Contribuições da inserção musical para a qualidade de vida no trabalho em ambiente laboral fabril

The present thesis aimed at understanding how the insertion of music in the work environment contributes to achieving Quality of Work Life. - QWL, under the perspective of biopsychosocial and organizational well-being. As to music insertion we considered the theoretical-empirical perception about how music is inserted at work and its functions on such place. The context where the study was taken was the manufacturing area of a major textile company, located in Natal, state of Rio Grande do Norte, Brazil, in which music is used during labor activities. The only study case was the research strategy adopted, with exploratory and descriptive purposes. The primary data were collected through the focus group technique, applied to the collaborator in the manufacturing sector. The semi-structured interview was done as a complementary tool, directed to the supervisor in that sector. Respecting the theoretical saturation criterion, we formed four focus groups, each one composed of eight members randomly selected, among the seventy-six collaborators in the sector. The data were analyzed qualitatively, through the content analysis technique, more specifically the category analysis. We identified twenty-eight QWL attributes. Six of them were found present in the four focus groups and in the interview. Among these ones, the attribute of Interpersonal Relationship at Work, contemplating the Psychological and Organizational dimensions, was the only one anticipated in four out of fifteen theoretical models here listed. The attribute Music at Work Environment could be inserted in the four QWL dimensions, highlighting the power and relevance of this attribute for the research participants. The way music has been inserted in the labor environment contributes to promoting well-being at work, which goes against theoretical conceptions, especially when it comes to musical genre. We identified nine functions of music at work, among which, Improving Work Conditions, Improving Interpersonal Relationship at Work and Favoring Motivation for Work had to be emphasized for being associated to three QWL attributes. In the total, we highlighted seven associations. The most affected QWL dimension through the insertion of music at work was the Psychological one, followed by the Organizational one. We conclude that music insertion provides biological, social and, above all, psychological and organizational well-being to the contributors, thus contributing to obtaining QWL at the labor environment researched. However, we should consider the context and proceed to periodical plans and adjustments in the way of music insertion so as to avoid health and well-being problems to those people at work

Inserção de fornecedores locais como fonte de desempenhos em custos de transação e legitimidade: estudo de caso na cadeia produtiva do petróleo e gás do Rio Grande do Norte

The inclusion of local suppliers in production chains has considerable impact on its performance, but most notably in its main actors. The results of this process may be of different kinds and can be analyzed from economic or institutional approaches. This study aimed to verify the existence of different performances of Petrobras due to the inclusion of local suppliers in the oil and gas production chain in the state of Rio Grande do Norte, from the viewpoints of transaction costs and the Institutional Theory. In order to this, were made the characterization of the PROMINP, the description of its actions and results, the mapping of its institutional context of reference, and identification of results obtained by Petrobras in terms of transaction costs and legitimacy. The theoretical framework is based on authors dealing with industrial concentration, as like Marshall, Krugman, Porter and Schmitz, from the sociological perspective of neoinstitucional theory, as like DiMaggio and Powell and Scott and Meyer, and transaction costs, as like Williamson. This is a qualitative research, with data collection done by consulting secondary fonts and semi-structured interviews with nineteen actors of three groups, namely: actors involved in actions of the program, representatives of enterprises and representative of Petrobras. To analyze the content was used the Suchman s model (1995) for categories associated with strategies of legitimation and fourteen variables associated with the three variables assets specificity, bounded rationality and opportunism (Williamson, 1995, 1989) in the case of transaction costs. The results indicate that PROMINP has achieved its objectives by encouraging the increased participation of local companies in the oil and gas production chain, reflecting in the economic development of the state. The Redepetro/RN, fostered and built upon the interaction of the participants, is presented as a solution of continuity to the participation of enterprises in the chain, after the closure of the actions of the program. PROMINP demands responses to coercive, legislative and regulatory pressures of the organizational field, whose institutional context of reference is wide. From the point of view of legitimacy, through strategies to gain cognitive legitimacy and maintaining pragmatic legitimacy, Petrobras can manipulate the environment, ensuring the compliance of the constituents to their technical and institutional demands. Enterprises, in turn, respond to the demands through compliance with technical demands, mainly through the certification of processes, and cultural changes. There aren t clear gains related to the transaction costs, however, gains in legitimacy can be seen as a cumulative capital that can serve as a competitive differential that generates economic gains. In terms of theoretical findings, it was found that, due to its explanatory power for actions that are difficult to explain only in economic terms, Institutional Theory may be used as theoretical support concurrent with other theories. TCE model has limitations in explaining the program actions. In the case, it s emphasized that Petrobras doesn t seek only economic efficiency, but has in its mission the commitment to social development.

A verdade (des)construída: a inserção da homossexualidade na comunidade cristã Nova Esperança, em Natal

The religious plurality has been increasingly intense in Brazil, while it has served as an object of study in various fields of knowledge. In this context, this paper aims to point out the general heterogeneity among experienced growth of Protestant and evangelical denominations, especially those who claim to be inclusive by attending to human diversity, seeking to understand the relationship between religion and homosexuality. Specific objectives aim to understand the functioning and speeches produced by Comunidade Cristã Nova Esperança in Natal. The theoretical framework was seated in the works of Bento (2008), Lima (2009), Goffman (2001), Natividade (2008), Musskopf (2008), Helminiak (1998), Foucault (1997), among others. We tried to discuss the trajectory and how is the process of organization of the Comunidade Cristã Nova Esperança in Natal, the social advances that have reached homosexuals in our country, how this institution has contributed to the shift in paradigm in Christianity in respect to matters pertaining to religion and homosexuality, and the meaning of being a homosexual christian from the viewpoint perceived by social subjects living this experience

Inserção da informática nos cursos de Arquitetura e Urbanismo do Brasil (1994 2006): diagnósticos, rebatimentos e perspectivas nas Instituições Federais de Ensino Superior do Nordeste: UFRN, UFPB e UFPE

This work supports the formalist education s improvement of the Brazilian architect and urban designer through a better application and systematization of the computer science s teaching potentialities. The research analyzes the discipline introduction in the Brazilian courses: Computer Science Applied to Architecture and Urbanism (InfoAU) in the Architecture and Urbanism Courses of Brazil (CAUs). It goes since the discipline was obligated by the MEC s Regulation nr. 1.770 from 1994 until the CNE/CES Resolution nr. 6 from 2006; it comprehends the discipline implantation, development and current context, in order to get more detailed, the research analyses three federal universities from the Northeast of the country: UFRN, UFPB and UFPE. Once identified the historical educational needs in the CAUs, the study focus on the computer science s increasing potential as an agent of integration, communication, development and knowledge/data management. It points out new social perspectives for a better use of this tool/mechanism, which adequately structuralized and integrated, creates propitious educational and professional performance/recycling conditions and a propeller instrument of research and extension activities. Among this work, it is suggested the aggregation of elements, which are complementary to the InfoAU discipline s reorganization, throughout a computerization s plan for the CAUs, extensive to the professional formation, generating a virtuous cycle in several activities of the academic, administrative and, research and extension s departments. Therefore, the InfoAU in the Brazilian CAUs context was analyzed; the main solutions and problems found were systemized; the possibilities of computer science s uses inside AU ware structuralized, InfoAU discipline s improvement plan was also defined, as well as strategies for the implementation of the computerization s plan for the CAUs, which would guarantee its maintenance in a continuity perspective

Desenvolvimento de um sistema misto de pasta à base de geopolímero e cimento portland para correção de perda de circulação

The materials engineering includes processes and products involving several areas of engineering, allowing them to prepare materials that fulfill the needs of various new products. In this case, this work aims to study a system composed of cement paste and geopolymers, which can contribute to solving an engineering problem that directly involves the exploitation of oil wells subject to loss of circulation. To correct it, has been already proposed the use of granular materials, fibers, reducing the drilling fluid or cement paste density and even surface and downhole mixed systems. In this work, we proposed the development of a slurry mixed system, the first was a cement-based slurry and the second a geopolymer-based slurry. The cement-based slurry was formulated with low density and extenders, 12.0 ppg (1.438 g/cm ³), showing great thixotropic characteristics. It was added nano silica at concentrations of 0.5, 1.0 and 1.5 gps (66.88, 133.76 and 200.64 L/m3) and CaCl2 at concentrations of 0.5, 1, 0 and 1.5%. The second system is a geopolymer-based paste formulated from molar ratios of 3.5 (nSiO2/nAl2O3), 0.27 (nK2O/nSiO2), 1.07 (nK2O/nAl2O3) and 13.99 (nH2O/nK2O). Finally, we performed a mixture of these two systems, for their application for correction of circulation lost. To characterize the raw materials, XRD, XRF, FTIR analysis and titration were performed. The both systems were characterized in tests based on API RP10B. Compressive strength tests were conducted after curing for 24 hours, 7 and 28 days at 58 °C on the cement-based system and the geopolymer-based system. From the mixtures have been performed mixability tests and micro structural characterizations (XRD, SEM and TG). The results showed that the nano silica, when combined with CaCl2 modified the rheological properties of the cement slurry and from the concentration of 1.5 gpc (200.64 L / m³) it was possible to obtain stable systems. The system mixture caused a change in the microstructure of the material by favoring the rate of geopolymer formation to hinder the C3S phase hydration, thus, the production of CSH phases and Portlandite were harmed. Through the mixability tests it can be concluded that the system, due to reduced setting time of the mixture, can be applied to plug lost circulation zones when mixed downhole

Modelagem e previsão da perda de injetividade em poços canhoneados

Waterflooding is a technique largely applied in the oil industry. The injected water displaces oil to the producer wells and avoid reservoir pressure decline. However, suspended particles in the injected water may cause plugging of pore throats causing formation damage (permeability reduction) and injectivity decline during waterflooding. When injectivity decline occurs it is necessary to increase the injection pressure in order to maintain water flow injection. Therefore, a reliable prediction of injectivity decline is essential in waterflooding projects. In this dissertation, a simulator based on the traditional porous medium filtration model (including deep bed filtration and external filter cake formation) was developed and applied to predict injectivity decline in perforated wells (this prediction was made from history data). Experimental modeling and injectivity decline in open-hole wells is also discussed. The injectivity of modeling showed good agreement with field data, which can be used to support plan stimulation injection wells

Estudo da perda de carga e calor no poço injetor no processo De drenagem gravitacional assistida por vapor (SAGD)

The oil companies in the area in general are looking for new technologies that can increase the recovery factor of oil contained in reservoirs. These investments are mainly aimed at reducing the costs of projects which are high. Steam injection is one of these special methods of recovery in which steam is injected into the reservoir in order to reduce the viscosity of the oil and make it more mobile. The process assisted gravity drainage steam (SAGD) using steam injection in its mechanism, as well as two parallel horizontal wells. In this process steam is injected through the horizontal injection well, then a vapor chamber is formed by heating the oil in the reservoir and, by the action of gravitational forces, this oil is drained down to where the production well. This study aims to analyze the influence of pressure drop and heat along the injection well in the SAGD process. Numerical simulations were performed using the thermal simulator STARS of CMG (Computer Modeling Group). The parameters studied were the thermal conductivity of the formation, the flow of steam injection, the inner diameter of the column, the steam quality and temperature. A factorial design was used to verify the influence of the parameters studied in the recovery factor. We also analyzed different injection flow rates for the model with pressure drop and no pressure drop, as well as different maximum flow rates of oil production. Finally, we performed an economic analysis of the two models in order to check the profitability of the projects studied. The results showed that the pressure drop in injection well have a significant influence on the SAGD process.

Análise da modelagem experimental da perda de injetividade

Injectivity decline, which can be caused by particle retention, generally occurs during water injection or reinjection in oil fields. Several mechanisms, including straining, are responsible for particle retention and pore blocking causing formation damage and injectivity decline. Predicting formation damage and injectivity decline is essential in waterflooding projects. The Classic Model (CM), which incorporates filtration coefficients and formation damage functions, has been widely used to predict injectivity decline. However, various authors have reported significant discrepancies between Classical Model and experimental results, motivating the development of deep bed filtration models considering multiple particle retention mechanisms (Santos & Barros, 2010; SBM). In this dissertation, inverse problem solution was studied and a software for experimental data treatment was developed. Finally, experimental data were fitted using both the CM and SBM. The results showed that, depending on the formation damage function, the predictions for injectivity decline using CM and SBM models can be significantly different

Efeito da perda de carga e calor no poço injetor no processo de drenagem gravitacional assistido com vapor e solvente

Nowadays, most of the hydrocarbon reserves in the world are in the form of heavy oil, ultra - heavy or bitumen. For the extraction and production of this resource is required to implement new technologies. One of the promising processes for the recovery of this oil is the Expanding Solvent Steam Assisted Gravity Drainage (ES-SAGD) which uses two parallel horizontal wells, where the injection well is situated vertically above the production well. The completion of the process occurs upon injection of a hydrocarbon additive at low concentration in conjunction with steam. The steam adds heat to reduce the viscosity of the oil and solvent aids in reducing the interfacial tension between oil/ solvent. The main force acting in this process is the gravitational and the heat transfer takes place by conduction, convection and latent heat of steam. In this study was used the discretized wellbore model, where the well is discretized in the same way that the reservoir and each section of the well treated as a block of grid, with interblock connection with the reservoir. This study aims to analyze the influence of the pressure drop and heat along the injection well in the ES-SAGD process. The model used for the study is a homogeneous reservoir, semi synthetic with characteristics of the Brazilian Northeast and numerical simulations were performed using the STARS thermal simulator from CMG (Computer Modelling Group). The operational parameters analyzed were: percentage of solvent injected, the flow of steam injection, vertical distance between the wells and steam quality. All of them were significant in oil recovery factor positively influencing this. The results showed that, for all cases analyzed, the model considers the pressure drop has cumulative production of oil below its respective model that disregards such loss. This difference is more pronounced the lower the value of the flow of steam injection

Avaliação da incontinência urinária de esforço em mulheres na pós-menopausa com e sem queixa de perda urinária através da aplicação do pad-test de 1 hora

Stress urinary incontinence (SUI) is defined as "involuntary loss of urine" due to several processes that alter the ability of the bladder to hold urine properly, regarded as a social and hygienic problem that adversely affects quality of life. In postmenopausal women, IU is associated with atrophy and weakness of the pelvic floor muscles. The objective this study was investigate, using the onehour pad test, stress urinary leakage (SUI), evaluate and compare their results in postmenopausal and premenopausal women. The survey was characterized as a cross-sectional study. The study consisted of 60 postmenopausal women were divided into GIU - consisting of 34 volunteers complaining of involuntary loss of urine during stress - and GSIU - consisting of 26 volunteers without complaints of loss of urine during stress, and 15 women, during the premenopausal (GPM), and ovulatory with normal menstrual cycle. All volunteers were evaluated clinically, subjected to one-hour pad test, after the biochemical evaluation of blood and sex hormones. Statistical analysis was performed by descriptive analysis, ANOVA, Turkey´s post-test and Pearson correlation. The results showed that 100% of postmenopausal patients had involuntary loss of urine during one hour pad test (GIU: 4.0 g; GSIU: 4.5 g). GPM remained continent after an hour pad test (GPM: 0.4 g). In addition, Pearson showed a strong correlation between urine loss with time since menopause (r = 0.8, p <0.01) and body mass index - BMI (r = 0.7; p = 0.01). These data suggest that the one-hour pad test is a useful test to assess and quantify urinary leakage, including those volunteers who had no previous complaint of SUI

Análise de parâmetros da função reprodutiva masculina após perda ponderal induzida pela cirurgia bariátrica

Introdução: A obesidade e suas formas extremas como a forma mórbida, vem assumindo preocupação nos sistemas de saúde pública e é atualmente considerado um dos mais importantes agravos de saúde no mundo desenvolvido. Acarreta repercussões em várias partes do corpo, com potencial para interferir negativamente também na função reprodutiva, recentemente sendo mais estudado na população masculina. Objetivo: avaliar parâmetros hormonais e seminais da função reprodutiva em um grupo de homens obesos mórbidos, antes e após 6 meses da perda de peso induzida pela cirurgia bariátrica. Métodos: Inicialmente, de uma amostra de 36 pacientes com idade entre 18 e 40 anos e índice de massa corporal (IMC) ≥40 Kg/m2, apenas 1 caso foi excluído por ser portador de hiperprolactinoma e outros 24 pacientes não completaram todo o protocolo de avaliação laboratorial solicitada. Um total de apenas 11 pacientes completou o protocolo. Todos foram previamente avaliados por uma equipe multidisciplinar. O grupo selecionado foi submetido a avaliação seminal e dosagens hormonais de testosterona total(TT), FSH e LH. Os parâmetros foram reavaliados após 6 meses de realização da cirurgia pela técnica de Y-em-Roux, para análise dos efeitos da perda de peso sobre os parâmetros da função reprodutiva. Resultados: No grupo selecionado ao estudo, os exames pré-operatórios mostraram um grupo heterogêneo de resultados. Após seis meses do tratamento cirúrgico, a perda ponderal foi significativa no grupo analisado, com redução do IMC de mediana 46 Kg/m2para mediana de 36 Kg/m2(p=0,03). Em relação ao perfil hormonal, houve elevação significativa do nível sérico de TT com mediana de 187ng/ml no período pré-operatório para 457 ng/ml (p=0,02) no período pós-operatório. Entre os períodos pré e pós-operatório, não foram observadas alterações significantes do FSH (2,70 mIU/ml para 3,31 mIU/ml, p=0,79), LH (4,82 mIU/ml para 3,00mIU/ml, p=0,39), concentração espermática (38milhões/ml para 31milhões/ml, p=0,88) e motilidade A+B (50% para 50%, p=0,89).Conclusão: A redução ponderal decorrente da cirurgia em obesos mórbidos parece levar a uma elevação dos níveis de testosterona total, sem alterações nas demais provas de avaliação reprodutiva. Estudos adicionais com casuística maior e múltiplos parâmetros são necessários para esclarecimento definitivo do impacto da obesidade e da perda de peso induzida pela cirurgia sobre a função reprodutiva masculina

Períodos de interferência das plantas daninhas na cultura da soja nos sistemas de semeadura direta e convencional

A presente pesquisa objetivou estudar os efeitos dos períodos de controle e de convivência de uma comunidade infestante sobre as características produtivas da soja nos sistemas de semeadura direta (SSD), com o cultivar CD 201, e convencional (SSC), com a MSOY-6101. No SSD, a comunidade infestante foi composta principalmente por Alternanthera tenella, Cenchrus echinatus e Bidens pilosa, com densidade máxima de 377 plantas m-2, acumulando 365,7 g m-2 de matéria seca, e, no SSC, por A. tenella, Senna obtusifolia e Panicum maximum, com densidade máxima de 161 plantas m-2, acumulando 406,7 g m-2. Tolerando cinco por cento de perda na produtividade da cultura, constatou-se que os períodos críticos de prevenção da interferência foram dos 33 aos 66 DAE para o cultivar CD 201 no SSD e dos 34 aos 76 DAE para o cultivar M-SOY-6101 no SSC. A interferência das plantas daninhas durante todo o ciclo da cultura reduziu, em média, 46% (SSD) e 32% (SSC) a produtividade de grãos da soja. Não houve efeito das plantas daninhas na estatura das plantas, na altura de inserção da primeira vagem e no número de vagens por planta.

Transplantes: re-inserção social e qualidade de vida dos transplantados cardíacos do Estado do RN

The experience of transplantation is a very serious situation from the clinical standpoint. Therefore, there must be some subjective and social breakdown in people who have been undergone such a procedure. Recent product of modernity, the transplanted is someone who owns his recover to the scientific advances of contemporary society and a deceased donor. This paper aims at examine the implications, from the changes in patterns of behavior and thought that occur after the experience of an extreme and critical situation, as the process of illness and its consequent transplant surgery. The symbolism of the heart suggests that some social impressions about the organ itself are also reflected in how the transplanted interprets the experience of this type of procedure. So investigating how the changes occurred throughout the process interfere in the re-insertion of these people to social life, after his recovery, is the purpose of this work. The concept of habitus coined by Pierre Bourdieu will be used to measure conceptually how this experience (clinical, modern and symbolic) fits in the contemporary discussion of sociology

Inclusão digital: a inserção das tecnologias informacionais nas escolas públicas da RMNatal

This study aims to determine the influence of Digital Inclusion in school performance of students from public high school in the metropolitan area of Natal, through the use of computers in a pedagogical and Internet use.Throughout the paper we try to answer the question: The pedagogical use of computers connected to the Internet contributes to improving the academic performance of students in public schools in the RMNatal? To answer the research question, we focus on the database INEP on the infrastructure of schools and the bank rates of school performance. For both technical procedures performed to obtain the relationship between Internet and School Performance. Then the School Settings have been configured for Digital Inclusion and made crosses with the approval rates, distortion and failure. The survey results indicate that according to the classification established in: Included in School Settings, School Settings deficit, Adverse Environments School and School Settings Deleted, which has prevailed in the metropolitan area of Natal are the schools that are provided outside.

Análise espacial dos fatores da equação universal de perda de solo em área de nascentes

O objetivo deste trabalho foi avaliar a perda de solo de área de nascentes da Microbacia do Córrego do Tijuco, SP. Foi utilizada a análise espacial dos fatores da equação universal da perda de solo (EUPS), em integração com análise de componentes principais e geoestatística. A perda de solo média, estimada para a área, foi de 118,5 Mg ha‑1 por ano, considerada alta. Próximo à zona urbana, houve alta interação dos fatores erosividade da chuva e práticas conservacionistas, o que evidencia grande perda de solo, em razão da concentração da água proveniente da camada impermeabilizada urbana, com alta velocidade de escoamento. Nos divisores de águas, a atuação da erodibilidade foi proeminente, em contraste com o fator topográfico. Foram observadas áreas com atuação conjunta destes fatores, inclusive em locais de inclinação suave, porém com alto potencial natural de erosão. A interação das análises multivariadas e geoestatística permite a estratificação da área, identifica locais com propriedades específicas quanto à perda de solo, e espacializa os fatores do processo erosivo e suas interações ao longo do relevo.