The Islamic Crossed-Arch Domes in Cordoba: Geometry and Structural Analysis of the “Capilla de Villaviciosa”

Crossed-arch domes are a singular type of ribbed vaults. Their characteristic feature is that the ribs that form the vault are intertwined, forming polygons or stars, leaving an empty space in the centre. The earliest known vaults of this type are found in the Great Mosque of Córdoba, built ca. 960 a.C. The type spread through Spain, and the north of Africa in the 10th to the 16th Centuries, and was used by Guarini and Vittone in the 17th and 18th Centuries in Italy. However, it was used only in a few buildings. Though the literature about the structural behaviour of ribbed Gothic vaults is extensive, so far no structural analysis of crossed arch domes has been made. The purpose of this work is, first to show the way to attack such an analysis within the frame of Modern Limit Analysis of Masonry Structures (Heyman 1995), and then to apply the approach to study the stability of the dome of the Capilla de Villaviciosa. The work may give some clues to art and architectural historians to understand better the origin and development of Islamic dome architecture.

The Ciborium or Lantern Tower of Valencia Cathedral: Geometry, Construction and Stability

Early 18th century treatise writer Tomas Vicente Tosca1 includes in his Tratado de la montea y cortes de Canteria [On Masonry Design and Stone Cutting], what is an important documentary source about the lantern of Valencia Cathedral. Tosca writes about this lantern as an example of vaulting over cross arches without the need of buttresses. A geometrical description is followed by an explanation of the structural behavior which manifests his deep understanding of the mechanics of masonry structures. He tries to demonstrate the absence of buttresses supporting his thesis on the appropriate distribution of loads which will reduce the "empujos" [horizontal thrusts] to the point of not requiring more than the thickness of the walls to stand (Tosca [1727] 1992, 227-230). The present article2 assesses T osca' s appreciation studying how loads and the thrusts they generate are transmitted through the different masonry elements that constitute this ciborium. In order to do so, we first present a geometrical analysis and make considerations regarding its materials and construction methods to, subsequently, analyze its stability adopting an equilibrium approach within the theoretical framework of the lower bound limit analysis.

The Ciborium or Lantern Tower of Valencia Cathedral: Geometry, Construction and Stability

Early 18th century treatise writer Tomas Vicente Tosca1 includes in his Tratado de la montea y cortes de Canteria [On Masonry Design and Stone Cutting], what is an important documentary source about the lantern of Valencia Cathedral. Tosca writes about this lantern as an example of vaulting over cross arches without the need of buttresses. A geometrical description is followed by an explanation of the structural behavior which manifests his deep understanding of the mechanics of masonry structures. He tries to demonstrate the absence of buttresses supporting his thesis on the appropriate distribution of loads which will reduce the "empujos" [horizontal thrusts] to the point of not requiring more than the thickness of the walls to stand (Tosca [1727] 1992, 227-230). The present article2 assesses T osca' s appreciation studying how loads and the thrusts they generate are transmitted through the different masonry elements that constitute this ciborium. In order to do so, we first present a geometrical analysis and make considerations regarding its materials and construction methods to, subsequently, analyze its stability adopting an equilibrium approach within the theoretical framework of the lower bound limit analysis.

Unconstrained and Contactless Hand Geometry Biometrics

This paper presents a hand biometric system for contact-less, platform-free scenarios, proposing innovative methods in feature extraction, template creation and template matching. The evaluation of the proposed method considers both the use of three contact-less publicly available hand databases, and the comparison of the performance to two competitive pattern recognition techniques existing in literature: namely Support Vector Machines (SVM) and k-Nearest Neighbour (k-NN). Results highlight the fact that the proposed method outcomes existing approaches in literature in terms of computational cost, accuracy in human identification, number of extracted features and number of samples for template creation. The proposed method is a suitable solution for human identification in contact-less scenarios based on hand biometrics, providing a feasible solution to devices with limited hardware requirements like mobile devices

Monte-Carlo dosimetry on a realistic cell monolayer geometry exposed to alpha particles

The energy and specific energy absorbed in the main cell compartments (nucleus and cytoplasm) in typical radiobiology experiments are usually estimated by calculations as they are not accessible for a direct measurement. In most of the work, the cell geometry is modelled using the combination of simple mathematical volumes. We propose a method based on high resolution confocal imaging and ion beam analysis (IBA) in order to import realistic cell nuclei geometries in Monte-Carlo simulations and thus take into account the variety of different geometries encountered in a typical cell population. Seventy-six cell nuclei have been imaged using confocal microscopy and their chemical composition has been measured using IBA. A cellular phantom was created from these data using the ImageJ image analysis software and imported in the Geant4 Monte-Carlo simulation toolkit. Total energy and specific energy distributions in the 76 cell nuclei have been calculated for two types of irradiation protocols: a 3 MeV alpha particle microbeam used for targeted irradiation and a 239Pu alpha source used for large angle random irradiation. Qualitative images of the energy deposited along the particle tracks have been produced and show good agreement with images of DNA double strand break signalling proteins obtained experimentally. The methodology presented in this paper provides microdosimetric quantities calculated from realistic cellular volumes. It is based on open-source oriented software that is publicly available.

Design, implementation and evaluation of an unconstrained and contactless biometric system based on hand geometry and stress detection

Esta tesis propone un sistema biométrico de geometría de mano orientado a entornos sin contacto junto con un sistema de detección de estrés capaz de decir qué grado de estrés tiene una determinada persona en base a señales fisiológicas Con respecto al sistema biométrico, esta tesis contribuye con el diseño y la implementación de un sistema biométrico de geometría de mano, donde la adquisición se realiza sin ningún tipo de contacto, y el patrón del usuario se crea considerando únicamente datos del propio individuo. Además, esta tesis propone un algoritmo de segmentación multiescala para solucionar los problemas que conlleva la adquisición de manos en entornos reales. Por otro lado, respecto a la extracción de características y su posterior comparación esta tesis tiene una contribución específica, proponiendo esquemas adecuados para llevar a cabo tales tareas con un coste computacional bajo pero con una alta precisión en el reconocimiento de personas. Por último, este sistema es evaluado acorde a la norma estándar ISO/IEC 19795 considerando seis bases de datos públicas. En relación al método de detección de estrés, esta tesis propone un sistema basado en dos señales fisiológicas, concretamente la tasa cardiaca y la conductancia de la piel, así como la creación de un innovador patrón de estrés que recoge el comportamiento de ambas señales bajo las situaciones de estrés y no-estrés. Además, este sistema está basado en lógica difusa para decidir el grado de estrés de un individuo. En general, este sistema es capaz de detectar estrés de forma precisa y en tiempo real, proporcionando una solución adecuada para sistemas biométricos actuales, donde la aplicación del sistema de detección de estrés es directa para evitar situaciónes donde los individuos sean forzados a proporcionar sus datos biométricos. Finalmente, esta tesis incluye un estudio de aceptabilidad del usuario, donde se evalúa cuál es la aceptación del usuario con respecto a la técnica biométrica propuesta por un total de 250 usuarios. Además se incluye un prototipo implementado en un dispositivo móvil y su evaluación. ABSTRACT: This thesis proposes a hand biometric system oriented to unconstrained and contactless scenarios together with a stress detection method able to elucidate to what extent an individual is under stress based on physiological signals. Concerning the biometric system, this thesis contributes with the design and implementation of a hand-based biometric system, where the acquisition is carried out without contact and the template is created only requiring information from a single individual. In addition, this thesis proposes an algorithm based on multiscale aggregation in order to tackle with the problem of segmentation in real unconstrained environments. Furthermore, feature extraction and matching are also a specific contributions of this thesis, providing adequate schemes to carry out both actions with low computational cost but with certain recognition accuracy. Finally, this system is evaluated according to international standard ISO/IEC 19795 considering six public databases. In relation to the stress detection method, this thesis proposes a system based on two physiological signals, namely heart rate and galvanic skin response, with the creation of an innovative stress detection template which gathers the behaviour of both physiological signals under both stressing and non-stressing situations. Besides, this system is based on fuzzy logic to elucidate the level of stress of an individual. As an overview, this system is able to detect stress accurately and in real-time, providing an adequate solution for current biometric systems, where the application of a stress detection system is direct to avoid situations where individuals are forced to provide the biometric data. Finally, this thesis includes a user acceptability evaluation, where the acceptance of the proposed biometric technique is assessed by a total of 250 individuals. In addition, this thesis includes a mobile implementation prototype and its evaluation.

Influence of loudspeaker directivity and measurement geometry on direct acoustic levels over façades for acoustic insulation tests with the International Standard ISO 140-5

The International Standard ISO 140-5 on field measurements of airborne sound insulation of façades establishes that the directivity of the measurement loudspeaker should be such that the variation in the local direct sound pressure level (ΔSPL) on the sample is ΔSPL < 5 dB (or ΔSPL < 10 dB for large façades). This condition is usually not very easy to accomplish nor is it easy to verify whether the loudspeaker produces such a uniform level. Direct sound pressure levels on the ISO standard façade essentially depend on the distance and directivity of the loudspeaker used. This paper presents a comprehensive analysis of the test geometry for measuring sound insulation and explains how the loudspeaker directivity, combined with distance, affects the acoustic level distribution on the façade. The first sections of the paper are focused on analysing the measurement geometry and its influence on the direct acoustic level variations on the façade. The most favourable and least favourable positions to minimise these direct acoustic level differences are found, and the angles covered by the façade in the reference system of the loudspeaker are also determined. Then, the maximum dimensions of the façade that meet the conditions of the ISO 140-5 standard are obtained for the ideal omnidirectional sound source and the piston radiating in an infinite baffle, which is chosen as the typical radiation pattern for loudspeakers. Finally, a complete study of the behaviour of different loudspeaker radiation models (such as those usually utilised in the ISO 140-5 measurements) is performed, comparing their radiation maps on the façade for searching their maximum dimensions and the most appropriate radiation configurations.

Analysis of the performance of caissons with a yard and cylindrical geometry as a breakwater. Apollonius caisson

En el presente trabajo se analiza el cajón Apolonio como diseño conceptual para controlar la reflexión en monolitos de gravedad sometidos a esfuerzos dinámicos de oleaje.

Mathematical Analysis of the Effect of Rotor Geometry on Cup Anemometer Response

The calibration coefficients of two commercial anemometers equipped with different rotors were studied. The rotor cups had the same conical shape, while the size and distance to the rotation axis varied.The analysis was based on the 2-cup positions analytical model, derived using perturbation methods to include second-order effects such as pressure distribution along the rotating cups and friction.Thecomparison with the experimental data indicates a nonuniformdistribution of aerodynamic forces on the rotating cups, with higher forces closer to the rotating axis. The 2-cup analytical model is proven to be accurate enough to study the effect of complex forces on cup anemometer performance.

Optimal boundary geometry in an elasticity problem: a systematic adjoint approach

In different problems of Elasticity the definition of the optimal gcometry of the boundary, according to a given objective function, is an issue of great interest. Finding the shape of a hole in the middle of a plate subjected to an arbitrary loading such that the stresses along the hole minimizes some functional or the optimal middle curved concrete vault for a tunnel along which a uniform minimum compression are two typical examples. In these two examples the objective functional depends on the geometry of the boundary that can be either a curve (in case of 2D problems) or a surface boundary (in 3D problems). Typically, optimization is achieved by means of an iterative process which requires the computation of gradients of the objective function with respect to design variables. Gradients can by computed in a variety of ways, although adjoint methods either continuous or discrete ones are the more efficient ones when they are applied in different technical branches. In this paper the adjoint continuous method is introduced in a systematic way to this type of problems and an illustrative simple example, namely the finding of an optimal shape tunnel vault immersed in a linearly elastic terrain, is presented.

Pietilä: El proyecto de Dipoli

Dipoli es un edificio plurifuncional localizado en el campus de Otaniemi que acoge los servicios generales del alumnado. Tanto encargo como propiedad pertenecía, hasta 2013, a la Asociación de Estudiantes de Helsinki University of Technology TKK (actualmente conocida como Aalto University), cuando se vendió y traspasó a la propia universidad. La tesis estudia este proyecto (1961-66) como uno de los ejemplos más significativos de la obra de los arquitectos Reima (1923-93)y Raili Pietilä (1926-), quienes se unieron tanto personal como profesionalmente el mismo año de la convocatoria del concurso (1961). Debido a la dificultad del encargo por la dimensión y flexibilidad de los espacios requeridos, el primer premio quedó desierto puesto que ninguna propuesta cumplía con todos los requisitos establecidos. El jurado otorgó el segundo premio a su proyecto junto con Osmo Lappo y solicitó posteriormente a ambos un desarrollo más profundo del mismo. Finalmente optaron por construir el edificio planteado por los Pietilä. En él debía desarrollarse un amplio abanico de actividades sociales como reuniones, entretenimiento nocturno, actuaciones, proyecciones de películas, cenas y bailes, así como servir de comedor durante los meses de invierno y espacio destinado a congresos en la época estival. Además, en dicho edificio se pretendía acoger el Sindicato de Estudiantes de la Universidad Tecnológica de Helsinki y se localizaría en el nuevo campus de Otaniemi a escasos kilómetros de la capital, donde Alvar Aalto ya estaba diseñando varios equipamientos universitarios siguiendo el planeamiento general que proyectó en el concurso de 1949. El elemento más característico de este proyecto es la cubierta, una estructura continua formada a partir de un caparazón hueco de hormigón in situ capaz de absorber dos lenguajes diferentes y generar, bajo ella, un espacio singular con multitud de posibilidades funcionales. Su geometría permite dividir el programa en estancias de menor tamaño sin perder ni la identidad ni unidad formal. La manera en que se iluminan los espacios bajo ella se consigue de formas diferentes: si bien la volumetría de líneas cartesianas presenta un sistema de aperturas longitudinales por donde penetra la luz cenital, en la forma más libre aparecen un conjunto de lucernarios de diferente tamaños y posiciones aparentemente aleatorias que introducen la luz natural por el plano del techo de forma más controlada, apoyada por la disposición de las ventanas perimetrales. El juego de espesores de la cubierta ofrece un conjunto de matices que pretenden resolver los tres condicionantes principales del proyecto, la adecuación de los usos en su interior, la compatibilidad de circulaciones de los usuarios y la inserción en el lugar. La percepción de este plano horizontal atraviesa lecturas múltiples, desde su uso primario de cubrición y cuya distancia con el plano del suelo se comprime para tensionar la grieta de luz al tiempo que ofrece nuevas relaciones con el paisaje hasta convertirse en fachada al apoyarse en el suelo y crear un límite físico entre interior y exterior. El objetivo fundamental de la tesis es entender mejor la traza particular de Dipoli desde una visión rigurosa que amplíe el conocimiento del edificio y al mismo tiempo explique el espacio propuesto a través de las diferentes herramientas de proyecto. Para ello se ha elaborado una documentación de la obra que parte de recopilar, seleccionar y redibujar la información existente desde el estado previo a la construcción del objeto terminado. El sentido de volver al Centro de Estudiantes de Otaniemi, supone, además de ayudar a comprender el trabajo de sus autores, entender el proceso de la historia de la arquitectura finlandesa y detectar relaciones con otras obras más lejanas con las que pudiese compartir ciertos valores, facilitando un entendimiento más global de la historia. Esta investigación se inicia desde la hipótesis que la forma final del edificio y su relación con el lugar, para proponer un tipo de arquitectura que confía en la observación sensible del programa, del uso, de las escalas de los espacios, del movimiento de las personas y su relación y anclaje con el lugar. Y en este sentido, el trabajo se desarrolla guiado por estos aspectos que se manifiestan también desde la influencia y comprensión de otros trabajos propios y ajenos. Para detectar las claves de proyecto que les han permitido la construcción espacial y formal de su arquitectura, entendiendo éstas como el conjunto de herramientas y mecanismos que reflexionan sobre una particular composición volumétrica y espacios dinámicos que ofrecen un aspecto exterior expresivo, la tesis se articula sobre dos capítulos principales “Contextos” y “Proyecto y Construcción” donde se quiere estudiar el proyecto en su forma más completa. Esta pareja de apartados aborda la descripción del marco temporal, físico, cultural, personal y profesional de los arquitectos, el análisis y síntesis de la propuesta y, por último, la repercusión del proyecto. Contextos pretende ubicar la obra además de facilitar la comprensión del conjunto de aspectos y condicionantes que determinaron la materialización de Dipoli. Este capítulo se subdivide a su vez en cinco apartados: Contexto Histórico, Físico y Cultural, Personal, Profesional e Incidencia de Dipoli. El Contexto histórico se centra en la descripción pormenorizada del conjunto de situaciones que influyen en el arquitecto cuando se toman decisiones durante el proceso de proyectar. El objetivo es definir los condicionantes que pueden haber afectado directa o indirectamente la obra. El capítulo comienza subrayando los temas de interés comunes para el resto de sus homólogos finlandeses. Principalmente se centra en la década de 1950 como etapa previa a la gestación de Dipoli. También atiende el proceso de evolución de la arquitectura finlandesa desde finales del S.XIX unido a la crisis de identidad nacional que el maestro Alvar Aalto superará por sus obras pero también por su personalidad y supondrá una gran sombra al resto de sus compañeros en el marco nacional e internacional provocando una reacción contraria a sus proyectos y persona entre el resto de arquitectos. Por este motivo, al tiempo que se gestaba el proyecto de Dipoli emergieron un grupo de profesionales que defendían fuertemente las trazas cartesianas del racionalismo como Aulis Blomstedt o Juhani Pallasmaa y que consiguieron abrir una nueva perspectiva intelectual. Por tanto será inevitable que la presencia del maestro nórdico Alvar Aalto aparezca a lo largo de toda la tesis, permitiéndonos un mejor entendimiento de la carga orgánica y humana de sus trabajos desde la perspectiva de los Pietilä. Posteriormente este capítulo desgrana aquellos intereses que dominaban el marco arquitectónico internacional y que pudieron influir en las soluciones planteadas. Dipoli será puesto en relación a diversas arquitecturas contemporáneas que presentan un enfoque diferente al esbozado por el Movimiento Moderno y cuyo marco de referencias guarda algún tipo de relación con los mismos temas de proyecto. Es el caso del grupo Team 10 o determinados ejemplos de arquitectos alemanes como Hugo Häring y Hans Scharoun, incluso puntos en común con el sistema constructivista del vanguardismo soviético. Estas relaciones con otras arquitecturas matizan su carácter singular e incluso se revisa en qué medida esta propuesta amplifica los aspectos que comparten. En cuanto al Contexto físico y cultural, una primera aproximación al ámbito donde el edificio se sitúa nos revela las características generales de un lugar claramente diferente a la ubicación del resto de edificios del campus. A continuación se adentra en el origen del nuevo centro universitario desde el planeamiento urbanístico de Alvar Aalto y revela tanto la forma de disponer las construcciones como las propuestas que el maestro había desarrollado con anterioridad a la convocatoria del concurso. Además aquí se destacan aquellos aspectos que propiciaron la elección del solar. Prosigue adentrándose en el programa propuesto por el jurado –entre cuyos miembros se encontraba el propio Aalto- y el análisis de las propuestas presentadas por cada uno de los arquitectos que obtuvieron una mención. Por último, se estudian y definen las obras más relevantes localizadas en el entorno físico del proyecto y que existían con anterioridad, destacando principalmente el trabajo de los Siren (Heikki y Kaija) y Alvar Aalto por los motivos desarrollados en el punto anterior. Prosigue con el Contexto Personal donde se seleccionan de datos biográficos que expliquen, en parte, las circunstancias personales que perfilaron su manera de entender la arquitectura y que consecuentemente influyeron en su camino intelectual hasta llegar a Dipoli. A continuación se indaga en la relación profesional y personal con Raili Paatelainen para establecer en qué medida participaron ambos en la propuesta. Este apartado concluye con el estudio de la etapa docente que profundiza en los temas de proyecto que Pietilä presentaba a los alumnos en sus clases de proyectos. En el proceso de comprensión de la evolución teórica y proyectual de los arquitectos se considera imprescindible la revisión de otros edificios propios que se enmarcan en el Contexto profesional. Éstos forman parte de la etapa de mayor actividad del estudio como son el Pabellón de Finlandia para la Exposición de Bruselas (1956-58), la Iglesia de Kaleva en Tampere (1959-66) y el Pabellón Nórdico para la Bienal de Venecia de 1960. Se completa la visión de estos tres ejemplos previos a Dipoli desde las investigaciones teóricas que realizó de forma paralela y que se difundieron a través de varias exposiciones. Nos centraremos en aquellas tres que fueron más relevantes en la madurez del arquitecto (Morfología y Urbanismo, La Zona y Estudios Modulares) para establecer relaciones entre unos aspectos y otros. En esta sección no se pretende realizar un análisis en profundidad, ni tampoco recoger la mayor parte de la obra de los Pietilä, sino más bien revelar los rasgos más significativos que faciliten el entendimiento de los valores anteriormente mencionados. Por último, Incidencia de Dipoli se refiere a la repercusión del edificio durante su construcción y finalización. Desde esta premisa, recoge el conjunto de críticas publicadas en las revistas de mayor difusión internacional que decidieron mostrar la propuesta además desde el propio interés del proyecto, por tratarse de un arquitecto reconocido internacionalmente gracias a la repercusión que obtuvieron sus proyectos anteriores. Se analiza el contenido de los artículos para establecer diversos encuentros con el capítulo Contextos y con los propios escritos de Pietilä. También se recogen las opiniones de críticos relevantes como Kenneth Frampton, Bruno Zevi o Christian Norberg-Schulz, destacando aquellos aspectos por los que mostraron un interés mayor. También se recoge y valora la opinión de sus homólogos finlandeses y que contradictoriamente se sitúa en el polo opuesto a la del juicio internacional. Se adentra en las situaciones complejas que propició el rechazo del edificio al desvincularse por completo de la corriente racionalista que dominaba el pensamiento crítico finés unido a la búsqueda de nuevas alternativas proyectuales que les distanciase del éxito del maestro Alvar Aalto. Pretende esclarecer tanto la justificación de dichos comentarios negativos como los motivos por los cuales Reima y Raili no obtuvieron encargos durante casi diez años, tras la finalización de Dipoli. Nos referiremos también a la propia opinión de los arquitectos. Para ello, en el apartado Morfología Literal se recoge el texto que Reima Pietilä publicó en el número 9 de la revista Arkkitehti para contrarrestar las numerosas críticas recibidas. Se subraya aquellos aspectos de proyecto que inciden directamente en la percepción y razón de ser de la propuesta. Por último, se manifiesta la valoración crítica de dos personas muy próximas al entorno personal y profesional de los Pietilä: Roger Connah y Malcolm Quantrill. Ambas figuras son las que han adentrado en el trabajo de los arquitectos con mayor profundidad y aportado una visión más completa del contexto arquitectónico de Finlandia en el s.XX. Se han interesado principalmente por el conocimiento morfológico que les ha llevado a la observación de los fenómenos de la naturaleza. Se apunta también la falta de objetividad de sus opiniones originadas en parte por haber colaborado profesionalmente y ser amigo íntimo de la familia respectivamente. El valor de la documentación aportada por ambos reside principalmente en la fiel transmisión de las explicaciones del propio Pietilä. El último capítulo Proyecto y Construcción engloba tanto la descripción exhaustiva del proyecto como el análisis de la obra. Al tiempo que se explica la propuesta, se establecen continuamente relaciones y paralelismos con otras arquitecturas que ayudan a entenderla. Para ello, se establecen tres apartados elementales: “El lugar”, “Programa y geometrías” y “Presencia y materialidad física” y se pretende identificar aquellas herramientas de proyecto en las que confía para la materialización de la obra al tiempo que se profundiza en la evolución de la propuesta. En cuanto a El lugar, se describe de manera pormenorizada el recorrido hasta alcanzar el edificio y cómo la mirada atenta de la naturaleza que lo rodea está continuamente presente en todos los dibujos de la propuesta. Se realiza un estudio tanto de la multiplicidad de accesos como del vacío existente en planta baja que forma parte del espacio público y que atraviesa el edificio diagonalmente. Desde aquí se evaluará los espacios intermedios existentes que matizan los ámbitos donde se desarrolla cada una de las actividades. A continuación se enfoca el estudio de la ventana como elemento relevante en la transición de espacios interiores y exteriores para posteriormente adentrarnos en la importancia de los recorridos en la planta superior y cómo las salas polivalentes se acomodan a estos. Programas y geometrías explica la solución y desarrollo de la propuesta a través de los tanteos de la planta. Detecta simultáneamente aquellos aspectos que aparecen en otros proyectos y que pueden haber influido en el desarrollo de la obra. Una vez que han sido estudiados los dos niveles se introduce la sección para analizar las conexiones entre ambos planos, destacando los tipos de escaleras y accesos que propician la multiplicidad de recorridos y en consecuencia el movimiento de las personas. En el último apartado se identifica la geometría de la estructura a través de la descripción formal de la cubierta y sus apoyos en planta para conocer cómo responde el volumen definitivo a la adecuación de los usos. El carácter del edificio a través del empleo de los materiales y las técnicas de construcción utilizadas se indaga desde la Materialidad física. Este punto de vista esclarece temas de proyecto como la relación multisensorial de Dipoli y el concepto del tiempo relacionado con espacios de carácter dinámico o estático. Una vez se ha realizado un análisis de la obra construida a través de sus recorridos, se plantea un último regreso al exterior para observar la presencia del edificio a través de su tamaño, color y texturas. Este apartado nos mostrará la mirada atenta a la escala del proyecto como vector de dirección que pretende encontrar la inserción adecuada del edificio en el lugar, cerrando el proceso de proyecto. El motivo de desarrollar esta tesis en torno a Dipoli se apoya en su consideración como paradigma de una arquitectura que confía en la observación sensible del programa, uso, las escalas de los espacios, circulaciones y su relación y anclaje con el lugar como argumentos fundamentales de proyecto, cuya realidad concreta consigue situar la propuesta en el marco histórico de la arquitectura nórdica e internacional. Además la distancia histórica desde mundo actual respecto a la década de los años 60 del s.XX nos permite entender el contexto cultural donde se inserta Dipoli que continúa nuestra historia reciente de la arquitectura y concibe la obra construida como una extensión de nuestro mundo contemporáneo. Por ello se valora el proyecto desde la mirada hacia atrás que analiza las diferencias entre la realidad construida y las intenciones de partida. Esta revisión dotada de una distancia crítica nos permite adentrarnos en la investigación de manera objetiva. Igualmente presenta una distancia histórica (referida al tiempo transcurrido desde su construcción) y socio-cultural que favorece la atenuación de prejuicios y aspectos morales que puedan desviar una mirada analítica y se alejen de una valoración imparcial. Dipoli, enmarcada en dicho periodo, mantiene la capacidad crítica para ser analizada. ABSTRACT The dissertation defends Dipoli ( 1961-1966 ) as one of the most significant examples of the Reima ( 1923-1993 ) Raili Pietilä (1926 -), who joined both personally and professionally the same year of the project´s competition (1961). Due to the difficulty of the commission by the size and flexibility of the required areas, there was not first prize awarded because none of the submitted proposals met all the requirements. The jury awarded Dipoli with second prize together with a competing scheme by Osmo Lappo. The board subsequently asked for a further development of both proposals and finally selected the one by Pietilä. The completed project allows a wide range of social activities such as meetings, night entertainment, performances, film screenings, dinners and dance to take place while the facility can also serve as a dining hall during winter months and conference center in the summer when necessary. In addition, the building was intended to house the Helsinki University of Technology (now Aalto University) Student Union. The University, at the time being designed by Alvar Aalto following his successful entry to the master plan competition in 1949, was located a few kilometers from the capital on the new campus in Otaniemi. The most characteristic element of the project is its roof which can be described as a continuous form achieved an in-situ concrete cavity structure that can modulate two different geometric languages and generate a singular space under it. The building is, in general terms, an unique shell space with many functional possibilities. Its geometry allows the program to split its functions into smaller sizes without losing the identity or formal unity of the general object. The way in which the spaces are illuminated is solved in two different ways. First, while the Cartesian-line volume presents a series of longitudinal openings into which natural light penetrates, the free-form volume shows a set of skylights in apparently random positions that vary in size and that introduce natural light through the roof in a more controlled manner. In addition the perimeter openings are present that relate directly to the nature that surrounds the building. The adaptable thickness of the roof provides a set of solutions that resolve the three main issues of the project: the adequacy of the functions in the interior areas, the complex capability for user flows and circulation and the manner in which the building is inserted in its context. The perception of the roof´ horizontal plane offers multiple interpretations, from its primary use as a primitive cover whose distance from the ground compresses the void and creates a light tension, to the new relationships with the landscape where by the roof becomes a façade cladding and rests directly on the ground to create a physical boundary between interior and exterior. The main scope of this research is to better understand the particular trace of Dipoli from a rigorous architectural view to deep into the knowledge of the building and, at the same time, to explain the space through a series of project design tools that have been used. For this reason, an accurate documentation has arisen from collecting, selecting and redrawing the existing information from the sketching stage to the built object. A through reanalysis of the Otaniemi Student Center therefore provides not only a more complete understanding of the work of the architects, but also leads to a better comprehension of the history of Finnish architecture, which is related to other cultural relationships and which shares certain architectural values which a more comprehensive understanding of general architectural history. This research starts from the working hypothesis that the final shape of the building and its relationship to its place created a type of architecture that relies on a sensitive observation of the program, the use of varying scales of space, the movement and flow of people and finally the coexistence with the natural context. In this sense, the work is developed based on those aspects that are also reflected in the influence of others architects by understanding both their own and other architects´ work. In order to obtain a personal reading of the project facts that allowed the architects construct Dipoli (understanding the facts as a set of tools and project mechanisms that are able to generate a particular volumetric composition and dynamic spaces that at the same time provide an expressive exterior), the research hinges on two main sections, "Contexts" and "Design and Construction", that study the project from all perspectives. This two parts address the description of temporal , physical , cultural , personal and professional framework, analysis and synthesis of the proposal and finally, the national and international influences on the project. Contexts seek to place the work and to facilitate the understanding of all aspects and conditions that led to the creation of Dipoli. This chapter is subdivided into five sections: Historical Context, Cultural and Physical, Personal, Professional and Dipoli Influences. Historical Context focuses on a detailed description of a set of precedents that influenced the architect when making decisions during design process. The objective is to define the conditions that could directly or indirectly shape the work. This chapter begins by highlighting issues of common interest to the rest its Finnish counterparts. The text is mainly focused on the 1950s as a prelude to Dipoli´s conception. It will also address the process of Finnish architecture from the late nineteenth century as linked to the national identity crisis that the great master Alvar Aalto overcame with both his works and personality, being a great drain on the rest of his colleagues. This aspect caused a reaction against Aalto and his projects. For this reason, at the time that Dipoli came into being a number of professionals who strongly defended the traces of Cartesian Rationalism, including Juhani Pallasmaa and Aulis Blomstedt emerged and brought a new intellectual perspective to the Finnish architecture scene. It is thus inevitable that the presence of Alvar Aalto will be apparent throughout the dissertation to allow a better understanding of the organizational and human character of their work from the Pietiläs´ perspective. Later, this chapter identifies those interests that dominated the international architectural framework that could have influenced Dipoli. The project will be placed in relation to various contemporary architectural works that were created using a different approach to that outlined by the Modern Movement. This is present in the case of Team 10 group and with specific examples of German architects including Hans Scharoun and Hugo Häring, as well as some commonalities with Soviet Constructivism. These relationships with other architecture qualify its singular character and even extend how this proposal amplifies those shared aspects. Physical and Cultural Context involves the unique site where the building is located which includes different features from the location of other buildings on the campus. IT then progresses into the origin of the new campus from the urban planning of Alvar Aalto and reveals both the setting and proposed constructions that Aalto had developed. This section also highlights the aspects that led to the choice of the site. I go deep into the program proposed by the jury (of whom Aalto was a member) and the analysis of the alternative proposals that received a special commendation. Finally, I study and define the most relevant works located near Dipoli, emphasizing primarily the work of the Sirens (Heikki and Kaija) and Alvar Aalto for the reasons developed in the previous section. I then proceed with the Personal Context, where a series of biographical data are selected to begin to explain the personal circumstances that outlined the Pietilas´ architectural understanding and consequently could have influenced their intellectual approach to design Dipoli. Then the text explores their professional and personal relationship to establish what extent they participated in the proposal. This section concludes with the study of the Reima Pietilä´s teaching period at Oulu that explores the issues he presented to his students there. In the process of understanding the Pietiläs´ theoretical and design evolution, it must be considered essential to study other buildings that are part of their professional context. These projects belong to the most active stage of their office and include the Finnish Pavilion for the World´s Fair in Brussels (1956-1958), Kaleva Church in Tampere (1959-1966) and the Nordic Pavilion at the 1960 Venice Biennale. We will complete the view of Dipoli from previous theoretical investigations performed in parallel that were spread through several exhibitions. We will focus on the three that were most relevant to the evolution of the architect (Morphology and Urbanism, the Zone, and Stick Studies) to establish a series of useful relationships. This section is not intended to be an in-depth analysis nor to collect most of the work of the Pietiläs´; but rather to reveal the most significant features that facilitate an understanding of the above values. Finally, Dipoli´s Impact refers to the influence of the building from many points of view during its construction and after its completion. It collects the reviews published in the world's most relevant magazines which had decided to show the alternate proposals, generally conceived of by internationally-renowned architects. I analyze the content of the articles in order to establish a series of parallels with the chapter Contexts and own writings Pietilä to clarify if main design directions were clear at that time. The views of relevant critics, including Kenneth Frampton, Bruno Zevi and Christian Norberg -Schulz, are also collected here. This episode also collects and assesses the views of these critics´ Finnish counterparts that generally stood at the opposite side of the international debate. It delves into the complex situation that led to the rejection of the building by the rationalists that dominated the Finnish critical thinking while searching for new alternatives to distance themselves from the Alvar Aalto´s success. It aims to clarify both the justification for these negative comments and the reasons why Reima and Raili not obtain a single commission for nearly ten years after the completion of Dipoli. From the critics we will approach the opinion of Reima Pietilä himself. To do this, in the Literal Morphology section we will see how the architect tried to defend his position. Those design tool that directly affected the perception of the proposal are provided through the figures of Roger Connah and Malcolm Quantrill. Finally, a critical –personal and professional- review of these two very close figures will take place. Despite knowing that both delved into the work of architects with greater depth and provided a complete view of the Finnish architectural context in 20th century, they have focused mainly morphological knowledge which has led to the observation of natural phenomena. It also notes the lack of objectivity in their views caused in part by, in the case of Connah, collaborating professionally and in that of Quantrill being a close friend of the Pietilä family. The value of the documentation provided by both resides mainly in the faithful transmission of the Pietiläs´ own explanations. The final chapter covers both Design and Construction and provides a comprehensive project description in order tofaithfully analyse the work. As the proposal is being explained, relationships of its built form are continuously linked to other architectural projects to gain a better understanding of Dipoli itself. To do this we have set three basic sections: "The Place", "Geometries & Function" and "Presence and Materiality. Construction process" that intended to identify those project tools for the realization of the work while deepens the proposal´s evolution. The Place describes how to approach and reach the building in detail and how the view out towards the surrounding natural setting is continuously shown in the proposal´s drawings. We will study both the multiplicity of entrances as well as the corridor downstairs as part of the public space that diagonally goes through the building. Then, the existing voids in the concrete cave for public activities will be evaluated. Lastly, the study will focus on the openings as a significant element in the transition from interior and exterior areas to describe the importance of the circulation on the second floor and how function is able to accommodate through the areas of void. Geometries & Function explains the final solution and the development of the proposal through the floor plan. Simultaneously it detects those aspects that appear in other projects and that may have influenced the development of the work. Once we have analyzed both levels –ground and second floor- section drawings come into the topic to study the connections between the two levels and highlighting the types of hierarchy for the multiple paths to organize the flows of people inside the building. In the last section the structural geometry is identified through the description of the form and how it responds to the final volumetrical settings. The character of the building through the use of materials and construction techniques inquires from Presence and Materiality. This point of view clarifies multisensory project issues as Dipoli relationship to the dynamic or static character or different spaces inside the building. Once the analysis has been made we will step back to a final return to the building´s exterior to analyze the presence of the building through its scale, colour and textures. This section emphasizes the project´s scale and orientation to find the proper insertion of the building in place. In short, this dissertation has been done by the idea that Pietiläs´special abilities were allowed from a sensitive observation of the program, the creation of a variety of special scales, dynamic circulation and the relating relationship with the project´s location as fundamental design tools. From this aspect, Dipoli could be more usefully framed in the historical context of Nordic and international architecture. The dissertation allows us to better understand the cultural context of the 1960s, in which Dipoli was established since it continues our recent architectural history. The final built form is conceived as an extension of our contemporary world. Therefore the project is assessed through the comparison of the architects´ intentions and the final completed project.

NURBS-Based Geometry Parameterization for Aerodynamic Shape Optimization

La motivación de esta tesis es el desarrollo de una herramienta de optimización automática para la mejora del rendimiento de formas aerodinámicas enfocado en la industria aeronáutica. Este trabajo cubre varios aspectos esenciales, desde el empleo de Non-Uniform Rational B-Splines (NURBS), al cálculo de gradientes utilizando la metodología del adjunto continuo, el uso de b-splines volumétricas como parámetros de diseño, el tratamiento de la malla en las intersecciones, y no menos importante, la adaptación de los algoritmos de la dinámica de fluidos computacional (CFD) en arquitecturas hardware de alto paralelismo, como las tarjetas gráficas, para acelerar el proceso de optimización. La metodología adjunta ha posibilitado que los métodos de optimización basados en gradientes sean una alternativa prometedora para la mejora de la eficiencia aerodinámica de los aviones. La formulación del adjunto permite calcular los gradientes de una función de coste, como la resistencia aerodinámica o la sustentación, independientemente del número de variables de diseño, a un coste computacional equivalente a una simulación CFD. Sin embargo, existen problemas prácticos que han imposibilitado su aplicación en la industria, que se pueden resumir en: integrabilidad, rendimiento computacional y robustez de la solución adjunta. Este trabajo aborda estas contrariedades y las analiza en casos prácticos. Como resumen, las contribuciones de esta tesis son: • El uso de NURBS como variables de diseño en un bucle de automático de optimización, aplicado a la mejora del rendimiento aerodinámico de alas en régimen transónico. • El desarrollo de algoritmos de inversión de punto, para calcular las coordenadas paramétricas de las coordenadas espaciales, para ligar los vértices de malla a las NURBS. • El uso y validación de la formulación adjunta para el calculo de los gradientes, a partir de las sensibilidades de la solución adjunta, comparado con diferencias finitas. • Se ofrece una estrategia para utilizar la geometría CAD, en forma de parches NURBS, para tratar las intersecciones, como el ala-fuselaje. • No existen muchas alternativas de librerías NURBS viables. En este trabajo se ha desarrollado una librería, DOMINO NURBS, y se ofrece a la comunidad como código libre y abierto. • También se ha implementado un código CFD en tarjeta gráfica, para realizar una valoración de cómo se puede adaptar un código sobre malla no estructurada a arquitecturas paralelas. • Finalmente, se propone una metodología, basada en la función de Green, como una forma eficiente de paralelizar simulaciones numéricas. Esta tesis ha sido apoyada por las actividades realizadas por el Área de Dinámica da Fluidos del Instituto Nacional de Técnica Aeroespacial (INTA), a través de numerosos proyectos de financiación nacional: DOMINO, SIMUMAT, y CORESFMULAERO. También ha estado en consonancia con las actividades realizadas por el departamento de Métodos y Herramientas de Airbus España y con el grupo Investigación y Tecnología Aeronáutica Europeo (GARTEUR), AG/52. ABSTRACT The motivation of this work is the development of an automatic optimization strategy for large scale shape optimization problems that arise in the aeronautics industry to improve the aerodynamic performance; covering several aspects from the use of Non-Uniform Rational B-Splines (NURBS), the calculation of the gradients with the continuous adjoint formulation, the development of volumetric b-splines parameterization, mesh adaptation and intersection handling, to the adaptation of Computational Fluid Dynamics (CFD) algorithms to take advantage of highly parallel architectures in order to speed up the optimization process. With the development of the adjoint formulation, gradient-based methods for aerodynamic optimization become a promising approach to improve the aerodynamic performance of aircraft designs. The adjoint methodology allows the evaluation the gradients to all design variables of a cost function, such as drag or lift, at the equivalent cost of more or less one CFD simulation. However, some practical problems have been delaying its full implementation to the industry, which can be summarized as: integrability, computer performance, and adjoint robustness. This work tackles some of these issues and analyse them in well-known test cases. As summary, the contributions comprises: • The employment of NURBS as design variables in an automatic optimization loop for the improvement of the aerodynamic performance of aircraft wings in transonic regimen. • The development of point inversion algorithms to calculate the NURBS parametric coordinates from the space coordinates, to link with the computational grid vertex. • The use and validation of the adjoint formulation to calculate the gradients from the surface sensitivities in an automatic optimization loop and evaluate its reliability, compared with finite differences. • This work proposes some algorithms that take advantage of the underlying CAD geometry description, in the form of NURBS patches, to handle intersections and mesh adaptations. • There are not many usable libraries for NURBS available. In this work an open source library DOMINO NURBS has been developed and is offered to the community as free, open source code. • The implementation of a transonic CFD solver from scratch in a graphic card, for an assessment of the implementability of conventional CFD solvers for unstructured grids to highly parallel architectures. • Finally, this research proposes the use of the Green's function as an efficient paralellization scheme of numerical solvers. The presented work has been supported by the activities carried out at the Fluid Dynamics branch of the National Institute for Aerospace Technology (INTA) through national founding research projects: DOMINO, SIMUMAT, and CORESIMULAERO; in line with the activities carried out by the Methods and Tools and Flight Physics department at Airbus and the Group for Aeronautical Research and Technology in Europe (GARTEUR) action group AG/52.

Tridimensional simulation of the speed, pressure and turbulence fields of the air flow on the geometry of a freight truck inside a wind tunnel

This study shows the air flow behavior through the geometry of a freight truck inside a AF6109 wind tunnel with the purpose to predict the speed, pressure and turbulence fields made by the air flow, to decrease the aerodynamic resistance, to calculate the dragging coefficient, to evaluate the aerodynamics of the geometry of the prototype using the CFD technique and to compare the results of the simulation with the results obtained experimentally with the “PETER 739 HAULER” scaled freight truck model located on the floor of the test chamber. The Geometry went through a numerical simulation process using the CFX 5,7. The obtained results showed the behavior of the air flow through the test chamber, and also it showed the variations of speed and pressure at the exit of the chamber and the calculations of the coefficient and the dragging force on the geometry of the freight truck. The evaluation of the aerodynamics showed that the aerodynamic deflector is a device that helped the reduction the dragging produced in a significant way by the air. Furthermore, the dragging coefficient and force on the prototype freight truck could be estimated establishing an incomplete similarity.

Soil aggregate geometry: Measurements and morphology

Aggregates provide physical microenvironments for microorganisms, the vital actors of soil systems, and thus play a major role as both, an arena and a product of soil carbon stabilization and dynamics. The surface of an aggregate is what enables exchange of the materials and air and water fluxes between aggregate exterior and interior regions. We made use of 3D images from X-ray CT of aggregates and mathematical morphology to provide an exhaustive quantitative description of soil aggregate morphology that includes both intra-aggregate pore space structure and aggregate surface features. First, the evolution of Minkowski functionals (i.e. volume, boundary surface, curvature and connectivity) for successive dilations of the solid part of aggregates was investigated to quantify its 3D geometrical features. Second, the inner pore space was considered as the object of interest. We devised procedures (a) to define the ends of the accessible pores that are connected to the aggregate surface and (b) to separate accessible and inaccessible porosity. Geometrical Minkowski functionals of the intra-aggregate pore space provide the exhaustive characterization of the inner structure of the aggregates. Aggregates collected from two different soil treatments were analyzed to explore the utility of these morphological tools in capturing the impact on their morphology of two different soil managements, i.e. conventional tillage management, and native succession vegetation treatment. The quantitative tools of mathematical morphology distinguished differences in patterns of aggregate structure associated to the different soil managements.

The interspecific mass–density relationship and plant geometry

We present an a priori theoretical framework for the interspecific allometric relationship between stand mass and plant population density. Our model predicts a slope of −\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \setlength{\oddsidemargin}{-69pt} \begin{document} \begin{equation*}\frac{1}{3}\end{equation*}\end{document} between the logarithm of stand mass and the logarithm of stand density, thus conflicting with a previously assumed slope of −½. Our model rests on a heuristic separation of resource-limited living mass and structural mass in the plant body. We point out that because of similar resource requirements among plants of different sizes, a nonzero plant mass–density slope is primarily defined by structural mass. Specifically, the slope is a result of (i) the physical size-dependent relationship between stem width and height, (ii) foliage-dependent demands of conductance, and (iii) the cumulative nature of structural mass. The data support our model, both when the potential sampling bias of taxonomic relatedness is accounted for and when it is not. Independent contrasts analyses show that observed relationships among variables are not significantly different from the assumptions made to build the model or from its a priori predictions. We note that the dependence of the plant mass–density slope on the functions of structural mass provides a cause for the difference from the zero slope found in the animal population mass–density relationship; for the most part, animals do not have a comparable cumulative tissue type.