electrical conductivity and moderate values of the Seebeck coefficients, which lead to a high powerfactor. The disadvantage of Heusler compounds is their high thermal conductivity. Introducing mass disorder on the X-site lattice is one effective way to produce additional phonon scattering and with it to decrease the thermal conductivity. Another approach is to implement a nano or micro structure in the thermoelectric material. This can be achieved by phase separation, composite materials, pulverization with additional spark plasma sintering or by a complex lattice structure. In the first part of this work, the influence of element substitutions on the Zr0.5Hf0.5NiSn system was investigated, to obtain the knowledge on how to optimize the electronic properties of the Heusler compounds with C1b structure. In line with this, the change of the electronic structure was investigated and a possible mechanism is predicted. In the second part of this work, the phenomenon of phase separation was investigated. First, by applying a phase separation in the well-known system Co2MnSn and subsequently by systematic investiga- tions on the TixZryHfzNiSn. In the third part, the results from the previous parts before were used to produce and explain the best reported Heusler compound with C1b structure exhibiting a Figure of Merit of ZT= 1.2 at 830 K.

Thermoelektrische und strukturelle Eigenschaften gefüllter Skutterudite, sowie Verbesserung ihres Gütefaktors durch Nanostrukturierung

Gefüllte Skutterudite mit der Summenformel MxCo4Sb12 sind vielversprechende thermoelektrische Materialien. Die Standardsynthese führt jedoch oft zur Bildung von MSbx, Sb, CoSb oder CoSb2 als Nebenphasen. In dieser Arbeit wird eine neue zweistufige Synthese vorgestellt, bei der die Bildung des Kieftits (CoSb3) getrennt von dem topotaktischen Füllen mit dem Metallatom M erfolgt. Dieser Ansatz erlaubt eine Durchführung der Reaktion bei niedrigeren Temperaturen mit kürzeren Reaktionszeiten. Ein geringer Antimon-Unterschuss im so erhaltenen Kieftit erhöht die Anzahl der Ladungsträger und unterdrückt die Bildung von Verunreinigungsphasen. Zunächst wurden Skutteruditproben mit der nominellen Zusammensetzung InxCo4Sb12 mit x = 0,12; 0,15; 0,18 und 0,20 in hoher Reinheit hergestellt und mit Spark Plasma Sintering (SPS) kompaktiert. Messaufnahmen mit Potential- und Seebeck-Mikrosonde und Rasterelektronenmikroskop zeigten eine hohe Probenhomogenität. Produkte waren nahezu phasenrein, was eine Untersuchung der Transporteigenschaften ohne Verfälschung durch Nebenphasen ermöglichte. Die quantitative Phasenanalyse mittels Synchrotron-Beugungsdaten zeigte < 0,1 % InSb bei In0,18Co4Sb12 und In0,20Co4Sb12, sowie eine lineare Korrelation zwischen dem wahren Füllgrad und der Gitterkonstante. Die Bindung von < 0,1 % InSb verringerte den Füllgrad der nominellen In0,20Co4Sb12-Probe auf x = 0,144. Die nominelle In0,18Co4Sb12-Probe mit dem wahren Gehalt x = 0,160 hatte den höchsten zT-Wert nahe eins bei 420 °C. Es konnte anschließend die Anwendbarkeit der Synthesemethode für Barium- und mehrfach gefüllte (Na+In) Skutterudite gezeigt werden. Die Na-gefüllte Probe war gegenüber der thermischen Behandlung in der SPS oder der Charakterisierung instabil. Alle Verbindungen wurden gesintert und ihre Transporteigenschaften wurden charakterisiert. Des weiterem wurde der Einfluss der Konzentration der Korngrenzen bei den Mischungen von zu Nanomaßstab vermahlenem In0,18Co4Sb12 (Partikelgrößen zwischen 20 und 100 nm) mit dem ursprünglichen Bulk untersucht. Proben mit verschiedenen Anteilen von Nanopulver wurden gesintert, ihre thermoelektrischen und strukturellen Eigenschaften wurden untersucht. Die Gütezahl zT von 1,39 bei 375 °C wurde bei der Probe mit gleichen Anteilen des Nano- und des unbehandelten Pulvers erreicht. Die Komposite mit Anteilen <10 % oder >75 % des Nanopulvers zeigten keine Verbesserung gegenüber der unbehandelten Verbindung.rn

Prove a fatica su provini differentemente accresciuti a partire da polvere d'acciaio

Lo scopo della prototipazione rapida è la realizzazione di prototipi destinati alle osservazioni al fine di migliorare il progetto in via di sviluppo. Tuttavia, negli ultimi anni si sta cercando di ottenere prototipi che siano già di per sé funzionali e quindi oggetti pronti all'uso. Soprattutto per i materiali metallici, si stanno sviluppando tecniche di prototipazione che tendono a diventare veri e propri processi tecnologici di produzione: una di queste è il processo DMLS (Direct Metal Laser Sintering). La tecnologia di Sinterizzazione Laser Selettiva dei Metalli (DMLS) si realizza attraverso un processo per addizione stratificata, in cui l’utilizzo di un laser ad alta densità di energia permette di fondere metalli in polvere, creando il modello o il prototipo tridimensionale. La tecnologia DMLS risulta estremamente innovativa ed offre la possibilità di sviluppare componenti con un grado di precisione elevato e un livello di dettaglio accurato. I vantaggi di questa tecnologia sono diversi, ma il più importante è l'estrema flessibilità di progetto in quanto si eliminano i vincoli di fabbricazione dettati dalle tecniche di produzione convenzionali basate sull'asportazione di truciolo, dando così piena libertà di design al progettista. Un esempio di applicazione di questa tecnologia è la costruzione di stampi per lo stampaggio ad iniezione: per poter migliorare il ciclo di produzione (in termini di tempo e quindi di denaro) è possibile creare canali di raffreddamento interni ottimizzati con forme e traiettorie diverse dalle tradizionali rettilinee ottenute per foratura. Dunque, associando questa tecnologia con i diversi materiali disponibili in commercio, è possibile costruire manufatti altamente customizzati e performanti a seconda delle varie esigenze. L’obiettivo di questo lavoro è stato quello di stimare e confrontare il limite di fatica per vita infinita di tre serie di provini, ottenuti mediante il processo innovativo DMLS, accresciuti secondo la direzione verticale, orizzontale ed inclinata a 45°; in particolare si è voluto osservare il comportamento dei provini in quest’ultimo caso, non essendoci informazioni precise in letteratura. La polvere di metallo utilizzata per la fabbricazione dei provini è il Maraging Steel, un acciaio dalle caratteristiche meccaniche eccezionali utilizzato soprattutto nel campo aereonautico.

Caratterizzazione sperimentale dell'ossido di stronzio per l'assorbimento del diossido di carbonio da correnti gassose ad alta temperatura e considerazioni sulla sua applicazione industriale in processi CCS

Del granulato di ossido di stronzio (anche nella formula carbonato) è stato testato come nuovo possibile materiale di utilizzo per la cattura ad alta temperatura di diossido di carbonio da effluenti gassosi di scarto. Sono stati condotti diversi esperimenti con strumentazioni già preposte, quali test termogravimetrici, microscopia elettronica (SEM) e Xray (XRD). Mentre per la sperimentazione in quantità più rilevanti di materiale è stato costruito un impianto a letto fisso ex novo. Le prove TG hanno evidenziato una capacità media di sorbente parti a circa il 5% in massa di ossido, a temperature tra i 1100°C e i 1200°C, in situazione di regime (dopo numerosi cicli di carb/calc), con una buona conservazione nel tempo delle proprietà adsorbitive, mentre per le prove a letto fisso, si è registrato un calo di valori variabile tra il 3 e il 4%, con un netto miglioramento nel caso di calcinazione in vapore surriscaldato fino al 5%. Il trattamento in vapore ha sortito l’importante effetto di calcinazione del diossido di carbonio dal sorbente, quindi facilmente separabile dal flusso in uscita, misurato tramite cattura in una soluzione di idrossido di bario. Importanti fenomeni di sintering e densificazione hanno portato ad occludere completamente la camera di reazione sviluppando notevoli sovrappressioni interne. Tali fenomeni sono stati approfonditi tramite analisi SEM e XRD. Si è constatato un aumento notevole della grandezza dei granuli in caso di trattamento in vapore con la formazione di legami stabili e con conservazione della porosità. Nel caso di trattamento senza vapore surriscaldato i granuli hanno sinterizzato tramite formazione di legami, ma sempre con conservazione della macroporosità. Il lavoro di tesi è stato inquadrato nel contesto tecnologico al riguardo le tecniche CCS esistenti ed in progetto, con un attento studio bibliografico riguardo lo stato dell’arte, impianti esistenti, costi, metodi di cattura usati, metodologie di trasporto dei gas, metodologie di stoccaggio esistenti e in progetto. Si sono considerati alcuni aspetti economici per sviluppare un modello previsionale di spesa per una possibile applicazione di cattura per un impianto di produzione energetica. Con la progettazione e dimensionamento di un sistema integrato di adsorbimento tramite l’accoppiamento di 2 reattori dedicati ai cicli di carbonatazione e calcinazione del materiale sorbente. Infine si sono considerati gli aspetti salienti dello stoccaggio del diossido di carbonio in reservoir tramite le tecniche di EOR e EGR (Enhanced Oil/Gas Recovery) utilizzando la stessa CO2 come fluido spiazzante degli idrocarburi in posto. Concludendo il lavoro di tesi e di sperimentazione ha contribuito in modo tangibile allo scopo prefissato, andando a caratterizzare un nuovo materiale per la cattura di diossido di carbonio da effluenti gassosi ad alta temperatura, ed andando a verificare un’importante fenomeno rigenerativo non previsto delle capacità sorbitive dei materiali sottoposti a test.

Modeling And Predicting The Performance Of Infiltrated Solid Oxide Fuel Cell Anodes

Fuel cells are a topic of high interest in the scientific community right now because of their ability to efficiently convert chemical energy into electrical energy. This thesis is focused on solid oxide fuel cells (SOFCs) because of their fuel flexibility, and is specifically concerned with the anode properties of SOFCs. The anodes are composed of a ceramic material (yttrium stabilized zirconia, or YSZ), and conducting material. Recent research has shown that an infiltrated anode may offer better performance at a lower cost. This thesis focuses on the creation of a model of an infiltrated anode that mimics the underlying physics of the production process. Using the model, several key parameters for anode performance are considered. These are the initial volume fraction of YSZ in the slurry before sintering, the final porosity of the composite anode after sintering, and the size of the YSZ and conducting particles in the composite. The performance measures of the anode, namely percolation threshold and effective conductivity, are analyzed as a function of these important input parameters. Simple two and three-dimensional percolation models are used to determine the conditions at which the full infiltrated anode would be investigated. These more simple models showed that the aspect ratio of the anode has no effect on the threshold or effective conductivity, and that cell sizes of 303 are needed to obtain accurate conductivity values. The full model of the infiltrated anode is able to predict the performance of the SOFC anodes and it can be seen that increasing the size of the YSZ decreases the percolation threshold and increases the effective conductivity at low conductor loadings. Similar trends are seen for a decrease in final porosity and a decrease in the initial volume fraction of YSZ.

Magnesium - Tellurium by Powder Methods

Today considerable work is being done in the compressed metal powder field which is gradually ob­taining prominence as a valuable branch of metallurgy. The mass of data, however, has led to many different ideas on the results of sintering.

Powder Metallurgy

The metal powders may be produced in a number of different ways. In metals where the intercrystalline material is brittle enough, they may be ground in a ball mill or eddy mill. The fineness of such a powder is more or less controlled by the grain size of the original metal.

Measurements of the Magnetic Permeabilities of the Iron-Manganese Alloy System Prepared by the Methods of Powder Metallurgy

Powder metallurgy is a branch of metallurgy which produces metallic compacts in their final forms by means of pressure and heat-treatment from the pow­ders. The products of powder metallurgy are being used in our daily lives quite often. For example, the tungsten wires in the electric bulbs to the silver-tin fillings of our teeth.

Electrical Resistivity Measurements of Powder Metal Compacts

This work, as it was originally planned, was the arranging of an apparatus whereby electrical resistivity measurements could be made on powder compacts. It was also to include measurements on a series of copper-nickel compacts both before and after sintering.