Validação de uma escala de atitudes de docentes do 1.º ciclo do ensino básico, relativamente à utilização da tecnologia em ambiente educativo

Dissertação de mest. em Observação e Análise da Relação Educativa, Faculdade de Ciências Humanas e Sociais, Univ. do Algarve, Escola Superior de Educação, Instituto Politécnico de Beja, 2004

Integração entre frameworks de suporte à gestão e governação das tecnologias de informação : modelação da Norma ISO 9001

A ISO 9001 e Arquiteturas Empresariais (AE), diferentes ferramentas de Governação com diferentes perspetivas, são dominantes entre os seus praticantes. Uma representação de uma ISO 9001 em ArchiMate pode potenciar ainda mais alinhamentos com outras frameworks representadas por AE e pode ajudar na obtenção de melhores resultados na implementação da Qualidade numa organização, obviando os custos e a duplicação de esforços. Esta tese propõe uma abordagem de integração entre a ISO 9001 e AE na perspetiva das AE ao propor um mapeamento de conceitos de ISO 9001 em EA pela definição de uma Arquitetura de Referência da ISO 9001 utilizando a linguagem de modelação do ArchiMate Dois objetivos são endereçados: a demonstração da capacidade de representar todos os requisitos da ISO 9001 em componentes de AE através do desenvolvimento da Arquitetura de Referência e reciprocamente a capacidade de desenvolver uma AE de um Sistema de Gestão da Qualidade (SGQ) teórico baseado na ISO 9001 com as componentes dessa Arquitetura de Referência. Adicionalmente, ao identificar e avaliar a existência das componentes da Arquitetura de Referência numa organização concreta, se estes não estão completamente mapeados, pode-se concluir a existência de um desvio relativamente ao referencial ISO 9001. Por ultimo, uma Arquitetura de Referência ArchiMate da ISO 9001 permite a partilha de conhecimento, a comunicação entre partes interessadas e contribui para a discussão e validação da ISO 9001 entre os utilizadores de Arquiteturas Empresariais.

WRITING A COMMUNITY GUIDEBOOK FOR EVALUATING LOW-GRADE GEOTHERMAL ENERGY FROM FLOODED UNDERGROUND MINES FOR HEATING AND COOLING BUILDINGS

When underground mines close they often fill with water from ground and surface sources; each mine can contain millions to billions of gallons of water. This water, heated by the Earth’s geothermal energy, reaches temperatures ideal for heat pumps. The sheer scale of these flooded underground mines presents a unique opportunity for large scale geothermal heat pump setups which would not be as economically, socially, and environmentally feasible anywhere else. A literature search revealed approximately 30 instances of flooded underground mines being used to heat and cool buildings worldwide. With thousands of closed/abandoned underground mines in the U.S. and a million estimated globally, why hasn’t this opportunity been more widely adopted? This project has found perception and lack of knowledge about the feasibility to be key barriers. To address these issues, this project drafted a guidebook for former mining communities titled A Community Guide to Mine Water Geothermal Heating and Cooling.

EQUASS Assurance Certification: The View of Pioneer Adopters

Purpose – The paper examines from a practitioner’s perspective the European Quality in Social Services (EQUASS) Assurance standard, a certification programme for European social service organisations to implement a sector-specific Quality Management System. In particular, it analyses the adoption motives, the internalisation of the standard, the impacts, the satisfaction and the renew intentions. Design/methodology/approach – This study uses a cross-sectional, questionnaire-based survey methodology. From the 381 organisations emailed, 196 responses coming from eight different European countries were considered valid (51.4%). Data from closed-ended questions were analysed using simple descriptive statistical techniques. Content analysis was employed to analyse practitioner’s comments to open-ended questions. Findings – It shows that social service providers typically implement the certification for internal reasons, and internalise EQUASS principles and practices in daily usage. EQUASS Assurance produces benefits mainly at the operational and customer levels, whereas its main pitfalls include increased workload and bureaucracy. The majority of respondents (85.2%) are very satisfied or satisfied with the certification, suggesting that it meets their expectations. Certification renewal intentions are also high but some respondents report that the final decision depends on several factors. The insights gained through the qualitative data are also described. Practical implications – It can be helpful to managers, consultants and Local License Holders working (or planning to work) with this standard. It can inform the work of the EQUASS Technical Working Group in the forthcoming revision of the standard. Originality/value – This is the largest survey conducted so far about EQUASS Assurance in terms of number of respondents, participating countries and topics covered.

Subfilter-scale Stress Modelling for Large Eddy Simulations

A subfilter-scale (SFS) stress model is developed for large-eddy simulations (LES) and is tested on various benchmark problems in both wall-resolved and wall-modelled LES. The basic ingredients of the proposed model are the model length-scale, and the model parameter. The model length-scale is defined as a fraction of the integral scale of the flow, decoupled from the grid. The portion of the resolved scales (LES resolution) appears as a user-defined model parameter, an advantage that the user decides the LES resolution. The model parameter is determined based on a measure of LES resolution, the SFS activity. The user decides a value for the SFS activity (based on the affordable computational budget and expected accuracy), and the model parameter is calculated dynamically. Depending on how the SFS activity is enforced, two SFS models are proposed. In one approach the user assigns the global (volume averaged) contribution of SFS to the transport (global model), while in the second model (local model), SFS activity is decided locally (locally averaged). The models are tested on isotropic turbulence, channel flow, backward-facing step and separating boundary layer. In wall-resolved LES, both global and local models perform quite accurately. Due to their near-wall behaviour, they result in accurate prediction of the flow on coarse grids. The backward-facing step also highlights the advantage of decoupling the model length-scale from the mesh. Despite the sharply refined grid near the step, the proposed SFS models yield a smooth, while physically consistent filter-width distribution, which minimizes errors when grid discontinuity is present. Finally the model application is extended to wall-modelled LES and is tested on channel flow and separating boundary layer. Given the coarse resolution used in wall-modelled LES, near the wall most of the eddies become SFS and SFS activity is required to be locally increased. The results are in very good agreement with the data for the channel. Errors in the prediction of separation and reattachment are observed in the separated flow, that are somewhat improved with some modifications to the wall-layer model.

Some comments about the use of GHP in Alentejo (Portugal)

In this work we advocate the use of geothermal pumps to cool the isolated houses that can be observed in the plain of Alentejo. Passive cooling of the houses, made for centuries, becomes insufficient when it aims to promote tourism in the region. The climatic characteristics of the region and the relatively high values of the thermal conductivity of the ground favour this type of use. The available land around the houses provide places where you can drill or make trenches to put the pipes under the surface . Some values of pipe lengths were obtained using values appropriate for the region. The need to try to preserve the shape of the typical houses of the region discourages the use of solar panels placed on the roofs. The length and time of use of the equipment is another factor to take into account in the analysis of the costs.

Satisfação dos utilizadores de um serviço público: Caso: Direcção Regional de Mobilidade e Transportes do Alentejo

"A Administração Pública visa a prossecução do interesse público, no respeito pelos direitos e interesses legalmente protegidos dos Cidadãos" (art.º266 Constituição da República Portuguesa). Este estudo subordinado ao tema: "Satisfação dos utilizadores de um Serviço Público - Caso: Direcção Regional de Mobilidade e Transportes do Alentejo” centra-se na investigação, da satisfação e percepção do utilizador dos serviços, na sequência da sua utilização, como forma de satisfazer as suas necessidades. Esta investigação foi desenvolvida em duas partes, a primeira reflecte uma pesquisa teórica sobre a temática, objecto de estudo. A segunda, incidiu na análise e no tratamento dos dados, obtidos através de um questionário, distribuído aos utilizadores da D.R.M.T. Alentejo (Évora, Beja e Portalegre). /ABSTRACT: "The Government aims to further the public interest, while respecting the rights and legally protected interests of citizens" (Article 266 Constitution ofthe Portuguese). This study entitled "Users Satisfaction of a Public Service - Case: Regional Direction of Mobility and Transports of Alentejo" focuses on research, customer satisfaction and perception of the service user, following its use as a way to meet their needs. This research was conducted in two parts, the first reflects a theoretical research on the subject, the subject of study. The second, focused on analyzing and processing data, obtained through a questionnaire distributed to users.

Development of Optimal Energy Management Strategies for a Hybrid Boat

The present work proposes different approaches to extend the mathematical methods of supervisory energy management used in terrestrial environments to the maritime sector, that diverges in constraints, variables and disturbances. The aim is to find the optimal real-time solution that includes the minimization of a defined track time, while maintaining the classical energetic approach. Starting from analyzing and modelling the powertrain and boat dynamics, the energy economy problem formulation is done, following the mathematical principles behind the optimal control theory. Then, an adaptation aimed in finding a winning strategy for the Monaco Energy Boat Challenge endurance trial is performed via ECMS and A-ECMS control strategies, which lead to a more accurate knowledge of energy sources and boat’s behaviour. The simulations show that the algorithm accomplishes fuel economy and time optimization targets, but the latter adds huge tuning and calculation complexity. In order to assess a practical implementation on real hardware, the knowledge of the previous approaches has been translated into a rule-based algorithm, that let it be run on an embedded CPU. Finally, the algorithm has been tuned and tested in a real-world race scenario, showing promising results.

The interplay of multiplicity and effective energy for (multi) strange hadron production in pp collisions at the LHC

The enhanced production of strange hadrons in heavy-ion collisions relative to that in minimum-bias pp collisions is historically considered one of the first signatures of the formation of a deconfined quark-gluon plasma. At the LHC, the ALICE experiment observed that the ratio of strange to non-strange hadron yields increases with the charged-particle multiplicity at midrapidity, starting from pp collisions and evolving smoothly across interaction systems and energies, ultimately reaching Pb-Pb collisions. The understanding of the origin of this effect in small systems remains an open question. This thesis presents a comprehensive study of the production of $K^{0}_{S}$, $\Lambda$ ($\bar{\Lambda}$) and $\Xi^{-}$ ($\bar{\Xi}^{+}$) strange hadrons in pp collisions at $\sqrt{s}$ = 13 TeV collected in LHC Run 2 with ALICE. A novel approach is exploited, introducing, for the first time, the concept of effective energy in the study of strangeness production in hadronic collisions at the LHC. In this work, the ALICE Zero Degree Calorimeters are used to measure the energy carried by forward emitted baryons in pp collisions, which reduces the effective energy available for particle production with respect to the nominal centre-of-mass energy. The results presented in this thesis provide new insights into the interplay, for strangeness production, between the initial stages of the collision and the produced final hadronic state. Finally, the first Run 3 results on the production of $\Omega^{\pm}$ ($\bar{\Omega}^{+}$) multi-strange baryons are presented, measured in pp collisions at $\sqrt{s}$ = 13.6 TeV and 900 GeV, the highest and lowest collision energies reached so far at the LHC. This thesis also presents the development and validation of the ALICE Time-Of-Flight (TOF) data quality monitoring system for LHC Run 3. This work was fundamental to assess the performance of the TOF detector during the commissioning phase, in the Long Shutdown 2, and during the data taking period.

Revisione sistematica della letteratura sull’efficacia del resistance training nel trattamento dei pazienti affetti da fibromialgia

Background: La fibromialgia è una sindrome cronica caratterizzata da dolore muscolo-scheletrico associato ad altri sintomi quali stanchezza, depressione, ansia e disturbi del sonno. Questa patologia colpisce tra il 2% ed il 4% della popolazione mondiale, con un’incidenza maggiore nel sesso femminile. Chi ne è affetto riferisce un significativo peggioramento delle relazioni sociali e della qualità di vita. Il resistance training, di cui sono noti i molteplici benefici sulla salute fisica e mentale dell’individuo, è stato di recente proposto come strategia terapeutica in questa tipologia di pazienti. Obiettivo: Ricercare in letteratura prove dell’efficacia di un approccio terapeutico basato sul resistance training per ridurre il dolore e migliorare la qualità di vita nei pazienti affetti da fibromialgia. Materiali e metodi: Sono state indagate le banche dati PubMed, PEDro e Cochrane Library utilizzando quattro diverse stringhe di ricerca, ottenute combinando le parole chiave con gli operatori booleani. Per la selezione degli studi è stato impiegato il diagramma di flusso PRISMA. Sono stati inclusi solo gli RCT che proponevano un programma di resistance training non combinato con altre metodiche riabilitative. Risultati: Dei 327 articoli inizialmente individuati sono stati inclusi 3 studi che mettevano a confronto il resistance training con altre metodiche riabilitative. Tutti e tre gli studi hanno dimostrato una riduzione statisticamente significativa dell’intensità del dolore e un miglioramento, seppur non sempre significativo, della qualità di vita. Conclusioni: Gli studi selezionati hanno evidenziato un effetto benefico del resistance training, se effettuato con regolarità e costanza, nel ridurre l’intensità del dolore e migliorare la qualità di vita nei pazienti affetti da fibromialgia. Tuttavia, visto il numero ancora limitato di studi sull’argomento, è auspicabile lo svolgimento di ulteriori trials per poter acquisire maggiori prove di efficacia.

Cluster identification and characterization in the riser of a circulating fluidized bed from numerical simulation results

A methodology of identification and characterization of coherent structures mostly known as clusters is applied to hydrodynamic results of numerical simulation generated for the riser of a circulating fluidized bed. The numerical simulation is performed using the MICEFLOW code, which includes the two-fluids IIT`s hydrodynamic model B. The methodology for cluster characterization that is used is based in the determination of four characteristics, related to average life time, average volumetric fraction of solid, existing time fraction and frequency of occurrence. The identification of clusters is performed by applying a criterion related to the time average value of the volumetric solid fraction. A qualitative rather than quantitative analysis is performed mainly owing to the unavailability of operational data used in the considered experiments. Concerning qualitative analysis, the simulation results are in good agreement with literature. Some quantitative comparisons between predictions and experiment were also presented to emphasize the capability of the modeling procedure regarding the analysis of macroscopic scale coherent structures. (c) 2007 Elsevier Inc. All rights reserved.

Predicting plant leaf area production: shoot assimilate accumulation and partitioning, and leaf area ratio, are stable for a wide range of sorghum population densities

Predicting plant leaf area production is required for modelling carbon balance and tiller dynamics in plant canopies. Plant leaf area production can be studied using a framework based on radiation intercepted, radiation use efficiency (RUE) and leaf area ratio (LAR) (ratio of leaf area to net above-ground biomass). The objective of this study was to test this framework for predicting leaf area production of sorghum during vegetative development by examining the stability of the contributing components over a large range of plant density. Four densities, varying from 2 to 16 plants m(-2), were implemented in a field experiment. Plants were either allowed to tiller or were maintained as uniculm by systematic tiller removal. In all cases, intercepted radiation was recorded daily and leaf area and shoot dry matter partitioning were quantified weekly at individual culm level. Up to anthesis, a unique relationship applied between fraction of intercepted radiation and leaf area index, and between shoot dry weight accumulation and amount of intercepted radiation, regardless of plant density. Partitioning of shoot assimilate between leaf, stem and head was also common across treatments up to anthesis, at both plant and culm levels. The relationship with thermal time (TT) from emergence of specific leaf area (SLA) and LAR of tillering plants did not change with plant density. In contrast, SLA of uniculm plants was appreciably lower under low-density conditions at any given TT from emergence. This was interpreted as a consequence of assimilate surplus arising from the inability of the plant to compensate by increasing the leaf area a culm could produce. It is argued that the stability of the extinction coefficient, RUE and plant LAR of tillering plants observed in these conditions provides a reliable way to predict leaf area production regardless of plant density. Crown Copyright (C) 2002 Published by Elsevier Science B.V. All rights reserved.

A simulation tool for demand response programs implementation

The design and development of simulation models and tools for Demand Response (DR) programs are becoming more and more important for adequately taking the maximum advantages of DR programs use. Moreover, a more active consumers’ participation in DR programs can help improving the system reliability and decrease or defer the required investments. DemSi, a DR simulator, designed and implemented by the authors of this paper, allows studying DR actions and schemes in distribution networks. It undertakes the technical validation of the solution using realistic network simulation based on PSCAD. DemSi considers the players involved in DR actions, and the results can be analyzed from each specific player point of view.

Numerical analysis of the initial conditions in fractional systems

Fractional dynamics is a growing topic in theoretical and experimental scientific research. A classical problem is the initialization required by fractional operators. While the problem is clear from the mathematical point of view, it constitutes a challenge in applied sciences. This paper addresses the problem of initialization and its effect upon dynamical system simulation when adopting numerical approximations. The results are compatible with system dynamics and clarify the formulation of adequate values for the initial conditions in numerical simulations.

Numerical analysis of the initial conditions in fractional systems

Fractional dynamics is a growing topic in theoretical and experimental scientific research. A classical problem is the initialization required by fractional operators. While the problem is clear from the mathematical point of view, it constitutes a challenge in applied sciences. This paper addresses the problem of initialization and its effect upon dynamical system simulation when adopting numerical approximations. The results are compatible with system dynamics and clarify the formulation of adequate values for the initial conditions in numerical simulations.