Small relief shape variations influence spatial variability of soil chemical attributes

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influência da variabilidade espacial de atributos químicos de um latossolo na aplicação de insumos para cultura de cana-de-acúcar

As técnicas de aplicação localizada e em taxas variadas de insumos agrícolas com auxílio da geoestatística têm sido umas das áreas de concentração de esforços recentes em pesquisas e desenvolvimento ligado à agricultura de precisão. Portanto, o trabalho teve como objetivo avaliar a necessidade de aplicação de calcário e fósforo com base no comportamento espacial de atributos químicos do solo. Foram feitas amostragens do solo a intervalos regulares de 50 m, em uma área de 42 ha, na profundidade de 0,0-0,2 m para determinação do pH, Ca, Mg, P, V% e cálculo da necessidade de calagem e superfosfato triplo. Os dados foram submetidos às análises da estatística descritiva, geoestatística e interpolação por krigagem. O uso da técnica de geoestatística possibilitou uma precisa descrição dos atributos do solo o que permitiu a definição de zonas de manejo, indicando os locais de ocorrência de déficit e excesso. A variabilidade espacial dos atributos químicos do solo, possibilita a recomendação de doses de calcário e fósforo com taxas variadas, proporcionando economia e maior eficiência na aplicação.

Superfícies geomórficas e atributos de Latossolos em uma seqüência Arenítico-Basáltica da região de Jaboticabal (SP)

Em um segmento de vertente com substrato de arenito em contato com basalto, regionalmente muito freqüente, pretendeu-se não só relacionar as superfícies geomórficas com os atributos físicos, químicos e mineralógicos dos Latossolos nelas encontrados, mas também testar métodos geoestatísticos para localização de limites dessas superfícies. Usando critérios geomorfológicos, três superfícies foram identificadas e topograficamente caracterizadas. Os solos foram amostrados, a intervalos regulares de 25 m, na profundidade de 0,6 a 0,8 m (topo do horizonte B), em uma transeção de 1.700 m perfazendo 109 pontos. Nas amostras, foram analisados: densidade de partículas, granulometria, CTC do solo, CTC da argila, Fe total da argila (ataque por H2SO4) e óxidos de Fe livres (por dissolução seletiva). A fração argila desferrificada foi analisada por difração de raios X. Com base na estratigrafia e variações do relevo local, foram identificadas e diferenciadas, no campo, três superfícies geomórficas. Analisaram-se também o perfil altimétrico e o modelo de elevação digital do terreno. Observou-se que as três diferentes superfícies estão bem relacionadas com os atributos físicos, químicos e mineralógicos dos seus respectivos solos. Na parte inferior desta vertente, superfície mais recente e sobre basalto, em Latossolo Vermelho eutroférrico típico, foram encontradas as maiores variabilidades da declividade, da argila e de Fe. As variações da inclinação do terreno, quando analisadas sistematicamente pelo split moving windows dissimilarity analysis (análise estatística de dissimilaridade, em segmentos móveis), mostraram que este método estatístico pode ser usado para ajudar a localizar os limites entre superfícies geomórficas. As variações dos solos da transeção, e arredores, mostraram-se relacionadas com idade, inclinação do terreno e litologia. O trabalho geomórfico detalhado forneceu importantes informações para subsidiar os trabalhos de levantamento de solos e de pedogênese.

Spatial relationships between soil attributes and corn yield in no-tillage system

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Autoestima e qualidade de vida de pessoas com úlcera venosa atendidas na atenção primária

Venous ulcers (VU) is a chronic injury of the lower extremities and because of its high incidence and recurrence implies long and complex treatments, damaging the quality of life (QOL) and self-esteem (SE) of the people. This study aimed to analyze the association between self-esteem with the quality of life of people with venous ulcers treated in primary care. Cross sectional analytical study with a quantitative approach conducted with 44 people met with VU at 13 primary care units 2 and Mixed units in Natal/RN. The study was approved by the Ethics Committee in Research of the Federal University of Rio Grande do Norte (UFRN), CAAE: 07556312.0.0000.5537. Held data collection from February to April 2014 and used three instruments: a structured form covering sociodemographic, health care and clinical variables, the Rosenberg Self-Esteem Scale and the SF-36. The collected data were entered into a database and processed on computerized software for descriptive and inferential analyzes. The results showed a predominance of people with UV females (65,9%), with more than 60 years (59,1%), married or in a stable relationship (52,3%), low education (86,4%) without occupation (68,2%) and less than one minimum wage income (81,8%). Regarding assistance characteristics was observed that most patients performed the dressing with appropriate material (72,7%), professional or trained caregiver (61,4%) did not use compression therapy (81,8%), treating the injury for more than 6 months (77,3%), lack of guidelines for the use of compression therapy, elevation of legs, and regular exercise (77,3%) and consulting the angiologist last year (52,3% ). Regarding clinical features of the lesion was found that most of the recurrent lesions are (77,3%), over one year of current lesion (52,3%) medium to large lesions (54,8%), without signs of infection (61,3%) and pain (79,5%). The mean SE of respondents was 9,3 (± 5,1). The relations between the SE and the sociodemographic variables, health care and clinics showed that individuals without a partner (a) (p = 0,01), who did not wear compression therapy (p = 0,04), with more 6 months of treatment (p = 0,01) and larger lesions (p = 0,01) had a lower SE. The mean domain and the dimensions of the SF-36 were lower emphasizing the functional capacity 36.5 (± 27,6) and the physical aspects of 15.3 (± 30,6). There were significant correlations between AE people with VU and the domains and dimensions of the SF-36: physical functioning (r = -0,432), general health (r = -0,415), vitality (r = -0,573), aspects social (r = -0,517), mental health (r = -0,612) and mental health dimensions (r = -0,612) and physical health (r = -0,473). Based on these results it is concluded by rejecting the null hypothesis and accept the alternative proposed in the study in which it was found that there is a negative correlation between the SE and the QOL of people with venous ulcers

Análise da adesão ao tratamento e da qualidade de vida de pessoas com úlcera venosa

The therapeutic adherence is still a big problem among people with venous ulcers (VU) because the treatment is long, expensive and demand changes in lifestyle. In this context, this study aims to examine treatment adherence and quality of life (QOL) of people with VU assisted at primary health care. This is an analytical, cross-sectional study with a quantitative approach to treatment and data analysis. The study had the scenario 13 Family Health Units and 02 Units Mixed of Natal. The target population consisted of 44 persons with UV indicated by the teams of the Family Health Strategy between February and April 2014. Three instruments were used: an instrument to characterize the sociodemographic, health and care aspects, the Multidimensional Scale of Adherence Therapy composed of the dimensions: healthy lifestyle, compressive therapy and neurovascular monitoring and the Charing Cross Venous Ulcer Questionnaire (CCVUQ) that evaluates QOL in persons with VU composed by the domains: Total Score, Social Interaction, Domestic Activities, Aesthetics and Emotional State. The study was approved by the Ethics Committee in Research of the Federal University of Rio Grande do Norte, CAAE: 07556312.0.0000.5537. The data concerning the sociodemographic characteristics showed that there was a predominance of females (65.9%), age range as of 60 years (59.1%) and income of up to 1 minimum wage (81.8%). With the characterization of health, it was evident that most people reported chronic diseases (63.6%), sleep more than 6 hours (81.8%), present pain (81.8%), denying alcoholism (86 4%) and smoking (77.3%) and showed a number greater than or equal to 1 (77.3%) recurrences. Concerning the therapeutic adherence was found that in the dimension compressive therapy there poor adherence. No associations between the domains of adherence and sociodemographic and health variables were found. Was observed, however, better adherence among individuals without pain and with higher schooling. When analyzed the averages of the dimensions of therapeutic adherence with the care characteristics there was statistical significance between: adherence to compression therapy and guidance for use of compressive therapy (p = 0.002) and guidance for regular exercise (p = 0.026). Considering the mean of total score of CCVUQ (mean 51.47, SD 18.33) it is observed that the overall QOL of respondents has approximate value of the median of the scale (50). The mean of the domain Social Interaction (mean 44.23, SD 21.38) and Domestic Activities (mean 45.70, SD 23.21) were those who reported better QOL. There were weak correlations but significant between adherence to healthy lifestyle and Domains Total Score (p = 0.012), social interaction (p-value = 0.048), Aesthetics (p-value = 0.025) and Emotional State (0.017) of CCVUQ. From the data analysis it is concluded that among people with UV, there poor adherence to compressive therapy. Furthermore, we found no statistically significant association between treatment adherence and sociodemographic and health characteristics. It is added that there was a correlation between the healthy lifestyle dimension and domains CCVUQ

Variabilidade espacial de fatores de erosão em Latossolo Vermelho eutroférrico sob cultivo de cana-de-açúcar

Visando a avaliar a variabilidade espacial de fatores de erosão em Latossolo Vermelho eutroférrico, foram obtidas amostras do solo em intervalos regulares de 50 m, em forma de grid, totalizando 206 pontos de amostragem. Foram coletadas amostras nas profundidades de 0,0-0,2 m para a determinação da composição granulométrica e do conteúdo de matéria orgânica. Os fatores de erosão locais, como erosividade (R), erodibilidade (K), relevo (LS), perda de solo (A), potencial natural de erosão (PNE), risco de erosão (RE) e expectativa de erosão (EE), foram avaliados. A variabilidade do solo medida pelo coeficiente de variação registrou-se média para K, alta para o RE e EE e muito alta para A, LS e PNE. As variáveis estudadas apresentaram estrutura de dependência espacial com grau moderado para as variáveis K, A, PNE e RE, e forte para o LS e EE. Mapas obtidos por krigagem foram apresentados para descrição dos padrões de distribuição dos fatores de erosão na paisagem.

Terrain forms and spatial variability of soil properties in an area cultivatedwith citrus

A técnica de agricultura de precisão e a relação solo-paisagem permitem delimitar áreas para o manejo localizado, o que permite a aplicação localizada de insumos agrícolas e, consequentemente, pode contribuir para a preservação de recursos naturais. Portanto, o objetivo deste trabalho foi caracterizar a variabilidade espacial das propriedades químicas e do teor de argila, no contexto da relação solo-paisagem, em um Latossolo sob cultivo de citros. Amostras de solo foram coletadas na profundidade de 0,0-0,2 m, em uma área de 83,5 ha cultivada com citros, na forma de malha, com intervalos regulares de 50 m, com 129 pontos na forma de relevo côncava e 206 pontos na forma plana, totalizando 335 pontos. Os valores obtidos para as variáveis que expressam as propriedades químicas e para o teor de argila do solo foram submetidos à análise estatística descritiva e geoestatística com a modelagem de semivariogramas para a confecção de mapas de krigagem. Os valores de alcance e mapas de krigagem indicaram maiores variabilidades na forma de relevo côncava (segmento topo), quando comparada com a forma plana (segmentos meia encosta e encosta inferior). A identificação de diferentes formas de relevo mostrou-se eficiente no entendimento da variabilidade espacial das propriedades químicas e do teor de argila do solo sob cultivo de citros.

Variabilidade espacial de atributos do solo e de fatores de erosão em diferentes pedoformas

As formas do relevo podem ser indicadores da variação dos atributos do solo, pois essa variabilidade é causada por pequenas alterações do declive que afetam os processos pedogenéticos bem como o transporte e o armazenamento de água no perfil do solo. O trabalho foi desenvolvido em Catanduva (SP), com o objetivo de caracterizar a variabilidade espacial de atributos do solo e fatores de erosão em diferentes pedoformas sob cultivo de cana-de-açúcar. de acordo com o modelo de Troeh classificou-se as formas do relevo em duas pedoformas, côncava e convexa. Com a utilização de um DGPS levantaram-se as cotas altimétricas, estabelecendo-se uma malha, com intervalos regulares de 50 m, com 270 pontos na pedoforma côncava e 353 pontos na pedoforma convexa, perfazendo um total de 623 pontos, coletados na profundidade de 0,0 - 0,2 m em uma área de 200 ha. em cada ponto da malha foram determinados os atributos químicos do solo, granulometria, espessura do solo e fatores de erosão locais, tais como erosividade (R), erodibilidade (K), fator topográfico (LS), uso e manejo (C), práticas conservacionistas (P), potencial natural de erosão (PNE), perda de solo (A) e risco de erosão (RE). Os dados foram avaliados primeiramente por uma análise estatística exploratória, calculando-se a média, mediana, variância, coeficiente de variação, coeficiente de assimetria, coeficiente de curtose e teste de normalidade. Posteriormente, a dependência espacial foi verificada por meio da técnica de geoestatística utilizando-se semivariogramas. As maiores perdas de solo, risco de erosão e potencial natural de erosão e menor espessura do solo ocorreram na pedoforma convexa, indicando forte dependência espacial com a forma do relevo. A pedoforma côncava proporcionou maior variabilidade espacial, demonstrando que a forma do relevo condiciona padrões diferenciados de variabilidade. A magnitude da variabilidade dos atributos do solo é mais influenciada pela forma do relevo que pela erosão. A espessura do horizonte A+E integrado com a forma do relevo é um indicador de processos erosivos para classe de Argissolos.

Avaliação da usabilidade de Websites de hotéis segundo as heurísticas de Nielsen: pesquisa exploratória em hotéis da Região Rordeste do Brasil

This Thesis deals with the usability in some sites of hotels placed in a specific region of Brazil. Usability is the property of a site that shows how it allows the user get all information available without a large effort and in a clear and objective way. A questionnaire was used as a tool to value, by the common user perspective, navigation, on line reservation simulation, appreciation of the available content and, by this way, an easiness in the interaction site-users. As a result, it is possible to say that, considering all material analyzed, those sites that present usability criterion are more interactive and dynamic, demonstrating an easy navigation in a users view. By other side, it was possible to note that, about heuristics used in the search, the most of the websites demonstrated a deficiency in questions as firmness, user control and how to avoid mistakes. There was still valued as deficiency by the most of users in websites the general characters and the view of user. It was presented, seeing general characters, that a big part of the websites needs tools that can make user rapidly find what looks for. It was yet possible to see that users don't believe in secret when websites ask them some information. This is a point that needs to be appreciated because it causes some insecurity during navigation

Segurança Alimentar e Controle de Qualidade: um estudo da implantação do Programa Alimentos Seguros em supermercados de bairro

This study aimed to analyze the percentage of compliance, related to the requirements of Practice, achieved by 23 supermarkets in neighborhood after the deployment of Food Insurance Program. For its development research methodology adopted was the application start and end of a check-list (tool-specific SBP) in 23 supermarkets, target of this study. After the deployment of PAS was made a comparative study where it was possible to see that these companies need to improve conditions related to food safety, because according to the study, none of the 23 supermarkets evaluated met the criteria recommended by the SBP to 100% of compliance for the items critical of the check-list. Only 04 of the 23 supermarkets were in the range of 80 to 90% of the overall percentage of compliance, representing only 17.3% of the sample. Most of the sample submitted in a regular situation, according to the methodology of Cardoso (2001). Of the 23 supermarkets studied, 03 supermarkets were classified as poor (13.04%), 13 as scheduled (56.52%) as good and 07 (30.43%). You can see improvements in a small part of the sample, but the decline in the percentage of compliance of 02 companies after working for the implementation of the program, showing lack of responsibility and commitment of companies which should have as its top priority to food safety that market

Análise de antenas utilizando substrato cerâmico, zpt, produzido por síntese auto propagante para aplicações em sistemas de micro-ondas

Ceramic substrates have been investigated by researchers around the world and has achieved a high interest in the scientific community, because they had high dielectric constants and excellent performance in the structures employed. Such ceramics result in miniaturized structures with dimensions well reduced and high radiation efficiency. In this work, we have used a new ceramic material called lead zinc titanate in the form of Zn0,8Pb0,2TiO3, capable of being used as a dielectric substrate in the construction of various structures of antennas. The method used in constructing the ceramic combustion synthesis was Self- Sustained High Temperature (SHS - "Self-Propagating High-Temperature Synthesis") which is defined as a process that uses highly exothermic reactions to produce various materials. Once initiated the reaction area in the reaction mixture, the heat generated is sufficient to become self-sustaining combustion in the form of a wave that propagates converting the reaction mixture into the product of interest. Were analyzed aspects of the formation of the composite Zn0,8Pb0,2TiO3 by SHS powders and characterized. The analysis consisted of determining the parameters of the reaction for the formation of the composite, as the ignition temperature and reaction mechanisms. The production of composite Zn0,8Pb0,2TiO3 by SHS performed in the laboratory, was the result of a total control of combustion temperature and after obtaining the powder began the development of ceramics. The product was obtained in the form of regular, alternating layers of porous ceramics and was obtained by uniaxial pressing. 10 The product was characterized by analysis of dilatometry, X-ray diffraction analysis and scanning electron microscopy. One of the contributions typically defined in this work is the development of a new dielectric material, nevertheless presented previously in the literature. Therefore, the structures of the antennas presented in this work consisted of new dielectric ceramics based Zn0,8Pb0,2TiO3 usually used as dielectric substrate. The materials produced were characterized in the microwave range. These are dielectrics with high relative permittivity and low loss tangent. The Ansoft HFSS, commercial program employee, using the finite element method, and was used for analysis of antennas studied in this work

Revisitando o problema de visibilidade para visualização tridimensional

We revisit the problem of visibility, which is to determine a set of primitives potentially visible in a set of geometry data represented by a data structure, such as a mesh of polygons or triangles, we propose a solution for speeding up the three-dimensional visualization processing in applications. We introduce a lean structure , in the sense of data abstraction and reduction, which can be used for online and interactive applications. The visibility problem is especially important in 3D visualization of scenes represented by large volumes of data, when it is not worthwhile keeping all polygons of the scene in memory. This implies a greater time spent in the rendering, or is even impossible to keep them all in huge volumes of data. In these cases, given a position and a direction of view, the main objective is to determine and load a minimum ammount of primitives (polygons) in the scene, to accelerate the rendering step. For this purpose, our algorithm performs cutting primitives (culling) using a hybrid paradigm based on three known techniques. The scene is divided into a cell grid, for each cell we associate the primitives that belong to them, and finally determined the set of primitives potentially visible. The novelty is the use of triangulation Ja 1 to create the subdivision grid. We chose this structure because of its relevant characteristics of adaptivity and algebrism (ease of calculations). The results show a substantial improvement over traditional methods when applied separately. The method introduced in this work can be used in devices with low or no dedicated processing power CPU, and also can be used to view data via the Internet, such as virtual museums applications

Avaliação operacional do controle mecânico de plantas aquáticas imersas no reservatório de Jupiá

O presente trabalho foi realizado com o objetivo de estudar a coleta e o descarte de plantas aquáticas em diferentes locais e infestações do sistema Tietê/Paraná, no reservatório de Jupiá. A operação foi realizada com auxílio de instrumentação instalada em uma colhedora de plantas aquáticas, com sistema de GPS dotado de sinal de correção diferencial. Os tempos gastos para carregar e descarregar a colhedora foram determinados por cronometragem, e a distância do ponto final de coleta ao ponto de descarte e o tempo de deslocamento, por cronometragem e uso de GPS convencional. em algumas coletas foram demarcados polígonos, instruindo-se o operador a trabalhar exclusivamente na área correspondente. A interpretação dos resultados permitiu determinar a participação do tempo de coleta em relação ao tempo total de operação, indicando um valor significativo do ponto de vista operacional (>70%). Considerando o descarte em áreas infestadas com taboa, o deslocamento total médio foi de apenas 383 m, com gasto médio de 200,96 s. Os valores de capacidade operacional da colhedora oscilaram entre 0,23 e 1,60 ha h-1, indicando valor médio de 4,48 ha dia-1. A maior limitação à capacidade operacional associou-se à velocidade média de deslocamento, com maior agravante em áreas com altas infestações ou profundas. Considerando-se o deslocamento da colhedora, houve grande dificuldade de orientação em condições normais de operação, inviabilizando a manutenção de espaçamentos uniformes entre as faixas de coleta e sobrepondo as passagens. Conclui-se que a avaliação operacional indicou a impossibilidade de operar a colhedora sem o auxílio de um sistema de navegação que permita orientar a sua movimentação nas áreas de controle.

Obtenção e caracterização de um compósito de poliuretano de mamona e pó de vidro para aplicações em insolantes térmicos

Thermal insulation is used to protect the heated or cooled surfaces by the low thermal conductivity materials. The rigid ricin polyurethane foams (PURM) are used for thermal insulation and depend on the type and concentration of blowing agent. Obtaining PURM occurs by the use of polyol, silicone, catalyst and blowing agent are pre -mixed, reacting with the isocyanate. The glass is reusable, returnable and recyclable heat insulating material, whose time of heat dissipation determines the degree of relaxation of its structure; and viscosity determines the conditions for fusion, operating temperatures, annealing, etc. The production of PURM composites with waste glass powder (PV) represents economical and renewable actions of manufacturing of thermal insulating materials. Based on these aspects, the study aimed to produce and characterize the PURM composites with PV, whose the mass percentages were 5, 10, 20, 30, 40 and 50 wt%. PURM was obtained commercially, while the PV was recycled from the tailings of the stoning process of a glassmaking; when the refining process was applied to obtain micrometer particles. The PURM + PV composites were studied taking into account the standard sample of pure PURM and the influence of the percentage of PV in this PURM matrix. The results of the chemical, physical and morphological characterization were discussed taking into account the difference in the microstructural morphology of the PURM+PV composites and the pure PURM, as well the results of the physicochemical, mechanical e thermophysical tests by values obtained of density, hardness, compressive strength, specific heat, thermal conductivity and diffusivity. In general, the structure of pure PURM showed large, elongated and regular pores, while PURM+PV composites showed irregular, small and rounded pores with shapeless cells. This may have contributed to reducing their mechanical strength, especially for PURM - PV50. The hardness and density were found to have a proportional relationship with the PV content on PURM matrix. The specific heat, thermal diffusivity and thermal conductivity showed proportional relationship to each other. So, this has been realized that the increasing the PV content on PURM matrix resulted in the rise of diffusivity and thermal conductivity and the decrease of the specific heat. However, the values obtained by the PURM composites were similar the values of pure PURM, mainly the PURM-PV5 and PURM-PV10. Therefore, these composites can be applied like thermal insulator; furthermore, their use could reduce the production costs and to preserve the environment