ACE research vignette 001 : benefits and drawbacks of start-up team heterogeneity

This series of research vignettes is aimed at sharing current and interesting research findings from our team of international Entrepreneurship researchers. In this vignette, Dr. Micheal Stuetzer considers some of the benefits and drawbacks associated with team start-up.

Phenolics in sugar cane juice : potential degradation by hydrogen peroxide and Fenton's reagent

The presence of colour in raw sugar plays a key role in the marketing strategy of the Australian raw sugar industry. Some sugars are relatively difficult to decolourise during refining and develop colour during storage. A new approach that might result in efficient and cost-effective colour removal during the sugar manufacturing process is the use of an advanced oxidation process (AOP), known as Fenton oxidation, that is, catalytic production of hydroxyl radicals from the decomposition of hydrogen peroxide using ferrous iron. As a first step towards developing this technology, this study determined the composition of colour precursors present in the juice of cane harvested by three different methods. The methods were harvesting cane after burning, harvesting the whole crop with half of the trash extracted and harvesting the whole crop with no trash extracted. The study also investigated the degradation at pH 3, 4 and 5 of a phenolic compound, caffeic acid (3,4–dihydroxycinnamic acid), which is present in sugar cane juice, using both hydrogen peroxide and Fenton’s reagent. The results show that juice expressed from whole crop cane has significantly higher colour than juices expressed from burnt cane. However, the concentrations of phenolic acids were lower in the juices expressed from whole crop cane. The main phenolic acids present in these juices were p-coumaric, vanillic, 2,3–dihydroxybenzoic, gallic and 3,4–dihydroxybenzoic acids. The degradation of caffeic acid significantly improved using Fenton’s reagent in comparison to hydrogen peroxide alone. The Fenton oxidation was optimum at pH 5 when up to ~86 % of caffeic acid degraded within 5 min.

Efficient safety message dissemination for cooperative collision warning via context modelling

A Cooperative Collision Warning System (CCWS) is an active safety techno- logy for road vehicles that can potentially reduce traffic accidents. It provides a driver with situational awareness and early warnings of any possible colli- sions through an on-board unit. CCWS is still under active research, and one of the important technical problems is safety message dissemination. Safety messages are disseminated in a high-speed mobile environment using wireless communication technology such as Dedicated Short Range Communication (DSRC). The wireless communication in CCWS has a limited bandwidth and can become unreliable when used inefficiently, particularly given the dynamic nature of road traffic conditions. Unreliable communication may significantly reduce the performance of CCWS in preventing collisions. There are two types of safety messages: Routine Safety Messages (RSMs) and Event Safety Messages (ESMs). An RSM contains the up-to-date state of a vehicle, and it must be disseminated repeatedly to its neighbouring vehicles. An ESM is a warning message that must be sent to all the endangered vehi- cles. Existing RSM and ESM dissemination schemes are inefficient, unscalable, and unable to give priority to vehicles in the most danger. Thus, this study investigates more efficient and scalable RSM and ESM dissemination schemes that can make use of the context information generated from a particular traffic scenario. Therefore, this study tackles three technical research prob- lems, vehicular traffic scenario modelling and context information generation, context-aware RSM dissemination, and context-aware ESM dissemination. The most relevant context information in CCWS is the information about possible collisions among vehicles given a current vehicular traffic situation. To generate the context information, this study investigates techniques to model interactions among multiple vehicles based on their up-to-date motion state obtained via RSM. To date, there is no existing model that can represent interactions among multiple vehicles in a speciffic region and at a particular time. The major outcome from the first problem is a new interaction graph model that can be used to easily identify the endangered vehicles and their danger severity. By identifying the endangered vehicles, RSM and ESM dis- semination can be optimised while improving safety at the same time. The new model enables the development of context-aware RSM and ESM dissemination schemes. To disseminate RSM efficiently, this study investigates a context-aware dis- semination scheme that can optimise the RSM dissemination rate to improve safety in various vehicle densities. The major outcome from the second problem is a context-aware RSM dissemination protocol. The context-aware protocol can adaptively adjust the dissemination rate based on an estimated channel load and danger severity of vehicle interactions given by the interaction graph model. Unlike existing RSM dissemination schemes, the proposed adaptive scheme can reduce channel congestion and improve safety by prioritising ve- hicles that are most likely to crash with other vehicles. The proposed RSM protocol has been implemented and evaluated by simulation. The simulation results have shown that the proposed RSM protocol outperforms existing pro- tocols in terms of efficiency, scalability and safety. To disseminate ESM efficiently, this study investigates a context-aware ESM dissemination scheme that can reduce unnecessary transmissions and deliver ESMs to endangered vehicles as fast as possible. The major outcome from the third problem is a context-aware ESM dissemination protocol that uses a multicast routing strategy. Existing ESM protocols use broadcast rout- ing, which is not efficient because ESMs may be sent to a large number of ve- hicles in the area. Using multicast routing improves efficiency because ESMs are sent only to the endangered vehicles. The endangered vehicles can be identified using the interaction graph model. The proposed ESM protocol has been implemented and evaluated by simulation. The simulation results have shown that the proposed ESM protocol can prevent potential accidents from occurring better than existing ESM protocols. The context model and the RSM and ESM dissemination protocols can be implemented in any CCWS development to improve the communication and safety performance of CCWS. In effect, the outcomes contribute to the realisation of CCWS that will ultimately improve road safety and save lives.

‘They get fed up with playing.’ Parents’ views on play-based learning in the Preparatory Year

Within early childhood education two ideas are firmly held: play is the best way for children to learn and parents are partners in the child’s learning. While these ideas have been explored, limited research to date has investigated the confluence of the two - how parents of young children view the concept of play. This paper investigates parents’ views on play by analysing the views of small group of parents of Prep Year children in Queensland, Australia. The parents in this study held varying definitions of what constitutes play, and complex and contradictory notions of its value. Positive views of play were linked to learning without knowing it, engaging in hands-on activities, and preparation for Year One through a strong focus on academic progress. Some parents held that Prep was play-based, while others did not. The complexities and diversity of parental opinion in this study echo the ongoing commentary about how play ought to be defined. Moreover, the notion that adults may interpret play in different ways is also reflected here. The authors suggest that for early childhood educators these complexities require an ongoing engagement, debate and reconceptualisation of the place of play in light of broader curricular and socio-political agendas.

A hierarchical evolutionary algorithmic design (HEAD) system for generating and evolving building design models

This thesis develops a detailed conceptual design method and a system software architecture defined with a parametric and generative evolutionary design system to support an integrated interdisciplinary building design approach. The research recognises the need to shift design efforts toward the earliest phases of the design process to support crucial design decisions that have a substantial cost implication on the overall project budget. The overall motivation of the research is to improve the quality of designs produced at the author's employer, the General Directorate of Major Works (GDMW) of the Saudi Arabian Armed Forces. GDMW produces many buildings that have standard requirements, across a wide range of environmental and social circumstances. A rapid means of customising designs for local circumstances would have significant benefits. The research considers the use of evolutionary genetic algorithms in the design process and the ability to generate and assess a wider range of potential design solutions than a human could manage. This wider ranging assessment, during the early stages of the design process, means that the generated solutions will be more appropriate for the defined design problem. The research work proposes a design method and system that promotes a collaborative relationship between human creativity and the computer capability. The tectonic design approach is adopted as a process oriented design that values the process of design as much as the product. The aim is to connect the evolutionary systems to performance assessment applications, which are used as prioritised fitness functions. This will produce design solutions that respond to their environmental and function requirements. This integrated, interdisciplinary approach to design will produce solutions through a design process that considers and balances the requirements of all aspects of the design. Since this thesis covers a wide area of research material, 'methodological pluralism' approach was used, incorporating both prescriptive and descriptive research methods. Multiple models of research were combined and the overall research was undertaken following three main stages, conceptualisation, developmental and evaluation. The first two stages lay the foundations for the specification of the proposed system where key aspects of the system that have not previously been proven in the literature, were implemented to test the feasibility of the system. As a result of combining the existing knowledge in the area with the newlyverified key aspects of the proposed system, this research can form the base for a future software development project. The evaluation stage, which includes building the prototype system to test and evaluate the system performance based on the criteria defined in the earlier stage, is not within the scope this thesis. The research results in a conceptual design method and a proposed system software architecture. The proposed system is called the 'Hierarchical Evolutionary Algorithmic Design (HEAD) System'. The HEAD system has shown to be feasible through the initial illustrative paper-based simulation. The HEAD system consists of the two main components - 'Design Schema' and the 'Synthesis Algorithms'. The HEAD system reflects the major research contribution in the way it is conceptualised, while secondary contributions are achieved within the system components. The design schema provides constraints on the generation of designs, thus enabling the designer to create a wide range of potential designs that can then be analysed for desirable characteristics. The design schema supports the digital representation of the human creativity of designers into a dynamic design framework that can be encoded and then executed through the use of evolutionary genetic algorithms. The design schema incorporates 2D and 3D geometry and graph theory for space layout planning and building formation using the Lowest Common Design Denominator (LCDD) of a parameterised 2D module and a 3D structural module. This provides a bridge between the standard adjacency requirements and the evolutionary system. The use of graphs as an input to the evolutionary algorithm supports the introduction of constraints in a way that is not supported by standard evolutionary techniques. The process of design synthesis is guided as a higher level description of the building that supports geometrical constraints. The Synthesis Algorithms component analyses designs at four levels, 'Room', 'Layout', 'Building' and 'Optimisation'. At each level multiple fitness functions are embedded into the genetic algorithm to target the specific requirements of the relevant decomposed part of the design problem. Decomposing the design problem to allow for the design requirements of each level to be dealt with separately and then reassembling them in a bottom up approach reduces the generation of non-viable solutions through constraining the options available at the next higher level. The iterative approach, in exploring the range of design solutions through modification of the design schema as the understanding of the design problem improves, assists in identifying conflicts in the design requirements. Additionally, the hierarchical set-up allows the embedding of multiple fitness functions into the genetic algorithm, each relevant to a specific level. This supports an integrated multi-level, multi-disciplinary approach. The HEAD system promotes a collaborative relationship between human creativity and the computer capability. The design schema component, as the input to the procedural algorithms, enables the encoding of certain aspects of the designer's subjective creativity. By focusing on finding solutions for the relevant sub-problems at the appropriate levels of detail, the hierarchical nature of the system assist in the design decision-making process.

Development of a transformation system for sorghum (Sorghum bicolor L.)

Sorghum (Sorghum bicolor (L.) Moench) is the world’s fifth major cereal crop and holds importance as a construction material, food and fodder source. More recently, the potential of this plant as a biofuel source has been noted. Despite its agronomic importance, the use of sorghum production is being constrained by both biotic and abiotic factors. These challenges could be addressed by the use of genetic engineering strategies to complement conventional breeding techniques. However, sorghum is one of the most recalcitrant crops for genetic modification with the lack of an efficient tissue culture system being amongst the chief reasons. Therefore, the aim of this study was to develop an efficient tissue culture system for establishing regenerable embryogenic cell lines, micropropagation and acclimatisation for Sorghum bicolor and use this to optimise parameters for genetic transformation via Agrobacterium-mediated transformation and microprojectile bombardment. Using five different sorghum cultivars, SA281, 296B, SC49, Wray and Rio, numerous parameters were investigated in an attempt to establish an efficient and reproducible tissue culture and transformation system. Using immature embryos (IEs) as explants, regenerable embryogenic cell lines (ECLs) could only be established from cultivars SA281 and 296B. Large amounts of phenolics were produced from IEs of cultivars, SC49, Wary and Rio, and these compounds severely hindered callus formation and development. Cultivar SA281 also produced phenolics during regeneration. Attempts to suppress the production of these compounds in cultivars SA281 and SC49 using activated charcoal, PVP, ascorbic acid, citric acid and liquid filter paper bridge methods were either ineffective or had a detrimental effect on embryogenic callus formation, development and regeneration. Immature embryos sourced during summer were found to be far more responsive in vitro than those sourced during winter. In an attempt to overcome this problem, IEs were sourced from sorghum grown under summer conditions in either a temperature controlled glasshouse or a growth chamber. However, the performance of these explants was still inferior to that of natural summer-sourced explants. Leaf whorls, mature embryos, shoot tips and leaf primordia were found to be unsuitable as explants for establishing ECLs in sorghum cultivars SA281 and 296B. Using the florets of immature inflorescences (IFs) as explants, however, ECLs were established and regenerated for these cultivars, as well as for cultivar Tx430, using callus induction media, SCIM, and regeneration media, VWRM. The best in vitro responses, from the largest possible sized IFs, were obtained using plants at the FL-2 stage (where the last fully opened leaf was two leaves away from the flag leaf). Immature inflorescences could be stored at 25oC for up to three days without affecting their in vitro responses. Compared to IEs, the IFs were more robust in tissue culture and showed responses which were season and growth condition independent. A micropropagation protocol for sorghum was developed in this study. The optimum plant growth regulator (PGR) combination for the micropropagation of in vitro regenerated plantlets was found to be 1.0 mg/L BAP in combination with 0.5 mg/L NAA. With this protocol, cultivars 296B and SA281 produced an average of 57 and 13 off-shoots per plantlet, respectively. The plantlets were successfully acclimatised and developed into phenotypically normal plants that set seeds. A simplified acclimatisation protocol for in vitro regenerated plantlets was also developed. This protocol involved deflasking in vitro plantlets with at least 2 fully-opened healthy leaves and at least 3 roots longer than 1.5 cm, washing the media from the roots with running tap water, planting in 100 mm pots and placing in plastic trays covered with a clear plastic bag in a plant growth chamber. After seven days, the corners of the plastic cover were opened and the bags were completely removed after 10 days. All plantlets were successfully acclimatised regardless of whether 1:1 perlite:potting mix, potting mix, UC mix or vermiculite were used as potting substrates. Parameters were optimised for Agrobacterium-mediated transformation (AMT) of cultivars SA281, 296B and Tx430. The optimal conditions were the use of Agrobacterium strain LBA4404 at an inoculum density of 0.5 OD600nm, heat shock at 43oC for 3 min, use of the surfactant Pluronic F-68 (0.02% w/v) in the inoculation media with a pH of 5.2 and a 3 day co-cultivation period in dark at 22oC. Using these parameters, high frequencies of transient GFP expression was observed in IEs precultured on callus initiation media for 1-7 days as well as in four weeks old IE- and IF-derived callus. Cultivar SA281 appeared very sensitive to Agrobacterium since all tissue turned necrotic within two weeks post-exposure. For cultivar 296B, GFP expression was observed up to 20 days post co-cultivation but no stably transformed plants were regenerated. Using cultivar Tx430, GFP was expressed for up to 50 days post co-cultivation. Although no stably transformed plants of this cultivar were regenerated, this was most likely due to the use of unsuitable regeneration media. Parameters were optimised for transformation by particle bombardment (PB) of cultivars SA281, 296B and Tx430. The optimal conditions were use of 3-7 days old IEs and 4 weeks old IF callus, 4 hour pre- and post-bombardment osmoticum treatment, use of 0.6 µm gold microparticles, helium pressure of 1500 kPa and target distance of 15 cm. Using these parameters for PB, transient GFP expression was observed for up to 14, 30 and 50 days for cultivars SA281, 296B and Tx430, respectively. Further, the use of PB resulted in less tissue necrosis compared to AMT for the respective cultivars. Despite the presence of transient GFP expression, no stably transformed plants were regenerated. The establishment of regenerable ECLs and the optimization of AMT and PB parameters in this study provides a platform for future efforts to develop an efficient transformation protocol for sorghum. The development of GM sorghum will be an important step towards improving its agronomic properties as well as its exploitation for biofuel production.

The experiences of learner drivers, provisional drivers and supervisors with graduated driver licensing in two Australian jurisdictions

Newly licensed drivers on a provisional or intermediate licence have the highest crash risk when compared with any other group of drivers. In comparison, learner drivers have the lowest crash risk. Graduated driver licensing is one countermeasure that has been demonstrated to effectively reduce the crashes of novice drivers. This thesis examined the graduated driver licensing systems in two Australian states in order to better understand the behaviour of learner drivers, provisional drivers and the supervisors of learner drivers. By doing this, the thesis investigated the personal, social and environmental influences on novice driver behaviour as well as providing effective baseline data against which to measure subsequent changes to the licensing systems. In the first study, conducted prior to the changes to the graduated driver licensing system introduced in mid-2007, drivers who had recently obtained their provisional licence in Queensland and New South Wales were interviewed by telephone regarding their experiences while driving on their learner licence. Of the 687 eligible people approached to participate at driver licensing centres, 392 completed the study representing a response rate of 57.1 per cent. At the time the data was collected, New South Wales represented a more extensive graduated driver licensing system when compared with Queensland. The results suggested that requiring learners to complete a mandated number of hours of supervised practice impacts on the amount of hours that learners report completing. While most learners from New South Wales reported meeting the requirement to complete 50 hours of practice, it appears that many stopped practising soon after this goal was achieved. In contrast, learners from Queensland, who were not required to complete a specific number of hours at the time of the survey, tended to fall into three groups. The first group appeared to complete the minimum number of hours required to pass the test (less than 26 hours), the second group completed 26 to 50 hours of supervised practice while the third group completed significantly more practice than the first two groups (over 100 hours of supervised practice). Learner drivers in both states reported generally complying with the road laws and were unlikely to report that they had been caught breaking the road rules. They also indicated that they planned to obey the road laws once they obtained their provisional licence. However, they were less likely to intend to comply with recommended actions to reduce crash risk such as limiting their driving at night. This study also identified that there were relatively low levels of unaccompanied driving (approximately 15 per cent of the sample), very few driving offences committed (five per cent of the sample) and that learner drivers tended to use a mix of private and professional supervisors (although the majority of practice is undertaken with private supervisors). Consistent with the international literature, this study identified that very few learner drivers had experienced a crash (six per cent) while on their learner licence. The second study was also conducted prior to changes to the graduated driver licensing system and involved follow up interviews with the participants of the first study after they had approximately 21 months driving experience on their provisional licence. Of the 392 participants that completed the first study, 233 participants completed the second interview (representing a response rate of 59.4 per cent). As with the first study, at the time the data was collected, New South Wales had a more extensive graduated driver licensing system than Queensland. For instance, novice drivers from New South Wales were required to progress through two provisional licence phases (P1 and P2) while there was only one provisional licence phase in Queensland. Among the participants in this second study, almost all provisional drivers (97.9 per cent) owned or had access to a vehicle for regular driving. They reported that they were unlikely to break road rules, such as driving after a couple of drinks, but were also unlikely to comply with recommended actions, such as limiting their driving at night. When their provisional driving behaviour was compared to the stated intentions from the first study, the results suggested that their intentions were not a strong predictor of their subsequent behaviour. Their perception of risk associated with driving declined from when they first obtained their learner licence to when they had acquired provisional driving experience. Just over 25 per cent of participants in study two reported that they had been caught committing driving offences while on their provisional licence. Nearly one-third of participants had crashed while driving on a provisional licence, although few of these crashes resulted in injuries or hospitalisations. To complement the first two studies, the third study examined the experiences of supervisors of learner drivers, as well as their perceptions of their learner’s experiences. This study was undertaken after the introduction of the new graduated driver licensing systems in Queensland and New South Wales in mid- 2007, providing insights into the impacts of these changes from the perspective of supervisors. The third study involved an internet survey of 552 supervisors of learner drivers. Within the sample, approximately 50 per cent of participants supervised their own child. Other supervisors of the learner drivers included other parents or stepparents, professional driving instructors and siblings. For two-thirds of the sample, this was the first learner driver that they had supervised. Participants had provided an average of 54.82 hours (sd = 67.19) of supervision. Seventy-three per cent of participants indicated that their learners’ logbooks were accurate or very accurate in most cases, although parents were more likely than non-parents to report that their learners’ logbook was accurate (F (1,546) = 7.74, p = .006). There was no difference between parents and non-parents regarding whether they believed the log book system was effective (F (1,546) = .01, p = .913). The majority of the sample reported that their learner driver had had some professional driving lessons. Notwithstanding this, a significant proportion (72.5 per cent) believed that parents should be either very involved or involved in teaching their child to drive, with parents being more likely than non-parents to hold this belief. In the post mid-2007 graduated driver licensing system, Queensland learner drivers are able to record three hours of supervised practice in their log book for every hour that is completed with a professional driving instructor, up to a total of ten hours. Despite this, there was no difference identified between Queensland and New South Wales participants regarding the amount of time that they reported their learners spent with professional driving instructors (X2(1) = 2.56, p = .110). Supervisors from New South Wales were more likely to ensure that their learner driver complied with the road laws. Additionally, with the exception of drug driving laws, New South Wales supervisors believed it was more important to teach safety-related behaviours such as remaining within the speed limit, car control and hazard perception than those from Queensland. This may be indicative of more intensive road safety educational efforts in New South Wales or the longer time that graduated driver licensing has operated in that jurisdiction. However, other factors may have contributed to these findings and further research is required to explore the issue. In addition, supervisors reported that their learner driver was involved in very few crashes (3.4 per cent) and offences (2.7 per cent). This relatively low reported crash rate is similar to that identified in the first study. Most of the graduated driver licensing research to date has been applied in nature and lacked a strong theoretical foundation. These studies used Akers’ social learning theory to explore the self-reported behaviour of novice drivers and their supervisors. This theory was selected as it has previously been found to provide a relatively comprehensive framework for explaining a range of driver behaviours including novice driver behaviour. Sensation seeking was also used in the first two studies to complement the non-social rewards component of Akers’ social learning theory. This program of research identified that both Akers’ social learning theory and sensation seeking were useful in predicting the behaviour of learner and provisional drivers over and above socio-demographic factors. Within the first study, Akers’ social learning theory accounted for an additional 22 per cent of the variance in learner driver compliance with the law, over and above a range of socio-demographic factors such as age, gender and income. The two constructs within Akers’ theory which were significant predictors of learner driver compliance were the behavioural dimension of differential association relating to friends, and anticipated rewards. Sensation seeking predicted an additional six per cent of the variance in learner driver compliance with the law. When considering a learner driver’s intention to comply with the law while driving on a provisional licence, Akers’ social learning theory accounted for an additional 10 per cent of the variance above socio-demographic factors with anticipated rewards being a significant predictor. Sensation seeking predicted an additional four per cent of the variance. The results suggest that the more rewards individuals anticipate for complying with the law, the more likely they are to obey the road rules. Further research is needed to identify which specific rewards are most likely to encourage novice drivers’ compliance with the law. In the second study, Akers’ social learning theory predicted an additional 40 per cent of the variance in self-reported compliance with road rules over and above socio-demographic factors while sensation seeking accounted for an additional five per cent of the variance. A number of Aker’s social learning theory constructs significantly predicted provisional driver compliance with the law, including the behavioural dimension of differential association for friends, the normative dimension of differential association, personal attitudes and anticipated punishments. The consistent prediction of additional variance by sensation seeking over and above the variables within Akers’ social learning theory in both studies one and two suggests that sensation seeking is not fully captured within the non social rewards dimension of Akers’ social learning theory, at least for novice drivers. It appears that novice drivers are strongly influenced by the desire to engage in new and intense experiences. While socio-demographic factors and the perception of risk associated with driving had an important role in predicting the behaviour of the supervisors of learner drivers, Akers’ social learning theory provided further levels of prediction over and above these factors. The Akers’ social learning theory variables predicted an additional 14 per cent of the variance in the extent to which supervisors ensured that their learners complied with the law and an additional eight per cent of the variance in the supervisors’ provision of a range of practice experiences. The normative dimension of differential association, personal attitudes towards the use of professional driving instructors and anticipated rewards were significant predictors for supervisors ensuring that their learner complied with the road laws, while the normative dimension was important for range of practice. This suggests that supervisors who engage with other supervisors who ensure their learner complies with the road laws and provide a range of practice to their own learners are more likely to also engage in these behaviours. Within this program of research, there were several limitations including the method of recruitment of participants within the first study, the lower participation rate in the second study, an inability to calculate a response rate for study three and the use of self-report data for all three studies. Within the first study, participants were only recruited from larger driver licensing centres to ensure that there was a sufficient throughput of drivers to approach. This may have biased the results due to the possible differences in learners that obtain their licences in locations with smaller licensing centres. Only 59.4 per cent of the sample in the first study completed the second study. This may be a limitation if there was a common reason why those not participating were unable to complete the interview leading to a systematic impact on the results. The third study used a combination of a convenience and snowball sampling which meant that it was not possible to calculate a response rate. All three studies used self-report data which, in many cases, is considered a limitation. However, self-report data may be the only method that can be used to obtain some information. This program of research has a number of implications for countermeasures in both the learner licence phase and the provisional licence phase. During the learner phase, licensing authorities need to carefully consider the number of hours that they mandate learner drivers must complete before they obtain their provisional driving licence. If they mandate an insufficient number of hours, there may be inadvertent negative effects as a result of setting too low a limit. This research suggests that logbooks may be a useful tool for learners and their supervisors in recording and structuring their supervised practice. However, it would appear that the usage rates for logbooks will remain low if they remain voluntary. One strategy for achieving larger amounts of supervised practice is for learner drivers and their supervisors to make supervised practice part of their everyday activities. As well as assisting the learner driver to accumulate the required number of hours of supervised practice, it would ensure that they gain experience in the types of environments that they will probably encounter when driving unaccompanied in the future, such as to and from education or work commitments. There is also a need for policy processes to ensure that parents and professional driving instructors communicate effectively regarding the learner driver’s progress. This is required as most learners spend at least some time with a professional instructor despite receiving significant amounts of practice with a private supervisor. However, many supervisors did not discuss their learner’s progress with the driving instructor. During the provisional phase, there is a need to strengthen countermeasures to address the high crash risk of these drivers. Although many of these crashes are minor, most involve at least one other vehicle. Therefore, there are social and economic benefits to reducing these crashes. If the new, post-2007 graduated driver licensing systems do not significantly reduce crash risk, there may be a need to introduce further provisional licence restrictions such as separate night driving and peer passenger restrictions (as opposed to the hybrid version of these two restrictions operating in both Queensland and New South Wales). Provisional drivers appear to be more likely to obey some provisional licence laws, such as lower blood alcohol content limits, than others such as speed limits. Therefore, there may be a need to introduce countermeasures to encourage provisional drivers to comply with specific restrictions. When combined, these studies provided significant information regarding graduated driver licensing programs. This program of research has investigated graduated driver licensing utilising a cross-sectional and longitudinal design in order to develop our understanding of the experiences of novice drivers that progress through the system in order to help reduce crash risk once novice drivers commence driving by themselves.

Practical client puzzles in the standard model

Client puzzles are cryptographic problems that are neither easy nor hard to solve. Most puzzles are based on either number theoretic or hash inversions problems. Hash-based puzzles are very efficient but so far have been shown secure only in the random oracle model; number theoretic puzzles, while secure in the standard model, tend to be inefficient. In this paper, we solve the problem of constucting cryptographic puzzles that are secure int he standard model and are very efficient. We present an efficient number theoretic puzzle that satisfies the puzzle security definition of Chen et al. (ASIACRYPT 2009). To prove the security of our puzzle, we introduce a new variant of the interval discrete logarithm assumption which may be of independent interest, and show this new problem to be hard under reasonable assumptions. Our experimental results show that, for 512-bit modulus, the solution verification time of our proposed puzzle can be up to 50x and 89x faster than the Karame-Capkum puzzle and the Rivest et al.'s time-lock puzzle respectively. In particular, the solution verification tiem of our puzzle is only 1.4x slower than that of Chen et al.'s efficient hash based puzzle.

A parallel cooperative co-evolutionary genetic algorithm for the composite SaaS placement problem in Cloud computing

A composite SaaS (Software as a Service) is a software that is comprised of several software components and data components. The composite SaaS placement problem is to determine where each of the components should be deployed in a cloud computing environment such that the performance of the composite SaaS is optimal. From the computational point of view, the composite SaaS placement problem is a large-scale combinatorial optimization problem. Thus, an Iterative Cooperative Co-evolutionary Genetic Algorithm (ICCGA) was proposed. The ICCGA can find reasonable quality of solutions. However, its computation time is noticeably slow. Aiming at improving the computation time, we propose an unsynchronized Parallel Cooperative Co-evolutionary Genetic Algorithm (PCCGA) in this paper. Experimental results have shown that the PCCGA not only has quicker computation time, but also generates better quality of solutions than the ICCGA.

Friedman Economic Policies, Social Exclusion and Crime: Toward a Gendered Left Realist Subcultural Theory.

Left realists contend that people lacking legitimate means of solving the problem of relative deprivation may come into contact with other frustrated disenfranchised people and form subcultures, which in turn, encourage criminal behaviors. Absent from this theory is an attempt to address how, today, subcultural development in North America and elsewhere is heavily shaped simultaneously by the recent destructive consequences of right-wing Friedman or Chicago School economic policies and marginalized men's attempts to live up to the principles of hegemonic masculinity. The purpose of this paper, then, is to offer a new left realist theory that emphasizes the contribution of these two key determinants.