Development of new methodologies in sample treatment for proteomics workflow based on enzymatic probe sonication technology and mass spectrometry

Thesis submitted to the Universidade Nova de Lisboa, Faculdade de Ciências e Tecnologia, for the degree of Doctor of Philosophy in Biochemistry

Sulfadiazine-selective determination in aquaculture environment: Selective potentiometric transduction by neutral or charged ionophores

Solid-contact sensors for the selective screening of sulfadiazine (SDZ) in aquaculture waters are reported. Sensor surfaces were made from PVC membranes doped with tetraphenylporphyrin-manganese(III) chloride, α-cyclodextrin, β-cyclodextrin, or γ-cyclodextrin ionophores that were dispersed in plasticizer. Some membranes also presented a positive or a negatively charged additive. Phorphyrin-based sensors relied on a charged carrier mechanism. They exhibited a near-Nernstian response with slopes of 52 mV decade−1 and detection limits of 3.91 × 10−5 mol L−1. The addition of cationic lipophilic compounds to the membrane originated Nernstian behaviours, with slopes ranging 59.7–62.0 mV decade−1 and wider linear ranges. Cyclodextrin-based sensors acted as neutral carriers. In general, sensors with positively charged additives showed an improved potentiometric performance when compared to those without additive. Some SDZ selective membranes displayed higher slopes and extended linear concentration ranges with an increasing amount of additive (always <100% ionophore). The sensors were independent from the pH of test solutions within 2–7. The sensors displayed fast response, always <15 s. In general, a good discriminating ability was found in real sample environment. The sensors were successfully applied to the fast screening of SDZ in real waters samples from aquaculture fish farms. The method offered the advantages of simplicity, accuracy, and automation feasibility. The sensing membrane may contribute to the development of small devices allowing in locus measurements of sulfadiazine or parent-drugs.

O desenvolvimento da competência intercultural através do Task-Based learning na aula de língua estrangeira

Relatório de Estágio apresentado para cumprimento dos requisitos necessários à obtenção do grau de Mestre em Ensino de Inglês e de Língua Estrangeira (Francês) no 3.º Ciclo do Ensino Básico e no Ensino Secundário

A multi-objective model for scheduling of short-term incentive-based demand response programs offered by electricity retailers

In this paper, we formulate the electricity retailers’ short-term decision-making problem in a liberalized retail market as a multi-objective optimization model. Retailers with light physical assets, such as generation and storage units in the distribution network, are considered. Following advances in smart grid technologies, electricity retailers are becoming able to employ incentive-based demand response (DR) programs in addition to their physical assets to effectively manage the risks of market price and load variations. In this model, the DR scheduling is performed simultaneously with the dispatch of generation and storage units. The ultimate goal is to find the optimal values of the hourly financial incentives offered to the end-users. The proposed model considers the capacity obligations imposed on retailers by the grid operator. The profit seeking retailer also has the objective to minimize the peak demand to avoid the high capacity charges in form of grid tariffs or penalties. The non-dominated sorting genetic algorithm II (NSGA-II) is used to solve the multi-objective problem. It is a fast and elitist multi-objective evolutionary algorithm. A case study is solved to illustrate the efficient performance of the proposed methodology. Simulation results show the effectiveness of the model for designing the incentive-based DR programs and indicate the efficiency of NSGA-II in solving the retailers’ multi-objective problem.

Cohesive law estimation of adhesive joints in mode II condition

The adhesive bonding technique enables both weight and complexity reduction in structures that require some joining technique to be used on account of fabrication/component shape issues. Because of this, adhesive bonding is also one of the main repair methods for metal and composite structures by the strap and scarf configurations. The availability of strength prediction techniques for adhesive joints is essential for their generalized application and it can rely on different approaches, such as mechanics of materials, conventional fracture mechanics or damage mechanics. These two last techniques depend on the measurement of the fracture toughness (GC) of materials. Within the framework of damage mechanics, a valid option is the use of Cohesive Zone Modelling (CZM) coupled with Finite Element (FE) analyses. In this work, CZM laws for adhesive joints considering three adhesives with varying ductility were estimated. The End-Notched Flexure (ENF) test geometry was selected based on overall test simplicity and results accuracy. The adhesives Araldite® AV138, Araldite® 2015 and Sikaforce® 7752 were studied between high-strength aluminium adherends. Estimation of the CZM laws was carried out by an inverse methodology based on a curve fitting procedure, which enabled a precise estimation of the adhesive joints’ behaviour. The work allowed to conclude that a unique set of shear fracture toughness (GIIC) and shear cohesive strength (ts0) exists for each specimen that accurately reproduces the adhesive layer’ behaviour. With this information, the accurate strength prediction of adhesive joints in shear is made possible by CZM.

Use of a fluorescence-based approach to assess short-term responses of the alga Pseudokirchneriella subcapitata to metal stress

This work explores the use of fluorescent probes to evaluate the responses of the green alga Pseudokirchneriella subcapitata to the action of three nominal concentrations of Cd(II), Cr(VI), Cu(II) and Zn(II) for a short time (6 h). The toxic effect of the metals on algal cells was monitored using the fluorochromes SYTOX Green (SG, membrane integrity), fluorescein diacetate (FDA, esterase activity) and rhodamine 123 (Rh123, mitochondrial membrane potential). The impact of metals on chlorophyll a (Chl a) autofluorescence was also evaluated. Esterase activity was the most sensitive parameter. At the concentrations studied, all metals induced the loss of esterase activity. SG could be used to effectively detect the loss of membrane integrity in algal cells exposed to 0.32 or 1.3 μmol L−1 Cu(II). Rh123 revealed a decrease in the mitochondrial membrane potential of algal cells exposed to 0.32 and 1.3 μmol L−1 Cu(II), indicating that mitochondrial activity was compromised. Chl a autofluorescence was also affected by the presence of Cr(VI) and Cu(II), suggesting perturbation of photosynthesis. In conclusion, the fluorescence-based approach was useful for detecting the disturbance of specific cellular characteristics. Fluorescent probes are a useful diagnostic tool for the assessment of the impact of toxicants on specific targets of P. subcapitata algal cells.

An NMR structural study of nickel-substituted rubredoxin

J Biol Inorg Chem (2010) 15:409–420 DOI 10.1007/s00775-009-0613-6

PERFORMANCE OF CONVENTIONAL PCRs BASED ON PRIMERS DIRECTED TO NUCLEAR AND MITOCHONDRIAL GENES FOR THE DETECTION AND IDENTIFICATION OF Leishmania spp.

In visceral leishmaniasis, the detection of the agent is of paramount importance to identify reservoirs of infection. Here, we evaluated the diagnostic attributes of PCRs based on primers directed to cytochrome-B (cytB), cytochrome-oxidase-subunit II (coxII), cytochrome-C (cytC), and the minicircle-kDNA. Although PCRs directed to cytB, coxII, cytC were able to detect different species of Leishmania, and the nucleotide sequence of their amplicons allowed the unequivocal differentiation of species, the analytical and diagnostic sensitivity of these PCRs were much lower than the analytical and diagnostic sensitivity of the kDNA-PCR. Among the 73 seropositive animals, the asymptomatic dogs had spleen and bone marrow samples collected and tested; only two animals were positive by PCRs based on cytB, coxII, and cytC, whereas 18 were positive by the kDNA-PCR. Considering the kDNA-PCR results, six dogs had positive spleen and bone marrow samples, eight dogs had positive bone marrow results but negative results in spleen samples and, in four dogs, the reverse situation occurred. We concluded that PCRs based on cytB, coxII, and cytC can be useful tools to identify Leishmania species when used in combination with automated sequencing. The discordance between the results of the kDNA-PCR in bone marrow and spleen samples may indicate that conventional PCR lacks sensitivity for the detection of infected dogs. Thus, primers based on the kDNA should be preferred for the screening of infected dogs.

Speed control of induction machine based on direct torque control method

Dissertação para obtenção do Grau de Mestre em Engenharia Electrotécnica e de Computadores

Development of oxidoreductase based electrochemical biosensors

Dissertação para obtenção do Grau de Mestre em Biotecnologia

Ionic liquids as catalysts of lignocellulosic biomass processing

The present work is devoted to study the pre-treatment of lignocellulosic biomass, especially wheat straw, by the application of the acidic ionic liquid (IL) such as 1-butyl-3-methylimidazolium hydrogen sulphate. The ability of this IL to hydrolysis and conversion of biomass was scrutinised. The pre-treatment with hydrogen sulphate-based IL allowed to obtain a liquor rich in hemicellulosic sugars, furans and organic acids, and a solid fraction mainly constituted by cellulose and lignin. Quantitative and qualitative analyses of the produced liquors were made by capillary electrophoresis and high-performance liquid chromatography. Pre-treatment conditions were set to produce xylose or furfural. Specific range of temperatures from 70 to 175 °C and residence times from 20.0 to 163.3 min were studied by fixing parameters such as biomass/IL ratio (10 % (w/w)) and water content (1.25 % (w/w)) in the pre-treatment process. Statistical modelling was applied to maximise the xylose and furfural concentrations. For the purpose of reaction condition comparison the severity factor for studied ionic liquid was proposed and applied in this work. Optimum conditions for xylose production were identified to be at 125 °C and 82.1 min, at which 16.7 % (w/w) xylose yield was attained. Furfural was preferably formed at higher pre-treatment temperatures and longer reaction time (161 °C and 104.5 min) reaching 30.7 % (w/w) maximum yield. The influence of water content on the optimum xylose formation was also studied. Pre-treatments with 5 and 10 % (w/w) water content were performed and an increase of 100 % and 140 % of xylose yield was observed, respectively, while the conversion into furfural maintained unchanged.

Development of novel ionic liquids based on biological molecules

Ionic Liquids (ILs) belong to a class of compounds with unusual properties: very low vapour pressure; high chemical and thermal stability and the ability to dissolve a wide range of substances. A new field in research is evaluating the possibility to use natural chiral biomolecules for the preparation of chiral ionic liquids (CILs). This important challenge in synthetic chemistry can open new avenues of research in order to avoid some problems related with the intrinsic biodegradability and toxicity associated to conventional ILs. The research work developed aimed for the synthesis of CILs, their characterization and possible applications, based on biological moieties used either as chiral cations or anions, depending on the synthetic manipulation of the derivatives. Overall, a total of 28 organic salts, including CILs were synthesized: 9 based on L-cysteine derivatives, 12 based on L-proline, 3 based on nucleosides and 4 based on nucleotides. All these new CILs were completely characterized and their chemical and physical properties were evaluated. Some CILs based on L-cysteine have been applied for discrimination processes, including resolution of racemates and as a chiral catalyst for asymmetric Aldol condensation. L-proline derived CILs were also studied as chiral catalysts for Michael reaction. In parallel, the interactions of macrocyclic oligosugars called cyclodextrins (CDs) with several ILs were studied. It was possible to improve the solubility of CDs in water and serum. Additionally, fatty acids and steroids showed an increase in water solubility when ILs-CDs systems were used. The development of efficient and selective ILs-CDs systems is indispensable to expand the range of their applications in host-guest interactions, drug delivery systems or catalytic reactions. Novel salts derived from nucleobases were used in order to enhance the fluorescence in aqueous solution. Additionally, preliminary studies regarding ethyl lactate as an alternative solvent for asymmetric organocatalysis were performed.

Evaluation of long term persistence of Diabetes Mellitus Type II treatment newly diagnosed patients in Lisbon and Tagus health administration region : a three year follow up study

RESUMO: Raional: A persistência à terapêutica é o tempo em qualquer antidiabético oral, desde o seu início até à descontinuação de todas as medicações ou até ao fim do período do estudo. Os objetivos deste estudo foi a análise da persistência à terapêutica no segundo e terceiro anos após início do tratamento em doentes adultos diagnosticados na região de Lisboa e Vale do Tejo e determinar o efeito de determinadas variáveis na persistência a longo prazo. Métodos: Um estudo retrospetivo não interventivo foi desenhado com base nos dados a obter do SIARS (prescrições e aquisições na farmácia) e Pordata. A persistência foi quantificada como a percentagem de doentes que continuam a adquirir pelo menos um antidiabético oral ao segundo e terceiro anos após a compra da primeira receita. A associação entre a persistência e o segundo e terceiro anos com cada uma das co-variáveis foi aferido pelo teste qui-quadrado e os odd ratios foram calculados com recurso a um modelo de regressão logística. Resultados: A persistência à terapêutica obtida foi de 80% e 62% para o segundo e terceiro anos após início da terapêutica. Odd ratios para primeiro e segundo ano: número de grupos farmacoterapêuticos diferentes (OR = 2.167, 1.807 – 2.598, p = 0.000 / OR = 1.863, 1.621 – 2.142, p = 0.000); idade (OR = 0.914, 0.772 – 1.081, p = 0.294 / OR = 0.875, 0.764 – 1.002, p = 0.054); sexo (OR = 1.163, 0.983 – 1.377, p = 0.079); número de diferentes prescritores (OR = 3.594, 3.030 – 4.262, p = 0.000 / OR = 2.167, 1.886 – 2.491, p = 0.000); instituição de prescrição (OR = 0.725, 0.698 – 0.753, p = 0.000 / OR = 0.683, 0.650 – 0.717, p = 0.000); grupo farmacoterapêutico (OR = 1.056, 1.043 – 1.069, p = 0.000 / OR = 1.077, 1.060 – 1.095, p = 0.000); relação com o médico (OR = 0.834, 0.816 – 0.852, p = 0.000 / OR = 0.799, 0.777 – 0.821, p = 0.000) e custo médio mensal por grupo farmacoterapêutico (OR = 0.954, 0.942 – 0.968, p = 0.000 / OR = 0.930, 0.914 – 0.947, p = 0.000). Conclusões: O valor da persistência à terapêutica no segundo ano é ligeiramente acima do que é mencionado na literatura e não existem dados para comparar os resultados do terceiro ano. Relativamente ao efeito das co-variáveis no segundo e terceiro anos após o início do tratamento, os resultados são sobreponíveis, sendo que o sexo não está associado à persistência ao terceiro ano.----------------------------------ABSTRACT: Background: Therapy persistence is the time on any antidiabetic medication, from initiation of therapy to discontinuation of all medications or the end of the study period. The aim of the study was to analyse the therapy persistence in the second and third years after treatment initiation in newly diagnosed adult patients in the Lisbon and Tagus Valley region and to determine the effect of several co-variables in the long term persistence. Methods: A retrospective non-interventional study based on SIARS data (drug prescriptions and acquisitions) and Pordata was designed. Persistence was quantified as the percentage of patients that continued to purchase at least one type of antidiabetic at year 2 and 3 after the date of first prescription acquisition. Association between persistence at second and third years with each of the other co-variables were verified by using the Chi-Square test and odds ratio were calculated using a regression logistic model. Results: Therapy persistence obtained was 80% and 62% for the second and third years after treatment initiation. Odd ratios for second and third years: number of different pharmacotherapeutic groups (OR = 2.167, 1.807 – 2.598, p = 0.000 / OR = 1.863, 1.621 – 2.142, p = 0.000); age (OR = 0.914, 0.772 – 1.081, p = 0.294 / OR = 0.875, 0.764 – 1.002, p = 0.054); gender (OR = 1.163, 0.983 – 1.377, p = 0.079); number of different prescribers (OR = 3.594, 3.030 – 4.262, p = 0.000 / OR = 2.167, 1.886 – 2.491, p = 0.000); institution of prescription (OR = 0.725, 0.698 – 0.753, p = 0.000 / OR = 0.683, 0.650 – 0.717, p = 0.000); pharmacotherapeutic group (OR = 1.056, 1.043 – 1.069, p = 0.000 / OR = 1.077, 1.060 – 1.095, p = 0.000); relationship with the physician (OR = 0.834, 0.816 – 0.852, p = 0.000 / OR = 0.799, 0.777 – 0.821, p = 0.000) and average cost per month and per pharmacotherapeutic group (OR = 0.954, 0.942 – 0.968, p = 0.000 / OR = 0.930, 0.914 – 0.947, p = 0.000). Conclusions: Second year therapy persistence value is slightly above of what is referenced in literature and no data was found to compare the third year value. Regarding the effect of the co-variables analysed at second and third years after treatment initiation, the results were overlapping with gender being not associated with persistence at the third year.

Implementation of a probabilistic based framework for safety assessment of existing timber elements

The assessment of existing timber structures is often limited to information obtained from non or semi destructive testing, as mechanical testing is in many cases not possible due to its destructive nature. Therefore, the available data provides only an indirect measurement of the reference mechanical properties of timber elements, often obtained through empirical based correlations. Moreover, the data must result from the combination of different tests, as to provide a reliable source of information for a structural analysis. Even if general guidelines are available for each typology of testing, there is still a need for a global methodology allowing to combine information from different sources and infer upon that information in a decision process. In this scope, the present work presents the implementation of a probabilistic based framework for safety assessment of existing timber elements. This methodology combines information gathered in different scales and follows a probabilistic framework allowing for the structural assessment of existing timber elements with possibility of inference and updating of its mechanical properties, through Bayesian methods. The probabilistic based framework is based in four main steps: (i) scale of information; (ii) measurement data; (iii) probability assignment; and (iv) structural analysis. In this work, the proposed methodology is implemented in a case study. Data was obtained through a multi-scale experimental campaign made to old chestnut timber beams accounting correlations of non and semi-destructive tests with mechanical properties. Finally, different inference scenarios are discussed aiming at the characterization of the safety level of the elements.

Mechanical, fatigue and wear properties of sintered Carbon Nanotube-based functionally graded materials

Tese de Doutoramento Engenharia Mecânica