Road Safety Audit Report for US 61 from the ECL of Muscatine to the WCL of, 2008

U.S. Highway 61 between Muscatine and Davenport, Iowa, is a four-lane divided section of road approximately 21 miles in length. This section was found to be among the top 5% of Iowa roadways for single-vehicle run-off-road, impaired driver, unbelted driver, and speed-related crashes for the period of 2001 through 2005. A road safety audit of this corridor was deemed appropriate by the Iowa Department of Transportation’s Office of Traffic and Safety. Staff and officials from the Iowa Department of Transportation (Iowa DOT), Iowa State Patrol, Governor’s Traffic Safety Bureau, Federal Highway Administration, Center for Transportation Research and Education, and several local law enforcement and transportation agencies met to review crash data and discuss potential safety improvements to US 61. This report outlines the findings and recommendations of the road safety audit team to address the safety concerns on this US 61 corridor and explains several selected mitigation strategies.

Road Safety Audit for the US 61/Harrison Street and West Locust Street Intersection in Davenport-Scott County, Iowa, 2008

On the October 7 and 8, 2008, a road safety audit was conducted for the intersection of US 61/Harrison Street and West Locust Street in Davenport, Iowa. US 61/Harrison Street is a one-way street and a principal arterial route through Davenport, with three southbound lanes. Locust Street is a four-lane, two-way minor arterial running across the city from west to east. The last major improvement at this intersection was implemented approximately 20 years ago. The Iowa Department of Transportation requested a safety audit of this intersection in response to a high incidence of crashes at the location over the past several years, in view of the fact that no major improvements are anticipated for this intersection in the immediate future. The road safety audit team discussed current conditions at the intersection and reviewed the last seven years of crash data. The team also made daytime and nighttime field visits to the intersection to examine field conditions and observe traffic flow and crossing guard operations with younger pedestrians. After discussing key issues, the road safety audit team drew conclusions and suggested possible enforcement, engineering, public information, and educational strategies for mitigation.

Road Safety Audit for Intersection of US 218 and County Road C-57 (West Cedar Wapsi Road) in Black Hawk County, Iowa, 2009

Beginning on June 22, 2009, a road safety audit was initiated for the intersection of US 218 and County Road C-57 in Black Hawk County, Iowa. Due to the traffic volumes and the number of conflicting traffic movements on these two roadways, this intersection has developed a crash history that concerns the Iowa Department of Transportation (Iowa DOT), Iowa State Patrol, and local agencies. This intersection is ranked seventh in Iowa for the highest number of at-grade expressway intersection crashes. Considering this, Black Hawk County and the Iowa DOT requested that a road safety audit be conducted to address the safety concerns and recommend possible mitigation strategies.

Road Safety Audit for Intersection of IA 1 and County Road R-67 in Johnson County, Iowa, 2009

On August 3, 2009, a road safety audit was initiated for the intersection of IA 1 and County Road F-67 in Johnson County, Iowa. Due to the high volume of traffic accessing the cheese producing plant (Twin County Dairy, Inc.), a grocery store east of the intersection, and a large Amish community with horse-drawn wagons and carriages frequently sharing the roads with motorized vehicles, this intersection has developed a crash history that concerns the Iowa Department of Transportation (Iowa DOT), Iowa State Patrol, and local agencies. Considering this, Johnson County and the Iowa DOT requested that a road safety audit be conducted to address the safety concerns and recommend possible mitigation strategies.

Road Safety Audit for I-380 through the Cities of Cedar Rapids and Hiawatha in Linn County, Iowa, 2009

Interstate 380 (I-380) through Cedar Rapids and Hiawatha, Iowa, is a multilane divided urban freeway that was constructed in 1976 to the Cedar River and in 1981 from that point northerly. Traffic volumes vary from 47,000 to 83,500 vehicles per day, with about 8%–15% trucks and buses. Based on concern for the high number of crash incidents, particularly serious crashes, and increased traffic volumes on this roadway, the City of Cedar Rapids and the Iowa Department of Transportation (Iowa DOT) District 6 Office requested that a road safety audit be conducted for this roadway section. Representatives from the Iowa DOT, Federal Highway Administration, Center for Transportation Research and Education, local law enforcement, local government, and area businesses met to review crash data and discuss potential safety improvements to this segment of I-380. This report outlines the findings and recommendations of the road safety audit team for addressing the safety concerns on this I-380 corridor and explains several selected mitigation strategies.

Evaluation of Iowa's Driver Improvement Program, 2009

This study examines the effectiveness of Iowa’s Driver Improvement Program (DIP), measured as the reduction in the number of driver convictions subsequent to the DIP. The analysis involved a random sample of 9,055 drivers who had been instructed to attend DIP and corresponding data on driver convictions, crashes, and driver education training history that were provided by the Iowa Motor Vehicle Division. The sample was divided into two groups based on DIP outcome: satisfactory or unsatisfactory completion. Two evaluation periods were considered: one year after the DIP date (probation period) and the period from the 13th to 18th month after the DIP date. The evaluation of Iowa’s DIP showed that there is evidence of effectiveness in terms of reducing driver convictions subsequent to attending the DIP. Among the 6,790 (75%) drivers who completed the course satisfactorily, 73% of drivers had no actions and 93% were not involved in a crash during the probation period. Statistical tests confirmed these numbers. However, the positive effect of satisfactory completion of DIP on survival time (that is, the time until the first conviction) was not statistically significant 13 months after the DIP date. Econometric model estimation results showed that, regardless of the DIP outcome, the likelihood of conviction occurrence and frequency of subsequent convictions depends on other factors, such as age, driver history, and DIP location, and interaction effects among these factors. Low-cost, early intervention measures are suggested to enhance the effectiveness of Iowa’s DIP. These measures can include advisory and warning letters (customized based on the driver’s age) sent within the first year after the DIP date and soon after the end of the probation period, as well as a closer examination of DIP instruction across the 17 community colleges that host the program. Given the large number of suspended drivers who continued to drive, consideration should also be given to measures to reduce driving while suspended offenses.

Enhancing Motorcycle Conspicuity Awareness in Iowa, 2010

Previous studies in the United States and internationally suggest that low motorcycle conspicuity, or the inability of the motorcyclist to be seen by other road users, is thought to be an important factor associated with risk of motorcycle crashes. However, there has been limited research on motorcycle conspicuity in the United States in the past two decades, while at the same time; there has been a renewed interest from states in increasing motorcycle conspicuity and motorist awareness. As such, this research revisits the motorcycle conspicuity problem by analysis of helmet-use and motorcycle crash data. First, this study reviews previous studies on motorcycle conspicuity with a focus on the effectiveness of proposed measures for enhancing motorcycle conspicuity. The major trends in motorcycle helmet use by time of day and road type for motorcyclists, as indicated from three roadside observational roadside surveys in Iowa, are also discussed. Then, using motorcycle crash data for Iowa from 2001 to 2008, this research compares single-and two-vehicle motorcycle crashes and examines the distribution of conspicuity related factors in light and dark conditions in two-vehicle crashes that could potentially relate to a collision between a motorcycle and another vehicle. The limitations of examining motorcycle conspicuity by analysis of crash data are also discussed. Finally, this report outlines recommendations based on the key findings of the study.

Commercial Vehicle Parking, 1999

The purpose of the study was to review Iowa's public policy issues related to the state provision of overnight commercial truck parking and to make recommendations regarding the same. It was decided to limit the research and data gathering to a study of national trends in public commercial truck parking at facilities along and adjacent to Iowa's interstate highways.

FY2015 Equipment and Vehicle Revolving Fund report

The Equipment and Vehicle Revolving Fund report covers all equipment and vehicle purchases through the highway materials and equipment revolving fund during FY 2015.

The Effect of the No-Passing Zone Sign on "Passing" Accidents, 1963

The No Passing Zone sign (Wl0-4) was designed in 1958 for the purpose of informing the driver contemplating a passing maneuver of hazardous sight conditions ahead. This warning sign, of pennent shape design, was placed on the left side of the road so as to be more conspicuous to the intended driver. During the two year period 1959-1960, the Wl0-4 signs were erected throughout the Iowa Primary Road System.

Estimated Traffic and Vehicle-Miles of Travel on Iowa's Proposed Interstate System 1956-1975

Data tables describing the length and vehicle-miles of travel on Iowa's 1975 proposed interstate system, broken down by interstate. No text is available.

Review of Automated Vehicle Technology: Policy and Implementation Implications; Version 1.0; RB28-015, 2016

This report provides recommendations for the state of Iowa over the next five years in regards to automated vehicle policy development. These administrative, planning, legal, and community strategy recommendations for government agencies include: • Encouraging automation by preparing government agencies, infrastructure, leveraging procurement, and advocating for safety mandates • Adjusting long range planning processes by identifying and incorporating a wide range of new automation scenarios • Beginning to analyze and, as necessary, clarify existing law as it apples to automated driving • Auditing existing law • Enforcing existing laws • Ensuring vehicle owners and operators bear the true cost of driving • Embracing flexibility by giving agencies the statutory authority to achieve regulatory goals through different means, allowing them to make small-scale exemptions to statutory regimes and clarifying their enforcement discretion • Thinking locally and preparing publicly • Sharing the steps being taken to promote (as well as to anticipate and regulate) automated driving • Instituting public education about automated vehicle technologies.

Intercity Passenger Carrier Improvement Study, Final Report, 1977

The goal of this research was to recommend specific changes relating to service by intercity buses and third level air carriers to propose an appropriate state role in the implementation of changes. Changes contemplated in this research were to be directed to the increased use of intercity buses and third level air carriers in such manner as to exert a benefit to user as well as the general public. Specific objectives of the project included: (1) to analyze the potential for a system of express intercity bus routes in Iowa; (2) to estimate the demand for third level air carrier services in cities having populations under 50,000; (3) to forecast the relationship between economic costs and benefits from an intercity bus system emphasizing express routes between major population centers and supporting a subsystem of local and intraregional public transportation; (4) to estimate the economic feasibility of expanded third level air carrier service with emphasis upon those routes proposed as worth of further evaluation; and (5) to provide guidance for establishing the need for state and local subsidies to institute a system of express intercity buses and to expand third level air carrier services. In addition to passenger movements, enhancing package freight shipments was also to be considered in the evaluation of proposed improvements.

Multimodal Investment Analysis Methodology, Phase One: The Conceptual Model, 1998

The purpose of this project is to develop an investment analysis model that integrates the capabilities of four types of analysis for use in evaluating interurban transportation system improvements. The project will also explore the use of new data warehousing and mining techniques to design the types of databases required for supporting such a comprehensive transportation model. The project consists of four phases. The first phase, which is documented in this report, involves development of the conceptual foundation for the model. Prior research is reviewed in Chapter 1, which is composed of three major sections providing demand modeling background information for passenger transportation, transportation of freight (manufactured products and supplies), and transportation of natural resources and agricultural commodities. Material from the literature on geographic information systems makes up Chapter 2. Database models for the national and regional economies and for the transportation and logistics network are conceptualized in Chapter 3. Demand forecasting of transportation service requirements is introduced in Chapter 4, with separate sections for passenger transportation, freight transportation, and transportation of natural resources and commodities. Characteristics and capacities of the different modes, modal choices, and route assignments are discussed in Chapter 5. Chapter 6 concludes with a general discussion of the economic impacts and feedback of multimodal transportation activities and facilities.

Lisäpoltolla varustetun maakaasukombivoimalaitoksen optimointi.

Voimalaitoksen sisäisellä optimoinnilla pyritään parantamaan prosessia ja lisäämään voimalaitoskonseptin kilpailukykyä energiamarkkinoilla. Tässä työssä optimoitiin lisäpoltolla varustettua, sähköteholtaan noin 125 MW:n maakaasukompivoimalaitosta. Työ on osa Fortum Engineering Oy:n konseptikehitysohjelmaa. Kaasuturbiinin savukaasun sisältämää happea voidaan hyödyntää lämmöntal-teenottokattilan savukaasukanavaan sijoitetussa lisäpoltossa. Lisäpoltolla saadaan nostettua savukaasun lämpötilaa ja lisättyä tuotetun tuorehöyryn määrää. Työssä tutkittiin lisäpolton kannattavuutta ja sen vaikutusta voimalaitoksen mitoitukseen. Lisäpolton lämpötila valitaan teknisten rajoitusten perusteella, jolloin siitä aiheutuvat investointikustannukset eivät nouse merkittäviksi. Optimointimenetelmä pohjautuu Fortum Oyj:ssä kehitetyllä voimalaitossimulaattori Solvolla laskettujen lämpötaseiden ja asiantuntija-arvioihin perustuvien investointikustannuskaavojen käyttöön. Taloudelliset lähtöarvot on valittu Itä-Euroopan markkinatilanteen mukaisiksi. Kannattavuuslaskelmat perustuvat nykyarvomenetelmään, jossa investointikustannuksille ja sähkön ja kaukolämmön myynnistä saaduille tuotoille lasketaan nykyarvo. Teknisten rajoitusten puitteissa suurimman nykyarvon antava tapaus on aina kunkin tutkittavan prosessisuureen optimitapaus. Tutkittavia prosessisuureita voivat olla esimerkiksi tuorehöyryn tila-arvot. Eräs työn tavoitteista oli selvittää lämmöntalteenottokattilan painetasojen optimaalinen lukumäärä. Lisäpoltto todettiin lämmitysvoimalaitoksella kannattavaksi ratkaisuksi kun nyt optimoitua laitosta verrattiin ilman lisäpolttoa mitoitettuun vastaavanlaiseen laitokseen. Kannattavuuslaskelmille tehtiin herkkyystarkastelut, joiden avulla tutkittiin mitoitetun konseptin herkkyyttä taloudellisten lähtöarvojen muutoksille. Herkkyysanalyysin avulla optimoitua voimalaitoskonseptia voidaan hyödyntää suuremmalla taloudellisten lähtöarvojen vaihteluvälillä.