Função pulmonar de crianças com leucemia aguda

Introduction: The leukemias are the most common malignancy in children and adolescents. With the improvement in outcomes, there is a need to consider the morbidity to generate the protocols used in children under treatment. Aim: To evaluate pulmonary function in children with acute leukemia. Method: This study is an observational cross sectional. We evaluated 34 children distributed in groups A and B. Group A comprised 17 children with acute leukemia in the maintenance phase of chemotherapy treatment and group B with 17 healthy students from the public in the city of Natal / RN, matched for gender, age and height. The thoracic mobility was evaluated by thoracic expansion in the axillary and xiphoid levels. Spirometry was measured using a spirometer Microloop Viasys ® following the rules of the ATS and ERS. Maximal respiratory pressures were measured with digital manometer MVD300 (Globalmed ®). The maximal inspiratory pressure (MIP) and maximal expiratory pressure (MEP) were measured from residual volume and total lung capacity, respectively. The data were analyzed using the SPSS 17.0 software assigning the significance level of 5%. Descriptive analysis was expressed as mean and standard deviation. T'student test was used to compare unpaired values found in group A with group B values, as well as with the reference values used. To compare the respiratory coefficients in the axillary level with the xiphoid in each group, we used paired testing t student. Results: Group A was significantly decreased thoracic mobility and MIP compared to group B, and MIP compared to baseline. There was no significant difference between spirometric data from both groups and the values of group A with the reference values Mallozi (1995). There was no significant difference between the MIP and MEP values and lower limits of reference proposed by Borja (2011). Conclusion: Children with acute leukemia, myeloid or lymphoid, during maintenance phase of chemotherapy treatment have reduced thoracic mobility and MIP. However, to date, completion of clinical treatment, the spirometric variables and the strength of the expiratory muscles appear to remain preserved in children between five and ten years

Oxygen diffusion in superconducting oxides

Since the discovery of high-temperature superconductivity of cuprate oxides, it has been clear that it is strongly affected by the oxygen content, which is also a crucial factor to determine other physical properties of high T-c superconductors. Non-stoichiometric (interstitial) oxygen strongly influences the physical properties of various superconducting oxides, in particular by creating conducting holes. It is now ascertained that the amount of holes injected depends not only on the content of interstitial oxygen, but also on its ordering. Rearrangement of the oxygen ordering may occur even below room temperature due to the unusual high mobility of these atoms. This way, mechanical spectroscopy is one of the most adequate techniques for the study of the mobility (diffusion) of oxygen atoms. This technique allows the determination of the jump frequency of an atomic species precisely, regardless of the model or the different possible types of jumps. In order to evaluate the mobility and the effect of oxygen content on these oxides, ceramic samples we prepared and submitted to several oxygen removal cycles alternately with mechanical relaxation measurements. As for SBCO, it was assumed that the peak was due to O(1)-O(5) jumps of oxygen atoms at the chain terminals or in chain fragments in the orthorhombic phase. In the case of BSCCO, the results showed complex anelastic relaxation structures, which were attributed to interstitial oxygen atom jumps between two adjacent CuO planes.

Uma plataforma de integração de middleware para computação ubíqua

One of the current challenges of Ubiquitous Computing is the development of complex applications, those are more than simple alarms triggered by sensors or simple systems to configure the environment according to user preferences. Those applications are hard to develop since they are composed by services provided by different middleware and it is needed to know the peculiarities of each of them, mainly the communication and context models. This thesis presents OpenCOPI, a platform which integrates various services providers, including context provision middleware. It provides an unified ontology-based context model, as well as an environment that enable easy development of ubiquitous applications via the definition of semantic workflows that contains the abstract description of the application. Those semantic workflows are converted into concrete workflows, called execution plans. An execution plan consists of a workflow instance containing activities that are automated by a set of Web services. OpenCOPI supports the automatic Web service selection and composition, enabling the use of services provided by distinct middleware in an independent and transparent way. Moreover, this platform also supports execution adaptation in case of service failures, user mobility and degradation of services quality. The validation of OpenCOPI is performed through the development of case studies, specifically applications of the oil industry. In addition, this work evaluates the overhead introduced by OpenCOPI and compares it with the provided benefits, and the efficiency of OpenCOPI s selection and adaptation mechanism

Evolving Future Internet clean-slate Entity Title Architecture with quality-oriented control-plane extensions

A Internet atual vem sofrendo vários problemas em termos de escalabilidade, desempenho, mobilidade, etc., devido ao vertiginoso incremento no número de usuários e o surgimento de novos serviços com novas demandas, propiciando assim o nascimento da Internet do Futuro. Novas propostas sobre redes orientadas a conteúdo, como a arquitetura Entidade Titulo (ETArch), proveem novos serviços para este tipo de cenários, implementados sobre o paradigma de redes definidas por software. Contudo, o modelo de transporte do ETArch é equivalente ao modelo best-effort da Internet atual, e vem limitando a confiabilidade das suas comunicações. Neste trabalho, ETArch é redesenhado seguindo o paradigma do sobreaprovisionamento de recursos para conseguir uma alocação de recursos avançada integrada com OpenFlow. Como resultado, o framework SMART (Suporte de Sessões Móveis com Alta Demanda de Recursos de Transporte), permite que a rede defina semanticamente os requisitos qualitativos das sessões para assim gerenciar o controle de Qualidade de Serviço visando manter a melhor Qualidade de Experiência possível. A avaliação do planos de dados e de controle teve lugar na plataforma de testes na ilha do projeto OFELIA, mostrando o suporte de aplicações móveis multimídia com alta demanda de recursos de transporte com QoS e QoE garantidos através de um esquema de sinalização restrito em comparação com o ETArch legado

Território usado e transporte coletivo : mobilidade e acessibilidade no Bairro Lagoa Azul Natal/RN

Transport systems involved the use of territory in different Brazilian cities with regard to the occupation of road systems in urban areas. The implementation of systems engineering and transport infrastructure such as roads (roads), signs, stops, stations and complex road (bridges, viaducts and tunnels) are not used in the same way in the area. The subway is not even use the bus and vice versa. The time spent in travel, the time to access and the number of trips made by passengers in each way of transport is not the same. The use of transport systems in the territory, therefore, takes place through a whole in the current period we are in the technicalscientific and informational. This work addresses, however, the area used as a synonym of geographical area, analyzed by two categories of analysis, systems of objects formed by the fixed and the systems formed by the action flows. The system analyzed is the public transport by bus and population displacement that makes using this medium with source destination from home to work and has as empirical cut the Lagoa Azul located in the district administrative area north of Natal / RN. The general objective of this research is to understand the extent to which public transport has contributed to the socio-spatial accessibility of the residents of Barrio Blue Lagoon, located in Natal-RN, emphasizing the way home and the workplace. To reach the general objective of this dissertation, a study was made in light of the line which the methodological empirical facts, statistical data and theoretical knowledge of the events that occur in the quarter related to the Lagoa Azul economic aspects. Use for this, the concepts of mobility and Accessibility

Fatores associados à doença pulmonar em idosos

OBJETIVO: Investigar a prevalência de doença pulmonar referida entre idosos segundo características sociodemográficas, econômicas, estilo de vida, mobilidade física e condições de saúde. MÉTODOS: Trata-se de um estudo transversal, de base populacional, do qual participaram 1.957 idosos (60 anos ou mais). As informações foram coletadas por meio de entrevistas. Os participantes foram selecionados a partir de amostragem probabilística, estratificada, por conglomerados e obtida em dois estágios em seis municípios do Estado de São Paulo, no período de 2001 a 2002. Foram utilizadas estatísticas descritivas, testes de associação pelo chi2, razões de prevalência e intervalos de confiança de 95%. A análise ajustada foi conduzida por meio de regressão de Poisson. RESULTADOS: Dos entrevistados, cerca de 7% referiram doença pulmonar. Não houve associação entre doença pulmonar referida e vacinação contra influenza. A partir da análise ajustada foi possível identificar os seguintes fatores independentemente associados à referência da doença: tabagismo (RP=2,03; IC 95%: 1,39-2,97); uso de medicamentos (RP=2,05; IC 95%: 1,11-3,79); auto-avaliação do estado de saúde atual como ruim ou muito ruim (RP=1,89; IC 95%:1,20-2,96); e depressão, ansiedade ou problemas emocionais (RP=1,86; IC 95%: 1,11-3,10). CONCLUSÕES: Os achados do presente estudo reforçam a importância das doenças respiratórias em idosos, particularmente em grupos mais vulneráveis, justificando medidas preventivas e assistenciais específicas.

Movements of bats (Mammalia, Chiroptera) in Atlantic Forest remnants in southern Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Esthetic Interim Acrylic Resin Prosthesis Reinforced with Metal Casting

Fabrication of an interim prosthesis is an important procedure in oral rehabilitation because it aids in determining the esthetics, phonetics, and occlusal relationship of the definitive restoration. The typical material (acrylic resin) used in interim prostheses commonly fails due to fractures. During extended oral rehabilitation with fixed partial prostheses, high strength interim prostheses are often required to protect hard and soft tissues, avoid dental mobility, and to allow the clinician and patient a chance to evaluate cosmetics and function before the placement of the definitive prosthesis. Furthermore, a satisfactory interim prosthesis can serve as a template for the construction of the definitive prosthesis. The maintenance of this prosthesis is important during treatment for protection of teeth and occlusal stability. Procedures to reinforce interim prostheses help to improve performance and esthetics in long-term treatment. Due to the low durability of acrylic resin in long-term use, the use of reinforcing materials, such as metal castings or spot-welded stainless steel matrix bands, is indicated in cases of extensive restoration and long-term treatment. This paper describes an easy technique for fabricating a fixed interim prosthesis using acrylic resin and a cast metallic reinforcement.

Detection of volatile organic compounds using a polythiophene derivative

Conjugated polymers have been subject of great interest in the recent literature from both fundamental point of view and applied science perspective. Among the several types of conjugated polymers used in recent investigations, polythiophene and its derivatives have attracted considerable attention over the past 20 years due to their high mobility and other remarkable solid-state properties. They have potential applications in many fields, such as microelectronic devices, catalysts, organic field-effect transistors, chemical sensors, and biosensors. They have been studied as gas and volatile organic compounds (VOCs) sensors using different principles or transduction techniques, such as optical absorption, conductivity, and capacitance measurements. In this work, we report on the fabrication of gas sensors based on a conducting polymer on an interdigitated gold electrode. We use as active layer of the sensor a polythiophene derivative: poly (3-hexylthiophene) (P3HT) and analyzed its conductivity as response for exposure to dynamic flow of saturated vapors of six VOCs [n-hexane, toluene, chloroform, dichloromethane, methanol, and tetrahydrofuran (THE)]. Different responses were obtained upon exposure to all VOCs, THF gave the higher response while methanol the lower response. The influence of moisture on the measurements was also evaluated. (C) 2010 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim

Flutuação populacional de adultos de Anastrepha fraterculus (Wied.) em cultivo protegido e convencional de videira

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Indium tin oxide films prepared via wet chemical route

In this work, indium tin oxide (ITO) films were prepared using a wet chemical route, the Pechini method. This consists of a polyesterification reaction between an alpha-hydroxicarboxylate complex (indium citrate and tin citrate) with a polyalcohol (ethylene glycol) followed by a post annealing at 500 degrees C. A 10 at.% of doping of Sn4+ ions into an In2O3 matrix was successfully achieved through this method. In order to characterize the structure, the morphology as well as the optical and electrical properties of the produced ITO films, they were analyzed using different experimental techniques. The obtained films are highly transparent, exhibiting transmittance of about 85% at 550 nm. They are crystalline with a preferred orientation of [222]. Microscopy discloses that the films are composed of grains of 30 nm average size and 0.63 nm RMS roughness. The films' measured resistivity, mobility and charge carrier concentration were 5.8 x 10(-3) Omega cm, 2.9 cm(2)/V s and -3.5 x 10(20)/cm(3), respectively. While the low mobility value can be related to the small grain size, the charge carrier concentration value can be explained in terms of the high oxygen concentration level resulting from the thermal treatment process performed in air. The experimental conditions are being refined to improve the electrical characteristics of the films while good optical, chemical, structural and morphological qualities already achieved are maintained. (C) 2007 Elsevier B.V. All rights reserved.

CHOLESTEROL MODULATION OF LIPID PROTEIN INTERACTIONS IN LIVER MICROSOMAL MEMBRANE - A SPIN LABEL STUDY

ESR spectra of spin probes were used to monitor lipid-protein interactions in native and cholesterol-enriched microsomal membranes. In both systems composite spectra were obtained, one characteristic of bulk bilayer organization and another due to a motionally restricted population, which was ascribed to lipids in a protein microenvironment. Computer spectral subtractions revealed that cholesterol modulates the order/mobility of both populations in opposite ways, i.e., while the lipid bilayer region gives rise to more anisotropic spectra upon cholesterol enrichment, the spectra of the motionally restricted population become indicative of increased mobility and/or decreased order. These events were evidenced by measurement of both effective order parameters and correlation times. The percentages of the motionally restricted component were invariant in native and cholesterol-enriched microsomes. Variable temperature studies also indicated a lack of variation of the percentages of both spectral components, suggesting that the motionally restricted one was not due to protein aggregation. The results correlate well with the effect of cholesterol enrichment on membrane-bound enzyme kinetics and on the behavior of fluorescent probes [Castuma & Brenner (1986) Biochemistry 25, 4733-4738]. Several hypothesis are put forward to explain the molecular mechanism of the cholesterol-induced spectral changes.

Tooth separation: A risk-free procedure?

This article reports the case of a 12-year-old patient with tooth extrusion, pain, gingival bleeding, and localized periodontitis near the maxillary second premolar. Despite probing and radiographic examination, it was not possible to establish the etiology. Tooth extraction was indicated because of the severe tooth mobility and extrusion. Curettage of the tooth socket revealed a rubber separator. Preventive approaches are suggested to avoid iatrogenesis and legal problems. (Am J Orthod Dentofacial Orthop 2012; 142:402-5)

Bacterial cellulose membrane as flexible substrate for organic light emitting devices

Bacterial cellulose (BC) membranes produced by gram-negative, acetic acid bacteria (Gluconacetobacter xylinus), were used as flexible substrates for the fabrication of Organic Light Emitting Diodes (OLED). In order to achieve the necessary conductive properties indium tin oxide (ITO) thin films were deposited onto the membrane at room temperature using radio frequency (r.f) magnetron sputtering with an r.f. power of 30 W, at pressure of 8 mPa in Ar atmosphere without any subsequent thermal treatment. Visible light transmittance of about 40% was observed. Resistivity, mobility and carrier concentration of deposited ITO films were 4.90 x 10(-4) Ohm cm, 8.08 cm(2)/V-s and -1.5 x 10(21) cm(-3), respectively, comparable with commercial ITO substrates. In order to demonstrate the feasibility of devices based on BC membranes three OLEDs with different substrates were produced: a reference one with commercial ITO on glass, a second one with a SiO(2) thin film interlayer between the BC membrane and the ITO layer and a third one just with ITO deposited directly on the BC membrane. The observed OLED luminance ratio was: 1; 0.5; 0.25 respectively, with 2400 cd/m(2) as the value for the reference OLED. These preliminary results show clearly that the functionalized biopolymer, biodegradable, biocompatible bacterial cellulose membranes can be successfully used as substrate in flexible organic optoelectronic devices. (C) 2008 Elsevier B.V. All rights reserved.

Effect of posture-control insoles on function in children with cerebral palsy: Randomized controlled clinical trial

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)