Toxoplasmosis serology: an efficient hemagglutination procedure to detect IgG and IgM antibodies

In search of an efficient but simple, low cost procedure for the serodiagnosis of Toxoplasmosis, especially suited for routine laboratories facing technical and budget limitations as in less developed countries, the diagnostic capability of Hematoxo® , an hemagglutination test for toxoplasmosis, was evaluated in relation to a battery of tests including IgG- and IgM-immunofluorescence tests, hemagglutination and an IgM-capture enzymatic assay. Detecting a little as 5 I.U. of IgG antitoxoplasma antibodies, Hematoxo® showed a straight agreement as to reactivity and non-reactivity for the 443 non-reactive and the 387 reactive serum samples, included in this study. In 23 cases presenting a serological pattern of acute toxoplasmosis and showing IgM antibodies, Hematoxo® could detect IgM antibodies in 18, indicated by negativation or a significant decrease in titers as a result of treating samples with 2-mercapto-ethanol. However, a neat increase in sensitivity for IgM specific antibodies could be achieved by previously removing IgG from the sample, as demonstrated in a series of acute toxoplasmosis sera. A simple procedure was developed for this purpose, by reconstituting a lyophilized suspension of Protein A - rich Staphylococcus with the lowest serum dilution to be tested. Of low cost and easy to perform, Hematoxo® affords not only a practical qualitative procedure for screening reactors and non-reactors, as in prenatal services, but also quantitative assays that permit to titrate antibodies as well as to identify IgM antibodies.

Simplification of Immune Adherence Hemagglutination test for detection of rabies antibodies in human serum

In the present work the immune adherence hemagglutination test (IAHA) was standardized in a simplified procedure. This test showed good reproducibility, better than the classical mice serum neutralization test (SN). The tests showed high correlation degree: high titers in one test corresponded to high titers in the other one, and the same occured with low titers. The IAHA test is extremely simple, fast to perform, and of low cost when compared to tests such as SN or indirect immunofluorescense (IIF). It also proved to be useful in less sophisticated laboratories or even as a screening test for the titration of rabies antibodies.

Web marketing: desenvolvimento de uma presença online para uma unidade hoteleira – Projeto Oporto Invictus Hostel

O hotel, para muitos autores, tem como função oferecer abrigo para quem está distante da sua casa e atender às suas necessidades básicas. A hotelaria tem como função básica alojar as pessoas que estão longe da sua residência e que precisam de um quarto com uma cama para dormir e uma casa de banho (Duarte, 1996). Para Beni (2003), um hotel, além de ter a função básica de alojar, tem uma característica que nenhum outro estabelecimento comercial possui, que é o facto de o consumidor se deslocar até ao hotel para poder utilizar os serviços disponíveis. Outra característica muito especifica da atividade hoteleira, é o facto de o atendimento ser o mais importante na hora da prestação do serviço. O Hostel é uma designação muito usada atualmente como sinónimo de albergue. É um tipo de unidade hoteleira que se caracteriza pelos preços convidativos e pela possibilidade de socialização dos hóspedes, onde cada hóspede pode arrendar uma cama ou beliche, num dormitório partilhado, com casa de banho, lavandaria e, por vezes, cozinha, também em regime partilhado. Os Hostels são geralmente económicos praticando preços intitulados low-­‐cost. Definir uma estratégia para a Internet é hoje um imperativo para qualquer organização que pretenda utilizar este canal de comunicação para promover a sua atividade. As unidades hoteleiras também não são exceção; a necessidade de comunicar com os públicos alvo no sentido de aumentarem a captação de turistas exige uma presença na Internet que consiga simultaneamente informar e motivar à escolha pelos serviços prestados. A Internet evidencia um incontornável potencial informativo e comunicativo em questões de rapidez de circulação: número de pessoas que atinge e áreas geográficas que abarca; e devido às suas características de imaterialidade, instantaneidade e multimédia, democratiza o acesso à informação e a determinados tipos de bens, facilita a comunicação entre pessoas e instituições e universaliza as oportunidades, eliminando as barreiras espaciais, geográficas e temporais (Balsa, 2007). Rapidamente as unidades hoteleiras se aperceberam das vantagens e potencialidades da Internet: rápida, imediata, económica, integrada no dia-­‐a-­‐dia de trabalho e lazer e acessível a um cada vez maior número de pessoas. A nível geral, mas com especial incidência no caso das unidades hoteleiras, a Internet apresenta inúmeras vantagens ao nível da estruturação da informação em bases de dados e da sua apresentação dinâmica, tirando partido da inclusão de objetos multimédia em páginas HTML. Os objetos multimédia podem incluir áudio, vídeo,animações em tecnologia Flash e mesmo animações 3D tornando a visita a um sítio Web com este tipo de conteúdos, uma experiência muito gratificante. Por sua vez, a interatividade, característica do próprio funcionamento das páginas Web, facilita a interação entre a unidade hoteleira e o visitante. A interatividade permite ou facilita uma relação ativa entre o utilizador e o hotel. O utilizador passa de espectador passivo a interveniente ativo no processo de consulta da informação. Na web, os avanços tecnológicos têm sido constantes. Em 1980, Alvin Toffler’s no seu bestseller ‘The Third Wave’ previu um novo tipo de consumidor a quem chamou de ‘prosumer’ e que seria um misto de DIY (do-­it-­yourself) produtor e consumidor em mercados offline (Toffler, 1980). Foi sem dúvida de uma grande visão, mas sem os recentes avanços na web e nas tecnologias digitais, a maioria dos utilizadores não poderia ter dado o salto de espectador passivo para ator que participa ativamente na construção da web (Shuen, 2008). O aparecimento das redes sociais que permitem criar comunidades com interesses afins, o desenvolvimento de plataformas como o Youtube.com para a partilha de vídeos, a vulgarização de plataformas como o flickr.com para a partilha de imagens constituíram marcos determinantes para aquilo a que se designa por WEB 2.0 (tecnologia do século XXI). Enquanto no tempo da WEB 1.0 (tecnologia dos anos 90) os sites eram essencialmente estáticos e a interatividade não era levada aos limites, agora com a WEB 2.0 é possível construir modelos de negócio com conteúdos mais ricos simulando, com muito maior realismo, em ambientes virtuais, o que se passa em ambientes reais. Os sítios Web das unidades hoteleiras estão a evoluir rapidamente para um modelo que contemple as potencialidades da WEB 2.0 Tendo em consideração a importância das unidades hoteleiras no panorama do turismo, a relevância da Internet como meio de comunicação entre as instituições e os cidadãos e a necessidade das unidades hoteleiras disporem de uma estratégia de comunicação digital para difundir as suas valências e atividades, entendemos justificar-­se fazer uma revisão da literatura onde: procuraremos compreender a importância do turismo na sociedade atual assim como, o impacto das novas tecnologias da informação em atividades relacionadas com o turismo e ainda, procuraremos perceber quais os canais de comunicação digital que estão ao dispor dos profissionais de turismo, nomeadamente os gestores de unidades hoteleiras, para promover os seus serviços. O objetivo principal deste trabalho consiste em mostrar como foi desenvolvido uma estratégia de comunicação digital para promover online uma unidade hoteleira low cost, no caso presente o Oporto Invictus Hostel. Trata­‐se de um projeto integrado em que não só se criaram as diferentes peças de comunicação como se definiu e aplicou uma estratégia promocional com vista à divulgação do Hostel. O projeto apresentado evidencia como é possível, com recursos limitados, criar um sistema integrado de comunicação digital online que promova uma pequena unidade hoteleira, de forma a dar-­‐lhe visibilidade tanto a nível nacional como internacional. O projeto está dividido em cinco partes. Numa primeira parte é feita a apresentação do briefing que resultou de uma primeira reunião com o cliente. Numa segunda parte apresenta­‐se a fase de planeamento relativa ao desenvolvimento do projeto. Numa terceira parte descreve-­se o processo de implementação do projeto. Na quarta fase abordam-se os testes funcionais e na quinta e última fase faz-­se referencia a aspetos relacionados com a conclusão do projeto.

A Distributed System for the Dissemination of DGPS Data through the Internet

In this paper we describe a low cost distributed system intended to increase the positioning accuracy of outdoor navigation systems based on the Global Positioning System (GPS). Since the accuracy of absolute GPS positioning is insufficient for many outdoor navigation tasks, another GPS based methodology – the Differential GPS (DGPS) – was developed in the nineties. The differential or relative positioning approach is based on the calculation and dissemination of the range errors of the received GPS satellites. GPS/DGPS receivers correlate the broadcasted GPS data with the DGPS corrections, granting users increased accuracy. DGPS data can be disseminated using terrestrial radio beacons, satellites and, more recently, the Internet. Our goal is to provide mobile platforms within our campus with DGPS data for precise outdoor navigation. To achieve this objective, we designed and implemented a three-tier client/server distributed system that, first, establishes Internet links with remote DGPS sources and, then, performs campus-wide dissemination of the obtained data. The Internet links are established between data servers connected to remote DGPS sources and the client, which is the data input module of the campus-wide DGPS data provider. The campus DGPS data provider allows the establishment of both Intranet and wireless links within the campus. This distributed system is expected to provide adequate support for accurate outdoor navigation tasks.

Printed nonuniform antenna array for WI-FI sectorized communications

Wireless networks have joined to the sports venues, offering to the public a set of facilities, such as the access to email, news, and also to use the social networking, uploading their photos. New challenges have emerged to provide Wi-Fi in this densely populated stadiums, such as increasing capacity and coverage. In this article, an access point antenna array to cover a sector of a stadium is presented. Its structure, designed in a low cost material allows to reduce the total manufacturing costs, an important factor due to the large number of antennas required in these venues. The material characteristic, the broad bandwidth of operation (300 MHz), along with to the low side lobe levels, important to reduce interference between sectors, makes this antenna well-positioned for wireless communications in these particular locals. (c) 2015 Wiley Periodicals, Inc. Microwave Opt Technol Lett 57:2037-2041, 2015.

RFID-based wireless passive sensors utilizing cork materials

This paper presents the design of low-cost, conformal UHF antennas and RFID tags on two types of cork substrates: 1) natural cork and 2) agglomerate cork. Such RFID tags find an application in wine bottle and barrel identification, and in addition, they are suitable for numerous antenna-based sensing applications. This paper includes the high-frequency characterization of the selected cork substrates considering the anisotropic behavior of such materials. In addition, the variation of their permittivity values as a function of the humidity is also verified. As a proof-of-concept demonstration, three conformal RFID tags have been implemented on cork, and their performance has been evaluated using both a commercial Alien ALR8800 reader and an in-house measurement setup. The reading of all tags has been checked, and a satisfactory performance has been verified, with reading ranges spanning from 0.3 to 6 m. In addition, this paper discusses how inkjet printing can be applied to cork surfaces, and an RFID tag printed on cork is used as a humidity sensor. Its performance is tested under different humidity conditions, and a good range in excess of 3 m has been achieved, allied to a good sensitivity obtained with a shift of >5 dB in threshold power of the tag for different humid conditions.

Standardization of dot-ELISA for the serological diagnosis of toxocariasis and comparision of the assay with ELISA

The dot-enzyme-linked immunosorbent assay (dot-ELISA) was standardized using somatic (S) and excretory-secretory (ES) antigens of Toxocara-canis for the detection of specific antibodies in 22 serum samples from children aged 1 to 15 years, with clinical signs of toxocariasis. Fourteen serum samples from apparently normal individuals and 28 sera from patients with other pathologies were used as controls. All samples were used before and after absorption with Ascaris suum extract. When the results were evaluated in comparison with ELISA, the two tests were found to have similar sensitivity, but dot-ELISA was found to be more specific in the presence of the two antigens studied. Dot-ELISA proved to be effective for the diagnosis of human toxocariasis, presenting advantages in terms of yield, stability, time and ease of execution and low cost.

Plano de negócios: UpBiz

Trabalho de projeto apresentado à Escola Superior de Comunicação Social como parte dos requisitos para obtenção de grau de mestre em Publicidade e Marketing.

Using dynamic reconfiguration to reduce the area of a JPEG decoder on FPGA

Partial dynamic reconfiguration of FPGAs can be used to implement complex applications using the concept of virtual hardware. In this work we have used partial dynamic reconfiguration to implement a JPEG decoder with reduced area. The image decoding process was adapted to be implemented on the FPGA fabric using this technique. The architecture was tested in a low cost ZYNQ-7020 FPGA that supports dynamic reconfiguration. The results show that the proposed solution needs only 40% of the resources utilized by a static implementation. The performance of the dynamic solution is about 9X slower than the static solution by trading-off internal resources of the FPGA. A throughput of 7 images per second is achievable with the proposed partial dynamic reconfiguration solution.

Energy evaporation: the new concept of indoor systems for WPT and EH embedded into the floor

This work introduces a novel idea for wireless energy transfer, proposing for the first time the unit-cell of an indoor localization and RF harvesting system embedded into the floor. The unit-cell is composed by a 5.8 GHz patch antenna surrounded by a 13.56 MHz coil. The coil locates a device and activate the patch which, connected to a power grid, radiates to wirelessly charge the localized device. The HF and RF circuits co-existence and functionality are demonstrated in this paper, the novelty of which is also in the adoption of low cost and most of all ecofriendly materials, such as wood and cork, as substrates for electronics.

Non-uniform printed antenna array for wireless communications in sports arenas

Wireless communications had a great development in the last years and nowadays they are present everywhere, public and private, being increasingly used for different applications. Their application in the business of sports events as a means to improve the experience of the fans at the games is becoming essential, such as sharing messages and multimedia material on social networks. In the stadiums, given the high density of people, the wireless networks require very large data capacity. Hence radio coverage employing many small sized sectors is unavoidable. In this paper, an antenna is designed to operate in the Wi-Fi 5GHz frequency band, with a directive radiation pattern suitable to this kind of applications. Furthermore, despite the large bandwidth and low losses, this antenna has been developed using low cost, off-the-shelf materials without sacrificing quality or performance, essential to mass production. © 2015 EurAAP.

Fabrication of electrochemically reduced graphene oxide/cobalt oxide composite for charge storage electrodes

Electrochemically-reduced graphene oxide (Er-GO) and cobalt oxides (CoOx) were co-electrodeposited by cyclic voltammetry, from an electrolyte containing graphene oxide and cobalt nitrate, directly onto a stainless steel substrate to produce composite electrodes presenting high charge storage capacity. The electrochemical response of the composite films was optimized by studying the parameters applied during the electrodeposition process, namely the number of cycles, scan rate and ratio between GO/Co(NO3)(2) concentrations in the electrolyte. It is shown that, if the appropriate conditions are selected, it is possible to produced binder-free composite electrodes with improved electrochemical properties using a low-cost, facile and scalable technique. The optimized Er-GO/CoOx developed in this work exhibits a specific capacitance of 608 F g(-1) at a current density of 1 A g(-1) and increased reversibility when compared to single CoOx. (C) 2015 Elsevier B.V. All rights reserved.

Modelação do comportamento dinâmico de sistemas barragem-fundação-albufeira: análise sísmica de uma barragem de abóbadas múltiplas

Trabalho Final de Mestrado elaborado no Laboratório Nacional de Engenharia Civil (LNEC) para a obtenção do grau de Mestre em Engenharia Civil pelo Instituto Superior de Engenharia de Lisboa no âmbito do protocolo de cooperação entre o ISEL e o LNEC

Person Localization Using Sensor Information Fusion

Nowadays the incredible grow of mobile devices market led to the need for location-aware applications. However, sometimes person location is difficult to obtain, since most of these devices only have a GPS (Global Positioning System) chip to retrieve location. In order to suppress this limitation and to provide location everywhere (even where a structured environment doesn’t exist) a wearable inertial navigation system is proposed, which is a convenient way to track people in situations where other localization systems fail. The system combines pedestrian dead reckoning with GPS, using widely available, low-cost and low-power hardware components. The system innovation is the information fusion and the use of probabilistic methods to learn persons gait behavior to correct, in real-time, the drift errors given by the sensors.

Localization system for pedestrians based on sensor and information fusion

Nowadays there is an increase of location-aware mobile applications. However, these applications only retrieve location with a mobile device's GPS chip. This means that in indoor or in more dense environments these applications don't work properly. To provide location information everywhere a pedestrian Inertial Navigation System (INS) is typically used, but these systems can have a large estimation error since, in order to turn the system wearable, they use low-cost and low-power sensors. In this work a pedestrian INS is proposed, where force sensors were included to combine with the accelerometer data in order to have a better detection of the stance phase of the human gait cycle, which leads to improvements in location estimation. Besides sensor fusion an information fusion architecture is proposed, based on the information from GPS and several inertial units placed on the pedestrian body, that will be used to learn the pedestrian gait behavior to correct, in real-time, the inertial sensors errors, thus improving location estimation.