933 resultados para Longevity.


Relevância:

10.00% 10.00%

Publicador:

Resumo:

Objectives:Microleakage is a pre-stage of debonding between hard chairside relines and denture base acrylic resins. Therefore, it is important to assess them with regard to the longevity of the relined denture. This study investigated the effect of thermal cycling on the microleakage at the interface of three hard chairside reline resins and three denture base resins.Material and methods:Rectangular bars (12 mm x 3 mm x 3 mm) of Lucitone 550, Acron MC and QC 20 were made and relined with Kooliner, Tokuyama Rebase Fast II and Ufi Gel Hard, Lucitone 550, Acron MC and QC 20 resins. Specimens were divided into one control and two test groups (n = 10). In specimens of the control group, the microleakage was performed after the reline procedure. In Test Group 1, the specimens were stored for 24 h in distilled water at room temperature and in Test Group 2; the specimens were thermal cycled from 5 to 55 degrees C for 5000 cycles with a 30-s dwell time. Subsequently, all specimens were immersed in 50% silver nitrate solutions for 24 h. All specimens were sectioned longitudinally into three fractions and the lateral sections were examined (n = 20). Silver nitrate stain penetration was examined under a stereoscopic lens with x30 magnification, and the images were captured. Leica Qwin image analysis software was used to determine microleakage at the interface of the materials. Data were analysed using the Kruskal-Wallis test at a 95% level of significance.Results:For all cycles, there were no statistically significant differences between thermal cycled and non-thermal cycled groups (p > 0.05).Conclusion:It can be concluded that thermal cycling had no effect on the microleakage.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Statement of problem. Although titanium presents attractive physical and mechanical properties, there is a need for improving the bond at the titanium/luting cement interface for the longevity of metal ceramic restorations.Purpose. The purpose of this study was to evaluate the effect of surface treatments on the shear bond strength (SBS) of resin-modified glass ionomer and resin cements to commercially pure titanium (CP Ti).Material and methods. Two hundred and forty CP Ti cast disks (9.0 x 3.0 mm) were divided into 8 surface treatment groups (n=30): 1) 50 mu m Al2O3 particles; 2) 120 mu m Al2O3 particles; 3) 250 mu m Al2O3 particles; 4) 50 mu m Al2O3 particles + silane (RelyX Ceramic Primer); 5) 120 mu m Al2O3 particles + silane; 6) 250 mu m Al2O3 particles + silane; 7) 30 mu m silica-modified Al2O3 particles (Cojet Sand) + silane; and 8) 120 mu m Al2O3 particles, followed by 110 mu m silica-modified Al2O3 particles (Rocatec). The luting cements 1) RelyX Luting 2; 2) RelyX ARC; or 3) RelyX U100 were applied to the treated CP Ti surfaces (n=10). Shear bond strength (SBS) was tested after thermal cycling (5000 cycles, 5 degrees C to 55 degrees C). Data were analyzed by 2-way analysis of variance (ANOVA) and the Tukey HSD post hoc test (alpha=.05). Failure mode was determined with a stereomicroscope (x20).Results. The surface treatments, cements, and their interaction significantly affected the SBS (P<.001). RelyX Luting 2 and RelyX U100 exhibited similar behavior for all surface treatments. For both cements, only the group abraded with 50 mu m Al2O3 particles had lower SBS than the other groups (P<.05). For RelyX ARC, regardless of silane application, abrasion with 50 mu m Al2O3 particles resulted in significantly lower SBS than abrasion with 120 mu m and 250 mu m particles, which exhibited statistically similar SBS values to each other. Rocatec + silane promoted the highest SBS for RelyX ARC. RelyX U100 presented the highest SBS mean values (P<.001). All groups showed a predominance of adhesive failure mode.Conclusions. The adhesive capability of RelyX Luting 2 and RelyX U100 on the SBS was decisive, while for RelyX ARC, mechanical and chemical factors were more influential. (J Prosthet Dent 2012;108:370-376)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Caesalpinia echinata and C ferrea var. ferrea have different seed behaviours and seed and fruit types. Comparison of the seed ontogeny and anatomy partly explained the differences in seed behaviour between these two species of Brazilian legumes; some differences were also related to fruit development. The seed coat in C. ferrea consisted of two layers of osteosclereids, as well as macrosclereids and fibres, to form a typical legume seed coat, whereas C. echinata had only macrosclereids and fibres. In C. echinata, the developing seed coat had paracytic stomata, a feature rarely found in legume seeds. These seed coat features may account for the low longevity of C. echinata seeds. The embryogeny was similar in both species, with no differences in the relationship between embryo growth and seed growth. The seeds of both species behaved as typical endospermic seeds, despite their different morphological classification (exendospermic orthodox seeds were described for C. echinata and endospermic orthodox seeds for C. ferrea). Embryo growth in C. ferrea accelerated when the sclerenchyma of the pericarp was developing, whereas embryonic growth in C. echinata was associated with the conclusion of spine and secretory reservoir development in the pericarp. Other features observed included an endothelial layer that secreted mucilage in both species, a nucellar summit, which grew up into the micropyle, and a placental obturator that connected the ovarian tissue to the ovule in C. ferrea. (C) 2004 the Linnean Society of London.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Cordyline terminalis is a tropical ornamental with high decorative value due its variety of colors and foliar patterns. This ornamental is new in the Brazilian market and has large potential to be exported. The lack of studies on postharvest aspects is a problem for new crops, and the development of good post-production techniques can reduce costs due to loss of unsalable, damaged plants. The present work aimed to characterize the vase life of red and green cultivars of C. terminalis. Conservation techniques, such as pulsing with gibberellic acid (GA(3)), wax spray, and cold storage for 10 and 20 days at 5, 10, and 13 degrees C were tested. Also, macro-and micronutrients concentration was tracked during the senescence process. In the water-based treatment (control), both cultivars had a vase life of 21 days. Vase life was not influenced by wax spray, GA pulsing, or cold storage for 10 days at 5, 10 or 13 degrees C. In both cultivars, the postharvest techniques used did not improve the vase life on this species. on the other hand, by cold storing the foliage for 20 days in any of the tested temperatures, the vase life was shortened one week, with a total of 14 days longevity compared with all other treatments. Color changes were not correlated with senescence of the foliage. Nutrients did not change during the evaluation period. C. terminalis had a vase life long enough for export, supported by cold storage up to 10 days, which did not shorten the vase life.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Replicative life span in Saccharomyces cerevisiae is increased by glucose (G1c) limitation [ calorie restriction (CR)] and by augmented NAD(+). Increased survival promoted by CR was attributed previously to the NAD(+)-dependent histone deacetylase activity of sirtuin family protein Sir2p but not to changes in redox state. Here we show that strains defective in NAD(+) synthesis and salvage pathways (pnc1 Delta, npt1 Delta, and bna6 Delta) exhibit decreased oxygen consumption and increased mitochondrial H2O2 release, reversed over time by CR. These null mutant strains also present decreased chronological longevity in a manner rescued by CR. Furthermore, we observed that changes in mitochondrial H2O2 release alter cellular redox state, as attested by measurements of total, oxidized, and reduced glutathione. Surprisingly, our results indicate that matrix-soluble dihydrolipoyl-dehydrogenases are an important source of CR-preventable mitochondrial reactive oxygen species (ROS). Indeed, deletion of the LPD1 gene prevented oxidative stress in npt1 Delta and bna6 Delta mutants. Furthermore, pyruvate and alpha-ketoglutarate, substrates for dihydrolipoyl dehydrogenase-containing enzymes, promoted pronounced reactive oxygen release in permeabilized wild-type mitochondria. Altogether, these results substantiate the concept that mitochondrial ROS can be limited by caloric restriction and play an important role in S. cerevisiae senescence. Furthermore, these findings uncover dihydrolipoyl dehydrogenase as an important and novel source of ROS leading to life span limitation.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Increased replicative longevity in Saccharomyces cerevisiae because of calorie restriction has been linked to enhanced mitochondrial respiratory activity. Here we have further investigated how mitochondrial respiration affects yeast life span. We found that calorie restriction by growth in low glucose increased respiration but decreased mitochondrial reactive oxygen species production relative to oxygen consumption. Calorie restriction also enhanced chronological life span. The beneficial effects of calorie restriction on mitochondrial respiration, reactive oxygen species release, and replicative and chronological life span could be mimicked by uncoupling agents such as dinitrophenol. Conversely, chronological life span decreased in cells treated with antimycin (which strongly increases mitochondrial reactive oxygen species generation) or in yeast mutants null for mitochondrial superoxide dismutase (which removes superoxide radicals) and for RTG2 (which participates in retrograde feedback signaling between mitochondria and the nucleus). These results suggest that yeast aging is linked to changes in mitochondrial metabolism and oxidative stress and that mild mitochondrial uncoupling can increase both chronological and replicative life span.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Dietary carbohydrates provide an important source of energy for flight, and contribute to longevity and fecundity of mosquitoes. The most common sugar mosquitoes ingest is sucrose, and digestion of this substance is carried out mainly by alpha-glucosidases. In the current work, we tested the efficiency of sucrose on Anopheles aquasalis female diet. The best longevity (days) was reached when sugar was available in the diet, whereas most only blood fed females were dead 6 days after emergence. Three alpha-glucosidase isoforms were detected in the adult female midgut, named alpha Glu1, alpha Glu2 and alpha Glu3. These are acidic alpha-glucosidases with optima pH around pH 5.5. alpha Glu1 and alpha Glu2 are present in both secreted and membrane-bound forms, whereas alpha Glu3 only in anchored to membranes. The alpha-glucosidase activity is concentrated mainly in the posterior midgut (70%), both in non-fed or 10% sucrose fed females. The single form of these a-glucosidases seemed to be similar to 70 kDa polypeptides, although alpha Glu2 is presented in >= 600 kDa self-aggregates. K, values of alpha Glu1, alpha Glu2 and alpha Glu3 differed significantly from each other, supporting the statement that three alpha-glucosidases are produced in the female midgut. Together, all data suggest that sugar is an essential component of A. aquasalis female diet. In addition, alpha-glucosidases are synthesized in the same place where sucrose is digested and absorbed, the midgut. (c) 2007 Elsevier B.V. All rights reserved.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The lady beetle Coleomegilla maculata (De Geer) is a natural enemy of several insect pests and feeds on pollen and nectar to survive periods when prey is scarce. The effect of the feeding interval on the development, survival, fecundity, and longevity of C. maculata was determined. Newly hatched larvae of C. maculata were reared individually and fed with eggs of the Mediterranean flour moth Anagasta kuehniella (Zeller) at intervals of one, two, and three days under controlled conditions (23 ± 1ºC; 60 ± 10% RH; 12 h phtophase). The duration of larval instars and the total larval stage was prolonged as the feeding interval increased. The larval period lasted on average 9.2 ± 0.19 days when the larvae were fed daily with prey, and 14.6 ± 0.48 days when food was offered at three-day intervals. There was an inverse relationship between food intervals, survival, and weight of larvae and adults of the coccinellid. Survival rate of larvae fed daily was 76.8%, while the rate was 50.0% and 23.4% for larvae fed every two and three days, respectively. Coleomegilla maculata showed fecundity of 781.1 ± 149.02, 563.4 ± 80.81 and 109.0 ± 103.0 eggs when fed daily and at intervals of two and three days, respectively.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Fêmeas de Cotesia flavipes (Cam.) foram introduzidas, individualmente, em placas de Petri contendo uma larva de seu hospedeiro Diatraea saccharalis (Fabr.). Permitiu-se que cada fêmea de C. flavipes realizasse posturas uma ou duas vezes em uma mesma larva. O período de emergência das larvas e dos adultos, a razão sexual, o número de larvas e pupas inviáveis e a longevidade dos adultos de C. flavipes registrados nas duas condições experimentais (uma ou duas posturas) foram comparados. Os resultados revelaram que duas oviposições sucessivas no hospedeiro não alteraram a razão sexual na descendência, mas aumentaram o número de parasitóides e também o número de larvas e pupas inviáveis.