Effect Of Mo Doping On The Electrical Properties Of VO2 Phase

Solution combustion synthesis technique was adopted to synthesize V2O5, and Mo doped phases, The as-synthesized V2O5, has been reduced by a novel reduction technique to form VO2 typephase. The monophasic nature of the samples as revealed by XRD data and systematic shift in peak position indicated solid solubility up to 2 at % of Mo in VO2 lattice. The crystallite size was found to similar to 40 nm. Particle size measurement carried out using Transmission electron microscope ( TEM) agreed with XRD experiments. Scanning electron microscope revealed the morphology of the particles to be plate like and bimodal. Variation in the metal- insulator transition temperature as a function of doping was investigated by 4-probe electrical resistivity measurement on sintered ceramics.

Diffusion pattern in MSi2 and M5Si3 silicides in group VB (M = V, Nb, Ta) and VIB (M = Mo, W) refractory metal-silicon systems

Group VB and VIB M-Si systems are considered to show an interesting pattern in the diffusion of components with the change in atomic number in a particular group (M = V, Nb, Ta or M = Mo, W, respectively). Mainly two phases, MSi2 and M5Si3 are considered for this discussion. Except for Ta-silicides, the activation energy for the integrated diffusion of MSi2 is always lower than M5Si3. In both phases, the relative mobilities measured by the ratio of the tracer diffusion coefficients, , decrease with an increasing atomic number in the given group. If determined at the same homologous temperature, the interdiffusion coefficients increase with the atomic number of the refractory metal in the MSi2 phases and decrease in the M5Si3 ones. This behaviour features the basic changes in the defect concentrations on different sublattices with a change in the atomic number of the refractory components.

Synergistic Effect of Mo plus Cu Codoping on the Photocatalytic Behavior of Metastable TiO2 Solid Solutions

Codoping with Cu and Mo is shown to have a synergistic effect on the photocatalytic activity of TiO2. The enhancement in activity is observed only if the synthesis route results in TiO2 in which (Cu, Mo) codopants are forced into the TiO2 lattice. Using X-ray photoelectron spectroscopy, Cu and Mo are shown to be present in the +2 and +6 oxidation states, respectively. A systematic study of the ternary system shows that TiO2 containing 6 mol % CuO and 1.5 mol % MoO3 is the most active ternary composition. Ab initio calculations show that codoping of TiO2 using (Mo, Cu) introduces levels above the valence band, and below the conduction band, resulting in a significant reduction in the band gap (similar to 0.8 eV). However, codoping also introduces deep defect states, which can have a deleterious impact on photoactivity. This helps rationalize the narrow compositional window over which the enhancement in photocatalytic activity is observed.

A new tungsten-free gamma-gamma ` Co-Al-Mo-Nb-based superalloy

We present the first report of a tungsten-free cobalt-based superalloy having a composition Co-10Al-5Mo-2Nb. The alloy is strengthened by cuboidal precipitates of metastable Co-3(Al,Mo,Nb) distributed throughout the microstructure. The precipitates are coherent with the face-centred cubic gamma-Co matrix and possess ordered Ll(2) structure. The microstructure is identical to the popular gamma-gamma' type nickel-based superalloys and that of recently reported Co-Al-W-based alloys. Being tungsten free, the reported alloy has higher specific proof stress compared to existing cobalt-based superalloys. (C) 2014 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Biodiesel Exhaust Treatment with Dielectric Barrier Discharges Coupled with Industrial Waste Byproducts

Biodiesel run engines are gaining popularity since the last few years as a viable alternative to conventional petro-diesel based engines. In biodiesel exhaust the content of volatile organic compounds, oil mist, and mass of particulate matter is considerably lower. However, the concentration of oxides of nitrogen (NOx) is relatively higher. In this paper the biodiesel exhaust from a stationary engine is treated under controlled laboratory conditions for removal of NOx using dielectric barrier discharge plasma in cascade with adsorbents prepared from abundantly available industrial waste byproducts like red mud and copper slag. Results were compared with gamma-alumina, a commercial adsorbent. Two different dielectric barrier discharge (DBD) reactors were tested for their effectiveness under Repetitive pulses /AC energization. NOx removal as high as 80% was achieved with pulse energized reactors when cascaded with red mud as adsorbent.

A new class of high strength high temperature Cobalt based gamma-gamma ` Co-Mo-Al alloys stabilized with Ta addition

The present paper reports a new class of Co based superalloys that has gamma-gamma' microstructure and exhibits much lower density compared to other commercially available Co superalloys including Co-Al-W based alloys. The basic composition is Co-10Al-5Mo (at%) with addition of 2 at% Ta for stabilization of gamma' phase. The gamma-gamma' microstructure evolves through solutionising and aging treatment. Using first principles calculations, we observe that Ta plays a crucial role in stabilizing gamma' phase. By addition of Ta in the basic stoichiometric composition Co-3(Al, Mo), the enthalpy of formation (Delta H-f) of L1(2) structure (gamma' phase) becomes more negative in comparison to DO19 structure. The All of the L12 structure becomes further more negative by the occupancy of Ni and Ti atoms in the lattice suggesting an increase in the stability of the gamma' precipitates. Among large number of alloys studied experimentally, the paper presents results of detailed investigations on Co-10Al-5Mo-2Ta, Co-30Ni-10Al-5Mo-2Ta and Co-30Ni-10Al-5Mo-2Ta-2Ti. To evaluate the role alloying elements, atom probe tomography investigations were carried out to obtain partition coefficients for the constituent elements. The results show strong partitioning of Ni, Al, Ta and Ti in ordered gamma' precipitates. 2015 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Spectrophotometric determination of molybdenum with Syzygium jambolanum DC leaf extracts

A new spectrophotometric method for the determination of molybdenum in industrial materials has been developed using the leaf extract of Syzygium jambolanum DC based on the reaction of Mo (VI) at pH 7.0 to produce an orange-yellow complex with an absorption maximum at 426 nm. The molar absorptivity of the complex is 4.27 x 10(4) l mol(-1) cm(-1) and the absorbance, is linear in the range 0.05-0.8 ppm. Sandell sensitivity coefficient was found to be 2.25 x 10(-3) mu g/cm(2). The method is ten times more sensitive than the aqueous thiocyanate system. It has been applied successfully in micronutrient fertilizer, artificial freshwater and sea-water analyses.

Conversion of plastic waste into CNTs using Ni/Mo/MgO catalystAn optimization approach by mixture experiment

A combustion technique is used to study the synthesis of carbon nano tubes from waste plastic as a precursor and Ni/Mo/MgO as a catalyst. The catalytic activity of three components Ni, Mo, MgO is measured in terms of amount of carbon product obtained. Different proportions of metal ions are optimized using mixture experiment in Design expert software. D-optimal design technique is adopted due to nonsimplex region and presence of constraints in the mixture experiment. The activity of the components is observed to be interdependent and the component Ni is found to be more effective. The catalyst containing Ni0.8Mo0.1MgO0.1 yields more carbon product. The structure of catalyst and CNTs are studied by using SEM, XRD, and Raman spectroscopy. SEM analysis shows the formation of longer CNTs with average diameter of 40-50 nm.

A nano-scale instability in the beta phase of dilute Ti-Mo alloys

A nano-scale instability in the beta phase resulting in the formation of the disordered orthorhombic O' phase has been discovered in a fairly dilute binary Ti-Mo alloy, using selected area electron diffraction and high resolution scanning transmission electron microscopy. The O' phase informed in the alloy when the Mo content exceeds a critical value. The instability occurs in beta-solutionized samples that have been quenched to room temperature and is found to co-exist with athermal omega to phase. Interestingly, this nano-scale instability, involving the {110}<1<(1)over bar>0> soft-phonon shuffle, occurs in the beta phase without deliberate additions of either interstitial or substitutional solutes. (C) 2016 Elsevier Ltd. All rights reserved.

Effect of temperature on dislocation emission from crack tip for BCC metal Mo

The effect of thermally activated energy on the dislocation emission from a crack tip in BCC metal Mo is simulated in this paper. Based on the correlative reference model on which the flexible displacement boundary scheme is introduced naturally, the simulation shows that as temperature increases the critical stress intensity factor for the first dislocation emission will decrease and the total number of emitted dislocations increase for the same external load. The dislocation velocity and extensive distance among partial dislocations are not sensitive to temperature. After a dislocation emission, two different deformation slates are observed, the stable and unstable deformation states. In the stable deformation slate, the nucleated dislocation will emit from the crack tip and piles up at a distance far away from the crack tip, after that the new dislocation can not be nucleated unless the external loading increases. In the unstable deformation state, a number of dislocations can be emitted from the crack lip continuously under the same external load.

Incidencia de Cysticercus bovis en la matanza industrial de Nicaragua

En este trabajo, se analizó la situación existente con respecto a la Cysticercosis bovina, en la Empresa Julio Moneada Tercero, ubicada en el Km 11 carretera Norte, departamento de Managua; Esta Empresa cubre el 33% de la matanza industrial en Nicaragua. Con los datos recabados se Evaluaron: Niveles de infestación de los años 1984, 1985, 1988 y 1989; se determinó la infestación por categorías; EL departamento de mayor incidencia; Y las pérdidas económicas. Para el análisis estadístico, el método utilizado fue el de mínimos cuadrados generalizado, usando el procedimiento CATMOD del paquete statistical Analisis System. Los resultados obtenidos en el Análisis de varianza, demuestran que existen diferencias significativas entre años, con un nivel de significancia de P< 0.05 obteniéndose 1.24% de infestación global para los cuatro años, así como también existen diferencias significativas para las diferentes categorías (P< 0.05), siendo la categoría vaca (C2) la más afectada. Matagalpa resultó ser el departamento con el mayor número de animales parasitados seguido de Boaco, Managua y León. Las pérdidas económicas revelan cifras aproximadas de US$ 109,121.50 (ciento nueve mil ciento veinte y un dólares con cincuenta centavos) para el productor, adicionando a esto, las divisas no captadas por un monto aproximado de US$ 653,511.07 (seiscientos cincuenta y tres mil quinientos once dólares con siete centavos) por disminución de las exportaciones.

Residuos de plaguicidas en carne bovina de exportación en el Matadero Industrial Amerrisque

El presente trabajo se realizó en el matadero Amerrisque ubicado a la altura del km 128 carretera el Rama a 130 metros sobre e1 nivel del mar con el objetivo de evaluar los residuos de plaguicidas en carne bovina de exportación. Los datos fueron recopilados de la matanza diaria realizada en dicho matadero a partir del mes de enero de 1987 al mes de diciembre de 1992 a excepción de los meses de marzo, abril, agosto y noviembre del año 1989, de igual forma el año 1990, debido a que los registros ya para este año se encontraron incompletos. Las variables en estudio fueron: Niveles de contaminación aceptable y no aceptable para la exportación, procedencia de dichas carnes, plaguicidas que mayormente se acumulan en 1a carne y las pérdidas económicas. El procedimiento analítico se realizó por medio de una distribución de frecuencias, se hizo uso de medias como estadística descriptiva y también se determinó el rango. Como resultado del presente estudio observamos que la matanza industrial efectuada para los cinco años en estudio fue de 142,919 cabezas, de éstas 18,434 resultaron contaminada con un promedio de contaminación de 0.059 partes por millón, dejándose de percibir USA $ 10,497 dólares.

Efecto de tres periodos de suministro de alimento de retiro en broilers en la Empresa Tip-Top industrial, S.A.

En el presente estudio se evaluaron tres periodos de alimento de retiro o acabado en broilers (o, 3, 6 y 9 días antes de la matanza) el cual contiene 3,225 kcal EM/kg de alimento y 19% de proteína, ajustándose a los requerimientos nutricionales recomendados por Arbor Acres Farm Inc., (1992), en especial a la proporción energia-proteina. La evaluación tuvo lugar en la Granja Buenos Aires propiedad de la Empresa Tip-Top Industrial, S.A., con una duración de 42 días, en donde se utilizaron 800 pollos de engorde sin sexar (mixtos) de la línea Peterson-Arbor Acres de un día de edad, dichos pollos fueron distribuidos aleatoriamente en cuatro tratamientos: T1 suministro de alimento de retiro por nueve días), T2 suministro de alimento de retiro por seis días), T3, (Suministro de alimento de retiro por tres días) y T4 (testigo, con cero días de alimento de retiro), con cuatro repeticiones cada uno, distribuidos en un Diseño completamente al Azar sometidos a la prueba de rangos múltiples de Duncan. Las variables estudiadas fueron: consumo de alimento, peso vivo, ganancia de peso, conversión alimenticia, mortalidad vs viabilidad, rendimiento en la canal, análisis económico. No se encontraron diferencias significativas (P<0.05) entre los tratamientos al final del ensayo para el consumo de alimento, conversión alimenticia y costo de alimento, pero no así ara peso vivo y ganancia de peso. El porcentaje de mortalidad acumulada total fue de 2.5% y los rendimientos de la canal fueron: (90.74)T1 (88.98)T2, (85.86)T3,y (90.31)T4, Se corolo que el periodo de suministro de alimento de retiro que permitió los mejores pesos vivos, ganancias de pesos y conversiones alimenticias fue el periodo de tres días (T3), sin embargo, obtuvo el mayor consumo total para generar un peso promedio en la canal de 3.34 lbs, además, presentó el mayor costo alimenticio entre los tratamientos experimentales (T1, T2, T3) y bajo rendimiento en la canal, contrario al T1 que aunque los parámetros productivos fueron menores que el T3 obtuvo el mayor rendimiento en la canal con un menor costo alimenticio. El alimento de retiro no ejerció efecto sobre las variables estudiadas lo que demuestra que dicho alimento pueda ser una alternativa viable para disminuir costo alimenticio.

Determinación de presencia de residuos de antibióticos en carnes bovinas en el matadero industrial Nuevo Carnic, Managua

Los antibióticos imputan grandes beneficios por la eficacia antibacteriana que poseen para combatir las enfermedades que afectan a los vacunos, no obstante el uso irracional sin respetar las dosis recomendadas del producto indiscriminadamente puede tener graves consecuencias, como la resistencia bacteriana al producto que conlleva a una sobre dosificación. Tomando en cuenta la exigencia de los mercados Internacionales que cada día demandan de los productores y exportadores productos con mayor calidad de la carne en lo relacionado a los residuos de antibióticos se desarrolló el presente trabajo investigativo que se titula “Residuos de Antibióticos en carnes bovinas en el matadero Industrial Nuevo Carnic. Managua.” En el matadero se seleccionaron muestras al azar una vez por mes para determinación de residuos de antibióticos en la canal para ser realizadas en el laboratorio mediante la técnica LAST-FSIS. Mediante las cuales permitieron reconocer la ausencia de residuos de antibióticos en las canales de los años muestreados, así como también determinar la ausencia de residuos por procedencia, ya sea de departamentos o municipios de Nicaragua, que llevan animales a este matadero alcanzándose a determinar el porcentaje de animales analizándose por productores. Es saludable reconocer que a pesar de la limitada asistencia médica que reciben los productores y el alto número de productos químicos ofrecidos por las casas comerciales las canales encuentran libres de residuos de antibióticos.

Dislocations emission and crack extension at the atomistic crack tip in body-centered-cubic metal Mo

The behaviors of a crack in body-centered-cubic metal Mo under different loading modes were studied using the molecular dynamics method. Dislocation emission was observed near the crack tip in response to mode II loading with theta = 0 degrees in which theta is the inclination angle of the slip plane with respect to the crack plane, and two full dislocations were observed at the stress level of K-II = 1.17 MPa m(1/2) without any evidence of crack extension. Within the range of 0 degrees less than or equal to theta less than or equal to 45 degrees, crack extension was observed in response to mode I loading, and the effect of crystal orientation on the crack propagation was studied, The crack propagated along the [111] slip direction without any evidence of dislocations emission.