905 resultados para Plates ninety five
Resumo:
Boron adsorption was studied in five representative soils (Rhodic Hapludox, Arenic Paleudalf and three Typic Hapludox) from the State of São Paulo, Brazil. Adsorption was higher in the clayey Oxisols, followed by the Alfisol and the coarser Oxisols. Calcium carbonate promoted an increase in the amount of adsorbed boron in all soils, with the most pronounced effect in the coarser-textured Oxisols. High correlation coefficients were found between adsorbed boron and clay and amorphous aluminum oxide contents and specific surface area (r = 0.79, 0.76 and 0.73, respectively, p < 0.01). Clay content, free aluminum oxide, and hot CaCl2 (0.01 mol L-1)-extracted boron explained 93% of the variation of adsorbed boron. Langmuir and Freundlich isotherms fitted well to the adsorbed data, and highest values for maximum boron adsorption were found in clayey soils, which were significantly correlated with contents of total, free and amorphous iron and aluminum oxides, as well with the physical attributes. Ninety four percent of the variation in the maximum adsorption could be related to the free iron content.
Resumo:
The use of lightweight aggregates in pretensioned prestressed concrete beams is becoming more advantageous as our design criteria dictate longer span concrete bridges. Bridge beams of greater lengths have been restricted from travel on many of our highways because the weight of the combined beams and transporting vehicle was excessive, making hauls of any distance prohibitive. This, along with the fact that new safety requirements necessitate the use of longer spans in grade separation structures over major highways, prompted the State of Iowa to investigate the use of lightweight aggregate bridge beams. The objective of this project is the collection of field deflection measurements for five pretensioned prestressed lightweight aggregate concrete bridge beams fabricated by conventional plant processes; also the comparison of the actual cambers and deflections of the beams with that predicted from the design assumptions.
Resumo:
OBJECTIVES: Activity of rifampicin against Propionibacterium acnes biofilms was recently demonstrated, but rifampicin resistance has not yet been described in this organism. We investigated the in vitro emergence of rifampicin resistance in P. acnes and characterized its molecular background. METHODS: P. acnes ATCC 11827 was used (MIC 0.007 mg/L). The mutation rate was determined by inoculation of 10(9) cfu of P. acnes on rifampicin-containing agar plates incubated anaerobically for 7 days. Progressive emergence of resistance was studied by serial exposure to increasing concentrations of rifampicin in 72 h cycles using a low (10(6) cfu/mL) and high (10(8) cfu/mL) inoculum. The stability of resistance was determined after three subcultures of rifampicin-resistant isolates on rifampicin-free agar. For resistant mutants, the whole rpoB gene was amplified, sequenced and compared with a P. acnes reference sequence (NC006085). RESULTS: P. acnes growth was observed on rifampicin-containing plates with mutation rates of 2 ± 1 cfu × 10(-9) (4096× MIC) and 12 ± 5 cfu × 10(-9) (4 × MIC). High-level rifampicin resistance emerged progressively after 4 (high inoculum) and 13 (low inoculum) cycles. In rifampicin-resistant isolates, the MIC remained >32 mg/L after three subcultures. Mutations were detected in clusters I (amino acids 418-444) and II (amino acids 471-486) of the rpoB gene after sequence alignment with a Staphylococcus aureus reference sequence (CAA45512). The five following substitutions were found: His-437 → Tyr, Ser-442 → Leu, Leu-444 → Ser, Ile-483 → Val and Ser-485 → Leu. CONCLUSION: The rifampicin MIC increased from highly susceptible to highly resistant values. The resistance remained stable and was associated with mutations in the rpoB gene. To our knowledge, this is the first report of the emergence of rifampicin resistance in P. acnes.
Resumo:
The aim of this study was to prospectively evaluate the accuracy and predictability of new three-dimensionally preformed AO titanium mesh plates for posttraumatic orbital wall reconstruction.We analyzed the preoperative and postoperative clinical and radiologic data of 10 patients with isolated blow-out orbital fractures. Fracture locations were as follows: floor (N = 7; 70%), medial wall (N = 1; 1%), and floor/medial wall (N = 2; 2%). The floor fractures were exposed by a standard transconjunctival approach, whereas a combined transcaruncular transconjunctival approach was used in patients with medial wall fractures. A three-dimensional preformed AO titanium mesh plate (0.4 mm in thickness) was selected according to the size of the defect previously measured on the preoperative computed tomographic (CT) scan examination and fixed at the inferior orbital rim with 1 or 2 screws. The accuracy of plate positioning of the reconstructed orbit was assessed on the postoperative CT scan. Coronal CT scan slices were used to measure bony orbital volume using OsiriX Medical Image software. Reconstructed versus uninjured orbital volume were statistically correlated.Nine patients (90%) had a successful treatment outcome without complications. One patient (10%) developed a mechanical limitation of upward gaze with a resulting handicapping diplopia requiring hardware removal. Postoperative orbital CT scan showed an anatomic three-dimensional placement of the orbital mesh plates in all of the patients. Volume data of the reconstructed orbit fitted that of the contralateral uninjured orbit with accuracy to within 2.5 cm(3). There was no significant difference in volume between the reconstructed and uninjured orbits.This preliminary study has demonstrated that three-dimensionally preformed AO titanium mesh plates for posttraumatic orbital wall reconstruction results in (1) a high rate of success with an acceptable rate of major clinical complications (10%) and (2) an anatomic restoration of the bony orbital contour and volume that closely approximates that of the contralateral uninjured orbit.
Resumo:
OBJECTIVE: To identify factors associated with intent to stay in hospital among five different categories of healthcare professionals using an adapted version of the conceptual model of intent to stay (CMIS). DESIGN: A cross-sectional survey targeting Lausanne University Hospital employees performed in the fall of 2011. Multigroup structural equation modeling was used to test the adapted CMIS model among professional groups. Measures Satisfaction, self-fulfillment, workload, working conditions, burnout, overall job satisfaction, institutional identification and intent to stay. PARTICIPANTS: Surveys of 3364 respondents: 494 physicians, 1228 nurses, 509 laboratory technicians, 935 administrative staff and 198 psycho-social workers. RESULTS: For all professional categories, self-fulfillment increased intent to stay (all β > 0.14, P < 0.05). Burnout decreased intent to stay by weakening job satisfaction (β < -0.23 and β > 0.22, P < 0.05). Some factors were associated with specific professional categories: workload was associated with nurses' intent to stay (β = -0.15), and physicians' institutional identification mitigated the effect of burnout on intent to stay (β = -0.15 and β = 0.19). CONCLUSION: Respondents' intent to stay in a position depended both on global and profession-specific factors. The identification of these factors may help in mapping interventions and retention plans at both a hospital level and professional groups' level.
Resumo:
Objective: To determine the variation in prevalence of temporomandibular disorders (TMD), other side effects, and technical complications during 5 years of sleep apnea treatment with a mandibular advancement device. Materials and Methods: Forty patients diagnosed with obstructive sleep apnea received an adjustable appliance at 70% of the maximum protrusion. The protrusion was then progressively increased. TMD (diagnosed according to the Research Diagnostic Criteria for TMD), overjet, overbite, occlusal contacts, subjective side effects, and technical complications were recorded before and a mean of 14, 21, and 58 months after treatment and analyzed by the Wilcoxon test (P Less-than .05). Results: Fifteen patients still used the oral appliance at the 5-year follow-up, and no significant variation in TMD prevalence was observed. Subjective side effects were common, and a significant reduction was found in overjet, overbite, and in the number of occlusal contacts. Furthermore, the patients made a mean of 2.5 unscheduled dental visits per year and a mean of 0.8 appliance repairs/relines per year by a dental technician. The most frequent unscheduled visits were needed during the first year and were a result of acrylic breakage on the lateral telescopic attachment, poor retention, and other adjustments to improve comfort. Conclusions: Five-year oral appliance treatment does not affect TMD prevalence but is associated with permanent occlusal changes in most sleep apnea patients during the first 2 years. Patients seek several unscheduled visits, mainly because of technical complications.
Resumo:
Some physiological and morphological responses of five Brachiaria brizantha accessions (BRA000591 cultivar Marandu, BRA003441, BRA002844, BRA004308 and BRA004391) were compared for plants grown in pots under flooding and well-drained conditions for 14 days. Flooding caused a significant reduction in leaf dry mass production in all accessions, but, for root biomass, no differences between treatments could be detected in BRA003441 and BRA004391. No adventitious root production was observed in flooded BRA003441; all other accessions produced adventitious roots when flooded. Relative growth rate was reduced by flooding only in BRA000591 and BRA004308. Leaf elongation rate was reduced by flooding in all accessions, however, more severely in BRA003441. Net photosynthesis was reduced by flooding in all accessions, but with less intensity in BRA004391. For all accessions, there was a close relationship between net photosynthesis and stomatal conductance under flooding. The five accessions tested differed in tolerance to flooding. BRA004391 was the most tolerant. Accession BRA003441 was the most sensitive, followed by BRA000591 cultivar Marandu. Accessions BRA002844 and BRA004308 were classified as intermediate in flooding tolerance.
Resumo:
Combined report on the institutions under the control of the Iowa Department of Human Services for the five years ended June 30, 2013
Resumo:
Combined report on the institutions under the control of the Iowa Department of Corrections for the five years ended June 30, 2013
Resumo:
OBJECTIVES: To delineate the various factors contributing to failure or delay in decannulation after partial cricotracheal resection (PCTR) in children. STUDY DESIGN: Case series. SETTING: Academic tertiary medical center. SUBJECTS AND METHODS: A retrospective case review of 100 children who underwent PCTR between 1978 and 2008 for severe subglottic stenosis using an ongoing database. RESULTS: Ninety of 100 (90%) patients were decannulated. Six patients needed secondary tracheostomy. The results of the preoperative evaluation showed grade II stenosis in four patients, grade III in 64 patients, and grade IV in 32 patients. The overall decannulation rate was 100 percent in grade II, 95 percent in grade III, and 78 percent in grade IV stenosis. Fourteen (14%) patients required revision open surgery. The most common cause of revision surgery was posterior glottic stenosis. Partial anastomotic dehiscence was seen in four patients. Delayed decannulation (>1 year) occurred in nine patients. Overall mortality rate in the whole series was 6 percent. No deaths were directly related to the surgery. No iatrogenic recurrent laryngeal nerve injury was present in the entire series. CONCLUSION: Comorbidities and associated syndromes should be addressed before PCTR is planned to improve the final postoperative outcome in terms of decannulation. Perioperative morbidity due to anastomotic dehiscence, to a certain extent, can be avoided by intraoperative judgment in the selection of double-stage surgery when more than five tracheal rings need to be resected. Subglottic stenosis with glottic involvement continues to pose a difficult challenge to pediatric otolaryngologists, often necessitating revision procedures.
Resumo:
In vitro regeneration of Arachis retusa was examined for the purpose of germplasm renewal and conservation. Random amplified polymorphic DNA (RAPD) fingerprinting was used to evaluate the genetic stability of plants derived from embryo axes and apical segments. Ten arbitrary decamer primers were screened and five of them were selected. Ninety genomic regions were evaluated, with an average of 18 loci per clone. All amplified segments were monomorphic. The results indicate that recovered plants are genetically stable at the assessed genomic regions and that both regeneration processes are suitable for in vitro germplasm preservation of Arachis species.
Resumo:
Background: Roux-en-Y gastric bypass (RYGBP) and gastric banding (GB) are the two most popular bariatric procedures. Only few studies have compared their results and follow-up duration is usually limited to <3 years. Patients and Methods: Using our prospective bariatric database, we matched non-superobese GB to RYGBP patients for sex, age and BMI to RYGBP. Follow-up considered up to five years. Results: 442 patients were matched in 221 pairs. Mean age (38,6) and mean BMI (43) were identical. Overall operative morbidity was higher after RYGBP (17,2 versus 5,4 %, p<0,001), but major morbidity was similar (3,6 versus 2,2 %, p=0,57). More patients developed long-term complications after GB (43,9 % versus 19 %, p<0,001), and more required reoperations (24,4 % versus 12 %, p=0,001). After RYGBP, reoperations were mainly due to internal hernias (87 %), with no reversal, whereas 18,5 % of the GB patients required band removal. Even including only patients who retained their band, weight loss after RYGBP was better throughout the study period, with 5-year EBMIL of 77,6 % and 61,7 % (p<0,001) after RYGBP and GB respectively. RYGBP was associated with better food tolerance and greater improvement of the lipid profile. Conclusions: GB is associated with a smaller overall operative morbidity and similar major morbidity, but with more long-term complications, more reoperations, a significant number of reversal or conversion procedures, and reduced weight loss when compared with RYGBP. Five-year results of RYGBP are superior to GB and patients should be informed accordingly.