Physical soil characteristics of waterlogged and saline lands of five districts of Haryana, India

Physical characteristics of waterlogged and saline soils of five districts, namely Rohtak, Faridabad, Gurgaon, Sonipat and Jhajjar, of Haryana were studied to evaluate the aquaculture potential. The soil samples from 76 sites were procured and analysed for pH, electrical conductivity, soil particles and water retention capacity, since the knowledge of these parameters is essential for the preliminary evaluation of a site for aqua-farming. Six soil types were identified and clay-loam was observed to be the maximum at 45 (59.21%) sites, followed by silty-clay loam at 14 (18.42%), sandy-clay loam at six (7.89%), silty-loam at four (5.26%), sandy-loam at four (5.26%) and loam at three (3.94%) sites. The pH of soil indicated moderate to high alkaline conditions ranging between 8.01and 9.00 at 53 (69.73%) sites, 9.01 and 10.00 at 17 (22.36%) sites, and low between 7.01 and 8.00 at six (7.89%) sites. The electrical conductivity was found to range between <1 and 10 mmho cmˉ¹ with the value of <1.0 mmho cmˉ¹ at 36 (47.36%) sites. The water retention capacity was observed mostly to be moderate. The paper describes the interrelationship between these parameters with reference to the suitability for aqua-farming.

Comparative economic analysis of pond fish production in Mymensingh and Jessore Districts, Bangladesh

The study was conducted to determine the cost, return and relative profitability of pond fish production of Mymensingh and Jessore districts. A total of 75 ponds were selected on the basis of purposive random sampling technique from 7 villages under 2 Upazila (Trishal and Gouripur) of Mymensingh districts and 8 villages under 4 Upazila (Monimmpur, Jhikorgacha, Chowgacha and Sadar) of Jessore district. It was found that per hectare per year gross cost of pond fish production in Mymensingh and Jessore were Tk 333457.75 and Tk 54327.74, while gross return were Tk 434131.16 and Tk. 96640.00 and net return were Tk 100673.41 and Tk. 42312.26, respectively. The findings of this study revealed that the pond fish production in Jessore district was more profitable than that of Mymensingh district. Cobb-Douglas production function was applied to realize the specific effect of the factors on pond fish production. Out of six variables included in the function three variables had positive impact on return from pond fish production, in Mymensingh district but five variables had positive impact on return from pond fish production in Jessore district

Input-output relationship and economics of pangas monoculture and carp-pangas polyculture in two districts of Bangladesh

An attempt was made to study the input-output relationships and economics of pangas monoculture and carp-pangas polyculture in Bangladesh. By analyzing the data collected from 50 pangas farms and 55 carp-pangas farms, the study has investigated the production systems of two technologies and the effects of fingerling stocking and applications of feed and fertilizer on fisheries income. The data were collected from the fishermen of Trishal and Bhaluka of Mymensingh district, and Kahaloo and Adamdighee of Bogra district during 2001-02. For pangas monoculture, the stocking density was 31,561 per ha while it was 55,017 per ha in carp-pangas polyculture. Most of the farmers used urea, TSP and lime before stocking. Rice and wheat bran happened to be the most common feed ingredients for both types of culture in general. Other important ingredients used were mustard oil-cakes, rice polish, wheat flour, fish meal, bone meal, soybean meal and poultry litter. In terms of quantities, rice bran and wheat bran dominated the farmers list. Rice and wheat bran together constituted about 60% of all studied feeds. Feed cost constituted 59.13% of total costs for pangas monoculture and 67.44% for carp-pangas polyculture. Per ha productions of pangas and carp-pangas in a single culture cycle were 15,508 kg and 19,745 kg, respectively. Per ha gross profits were estimated to be Tk 310,311 and Tk 464,418 for pangas monoculture and carp-pangas polyculture, respectively. Net profit appeared to be Tk 264,216 per ha for pangas monoculture and Tk 416,509 per ha for carp-pangas polyculture. The BCRs calculated were 1.46 and 1.68 for monoculture and polyculture, respectively. The break-even costs per kg of fish were estimated at Tk 36.93 for pangas and Tk 30.93 for mixed species which was much lower than the prices the producers received. Break-even productions were estimated at 10,702 kg per ha for pangas monoculture and 11,784 kg per ha for carp-pangas polyculture. Fingerling and feed cost, and pond size significantly explained the variation of income from pangas monoculture. These factors have significantly influenced the income from the crop. Functional analysis shows that 1% increase in the feed cost might increase 0.51% of pangas income and 0.41% in carp-pangas income. No other inputs had shown this much of responses to increasing income from a fish.

Adoption, productivity and profitability of rice-fish and fingerling culture in three selected districts of Bangladesh

The study aimed to investigate the productivity and profitability of rice-fish farming. It also determined the factors affecting rice-fish and fingerling production in Bangladesh. Among the total respondents about 55% were involved in rice-fish farming, 37% in pond fish culture and rest 9% in fish nursery. Integrated rice-fish farming contributed about 83% of the annual farm income in Comilla while it was about 20% in both Kishoregonj and Chandpur districts. Among the different farming systems integrated rice-fish culture and rearing fingerlings in the nursery pond were more profitable at the farm level. Farmers earned a net return of Tk. 49,714/ha from integrated fish culture with boro rice while the net return of boro rice-alone was only Tk. 11,179/ha. This indicated that farmer could earn 218% higher net return from integrated rice-fish farming than that of boro rice only farming. Moreover, integrated rice-fish culture also reduced pesticides cost to about 77% and weeding cost to about 51% in boro season. Fingerling nursing earned highest net returns among the three technologies.

Cathodic protection of aluminium sheathed wooden fishing boats with ternary aluminium anodes

Results of laboratory and field trials on cathodic protection of aluminium sheathing in fishing boats by ternary aluminium anodes are presented. The high negative potential of 1.06 V with respect to saturated calomel electrode, its appreciably low anodic polarization and high current output are favourable factors for using the ternary aluminium anodes. The low rate of consumption of the anode material under service trials attests its economic viability.

Experiments with fibre-glass sheathing as a protection against marine wood-boring organisms

Wooden test panels of different species of wood sheathed with fibre-glass reinforced plastic were subjected to immersion tests along with corresponding controls in Cochin Port area and the effect of the protective coating studied.

Cathodic protection of the hulls of fishing trawlers in India

Nearly 10,000 mechanised fishing trawlers mostly built of wood and about 100 trawlers built of steel besides a few fiberglass reinforced plastic and a couple of ferro-cement boats constitute the modern fishing fleet of India at present. Metallic corrosion in sea water is a very well-known phenomenon in all ships and various other marine structures; the exact financial loss and the material breakdowns have never been fully realized among the trawler owners in India. The Central Institute of Fisheries Technology at Cochin has been studying these problems for some years and has been able to assess the significance of underwater corrosion particularly of the hull below water line in the trawlers and suitable remedial measures have been suggested in this paper.

Problems associated with the over protection of fishing trawlers against sea water corrosion and fouling

Some presently used anti-fouling materials contain metals and other compounds, which are toxic in the environment. Coating products are not always stable, and there is a resulting pollution hazard. In particular if surfaces are poorly prepared and manufactures' instructions are not closely followed the application of anti-fouling substances becomes pointless and dangerous. In addition the salinity, constant biological activity and suspended particles make seawater a highly corrosive material in its own right.

On the development of a mercury-free ternary aluminium anode for cathodic protection

The development of a new mercury-free ternary aluminum anode (CIFTAL) for cathodic protection of marine structures is described. The new anode demonstrated a current efficiency of 83.5% to 85.4% in a current density range of 5.6 to 166.7 mAdmˉ². The current efficiency remained practically stable at 1.4 mAdmˉ² over a test period of 300 days. The service trials of the anode on steel trawlers and aluminum (Indal M 57 S) sheathed wooden boats have shown satisfactory performance in terms of uniform dissolution, current efficiency and driving voltage. In the wake of legislations restricting the use of anodes containing mercury in an endeavor to control the mercury pollution of the near shore aquatic environment, the new anode (CIFTAL) with its stable current output and high current efficiency merits significance in marine cathodic protection.

Fisheries profile mapping of coastal districts in Maharashtra state through GIS

In recent times, GIS is being increasingly used as a decision support system for management of fisheries and aquaculture. It provides new innovative approaches of the dynamic relations that characterize this sector. In this context, a study is conducted based on the secondary data of a major maritime state, Maharashtra, where mapping of fisheries profile of coastal districts in the state is performed through GIS tool having critical geographic dimensions. This paper aims to map information of the state which can be used for the purpose of planning and decision making as each aspect of map has a different component involved. For this purpose, at the core of the system, the data were accessed and integrated from different sources mainly from the five coastal districts of Maharashtra state. Data were brought in tabular form through Microsoft Excel and then joined to Map info Professional version 8.0 GIS software was used with the digitized map of Maharashtra state to enable mapping. This was further synchronized and integrated to generate four thematic maps searchable on several criteria. Map 1 contains the searchable criteria as regards to the fish growth for the year 1997-2004 and fish seed production for the year 2003-04. Map 2 contains fisher population along with their occupation for the year 1992. Map 3 contains brackish water and shrimp farming production and culture area. Map 4 contains infrastructural facilities which include type of boats etc. With this mapping, planners and various stakeholders have accessible information as regards to the various components of fisheries in the state of Maharashtra.

Integrated avalanche diode for 600 v Trench IGBT over-voltage protection

Avalanche multiplication has been one of the major destructive failure mechanisms in IGBTs; in order to avoid operating an IGBT under abnormal conditions, it is desirable to develop peripheral protecting circuits monolithically integrated without compromising the operation and performance of the IGBT. In this paper, a monolithically integrated avalanche diode (D av) for 600V Trench IGBT over-voltage protection is proposed. The mix-mode transient simulation proves the clamping capability of the D av when the IGBT is experiencing over-voltage stress in unclamped inductive switching (UIS) test. The spread of avalanche energy, which prevents hot-spot formation, through the help of the avalanche diode feeding back a large fraction of the avalanche current to a gate resistance (R G) is also explained. © 2011 IEEE.