849 resultados para PVC-aren degradazioa


Relevância:

10.00% 10.00%

Publicador:

Resumo:

Os principais causadores de perdas da qualidade de figos são: colheita e embalagens inadequadas, falta de padronização do produto na classificação e péssimas condições de transporte e armazenamento. Com este trabalho objetivou-se avaliar o efeito da imersão em hipoclorito, tipo de embalagem e refrigeração na conservação pós-colheita de figos verdes, cv. Roxo de Valinhos, mediante as características físicas, físico-químicas e químicas, durante o armazenamento. Após seleção, os figos foram imersos ou não em solução de hipoclorito de sódio a 40 ppm conforme os tratamentos, secos ao ar e embalados em filme de PVC de 50 m ou sacos plásticos. Após os tratamentos, os frutos foram submetidos a armazenamento refrigerado (1ºC e 70% de UR em BOD), por um período de 35 dias, sendo avaliados a cada 7 dias. O uso da embalagem reduziu drasticamente a perda de massa dos figos. Frutos não embalados apresentaram-se mais ácidos e com menores teores de açúcares. Com o uso da embalagem, os figos podem ser comercializados até os 35 dias de armazenamento desde que armazenados a 1ºC e 70% de UR em BOD. Já os figos não embalados, estes podem ser comercializados somente até os 2 dias de armazenamento sob refrigeração.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Rhapis excelsa, originária do sul da China, é uma das palmeiras ornamentais mais cultivadas no mundo, principalmente em vaso. Objetivou-se com esta pesquisa investigar a influência da altura do vaso no desenvolvimento da espécie. Para tanto, mudas de dois anos de idade, apresentando 10 cm de altura e sistema radicular com 10 cm de comprimento, foram transplantadas para recipientes de PVC com 10 cm de diâmetro e 20, 25, 30, 35 e 40 cm de altura, que se constituíram em tratamentos. O substrato utilizado foi uma mistura de casca de pinho, vermiculita e solo argiloso (2:1:1), adubado com 45 g de Osmocote (15:10:10). Os parâmetros avaliados foram: altura da planta, diâmetro do colo, número de folhas, número de perfilhos emitidos, avaliados aos 6, 12 e 18 meses após a instalação do experimento. Aos 18 meses foram tomados também o peso da matéria seca da parte aérea e o peso da matéria seca das raízes. O delineamento experimental foi inteiramente casualizado, com cinco repetições com duas plantas. Houve diferença significativa para a variável altura de plantas, aos 6 meses, sendo que o recipiente de 40 cm de altura apresentou o pior resultado. Não houve diferença significativa entre as variáveis analisadas aos 12 meses de investigação. Já aos 18 meses, houve diferenças significativas entre os tratamentos para as variáveis altura da planta e diâmetro do colo, sendo o recipiente de 40 cm inferior aos demais em relação à altura da planta e o de 25 cm superior quanto ao diâmetro do colo. A utilização do recipiente com 25 cm de altura revelou-se interessante pela qualidade das plantas formadas e em relação a aspectos econômicos da produção.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Programas de melhoramento são atividades que se desenvolvem durante anos e, por isso, devem ser flexíveis ao ajuste às novas situações criadas por mudanças nas tendências de mercado, na situação econômica e aquelas causadas por aumento do volume e qualidade dos dados e, também, por novas técnicas propostas pela comunidade científica. O ajuste a essas últimas deve ser feito, principalmente, por meio da substituição e escolha do modelo mais adequado para a descrição do fenômeno, em um determinado cenário. Os dados de ganho de peso médio diário, de um programa de melhoramento de suínos, envolvendo as raças Duroc, Landrace e Large White, foram analisados por meio da teoria bayesiana, por meio de dois modelos candidatos. Foram simulados três níveis de informação à priori: informativa, pouco informativa e não informativa. O comportamento das curvas das distribuições à posteriori e as respectivas estimativas associadas a cada nível de informação à priori foram analisadas e comparadas. Os resultados indicam que no modelo mais simples, as amostras das três raças são suficientes para produzir estimativas que não são alteradas pela informação à priori. Com relação ao mais parametrizado, as estimativas, para a raça Duroc, são alteradas pelo conhecimento prévio e, nesse caso, deve se buscar a melhor representação possível da distribuição à priori para obtenção de estimativas que são mais adequadas, dado o estado de conhecimento atual do melhorista.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Objetivou-se avaliar o padrão de fermentação e a composição química de silagens de grãos úmidos de milho e de sorgo confeccionadas com ou sem o uso de inoculante microbiano. Avaliou-se, no experimento 1, a silagem de grãos úmidos de milho e, no experimento 2, a silagem de grãos úmidos de sorgo. O material foi ensilado em silos experimentais de PVC (50 cm de comprimento e 100 mm de diâmetro), três por tratamento (tempo de armazenagem, com ou sem inoculante) para cada grão. Amostras foram tomadas antes (0) e aos 1, 2, 3, 4, 8, 16, 32 e 64 dias após a ensilagem, totalizando 48 silos experimentais para cada grão. Os tratamentos foram arranjados em delineamento inteiramente casualizado, em esquema fatorial 2 x 9 (com e sem inoculante microbiano, nove tempos de armazenagem), com três repetições para cada grão. Não houve efeito da inoculação e do tempo pós-ensilagem sobre o teor de MS dos grãos úmidos de milho e de sorgo, com médias de 64,13 e 64,03% e de 67,66 e 67,48% para silagens controle e inoculadas, respectivamente. Não houve efeito da inoculação sobre o pH dos grãos úmidos de milho e de sorgo aos 64 dias após ensilagem, com médias de 3,97 e 3,92 e de 3,94 e 3,95 unidades para silagens controle e inoculadas, respectivamente. O inoculante microbiano não promoveu alterações na composição química nem redução de perdas da MS nas silagens de grãos úmidos de milho e de sorgo. Nas condições estudadas, não é necessária inoculação para melhoria nos padrões fermentativos de silagens de grãos úmidos de milho e de sorgo.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The thermal behavior and non-isothermal kinetics of thermal decomposition of three different kinds of composting of the USR like: stack with drilled PVC tubes (ST), revolved stack (SR) and stack with material of structure (SM), from the usine of composing of Araraquara city, São Paulo state, Brazil, within a period of 132 days of composting were studied.Results from TG, DTG and DSC curves obtained on inert atmosphere indicated that the cellulosic fraction present, despite the slow degradation during the composting process, is thermally less stable than other substances originated from that process. Due to that behavior, the cellulosic fraction decomposition could be kinetically evaluated through non-isothermal methods of analysis.The values obtained were: average activation energy, E-a=248, 257 and 259 kJ mol(-1) and pre-exponential factor, logA=21.4, 22.5, 22.7 min(-1), to the ST, SR and SM, respectively.From E-a and logA values and DSC curves, Malek procedure could be applied, suggesting that the SB (Sestak-Berggren) kinetic model is the appropriated one to the first thermal decomposition step.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The effect of deacetylated xanthan gum, additives (sucrose, soybean oil, sodium phosphate and propylene glycol) and pH modifications on mechanical properties, hydrophilicity and water activity of cassava starch-xanthan gum films has been studied. Sucrose addition resulted in the highest effect observed on cassava starch films elongation at break. The deacetylated xanthan gum had higher effect on elongation at break when comparing to the acetylated gum, although both gums presented an inferior effect in relation to the obtained with sucrose. However, when comparing to the control and PVC films, lower tensile strength resistance values were observed when adding sucrose. Increased water activity was observed for films added with sucrose, thus, increasing the material biodegradation. Sucrose and deacetylated xanthan gum addition resulted in a slight hydrophilicity increase. (C) 2004 Elsevier Ltd. All rights reserved.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

HDPE and PVC geomembranes are sensitive to changes in their properties when in contact with high temperatures. The effects of hot temperature on polymeric geomembranes are assessed by the ASTM D794 and ASTM D5721.This paper brings an analysis of degradation of the Poly Vinyl Chloride (PVC) and High Density Poly Ethylene (HDPE) geomembranes when exposed to conventional and air oven after specific periods.. Mechanical and physical properties were evaluated. OIT tests were also performanced to evaluate the level of oxidation degradation occurred on the HDPE geomembranes. Geomembranes of two thicknesses were tested: 1.0, 2.0 nun (PVC) and 0.8, 2.5 mm, (HDPE). The results obtained show, for example, that after the last period of exposure, the PVC geomembranes (1.0, 2.0 mm) were more rigid and stiffer than fresh samples. The HDPE geomembranes, on the other hand, when exposed to heat presented increases in deformation. OIT tests showed efficient to detect some level of degradation on the HDPE geomembranes.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Aiming at evaluating the use of those byproducts on ruminant feeding an experiment has been carried out in the Forage Research department (www.npf.ufc.br), in order to evaluate the effects of addition of increasing levels of mango processing byproducts (MB) in Elephant grass silages. Twenty experimental silos made of PVC pipe (100 x 340 mm), in a completely randomized design with 5 levels of addition (0; 5; 10; 15; and 20%) of MB and 4 replications. Upon 32 days of ensilage, samples were collected for determination of levels of dry Matter (DM), crude protein (CP), ethereal extract (EE), neutral detergent fiber (NDF), acid detergent fiber (ADF), hemicelluloses (HC), ammonia nitrogen (N-NH3), and pH values. Data were evaluated by analyses of variance and regression analyses using the F test at the 5% level. The levels of DM and CP increased of 0.50 and 0.03 percentage units, respectively, for every 1% of MB added. The levels of NDF and ADF decreased of 0.51 and 0.24 percentage units, respectively, for every 1% of MB added. The levels of N-NH3 decreased from 4 to 23 percentage units while pH values remained constant (p>0.05), with average values of 3.29. Addition of 20% of MB improved silages chemical composition by promoting an increase in the levels of MS and reduction in the levels of fiber.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Soil columns were produced by filling PVC tubes with a Dark Red Latosol (Acrortox, 22% of clay). A compacted layer was established at the depth of 15 cm in the columns. In the compacted layer, soil was packed to 1.13, 1.32, 1.48, and 1.82 Mg kg(-1), resulting in cone resistances of 0.18, 0.43, 1.20, and 2.50 MPa. Cotton was cropped for 30 days. Lime was applied to raise base saturation to 40, 52, and 67%. The highest base saturation caused a decrease in phosphorus (P) and zinc (Zn) concentrations in the plants. A decrease in root dry matter, length and surface area was also observed. This could be a consequence of lime induced Zn deficiency. Root growth was decreased in the compacted layer, and complete inhibition was noticed at 2.50 MPa. Once the roots got through the compacted layer, there was a growth recovery in the bottom layer of the pots. The increase in base saturation up 52% was effective in preventing a decrease in cotton root length at soil resistances to 1.20 MPa. Where the roots were shorter, there was an increase in nutrient uptake per unit of root surface area, which kept the plants well nourished, except for P.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Soil compaction has a negative effect and Ca was shown to enhance root growth. The effects of soil subsurface compaction and liming on root growth and nutrient uptake by soybean were studied at the Department of Agriculture and Plant Breeding, São Paulo State University, Brazil. A Dark Red Latosol, sandy loam (Haplortox) was limed to raise base saturations to 40.1, 52.4 and 66.7%. The experimental pots were made of PVC tubes with 100 mm of diameter. Three rings with 150, 35 and 150 mm long were fixed one on the top of the other. In the central ring of 35 mm, the soil was compacted to bulk densities of 1.06, 1.25, 1.43 and 1.71 g.cm(-3). There was no effect of base saturation on soybean root and shoot growth and nutrition. Subsurface compaction led to an increase in root growth in the superficial layer of the pots with a correspondent quadratic decrease in the compacted layer. There was no effect of subsoil compaction on total root length and surface, soybean growth and nutrition. Soybean root growth was decreased by 10% and 50% when the soil penetrometer resistances were 0.52 MPa (bulk density of 1.45 g.cm(-1)) and 1.45 MPa (bulk density of 1.69 g.cm(-3)), respectively. In spite of the poor root growth in the compacted layer, once it nas overcome the root system showed an almost complete recovery.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The milk is an important food because it contents Conjugated Linoleic Acids (CIA). These fatty acids are synthesized in mammary gland under action of the enzyme Stearoyl CoA-Desaturase (SCD) and have showed some positive effects in human disease prevention and treatments. A variation of CLA in milk fat exists and can be partially explained by the different levels of expression of SCD. The aim was to study part of the encoding regions of SCD's gene using PCR-RFLP (Polymerase Chain Reaction-Restriction Fragment Length Polymorphism). Genomic DNA was extracted from lactating Murrah females. After this, PCR reactions were made by using primers Z (sic) (sic) D1 that encloses exon I, II and intron I. The fragments amplified are composed by 938 pb. Then, RFLP techniques were applied in the fragments using the restriction enzymes Pst I and Sma I. The enzyme Pst I has generated fragments of 788pb and 150bp and the Sma I has generated fragments of 693pb and 245pb. All the animals showed the same migration standard for both enzymes, characterizing a genetic monomorphism for this region of SCD gene. The analysis determined that there aren't genetic differences between these animals in the studied regions by using Pst I and Sma I enzymes.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The present work had evaluated the efficiency of the pasteurization and the use of preservatives in mangos pulps (Mangifera indica L.) refrigerated. Before carrying out the treatments, the fruits had been cleaned in solution of sodium hypochlorite (NaOCl) at 100 mg. L(-1), for 10 minutes. After the processing, it was carried out through the adjustment of pH of pulps for 3.0 and the adjustment of the water activity (W(a)) at 0.95. The used variable had been the branching (hot water at 95 +/- 5 degrees C, for 0 and I minute), the addition of sodium benzoate in the concentrations of 0; 200 and 500 mL.L(-1) and, sulfite dioxide (SO(2)) in 0, 100 and 200 mL.L(-1). Then the pulps had been packed in low density polyethylene (LDPE) bags of 0,060 mm (0.10 x 0.12 m - without free space and content of 500g of pulp) and, conditioned in at 20 +/- 1 degrees C e 80 +/- 3% of R.H, for 28 days. At the end of the experiment, the treatments not submitted to the branching had shown the biggest ascorbic acid levels. However, in these same treatments had been noticed intense microbiological activity and raised levels of pH. There aren't significant differences between the tested treatments in the titratable acidity (TA) and soluble solids (SS) analyses. Due to the absence of black spot in the pulps used during all the experimental period, it couldn't be detected the differences between the application of the SO(2) and the use of the branching. The lower index of microbiological contamination and the preference of the judges in the sensorial panel had been attributed to the submitted treatments to the branching, addition of 500mL.L(-1) of sodium benzoate and addition of 200mL.L(-1) of sulfite dioxide.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The main objective of this research was to evaluate chemical and physical changes in 'Aurora-1' peach harvested at two maturity stages, packed in different types of packaging and kept under refrigeration. Fruit were harvested at the mature green and ripe stages, packed in four different types of packaging (control, PD-900 (TM), PVC and PET) and stored at 6 degrees C. The following variables were evaluated every eight days: coloration, accumulated fresh mass loss, firmness, appearance, acidity, total soluble solids contents, soluble sugars, and percentage of pectin solubilization. We observed that the postharvest life was influenced by packaging and the mature green fruits showed lower disease occurrence. Fresh mass loss was lower in packed fruits. The peel of mature green fruits developed a characteristic ripe peach color at the end of storage, but PD-900 (TM) provided a delay in color change. Packaging also influenced the firmness, allowing for more firmness retention than for the control fruits at both harvest stages. The organic acid content decreased in the packaged fruits and increased in the control fruits. In the packaged fruit, the amount of sugar increased until the eighth day and then decreased until the end of the storage period. The 'Aurora-1' peaches did not show compromised quality by packaging use and exhibited an increase in harvest life to 24 days (compared to 16 days for the control).

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The production of minimally processed fruit has increased significantly in the last few years due to the high nutritional value, convenience and safety of minimally processed fruit. The objective of the present study was to evaluate the effects of the conservation temperature and processing conditions on the quality and shelf-life of minimally processed peaches. The processing procedure consisted of washing, sanitization, peeling and stone removal. To remove the stone, the fruit was cut longitudinally, and three types of products were obtained, including halves, quarters and one-eighth segments. The fruit pieces were immersed in 2% ascorbic acid for 3 min and were packed in rigid polystyrene trays (Meiwa (c) M-54) coated with 14 mu m PVC film (Omnifilm (TM)) (about 200 g per pack). The pieces were stored at 65% RH at 3, 6 or 9 degrees C for 12 days, and were evaluated every four days. The appearance, fresh mass loss, color, O-2 and CO2 concentration, acidity, total soluble solids, total and soluble pectin content and ascorbic acid concentration were measured. Minimally processed peaches stored at 3 degrees C maintained higher quality due to control of ripening and senescence Moreover, an interaction effect between one-eighth segments and a temperature of 3 degrees C was observed, and fruit with a superior appearance and higher soluble solids content was obtained.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The aim of this work was to observe the interaction between soil moisture and irrigation time intervals on the germination of sugarcane cv. RB785148 sets in semi-controlled conditions. One-bud sets of the variety RB785148 were germinated in ceramic pots filled with soil under a transparent PVC cover using soil humidity levels of 22, 25 and 30%, that were restored at intervals of 7, 14 and 21 days. The experiment was carried out at three different periods of the year: May-June/94; Oct.-Nov./94; and Mar.-Apr./95. The results indicate that the germination decreased mainly in function of the decrease in soil humidity, whereas irrigation interval have no statistical effect on germination. An interaction between humidity level and irrigation interval was observed. A variation of the timecourse of the germination could be observed when the results of the experiments installed at different dates were compared.