Evaluation of Brazilian woods as an alternative to oak for cachacas aging

Cachaca was aged for 6 months in small casks of oak and eight different Brazilian woods (amarelo, amendoim, balsamo, jatoba, louro, pau d'arco, pau d'oleo, and pereiro) in order to determine total phenols, UV-visible spectra differences, and sensorial acceptance. Also used were 200-l casks of oak and pereiro for aging cachaca for 4 years to characterize sensorial descriptors and acceptance. The results suggest that amendoim and pereiro followed by jatobaa are good candidates to replace oak in the construction of cachaca aging casks. It was also observed that when using oak casks as a standard the major changes in the sensory properties occurred in the first 21 months of aging. The principal components analysis of UV-visible absorption spectra of the same beverage stored in casks made of different woods allowed identification of the wood in which the beverage had been aged.

On the birth of a closed hyperbolic universe

We clarify and develop the results of a previous paper on the birth of a closed universe of negative spatial curvature and multiply connected topology. In particular we discuss the initial instanton and the second topology change in more detail, This is followed by a short discussion of the results.

Photolumiscent Properties of Nanorods and Nanoplates Y2O3:Eu3+

Nanorods and nanoplates of Y2O3:Eu3+ powders were synthesized through the thermal decomposition of the Y(OH)(3) precursors using a microwave-hydrothermal method in a very short reaction time. These powders were analyzed by X-ray diffraction, field emission scanning electron microscopy, Fourrier transform Raman, as well as photoluminescence measurements. Based on these results, these materials presented nanoplates and nanorods morphologies. The broad emission band between 300 and 440 nm ascribed to the photoluminescence of Y2O3 matrix shifts as the procedure used in the microwave-hydrothermal assisted method changes in the Y2O3:Eu3+ samples. The presence of Eu3+ and the hydrothermal treatment time are responsible for the band shifts in Y2O3:Eu3+ powders, since in the pure Y2O3 matrix this behavior was not observed. Y2O3:Eu3+ powders also show the characteristic Eu3+ emission lines at 580, 591, 610, 651 and 695 nm, when excited at 393 nm. The most intense band at 610 nm is responsible for the Eu3+ red emission in these materials, and the Eu3+ lifetime for this transition presented a slight increase as the time used in the microwave-hydrothermal assisted method increases.

Synthesis, characterization, thermal studies, and DFT calculations on Pd(II) complexes containing N-methylbenzylamine

This work describes the synthesis, characterization, and the thermal behavior investigation of four palladium(II) complexes with general formulae [PdX(2)(mba)(2)], in which mba = N-methylbenzylamine and X = OAc(-) (1), Cl(-) (2), Br(-) (3) or I(-) (4). The complexes were characterized by elemental analysis, infrared vibrational spectroscopy, and (1)H nuclear magnetic resonance. The stoichiometry of the complexes was established by means of elemental analysis and thermogravimetry (TG). TG/DTA curves showed that the thermodecomposition of the four complexes occurred in 3-4 steps, leading to metallic palladium as final residue. The palladium content found in all curves was in agreement with the mass percentages calculated for the complexes. The following thermal stability sequence was found: 3 > 2 > 4 > 1. The geometry optimization of 1, 2, 3, and 4, calculated using the DFT/B3LYP method, yielded a slightly distorted square planar environment around the Pd(II) ion made by two anionic groups and two nitrogen atoms from the mba ligand (N1 and N2), in a trans-relationship.

Comparison of behavioral and clinical effects of intravenous amitraz or romifidine administration in horses

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Interpolating EFGM for computing continuous and discontinuous electromagnetic fields

Purpose - This paper proposes an interpolating approach of the element-free Galerkin method (EFGM) coupled with a modified truncation scheme for solving Poisson's boundary value problems in domains involving material non-homogeneities. The suitability and efficiency of the proposed implementation are evaluated for a given set of test cases of electrostatic field in domains involving different material interfaces.Design/methodology/approach - the authors combined an interpolating approximation with a modified domain truncation scheme, which avoids additional techniques for enforcing the Dirichlet boundary conditions and for dealing with material interfaces usually employed in meshfree formulations.Findings - the local electric potential and field distributions were correctly described as well as the global quantities like the total potency and resistance. Since, the treatment of the material interfaces becomes practically the same for both the finite element method (FEM) and the proposed EFGM, FEM-oriented programs can, thus, be easily extended to provide EFGM approximations.Research limitations/implications - the robustness of the proposed formulation became evident from the error analyses of the local and global variables, including in the case of high-material discontinuity.Practical implications - the proposed approach has shown to be as robust as linear FEM. Thus, it becomes an attractive alternative, also because it avoids the use of additional techniques to deal with boundary/interface conditions commonly employed in meshfree formulations.Originality/value - This paper reintroduces the domain truncation in the EFGM context, but by using a set of interpolating shape functions the authors avoided the use of Lagrange multipliers as well Mathematics in Engineering high-material discontinuity.

Microstructure of organometallic derived PLZT ceramics

The PLZT powders with the formula Pb0.905La0.095(Zr0.65Ti0.35)(0.976)O-3+3.5 wt.% PbO were prepared by the organometallic precursor method (Pechini and partial oxalate processes). The microstructure of sintered 9.5/65/35 PLZT ceramics obtained from a partial oxalate procedure shows that the outstanding feature of this microstructure is its fairly uniform grains of about 1.8 mum. The microstructure of sintered PLZT ceramics obtained by the Pechini process consists of uniform small randomly- oriented grains tightly bonded together in the central part of the sample with,a grain size of about 1.2 mum. Cubic and elongated grains are formed at the sample's border. The microstructures of hot pressed PLZT ceramics obtained from both processes are dense and rather uniform. After a double stage of hot pressing (2 plus 20 h) the microstructure of PLZT is fully dense, uniform and homogeneous with a grain size of approximately 2.5 mum. (C) 2001 Elsevier B.V. Ltd. All rights reserved.

Consequences of refuge for the functional response of Dermestes ater (Coleoptera : Dermestidae) to Musca domestica (Diptera : Muscidae)

It is well known that a predator has the potential to regulate a prey population only if the predator responds to increases in prey density and inflicts greater mortality rates. Predators may cause such density-dependent mortality depending on the nature of the functional and numerical responses. Yet, few studies have examined the relationship between the addition of refuges and the characteristic of functional response fits. We investigated whether addition of a refuge changed the type of functional response exhibited by Dermestes ater on Musca domestica, comparing the inherent ability of D. ater to kill houseflies in the absence and in the presence of refuge. An additional laboratory experiment was also carried out to assess handling and searching times exhibited by D. ater. Logistic regression analyses revealed a type III functional response for predator-prey interaction without refuge, and results were described by the random predator equation. The mean number of prey killed did not differ between experimental habitats, indicating that the addition of refuge did not inhibit predation. However, predators that interacted with prey without refuge spent less time searching for prey at higher densities, increasing predatory interaction. We concluded that this interaction may be weak, because data from experiments with refuge fitted poorly to models. However, the high variability and the nonsignificance of the data from the experiment with refuge show the importance of refuge for promoting spatial heterogeneity, which may prevent prey extinction.

Sentinel node mapping in a pregnant woman with cervical cancer: a case report

The possibility of reducing morbidity associated with surgical dissection while maintaining accurate tumor staging is one of the greatest advantages of the sentinel node approach in surgical oncology. The sentinel node mapping has already proven to be useful in melanoma, breast cancer, and vulvar cancer. We report the first case of sentinel node detection by technetium-labeled radiocolloid in a pregnant woman with cervical cancer. The histologic analysis of the operative specimen showed a poorly differentiated squamous carcinoma with metastasis in the sentinel node and a neoplasic embolus in a blood vessel of the placental bed. The lymphatic mapping and sentinel lymph node detection are feasible during pregnancy.

Acid Black 48 dye biosorption using Saccharomyces cerevisiae immobilized with treated sugarcane bagasse

The textile industry consumes large quantities of water and chemicals, especially in dyeing and finishing processes. Textile dye adsorption can be accomplished with natural or synthetic compounds. Cell immobilization using biomaterials allows the reduction of toxicity and mechanical resistance and opens spaces within the matrix for cell growth. The use of natural materials, such as sugarcane bagasse, is promising due to the low costs involved. The aim of the present study was to evaluate the use of sugarcane bagasse treated with either polyethyleneimine (PEI), NaOH or distilled water in the cell immobilization of Saccharomyces cerevisiae for textile dye removal. Three different adsorption tests were conducted: treated sugarcane bagasse alone, free yeast cells and bagasse-immobilized yeast cells. Yeast immobilization was 31.34% with PEI-treated bagasse, 8.56% with distilled water and 22.54% with NaOH. PEI-treated bagasse exhibited the best removal rates of the dye at all pH values studied (2.50, 4.50 and 6.50). The best Acid Black 48 adsorption rates were obtained with use of free yeast cells. At pH 2.50, 1 mg of free yeast cells was able to remove 5488.49 g of the dye. The lowest adsorption capacity rates were obtained using treated bagasse alone. However, the use of bagasse-immobilized cells increased adsorption efficiency from 20 to 40%. The use of immobilized cells in textile dye removal is very attractive due to adsorbed dye precipitation, which eliminates the industrial need for centrifugation processes. Dye adsorption using only yeast cells or sugarcane bagasse requires separation methods.

Stimulation of polygalacturonase production in an immobilized system by Aspergillus sp.: effect of pectin and glucose

The synthesis of polygalacturonases (PG) is known to be influenced by Aspergillus growth conditions, namely, environmental factors and pectin content in the cultivation medium containing a mixed carbon source. Optimal conditions were attained at a temperature of 30 A degrees C and an initial pH of 4.5. PG activity (3.29 and 2.48 U/mL) was determined after a two-day culture of Aspergillus sp. HC1 and Aspergillus sp. CC1, respectively, in a basic medium containing 2% citrus pectin as the sole carbon source. The addition of glucose (2% w/v) to the basic medium led to a 2-fold increase in PG production. However, enzyme synthesis was repressed when a higher concentration of glucose was used in the medium containing the mixed carbon source. Spores from the two fungi were immobilized in a 3% Ca-alginate system and the mechanical strength of the gel beads allowed the use of this process system 6-fold longer (288 h) than the free culture. In the Aspergillus sp. CC1 immobilized system, PG production increased nearly 10-fold in the medium with 2% glucose added (5.95 U/mL) in comparison to the medium without sugar (0.55 U/mL). The results demonstrate that a different response in activity was produced by free and entrapped spore systems. PG production remained approximately constant throughout the six 48 h cycles in the medium containing citrus pectin (2% w/v) as the sole carbon source.

Development of a novel fermented soymilk product with potential probiotic properties

The study was carried out to test the ability of Enterococcus faecium, Lactobacillus acidophilus, L. jugurti, Streptococcus thermophilus and L. delbrueckii ssp bulgaricus to decrease cholesterol in vitro and to grow in the presence of bile salts. Both properties were dependent on the species under study. The cultures were also inoculated into soymilk fortified with dry milk whey powder as single or mixed starters. The physicochemical and sensory evaluations of the fermented products showed that E. faecium plus L. jugurti (ratio 1:1) is the best combination, and this mixture also produces a 43% decrease in cholesterol. © Springer-Verlag 1999.

Electrospray ionization mass spectrometry screening of piperidine alkaloids from Senna spectabilis (Fabaceae) extracts: Fast identification of new constituents and co-metabolites

The fragmentation pattern of a homologous series of piperidine alkaloids isolated from S. spectabilis was investigated using electrospray ionization tandem mass spectrometry (ESI-MS/MS). The ESI-MS and ESI-MS/MS analyses of EtOH extracts and fractions from flowers and fruits of S. spectabilis allowed to elucidate the structures of four new compounds. The identification of these co-metabolites, based on the fragmentation patterns of previously isolated compounds, and further confirmed by accurate mass spectrometry defines this technique as a powerful tool to determine the metabolomic profile of species which has pharmacological importance. ©2005 Sociedade Brasileira de Química.

Telomerase activity in the vaginal margins of radical hysterectomy in patients with carcinoma of the cervix: Correlation with histology and human papillomavirus

This study was undertaken to evaluate the telomerase activity both in the tumor and in the vaginal margins of radical hysterectomy in patients with squamous cell carcinoma (SCC) of the cervix. Thirty-three patients with SCC of the cervix (study group) and 13 patients with uterine myoma (control group) were prospectively studied. Tissue samples were taken from the tumor or cervix, anterior vaginal margin (AVM), and posterior vaginal margin (PVM). The specimens were analyzed by histopathology, by a telomerase PCR-TRAP-ELISA kit, and by polymerase chain reaction using human papillomavirus (HPV) DNA. The telomerase activity was significantly higher in the tumor than in the benign cervix (P < 0.001). There was no difference in telomerase activity in the AVM and PVM in patients with cervical carcinoma compared to the control group. Telomerase activity was associated with the presence of histologic malignancy in the PVM of patients submitted to radical hysterectomy (P = 0.03). This association was not observed with the presence of HPV in AVM or PVM in the study group. Telomerase activity is a marker of histologic malignancy in patients with SCC of the cervix. There was no association between the telomerase activity and the presence of HPV in vaginal margins of patients submitted to radical hysterectomy. © 2006, Copyright the Authors.