Síntese hidrotérmica e caracterização estrutural de titanatos nanotubulares para aplicação na captura do dióxido de carbono

Nanostructured materials have been spreading successfully over past years due its size and unusual properties, resulting in an exponential growth of research activities devoted to nanoscience and nanotechnology, which has stimulated the search for different methods to control main properties of nanomaterials and make them suitable for applications with high added value. In the late 90 s an alternative and low cost method was proposed from alkaline hydrothermal synthesis of nanotubes. Based on this context, the objective of this work was to prepare different materials based on TiO2 anatase using hydrothermal synthesis method proposed by Kasuga and submit them to an acid wash treatment, in order to check the structural behavior of final samples. They were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), adsorption/desorption of N2, thermal analysis (TG/DTA) and various spectroscopic methods such as absorption spectroscopy in the infrared (FT-IR), Raman spectroscopy and X-ray photoelectron spectroscopy (XPS). All the information of characterizations confirmed the complete conversion of anatase TiO2 in nanotubes titanates (TTNT). Observing the influence of acid washing treatment in titanates structure, it was concluded that the nanotubes are formed during heat treatment, the sample which was not subjected to this process also achieved a complete phase transformation, as showed in crystallography and morphology results, however the surface area of them practically doubled after the acid washing. By spectroscopy was performed a discussion about chemical composition of these titanates, obtaining relevant results. Finally, it was observed that the products obtained in this work are potential materials for various applications in adsorption, catalysis and photocatalysis, showing great promise in CO2 capture

Reciclagem química de Polietileno utilizando Sílica Mesoporosa tipo SBA-15 avalizada por Termogravimetriae Espectrometria de Massas

The chemical recycling of polyolefins has been the focus of increasing attention owing potential application as a fuel and as source chemicals. The use of plastic waste contributes to the solution of pollution problems.The use of catalysts can enhance the thermal degradation of synthetic polymers, which may be avaliated by Themogravimetry (TG) and mass spectrometry (MS) combined techniques. This work aims to propose alternatives to the chemistry recycling of low-density polyethylene (LDPE) on mesoporous silica type SBA-15 and AlSBA-15.The mesoporous materials type SBA-15 and AlSBA-15 were synthesized through the hydrothermal method starting from TEOS, pseudobohemite, cloridric acid HCl and water. As structure template was used Pluronic P123. The syntheses were accomplished during the period of three days. The best calcination conditions for removal of the organic template (P123) were optimized by thermal analysis (TG/DTG) and through analyses of Xray diffraction (XRD), infrared spectroscopy (FT-IR), nitrogen adsorption and scanning electron microscopy (SEM) was verified that as much the hydrothermal synthesis method as the calcination by TG were promising for the production of mesoporous materials with high degree of hexagonal ordination. The general analysis of the method of Analog Scan was performed at 10oC/min to 500 oC to avoid deterioration of capillary with very high temperatures. Thus, with the results, we observed signs mass/charge more evident and, using the MID method, was obtained curve of evolution of these signals. The addition of catalysis produced a decrease in temperature of polymer degradation proportional to the acidity of the catalyst. The results showed that the mesoporous materials contributed to the formation of compounds of lower molecular weight and higher value in the process of catalytic degradation of LDPE, representing an alternative to chemical recycling of solid waste

Cloud Integrator: uma plataforma para composição de serviços em ambientes de computação em nuvem

With the advance of the Cloud Computing paradigm, a single service offered by a cloud platform may not be enough to meet all the application requirements. To fulfill such requirements, it may be necessary, instead of a single service, a composition of services that aggregates services provided by different cloud platforms. In order to generate aggregated value for the user, this composition of services provided by several Cloud Computing platforms requires a solution in terms of platforms integration, which encompasses the manipulation of a wide number of noninteroperable APIs and protocols from different platform vendors. In this scenario, this work presents Cloud Integrator, a middleware platform for composing services provided by different Cloud Computing platforms. Besides providing an environment that facilitates the development and execution of applications that use such services, Cloud Integrator works as a mediator by providing mechanisms for building applications through composition and selection of semantic Web services that take into account metadata about the services, such as QoS (Quality of Service), prices, etc. Moreover, the proposed middleware platform provides an adaptation mechanism that can be triggered in case of failure or quality degradation of one or more services used by the running application in order to ensure its quality and availability. In this work, through a case study that consists of an application that use services provided by different cloud platforms, Cloud Integrator is evaluated in terms of the efficiency of the performed service composition, selection and adaptation processes, as well as the potential of using this middleware in heterogeneous computational clouds scenarios

Viabilidade da cultura Cnidoscolus quercifolius POHL para produção de Biodiesel no semiárido nordestino

The northeastern semiarid is a region that presents a serious picture stagnation or slowness of the economic growth, beyond the presence of social pointers below of the averages national and regional. The half-dryness conditions become the improper region for many agricultural cultures, what it affects the local populations directly, as well as the economy that is based mainly on agriculture. Cnidoscolus quercifolius Pohl, popularly know as favelone is a native species of the semiarid region that withholds great potential for the development of the region in virtue of its multiple uses. Being an oleaginous, its production in familiar farmings makes with that biodiesel either for the misery an important alternative eradication for the possibility of occupation of enormous contingents of people. The present study it aims at to evaluate the germination of the faveleira without thorns under conditions of water and saline stresses, main stresses which the vegetal species of the semiarid one are submitted; beyond verifying the acceptance of the species for agriculturists of a cooperative in the city of Apodi/RN. The methodology used for germination corresponds to using treatments with polyethylene glycol and sodium chloride to assess water and salt stress respectively, being held in rolo. O system approach used for the verification of acceptance of faveleira was the use of interview with farmers cooperative in the study area determined. In this direction it was verified that the faveleira is a resistant species the conditions of drought and salinity of the ground, factor of great relevance, since one is about a species with high added value, making possible the development for the semiarid region. It was verified that the agriculturists are favorable the introduction of the faveleira and reveal receptive the idea to cultivate a species with potential for production of biodiesel

Dinâmica populacional do caranguejo-uçá, Ucides cordatus (Linnaeus, 1763) (CRUSTACEA, BRACHYURA, UCIDIDAE) no município de Porto do Mangue, litoral norte do estado do Rio Grande do Norte

Decapod crustaceans are one of the most important portions of megafaunal of coastal waters, playing a role as modifier of the environment and controlling populations of other organisms. Among the Decapoda, crab (brachyuran) constitutes the dominant macrofauna of mangroves. Among brachyuran is the mangrove crab (Ucides cordatus, Linnaeus, 1763), which represents the main component of the macrofauna of mangroves, particularly in Northern and Northeastern Brazil. In Brazil, its distribution is known from the state of Amapá to the north of Santa Catarina. This species is distinguished by its economic importance, being one of the main fishing resources in Brazil, generating a significant impact on their natural populations. This reduction would result in loss of value to the product, preventing its commercialization. Although it´s great ecological and economic importance, there are few articles about the biological aspects of U. cordatus, mainly in the state of Rio Grande do Norte. This work aimed to study the population dynamics of the mangrove crab, Ucides cordatus (Linnaeus, 1763), in Conchas estuary, Porto do Mangue, northern coast of Rio Grande do Norte. During the period November 2009 to October 2010 the crabs were collected monthly, obeying predetermined lunar periods (new moon or full moon) in a mangrove area in Porto do Mangue - RN. With the aid of a steel caliper (0.01 mm) and a precision balance (0.01 g) were measured biometric variables related to the animal's carapace, major propodus chela, width of abdomen (female), length of gonopodium ( males) and total weight. In addition, it was recorded, the gonads and molt stages, for males and females. In total, 476 crabs were collected, with 338 males and 138 females. Males were larger, heavier and in greater proportion than females. The reproductive period for the species in this location was limited during the months November to May, suggesting a change in current environmental legislation for the closure period. Synchrony was observed between the morphological and physiological maturity with females maturing earlier, possibly, a reproductive strategy adopted, compared to the low fishing pressure in the area. The molting period occurred in the dry season peaking in October. The analysis of growth, based on the parameters of von Bertalanffy was calculated using the nonlinear fit using modes (AJMOD). High growth rates for both males (L = 7.54 cm, k = 0.95, t0 =- 00:08; tmax = 4.84) and females (L = 6.50, k = 1 , 2, t0 =- 0008; tmax = 3.28) were found, contrasting with data from the literature, using other techniques. Males had higher asymptotic width size and longevity, but a lower growth constant when compared with females. The estimated age, for males and females, reaching the minimum capture size was 1.82 years and 1.63 years respectively. The size of physiological maturity, when individuals are able to reproduce, was estimated at 1.4 years and 1.05 years, for males and females, respectively. The recruitment period for this species is seasonal, with two peaks of occurrence, one in the rainy season and one in the dry season. This work represented the first effort on understanding the ecology of the mangrove crab, to the northern coast of Rio Grande do Norte. However, further studies on its biology should be undertaken, especially those related to growth, and recruitment, where observed that literature is more scarce

El desarrollo de complejos forestales en América Latina

Incluye Bibliografía

Panamá: pobreza y distribución del ingreso en el período 2001-2007

Incluye Bibliografía

Mercados de tierras rurales en la República Dominicana

Incluye Bibliografía

El mercado vitivinícola mundial y el flujo de inversión extranjera a Chile

Incluye Bibliografía

Apertura y cambio estructural de la economía brasileña

Incluye Bibliografía

Desarrollo turístico en el Calafate

Incluye Bibliografía

Manual de prospectiva y decisión estratégica: bases teóricas e instrumentos para América Latina y el Caribe

Incluye Bibliografía

International trade and transport profiles of Latin American countries, year 2000

Presentación (volumen, valor, origen-destino, modos de transporte, costos de fletes-seguros y productos comerciados) El documento consta de dos partes; la primera incluye la Introducción, donde se detalla el alcance y el contenido de la BTI (Base de datos de Transporte Internacional) mantenida por la Unidad de Transporte de CEPAL. Esta Base de datos abarca estadísticas anuales relativas al flujo comercial y de transporte de Argentina, Bolivia, Brasil, Chile, Colombia, Ecuador, México, Paraguay, Perú, Uruguay y Venezuela. Los lectores son informados acerca de los campos de información incluidos en la base de datos y, si están interesados, pueden requerir información estadística específica, caso por caso a la Unidad de Transporte de CEPAL. La segunda parte del documento contiene cuadros detallados y gráficos relativos al valor y volumen de las importaciones y exportaciones de once países latinoamericanos, cubiertos por la BTI. También se incluye información acerca del uso de diferentes modos de transporte, los costos de los fletes y seguros internacionales y los productos comerciados. La información se refiere al año 2000 y está agrupada por los códigos de la Clasificación Uniforme para el Comercio Internacional (CUCI). El documento por el momento, sólo está disponible en inglés.

Experiencias y metodología de la investigación participativa

Incluye Bibliografía

Estructura y competitividad de la industria brasileña de bienes de capital

Incluye Bibliografía