The Effect of Preservative Interventions on the Chemical- Physical and Structural Characteristics of Panel Painting

This work studies the impact of two traditional Romanian treatments, Red Petroleum and Propolis, in terms of real efficiency and consequence on the wooden artifacts. The application of these solutions is still a widely adopted and popular technique in preservative conservation but the impact of these solutions is not well known. It is important to know the effect of treatments on chemical-physical and structural characteristics of the artifacts, not only for understanding the influence on present conditions but also for foreseeing the future behavior. These treatments with Romanian traditional products are compared with a commercial antifungal product, Biotin R, which is utilized as reference to control the effectiveness of Red Petroleum and Propolis. Red Petroleum and Propolis are not active against mould while Biotin R is very active. Mould attack is mostly concentrated in the painted layer, where the tempera, containing glue and egg, enhance nutrition availability for moulds. Biotin R, even if is not a real insecticide but a fungicide, was the most active product against insect attack of the three products, followed by Red Petroleum, Propolis and untreated reference. As for colour, it did not change so much after the application of Red Petroleum and Biotin R and the colour difference was almost not perceptible. On the contrary, Propolis affected the colour a lot. During the exposure at different RH, the colour changes significantly at 100% RH at equilibrium and this is mainly due to the mould attack. Red Petroleum penetrates deeply into wood, while Propolis does not penetrate and remains only on the surface. However, Red Petroleum does not interact chemically with wood substance and it is easy volatilized in oven-dry condition. On the contrary Propolis interacts chemically with wood substance and hardly volatilized, even in oven-dry condition and consequently Propolis remains where it penetrated, mostly on the surface. Treatment by immersion has impact on wood physical parameters while treatment by brushing does not have significant impact. Especially Red Petroleum has an apparent impact on moisture content (MC) due to the penetration of solution, while Propolis does not penetrate so much and remains only on surface therefore Propolis does not have so much impact as Red Petroleum. However, if the weight of the solution penetrated in wood is eliminated, there is not significant difference in MC between treated and untreated samples. Considering physical parameters, dimensional stability is an important parameter. The variation of wood moisture content causes shrinkages/swelling of the wood that polychrome layer can only partially follow. The dimension of wooden supports varied under different moisture conditioning; the painted layer cannot completely follow this deformation, and consequently a degradation and deterioration caused by detachment, occurs. That detachment affects the polychrome stratification of the panel painting and eventually the connections between the different layer compositions of the panel painting.

Evidenza del coinvolgimento di geni nell'insorgenza delle schisi labio-palatine

The CL/P are the most common and easily recognizable craniofacial malformations with a complex etiology that requires the involvement of genetic and environmental components. The analysis of the genetic component shows more than 14 loci and genes involved in the onset of the disease. I’ve selected and investigated some of the possible candidate genes for CL/P. MYH14 gene, that maps on chromosome 19, on the OFC3 locus, and shows a strong homology with MYH9 gene. I’ve also investigated TP63 and MID1 genes, that are responsible respectively for EEC syndrome and Opitz syndrome, both of them presenting cleft. I’ve also decided to investigate JAG2 because TP63 product regulates the this gene, and both of them are component of the Notch signalling pathway. I’ve, also, studied the MKX and LMO4 genes. MKX is an important development regulator that is highly expressed in palatal mesenchyme, and map in the region responsible for Twirler mutation that cause cleft in mouse. LMO4 is necessary for neural tube development and cooperating with Grhl3, promotes cellular migration during morphogenetic events like “in utero” cleft healing. Low folate levels and high levels of homocysteine increase the risk of cleft, genes involved in their metabolism may be of interest in cleft occurrence. I’ve decided to investigate BHMT and CBS genes coding for enzymes involved in homocysteine metabolism. I’ve also investigated BHMT2 gene that maps close to BHMT and presents with him a 73% of homology. I’ve performed a linkage analysis using SNPs mapping in the genes and their boundaries, for each gene, for MKX and LMO4 I’ve also performed a sequencing analysis. My results for MID1 and CBS genes support the hypothesis of a possible role of these genes in cleft. I’ve found borderline association values for JAG2, MKX and LMO4 genes.

Caratteristiche ortopediche-ortodontiche in pazienti affetti da Sindrome di Nooan

La sindrome di Noonan (SN) è una patologia a trasmissione autosomica dominante caratterizzata da bassa statura, difetti cardiaci congeniti, dismorfia facciale. In letteratura sono stati pubblicati pochi case reports riguardanti le condizioni orali-facciali in pazienti affetti da SN. Obiettivo. Individuare patologie di pertinenza ortopedico-ortodontica caratteristiche della sindrome utilizzando un campione di pazienti con diagnosi di SN. Metodi. Un gruppo di 10 pazienti affetti da SN è stato sottoposto a esame obiettivo extraorale ed intraorale, ortopantomografia, teleradiografia latero-laterale, impronte delle arcate dentarie. Le misurazioni sulle TLL sono state effettuate sulla base dell'analisi MBT; i valori palatali provengono dai modelli di studio dell’arcata superiore. È stata utilizzato il test t-Student per mettere a confronto il gruppo di studio e il gruppo di controllo riguardo le misure cefalometriche e i valori palatali. Risultati. Nel gruppo di studio sono state rilevate anomalie di numero (un dente deciduo soprannumerario e una agenesia di un dente permanente). Il test t-Student rivela differenze statisticamente significative per 7 variabili cefalometriche su 13 e per 2 variabili palatali. Conclusioni. Basandosi su questo studio è possibile concludere che i pazienti con SN mostrano II classe scheletrica di tipo mandibolare, crescita iperdivergente, tendenza al morso aperto scheletrico, palatoversione degli incisivi superiori, palato stretto. Questi risultati possono fornire informazioni utili sia per la diagnosi di SN sia per la pianificazione del corretto trattamento ortodontico.

Corrosione atmosferica in area urbana-costiera di un acciaio Cor-Ten: studio del rilascio in ambiente dei metalli di lega

Cor-Ten is a particular kind of steel, belonging to low-alloyed steel; thanks to his aesthetic features and resistance to atmospheric corrosion, this material is largely used in architectural, artistic and infrastructural applications. After environmental exposure, Cor-Ten steel exhibits the characteristic ability to self-protect from corrosion, by the development of a stable and adherent protective layer. However, some environmental factors can influence the formation and stability of the patina. In particular, exposure of Cor-Ten to polluted atmosphere (NOx, SOx, O3) or coastal areas (marine spray) may cause problems to the protective layer and, as a consequence, a release of alloying metals, which can accumulate near the structures. Some of these metals, such as Cr and Ni, could be very dangerous for soils and water because of their large toxicity. The aim of this work was to study the corrosion behavior of Cor-Ten exposed to an urban-coastal site (Rimini, Italy). Three different kinds of commercial surface finish (bare and pre-patinated, with or without a beeswax covering) were examined, both in sheltered and unsheltered exposure conditions. Wet deposition brushing the specimens surface (leaching solutions) are monthly collected and analyzed to evaluate the extent of metal release and the form in which they leave the surface, for example, as water-soluble compounds or non-adherent corrosion products. Five alloying metals (Fe, Cu, Cr, Mn and Ni) and nine ions (Cl-, NO3-, NO2-, SO42-, Na+, Ca2+, K+, Mg2+, NH4+) are determined through Atomic Absorption Spectroscopy and Ion Chromatography, respectively. Furthermore, the evolution and the behaviour of the patina are periodically followed by surface investigations (SEM-EDS and Raman Spectroscopy). After two years of exposure, the results show that Bare Cor-Ten, cheaper than the other analyzed specimens, even though undergoes the greater mass variation, his metal release is comparable to the release of the pre-patinated samples. The behavior of pre-patinated steel, with or without beeswax covering, do not show particular difference. This exposure environment doesn’t allow a completely stabilization of the patina; nevertheless an estimate of metal release after 10 years of exposure points out that the environmental impact of Cor-Ten is very low: for example, the release of chromium in the soluble fraction is less than 10 mg if we consider an exposed wall of 10 m2.

Ergebnisse der Behandlung mit Kortikalisschrauben

Im Rahmen der vorliegenden Dissertation wurden 106 Minipins bei 62 Patienten (29 Männer und 33 Frauen)untersucht.rnÜberlebensrate betrug 76,4%. Misserfolge, die zum Verlust der Minipins führten wie Mukositis, Lockerung oder Wurzelperforation, stellten sich in 23,7 % (n=25) der Fälle ein. Dabei gingen beim Auftreten von Mukositis 9 von 14 (8,5 %), bei der Lockerung der Minischrauben 8 von 10 (7,5 %) der Minischrauben verloren. Eine Wurzelperforation trat in einem Fall auf. rnDie einzige lingual im Unterkiefer implantierte Schraube ging verloren. Implantation palatinal im Oberkiefer führte in zwei von vier Fällen zum Verlust. rnDie Sofortbelastung der kieferorthopädischen Kortikalisschrauben erscheint ein praktikables Belastungskonzept zu sein.rnDie Verlustraten bei der vestibulären Implantation betrugen 3,8 % (n=4) für den Oberkiefer und 15,1 % (n=16) für den Unterkiefer.rnBei der Implantation in befestigte bzw. unbefestigte Mukosa betrug die Überlebensrate entsprechend 83,3 % (n=72) und 62,3 % (n=22). rn

Profili di espressione genetica ed epigenetica ad impatto prognostico e predittivo nel carcinoma squamoso e nelle lesioni potenzialmente maligne del cavo orale

Il carcinoma squamoso orale (CSO) è spesso preceduto da lesioni definite potenzialmente maligne tra cui la leucoplachia e il lichen ma una diagnosi precoce avviene ancora oggi in meno della metà dei casi. Inoltre spesso un paziente trattato per CSO svilupperà secondi tumori. Scopo del lavoro di ricerca è stato: 1) Studiare, mediante metodica di next generation sequencing, lo stato di metilazione di un gruppo di geni a partire da prelievi brushing del cavo orale al fine di identificare CSO o lesioni ad alto rischio di trasformazione maligna. 2) Valurare la relazione esistente tra sovraespressione di p16INK4A e presenza di HPV in 35 pazienti affetti da lichen 3) Valutare la presenza di marker istopatologici predittivi di comparsa di seconde manifestazioni tumorali 4) valutare la relazione clonale tra tumore primitivo e metastasi linfonodale in 8 pazienti mediante 2 metodiche di clonalità differenti: l’analisi di mtDNA e delle mutazioni del gene TP53. I risultati hanno mostrato: 1) i geni ZAP70 e GP1BB hanno presentato un alterato stato di metilazione rispettivamente nel 100% e nel 90,9% di CSO e lesioni ad alto rischio, mentre non sono risultati metilati nei controlli sani; ipotizzando un ruolo come potenziali marcatori per la diagnosi precoce nel CSO. 2)Una sovraespressione di p16INK4A è risultata in 26/35 pazienti affetti da lichen ma HPV-DNA è stato identificato in soli 4 campioni. Nessuna relazione sembra essere tra sovraespressione di p16INK4A e virus HPV. 3)L’invasione perineurale è risultato un marker predittivo della comparsa di recidiva locale e metastasi linfonodale, mentre lo stato dei margini chirurgici si è rilevato un fattore predittivo per la comparsa di secondi tumori primitivi 4) Un totale accordo nei risultati c’è stato tra analisi di mtDNA e analisi di TP53 e le due metodiche hanno identificato la presenza di 4 metastasi linfonodali non clonalmente correlate al tumore primitivo.

Thickness of softened human enamel removed by toothbrush abrasion: an in vitro study

The aim of the study was to assess the thickness of softened enamel removed by toothbrushing. Human enamel specimens were indented with a Knoop diamond. Softening was performed with citric acid or orange juice. The specimens were brushed in a brushing machine with a manual soft toothbrush in toothpaste slurry or in artificial saliva. Enamel loss was calculated from the change in indentation depth of the same indent before and after abrasion. Mean surface losses (95% confidence interval) were recorded in treatment groups (in nanometers): (1) citric acid, abrasion with slurry = 339 (280-398); (2) citric acid, abrasion with artificial saliva = 16 (5-27); (3) orange juice, abrasion with slurry = 268 (233-303); (4) orange juice, abrasion with artificial saliva = 14 (5-23); (5) no softening, abrasion with slurry = 28 (10-46). The calculated thickness of the softened enamel varied between 254 and 323 nm, depending on the acid used.

Craniofacial morphology in complete unilateral cleft lip and palate patients consecutively treated with 1-stage repair of the cleft

OBJECTIVE: To retrospectively evaluate the craniofacial morphology of children with a complete unilateral cleft lip and palate treated with a 1-stage simultaneous cleft repair performed in the first year of life. METHODS: Cephalograms and extraoral profile photographs of 61 consecutively treated patients (42 boys, 19 girls) who had been operated on at 9.2 (SD, 2.0) months by a single experienced surgeon were analyzed at 11.4 (SD, 1.5) years. The noncleft control group comprised 81 children (43 boys and 38 girls) of the same ethnicity at the age of 10.4 (SD, 0.5) years. RESULTS: In children with cleft, the maxilla and mandible were retrusive; the palatal and mandibular planes were more open, and sagittal maxillomandibular relationship was less favorable in comparison to noncleft control subjects. Soft tissues in patients with cleft reflected retrusive morphology of hard tissues--subnasal and supramental regions were less convex, profile was flatter, and nasolabial angle was more acute relative to those of the control subjects. CONCLUSIONS: Craniofacial morphology after 1-stage repair was deviated in comparison with noncleft control subjects. However, the degree of deviation was comparable with that found after treatment with alternative surgical protocols.

Optimal sites for orthodontic mini-implant placement assessed by cone beam computed tomography

OBJECTIVES: To determine (1) the optimal sites for mini-implant placement in the maxilla and the mandible based on dimensional mapping of the interradicular spaces and cortical bone thickness and (2) The effect of age and sex on the studied anatomic measurements. MATERIAL AND METHODS: The cone beam computed tomography images of 100 patients (46 males, 54 females) divided into two age groups (13-18 years), and (19-27 years) were used. The following interradicular measurements were performed: (1) Buccolingual bone thickness; (2) Mesiodistal spaces both buccally and palatally/lingually; and (3) Buccal and palatal/lingual cortical thicknesses. RESULTS: In the maxilla, the highest buccolingual thickness existed between first and second molars; the highest mesiodistal buccal/palatal distances were between the second premolar and the first molar. The highest buccal cortical thickness was between the first and second premolars. The highest palatal cortical thickness was between central and lateral incisors. In the mandible, the highest buccolingual and buccal cortical thicknesses were between the first and second molars. The highest mesiodistal buccal distance was between the second premolar and the first molar. The highest mesiodistal lingual distance was between the first and second premolars. The highest lingual cortical thickness was between the canine and the first premolar. The males and the older age group had significantly higher buccolingual, buccal, and palatal cortical thicknesses at specific sites and levels in the maxilla and the mandible. CONCLUSIONS: A clinical guideline for optimal sites for mini-implant placement is suggested. Sex and age affected the anatomic measurements in certain areas in the maxilla and the mandible.

Dental arch relationship in children with complete unilateral cleft lip and palate following one-stage and three-stage surgical protocols

The objective of this study is to compare dental arch relationship following one-stage and three-stage surgical protocols of unilateral cleft lip and palate. Dental casts of 61 children (mean age, 11.2 years; SD, 1.7), consecutively treated in one center with one-stage closure of the complete cleft at 9.2 months (SD, 2.0), were compared with a sample of 97 patients (mean age, 8.7 years; SD, 0.9), consecutively treated with a three-stage protocol including delayed hard palate closure in another center. The dental casts were assigned random numbers to blind their origin. Four raters graded dental arch relationship and palatal morphology using the EUROCRAN index. The strength of agreement of rating was assessed with kappa statistics. Independent t tests were run to compare the EUROCRAN scores between one-stage and three-stage samples, and Fisher's exact tests were performed to evaluate differences of distribution of the EUROCRAN grades. The intra- and inter-rater agreement was moderate to very good. Dental arch relationship in the one-stage sample was less favorable than in three-stage group (mean scores, 2.58 and 1.97 for one-stage and three-stage samples, respectively; p?Palatal morphology in the one-stage sample was more favorable than in the three-stage group (mean scores, 1.79 and 1.96 for one-stage and three-stage samples, respectively; p?=?0.047). The dental arch relationship following one-stage repair was less favorable than the outcome of three-stage repair. The palatal morphology following one-stage repair, however, was more favorable than the outcome of three-stage repair.

[Only a denture sore? Causes of a possible denture sore from a maxillary complete denture]

This case presentation documents the treatment sequence of a 74 years old patient who complained about a sore spot of the palatal mucosa underneath the complete denture. The intraoral examination revealed a dark spot, redness and swelling of the mucosa around this spot and halitosis. The mucosa exhibited a perforation of 3 x 10 mm in diameter. A radiographic 3-D picture showed an impacted canine tooth, which was partly covered by the palatal bone. Firstly the denture base was relieved and the swelling gradually disappeared. Then a biopsy was taken for histological analysis to exclude any malignant process. In local anesthesia the tooth was extracted, which exhibited a deep carious lesion of the entire crown. After surgery a visible collapse of the jaw crest was observed. During a period of two months the denture was relined with a soft material to improve its fit and to enhance the healing process. With a final rebasement, the existing denture could be adapted again and the patient continued to wear it.

Clinical and antibacterial effect of an anti-inflammatory toothpaste formulation with Scutellaria baicalensis extract on experimental gingivitis

It was the aim of the study to evaluate the clinical and antibacterial effect of a dentifrice containing an anti-inflammatory plant extract (SB) versus a placebo (PLA) using an experimental gingivitis model. Forty subjects (20 per group) discontinued all oral hygiene measures for four teeth for a period of 21 days using a shield (to generate a possible gingivitis) while they could brush the other teeth normally. After brushing, the shield was removed and teeth were treated with the randomly assigned toothpaste slurry for 1 min. Löe and Silness gingival index (GI), Silness and Löe plaque index (PI), and biofilm vitality (VF%) were assessed at days 0, 14, and 21, respectively. Subjects of the PLA group developed a GI of 0.82?±?0.342 (day 14) and 1.585?±?0.218 (day 21), while the data of the SB group were significantly reduced (0.355?±?0.243 and 0.934?±?0.342, p?

Dental Arch Relationships following Palatoplasty for Cleft Lip and Palate Repair

Palatal scarring is assumed to be a primary cause of facial growth derangement in cleft lip and palate. Evidence supporting this hypothesis is confounded by the clinical involvement of various surgeons, and therefore definitive conclusions are not possible. In this study, we investigated the dental arch relationship in two groups, Exposed (47 children; 11.2 yrs) and Unexposed (61 children; 11.2 yrs), with a unilateral cleft lip and palate operated on by the same surgeon. The technique of hard palate repair differed between the two groups. In the Exposed group, palatal bone of the non-cleft side only was left denuded, inducing scar formation. In the Unexposed group, a vomerplasty with tight closure of the soft tissues was applied. Three raters graded the dental arch relationship and palatal morphology using the EUROCRAN Index. The dental arch relationship in the Exposed group was less favorable than in the Unexposed group (p = 0.009). Palatal morphology in both groups was comparable (p = 0.323). This study demonstrates that reduction of denuded bony areas on the palate after palatal repair with a vomer flap had a favorable effect on the dental arch relationship. For palatal morphology, no effect of the type of palatal repair was found.

In situ and in vitro comparison of laser fluorescence with visual inspection in detecting occlusal caries lesions

The aim of this study was to compare the in situ and in vitro performances of a laser fluorescence (LF) device (DIAGNOdent 2095) with visual inspection for the detection of occlusal caries in permanent teeth. Sixty-four sites were selected, and visual inspection and LF assessments were carried out, in vitro, three times by two independent examiners, with a 1-week interval between evaluations. Afterwards, the occlusal surfaces were mounted on the palatal portion of removable acrylic orthodontic appliances and placed in six volunteers. Assessments were repeated and validated by histological analysis of the tooth sections under a stereomicroscope. For both examiners, the highest intra-examiner values were observed for the visual inspection when in vitro and in situ evaluations were compared. The inter-examiner reproducibility varied from 0.61 to 0.64, except for the in vitro assessment using LF, which presented a lower value (0.43). The methods showed high specificity at the D(1) threshold (considering enamel and dentin caries as disease). In vitro evaluations showed the highest values of sensitivity for both methods when compared to the in situ evaluations at D(1) and D(2) (considering only dentinal caries as the disease) thresholds. For both methods, the results of sensitivity (at D(1) and D(2)) and accuracy (at D(1)) showed significant differences between in vitro and in situ conditions. However, the sensitivity (at D(1) and D(2)), specificity and accuracy (both at D(1)) of the methods were not significantly different when the same condition was considered. It can be concluded that visual inspection and LF showed better performance in vitro than in situ.

Conventional and anti-erosion fluoride toothpastes: effect on enamel erosion and erosion-abrasion

New toothpastes with anti-erosion claims are marketed, but little is known about their effectiveness. This study investigates these products in comparison with various conventional NaF toothpastes and tin-containing products with respect to their erosion protection/abrasion prevention properties. In experiment 1, samples were demineralised (10 days, 6 × 2 min/day; citric acid, pH 2.4), exposed to toothpaste slurries (2 × 2 min/day) and intermittently stored in a mineral salt solution. In experiment 2, samples were additionally brushed for 15 s during the slurry immersion time. Study products were 8 conventional NaF toothpastes (1,400-1,490 ppm F), 4 formulations with anti-erosion claims (2 F toothpastes: NaF + KNO(3) and NaF + hydroxyapatite; and 2 F-free toothpastes: zinc-carbonate-hydroxyapatite, and chitosan) and 2 Sn-containing products (toothpaste: 3,436 ppm Sn, 1,450 ppm F as SnF(2)/NaF; gel: 970 ppm F, 3,030 ppm Sn as SnF(2)). A mouth rinse (500 ppm F as AmF/NaF, 800 ppm Sn as SnCl(2)) was the positive control. Tissue loss was quantified profilometrically. In experiment 1, most NaF toothpastes and 1 F-free formulation reduced tissue loss significantly (between 19 and 42%); the Sn-containing formulations were the most effective (toothpaste and gel 55 and 78% reduction, respectively). In experiment 2, only 4 NaF toothpastes revealed significant effects compared to the F-free control (reduction between 29 and 37%); the F-free special preparations and the Sn toothpaste had no significant effect. The Sn gel (reduction 75%) revealed the best result. Conventional NaF toothpastes reduced the erosive tissue loss, but had limited efficacy regarding the prevention of brushing abrasion. The special formulations were not superior, or were even less effective.