957 resultados para Pest control industry
Resumo:
This paper analyzes some optimal fiscal, pricing, and capacity investment policies for controlling regional monopoly power in the natural gas industry. By letting the set of control instruments available to the social planner vary, we provide a characterization of the technological and demand conditions under which “excess” capacity in the transport network arises in response to the loss of the two other control instruments, namely, transfers and pricing. Hence, the analysis yields some insights on an economy’s incentives to invest in infrastructures for the purpose of integrating geographically isolated markets.
Resumo:
Estudi de la implantació del control automàtic en la producció d'una indústria farmacèutica, concretament en sis línies de màquines. A part de portar un control es pretén millorar la producció i a la vegada detectar qualsevol error o anomalia que es produeixi en aquestes màquines
Resumo:
La satisfacció és una preocupació crucial pels clients i per les organitzacions, incloent els bancs. L'estudi examina la satisfacció global dels clients dels bancs a Ghana i Espanya. Així s'analitzen aspectes com la relació entre satisfacció global i les dimensions de qualitat dels serveis bancari, així com les pròpies dimensions principals de la qualitat d'aquests serveis. Finalment, les percepcions sobre aquestes dimensions son comparades entre els bancs de Ghana i Espanya. S'han analitzat els clients de 819 bancs de Ghana i Espanya, els resultats van mostrar que els clients espanyols estaven més descontents respecte les dimensions tangibles i empatia metre que els clients de Ghana puntuaven pitjar la dimensió conveniència. En general, els clients de Ghana estaven força més descontents amb els serveis bancaris que els d'Espanya. La fiabilitat, l'empatia i la conveniència son els predictors de satisfacció global en Ghana, mentres que la fiabilitat és la única dimensió que explica la satisfacció global a Espanya.
Resumo:
L'objectiu d'aquesta tesi és l'estudi dels valors límit d'exposició professional previstos en la normativa actual com a valors de referència per a l'avaluació i control dels riscos que comporta l'exposició a agents químics presents en el lloc de treball, fonamentalment per inhalació, per protegir la salut dels treballadors. No es pretén realitzar ni un estudi epidemiològic ni un estudi d'higiene, només s'utilitzen els valors d'exposició professional per analitzar el compliment de la normativa sobre la presència de plom en l'ambient de treball, i comprovar si el compliment de la normativa comporta la millora de la salut dels treballadors en funció de la millora de les concentracions de valors ambientals o biològics de l'exposició dels treballadors. La Directiva 98/24/CE deroga les Directives 80/1107/CEE sobre la protecció dels treballadors contra els riscos relacionats amb l'exposició a agents químics, físics i biològics durant el treball, i la Directiva 82/605/CEE, sobre la protecció dels treballadors contra riscos relacionats amb una exposició al plom metàl·lic i als seus compostos iònics durant el treball. S'analitza l'evolució de la normativa sobre la presència d'agents químics en l'ambient de treball, i en concret el plom, i la seva incidència en els accidents laborals i malalties professionals, i el compliment de la normativa al final d'un cicle marcat per l'entrada en vigor de la Directiva 98/24/CE. Per realitzar l'anàlisi anteriorment esmentada s'estudia la indústria ceràmica de les comarques gironines, de la construcció, de l'alimentació i decorativa, a través de les mesures de plom en l'ambient laboral i les mesures de plom en sang dels treballadors d'aquesta indústria des de 1991 a 1996.
Resumo:
The grapevine moth Lobesia botrana (Denis & Schiffermuller) (Lepidoptera: Tortricidae) is a key pest of grapevines in Greece. As part of a broader study on integrated pest management, the effects were investigated of different cultural methods on the establishment and survival of L. botrana, specifically: application of different nitrogen levels (30 and 100 units of ammonium sulfate or 70 units of Agrobiosol); summer leaf and shoot pruning; application of growth regulators (Regalis, probexadione-calcium; or Falgro, gibberellic acid). There were significant differences among the three levels of N application. The lowest L. botrana infestation rates were found in plots treated with 30 units of (NH4)(2)SO4 and plots that received some summer pruning. Following the application of plant growth regulators, the lowest L. botrana infestation levels occurred in the plots treated with Regalis or Falgro at the manufacturers' recommended concentrations. On vines where growth regulators had been applied, the clusters had fewer berries than those not treated with growth regulators.
Resumo:
Studies in polytunnels were conducted to investigate the effects of ultraviolet (UV)-blocking films on naturally occurring insect pests and their arthropod natural enemies on a cucumber crop. Within tunnels clad with Antibotrytis (blocks light < 400 nm) and UVI/EVA (UV transmitting), 5.8 and 23.4 times more aphids, respectively, were recorded on traps compared with those on traps within tunnels clad with XL 385 (blocks light < 385 nm). When all plants within the UVI/EVA tunnels had become heavily infested with aphids, half of the plants in XL 385 tunnels were uninfested. More Coleoptera and thrips (approximately two times) were recorded under the UVI/EVA film than under the UV-blocking films, but for other arthropod pests (e. g. whitefly, leafhoppers), clear conclusions could not be drawn as low numbers were recorded. Substantial numbers of chalcid parasitoids and syrphids were found under the UV-blocking films, but further research is needed to evaluate fully the effect of such films on biological control of aphids. Higher syrphid numbers and more aphid mummies were recorded under the UVI/EVA film, probably because of the higher numbers of aphids present in tunnels clad with this film. The potential that UV-blocking films have as an effective component of commercial Integrated Pest Management (IPM) systems, for protected horticultural crops, is discussed.
Resumo:
Organic farming has increased in popularity in recent years, primarily as a response to the perceived health and conservation benefits. While it is likely that conventional farming will be able to respond rapidly to variations in pest numbers and distribution resulting from climatic change, it is not clear if the same is true for organic farming. Few studies have looked at the responses of biological control organisms to climate change. Here, I review the direct and indirect eects of changes in temperature, atmospheric carbon dioxide and other climatic factors on the predators, parasitoids and pathogens of pest insects in temperate agriculture. Finally, I consider what research is needed to manage the anticipated change in pest insect dynamics and distributions.
Resumo:
In the absence of equivalent research on genetically modified (GM) pest-resistant crops, their impact in pest management can be predicted from experience with traditionally bred varieties which share with GM crops the characteristic that the resistance is based on high expression of a single toxin. Such varieties lead to the rapid selection of tolerant pest strains, damage biological control and induce tolerance to synthetic pesticides. By contrast, polygenic and more broadly based resistant varieties will maintain their resistance for longer, and often synergise beneficially with biological control. The pests also become more susceptible to insecticides, giving the opportunity for applications which are selective in favour of natural enemies. However, although GM crops compare badly with traditional pest-resistant varieties, they compare favourably with insecticides, the technology they are most likely to replace.
Resumo:
Electrospinning is a route to polymer fibres with diameters considerably smaller than available from most fibre-producing techniques. We explore the use of a low molecular weight compound as an effective control additive during the electrospinning of poly(epsilon-caprolactone). This approach extends the control variables for the electrospinning of nanoscale fibres from the more usual ones such as the polymer molecular weight, solvent and concentration. We show that through the use of dual solvent systems, we can alter the impact of the additive on the electrospinning process so that finer as well as thicker fibres can be prepared under otherwise identical conditions. As well as the size of the fibres and the number of beads, the use of the additive allows us to alter the level of crystallinity as well as the level of preferred orientation of the poly(epsilon-caprolactone) crystals. This approach, involving the use of a dual solvent and a low molar mass compound, offers considerable potential for application to other polymer systems. (C) 2010 Society of Chemical Industry
Resumo:
Commercial mango production in Ghana is a relatively young industry faced with several pest problems including the mango stone weevil, Sternochetus mangiferae (F.). There is an urgent need to control this and other pests to facilitate access to the international export market for fresh mango fruits. A literature survey identifies stone weevil control tactics in the areas of host plant resistance, administrative and legislative controls, use of pesticides, biological control, cultural control and quarantine and phytosanitary measures that have been developed in other mango-producing areas. We assess these pest management approaches for their relevance to Ghana and West Africa, with emphasis on the research required for their appropriate, effective and sustainable use in the systems of mango production of the West African sub-region. The importance of processing and value addition technologies, as a means of circumventing the quarantine hurdles of S. mangiferae, is highlighted.
Resumo:
The purpose of this paper is to design a control law for continuous systems with Boolean inputs allowing the output to track a desired trajectory. Such systems are controlled by items of commutation. This type of systems, with Boolean inputs, has found increasing use in the electric industry. Power supplies include such systems and a power converter represents one of theses systems. For instance, in power electronics the control variable is the switching OFF and ON of components such as thyristors or transistors. In this paper, a method is proposed for the designing of a control law in state space for such systems. This approach is implemented in simulation for the control of an electronic circuit.
Resumo:
This volume is based on a seminar concerned with advanced methods in adaptive control for industrial applications which was held in Prague in May 1990 and which brought together experts in the UK and Czechoslovakia in order to suggest solutions to specific current and anticipated problems faced by industry.