Novo Software para análise do epitélio nasal humano

A discinesia ciliar primária (DCP) resulta de disfunção ciliar no ser humano, estando associada a um conjunto de sintomas muito diversificados. É uma doença respiratória rara caracterizada por infecções respiratórias, situs inversus, infertilidade e hidrocefalia. Em Portugal não existe nenhum centro de diagnóstico da doença. Mas a inten-ção de criar um surgiu, seguindo o método de centros de diagnóstico para DCP utilizado noutros países. Este diagnóstico consiste em recolher amostras dos cílios do nariz, através do método de escovagem nasal e obter a gravação do batimento das células ciliadas por uma câmara de alta velocidade acoplada a um microscópio com objectivas de alta resolução. É possível estudar a DCP através da análise do comportamento físico dos cílios, e, para uma melhor abordagem, foi desenvolvido um programa executável, em C#, para análise destas amostras. Este, após a escolha de uma zona de interesse da sequência de imagens pelo utilizador (ROI), detecta as frequências do bati-mento ciliar, indicando uma lista com as percentagens das frequências obtidas e cria um mapa de frequências do ROI. A ferramenta permite ainda calcular o comprimento do cílio e realizar um estudo do movimento do mesmo, algo que ainda não foi abordado por outros programas. O código desenvolvido permitirá, assim, obter um diagnóstico de DCP em Por-tugal, rápido e nalguns casos com um melhor desempenho do que a inspecção visual seguida noutros centros de diagnóstico.

Plataforma online de partilha e comparação de software para análise de imagens da retina

Nesta Tese foi desenvolvida uma plataforma online multiutilizador, que tem como objetivo principal comparar algoritmos de análise de imagens para de-terminar o seu grau de eficácia. Um exemplo de aplicação é a comparação de algoritmos de análise de imagens da retina para deteção de drusas. A compa-ração é feita considerando um dos algoritmos como referência padrão e sobre o este são avaliados os restantes. O funcionamento da plataforma é semelhante à de um fórum, onde é possível a um utilizador criar tópicos publicando imagens e seu descritivo. Após a cria-ção do tópico qualquer utilizador pode visualizar o mesmo, dando a hipótese de comentar ou de acrescentar imagens processadas com os seus próprios al-goritmos de análise. Com o aumento de imagens processadas, obtém-se uma base de dados de algoritmos de análise de imagens sobre a qual é possível avaliar o seu grau de eficácia. A plataforma pretende também criar comunidades onde os utilizadores pos-sam interagir uns com os outros comentando sobre os tópicos, contribuindo assim para o melhoramento dos algoritmos. Deste modo, além de uma base de dados que qualquer utilizador pode usar, obtém-se uma fonte de informação disponibilizada por outros profissionais da área.

Efficiency optimization of the transportation supply chain activity: the maritime option for Volkswagen Autoeuropa

Field Lab of Entrepreneurial Innovative Ventures

O uso do software de edição áudio Audacity 2.0.5: aprendizagens decorrentes da sua utilização

Contém CD com áudio como anexo

Cost-to-serve customers’ optimization: Macro project Unilever – Jerónimo Martins

The objective of this work project is to analyse and discuss the importance of the “Cost to Serve” as a differentiation key factor, by accessing cost to serve customers of a Portuguese subsidiary of a multinational company, which is operating in the sector of fast moving consumer goods (FMCG) – Unilever – Jerónimo Martins (UJM). I will also suggest and quantify key proposals to decrease costs and increase customers’ value. Hence, the scope of this work project is focused on logistics and distribution processes of the company supply chain.

Spatial distribution of trachoma cases in the City of Bauru, State of São Paulo, Brazil, detected in 2006: defining key areas for improvement of health resources

IntroductionThe objective of this study was to analyze the spatial behavior of the occurrence of trachoma cases detected in the City of Bauru, State of São Paulo, Brazil, in 2006 in order to use the information collected to set priority areas for optimization of health resources.Methodsthe trachoma cases identified in 2006 were georeferenced. The data evaluated were: schools where the trachoma cases studied, data from the 2000 Census, census tract, type of housing, water supply conditions, distribution of income and levels of education of household heads. In the Google Earth® software and TerraView® were made descriptive spatial analysis and estimates of the Kernel. Each area was studied by interpolation of the density surfaces exposing events to facilitate to recognize the clusters.ResultsOf the 66 cases detected, only one (1.5%) was not a resident of the city's outskirts. A positive association was detected of trachoma cases and the percentage of heads of household with income below three minimum wages and schooling under eight years of education.ConclusionsThe recognition of the spatial distribution of trachoma cases coincided with the areas of greatest social inequality in Bauru City. The micro-areas identified are those that should be prioritized in the rationalization of health resources. There is the possibility of using the trachoma cases detected as an indicator of performance of micro priority health programs.

Optimization of export support systems: How to promote exports from Portugal to Germany in the area of information technology and electronics

This work project focuses on developing new approaches which enhance Portuguese exports towards a defined German industry sector within the information technology and electronics fields. Firstly and foremost, information was collected and a set of expert and top managers’ interviews were performed in order to acknowledge the demand of the German market while identifying compatible Portuguese supply capabilities. Among the main findings, Industry 4.0 presents itself as a valuable opportunity in the German market for Portuguese medium sized companies in the embedded systems area of expertise for machinery and equipment companies. In order to achieve the purpose of the work project, an embedded systems platform targeting machinery and equipment companies was suggested as well as it was developed several recommendations on how to implement it. An alternative approach for this platform was also considered within the German market namely the eHealth sector having the purpose of enhancing the current healthcare service provision.

Optimization of export support systems

The present paper is a personal reflection on a work project carried out to promote exports from Portugal to Germany in the IT area, under consideration of the deliverables required by the clients CCILA and Anetie. The project outcome approaches the fact that the majority of the Portuguese market players has disadvantages in size and does rarely coordinate activities among each other, which hinders them to export successfully on a broad scale. To bring together Portuguese delivery potential and German market demand, expert interviews were conducted. Based on the findings, a concept was developed to overcome the domestic collaboration issues in order to strengthen the national exports in the identified sector - embedded systems implementation services for machinery and equipment companies.

Shrinking shrinkage:How and why is fruit shrinkage being caused in Sonaemc's convenience stores? Finding opportunities of improvement envisioning its optimization

This work project regards a challenge presented by a Portuguese organization on the retail sector, SONAEMC, which is a case study of how and why fruit shrinkage occurs in the fruit supply chain within their convenience stores. A qualitative research methodology enabled to infer in which stages throughout the chain shrinkage’s causes occur and, to conclude that internal rules for procedures and processes are not always followed and whose compliance would be enough to reduce fruit shrinkage. The key conclusion is that if fruit stock loss is reduced by as much as 15% the category’s profitability could increase about 8%.

Performance of the Vitek 2 system software version 5.03 in the bacterial identification and antimicrobial susceptibility test: evaluation study of clinical and reference strains of Gram-positive cocci

Introduction. The genera Enterococcus, Staphylococcus and Streptococcus are recognized as important Gram-positive human pathogens. The aim of this study was to evaluate the performance of Vitek 2 in identifying Gram-positive cocci and their antimicrobial susceptibilities. Methods. One hundred four isolates were analyzed to determine the accuracy of the automated system for identifying the bacteria and their susceptibility to oxacillin and vancomycin. Results. The system correctly identified 77.9% and 97.1% of the isolates at the species and genus levels, respectively. Additionally, 81.8% of the Vitek 2 results agreed with the known antimicrobial susceptibility profiles. Conclusion. Vitek 2 correctly identified the commonly isolated strains; however, the limitations of the method may lead to ambiguous findings.

Technical optimization of the synthesis of flavours

The goal of this thesis is the investigation and optimization of the synthesis of potential fragrances. This work is projected as collaboration between the University of Applied Sciences in Merseburg and the company Miltitz Aromatics GmbH in Bitterfeld‐Wolfen (Germany). Flavoured compounds can be synthesized in different ways and by various methods. In this work, methods like the phase transfer catalysis and the Cope‐rearrangement were investigated and applied, for getting a high yield and quantity of the desired substances and without any by‐products or side reactions. This involved the study of syntheses with different process parameters such as temperature, solvent, pressure and reaction time. The main focus was on Cope‐rearrangement, which is a common method in the synthesis of new potential fragrance compounds. The substances synthesized in this work have a hepta‐1,5‐diene‐structure and that is why they can easily undergo this [3,3]‐sigma tropic rearrangement. The lead compound of all research was 2,5‐dimethyl‐2‐vinyl‐4‐hexenenitrile (Neronil). Neronil is synthesized by an alkylation of 2‐methyl‐3‐butenenitrile with prenylchloride under basic conditions in a phase‐transfer system. In this work the yield of isolated Neronil is improved from about 35% to 46% by according to the execution conditions of the reaction. Additionally the amount of side product was decreased. This synthesized hexenenitrile involved not only the aforementioned 1,5‐diene‐structure, but also a cyano group, that makes this structure a suitable base for the synthesis of new potential fragrance compounds. It was observed that Neronil can be transferred into 2,5‐dimethyl‐2‐vinyl‐4‐hexenoic acid by a hydrolysis under basic conditions. After five hours the acid can be obtained with a yield of 96%. The following esterification is realized with isobutanol to produce 2,5‐dimethyl‐2‐vinyl‐4‐hexenoic acid isobutyl ester with quantitative conversion. It was observed that the Neronil and the corresponding ester can be converted into the corresponding Cope‐product, with a conversion of 30 % and 80%. Implementing the Cope‐rearrangement, the acid was heated and an unexpected decarboxylated product is formed. To achieve the best verification of reaction development and structure, scrupulous analyses were done using GC‐MS, 1H‐NMR and 13C‐ NMR.

EFFECT – Efficient finite element code

The theme of this dissertation is the finite element method applied to mechanical structures. A new finite element program is developed that, besides executing different types of structural analysis, also allows the calculation of the derivatives of structural performances using the continuum method of design sensitivities analysis, with the purpose of allowing, in combination with the mathematical programming algorithms found in the commercial software MATLAB, to solve structural optimization problems. The program is called EFFECT – Efficient Finite Element Code. The object-oriented programming paradigm and specifically the C ++ programming language are used for program development. The main objective of this dissertation is to design EFFECT so that it can constitute, in this stage of development, the foundation for a program with analysis capacities similar to other open source finite element programs. In this first stage, 6 elements are implemented for linear analysis: 2-dimensional truss (Truss2D), 3-dimensional truss (Truss3D), 2-dimensional beam (Beam2D), 3-dimensional beam (Beam3D), triangular shell element (Shell3Node) and quadrilateral shell element (Shell4Node). The shell elements combine two distinct elements, one for simulating the membrane behavior and the other to simulate the plate bending behavior. The non-linear analysis capability is also developed, combining the corotational formulation with the Newton-Raphson iterative method, but at this stage is only avaiable to solve problems modeled with Beam2D elements subject to large displacements and rotations, called nonlinear geometric problems. The design sensitivity analysis capability is implemented in two elements, Truss2D and Beam2D, where are included the procedures and the analytic expressions for calculating derivatives of displacements, stress and volume performances with respect to 5 different design variables types. Finally, a set of test examples were created to validate the accuracy and consistency of the result obtained from EFFECT, by comparing them with results published in the literature or obtained with the ANSYS commercial finite element code.