Central America: management of used lubricants in Central America: final report

Includes bibliography

Assessment of Development Account Project 10/11 G. Improving the Management of Resources for the Environment in Latin America and the Caribbean

This draft final assessment report presents an assessment of the Development Account project “Improving the Management of Resources for the Environment in Latin America and the Caribbean”. commissioned by the Economic Commission for Latin America and the Caribbean (ECLAC). The report is made up of the following sections: Introduction, assessment management,findings and analysis. and lessons learnt, best practices and recommendations.

Aplicação de boro e maturadores na pré-colheita da cana-de-açúcar em início e final de safra

Pós-graduação em Agronomia (Agricultura) - FCA

Avaliação do gerenciamento e disposição final dos resíduos químicos de laboratórios do IGCE, UNESP - Rio Claro/SP

Laboratory of Chemical Waste Management programs are being implemented in various universities of the country and the world, in recognition of the urgent need to change the reality of disregard for the environment, together with objective responsibility of the generator, and especially the awareness of sustainability. Analysis and research laboratories involve a range of waste in developing their studies with intrinsic characteristics related to their form of generation. The amount of waste generated in this segment is negligible compared to industrial activities, but the environmental issue is that these residues do not have a standard technique for treatment due to the potential variation of its composition. This research project, aiming their suitability and continuous improvement, aims to diagnose and analyze the current situation of the management and disposal of chemical waste generated by the laboratories IGCE UNESP, Campus Rio Claro / SP. Universities, through their research, teaching and extension, end up generating potentially hazardous chemicals that may contaminate the environment when they are disposed of improperly, with no concern for the environment and / or public health. Aiming to assist in improvements with respect to this issue, the purpose of this study is to understand the management and disposal of chemical waste from the IGCE, laboratories UNESP - Rio Claro / SP, in order to discuss the situation of such waste, and present proposals to reduce generation of the same and minimizing the environmental impact, thereby increasing the local hygiene through proper disposal. The research instrument used interviews, questionnaires, review of recent literature and observations were made in order to develop proposals for the management and disposal of waste. These proposals based on prevention and corrective control, where the preventive approach aims at lifting techniques and actions to reduce the generating sources and...

Gestão de resíduos sólidos domiciliares orgânicos: práticas e técnicas para a destinação final na cidade de Rio Claro - SP

The present work is the analysis of the practices and techniques currently used in the final allocation given to organic household solid waste in the city of Rio Claro - SP. As the major part of Rio Claro’s household solid waste is formed by the organic fraction, as well as in the rest of the country, this research proposes a study on what is done with that portion of the waste, its treatment and where finally destined, based on the National Solid Waste Politic, recently approved in 2010. With the use of this organic part, for example: as animal feed supplement or compost embodiment for the purpose of producing organic fertilizer, enables the decrease of the percentage of the total destined to dumps and landfills. This total percentage has already been reduced after the popularization of the beneficial recycling programs in Brazil, which are still growing. As cities and the purchasing power of its individuals grow, there is also a consequent growth of waste production by society. The household whether domestic solid waste are lower than Industrial Solid ( RSI ) waste for the production in million tons ( Mton ) quantities , however, those residues are more visible on a daily basis - in cities and periphery as well, due to the inadequate management, - and also offer , as well as industrial and agricultural wastes , several types of harmful effects to the population when managed incorrectly. Therefore, the research aims to assist in the study of Solid Waste Management (MSW) for efficient Urban and Environmental Planning in a midsize city. Thus, this project aims to analyze in the city of Rio Claro, how the allocation of these materials is done and whether these practices denote effective improvement regarding the proper management of waste, in the same way that the recycling chain would allow this effect

Interdisciplinary project applied to engineering education: construction of a miniature ceramic industry

The greatest challenge of undergraduate engineering courses is to encourage creativity, cooperation with other students, teamwork, and motivation in the first years of their courses. While students have little or no contact with advanced disciplines, it is very difficult to attract their interests and encourage them to develop the skills in their undergraduate courses. This work aims to achieve these objectives through a mini-factory project involving the construction of a production line of ceramic tiles on a laboratory scale, from the ceramic processing using raw materials to the shipping of the final product. Having been given an established monthly demand for ceramic tiles, the students determined the construction requirements of the mini-factory, as they have created the layout, including the processing equipment, the dimensioning of equipment, and its operational structure. This article intends to describe the successful creation of the ceramic tile mini-factory, including the objectives, benefits, and inherent difficulties of the process and the receptivity of the exercise by the students involved.

Impact of the Internet on Final Year Students' Research: A Case Study of Covenant University, Ota, Nigeria

The 21st century is characterized by advancements in information and communication technology (ICT), including the Internet. Final year students of Covenant University implore the use of the Internet in writing their projects. This paper examines the extent of accessibility and use of the Internet by these students and the impact the Internet has on their projects. A questionnaire was used for data collection. A total of 150 questionaires were distributed to students from each of the three colleges in the university. The results show that all respondents used the Internet for their project work. Nearly all indicated that the Internet has an impact on their projects, especially in the areas of quality of work, speed, time economy, and recency of materials. Recommendations for improvement include provision of wireless Internet access points and training and retraining of students to acquire computer and Internet search skills.

Effect of implementing project-based education in high school physics : file folder bridge engineering

Project-based education and portfolio assessments are at the forefront of educational research. This research follows the implementation of a project-based unit in a high school physics class. Students played the role of an engineering firm who designed, built and tested file folder bridges. The purpose was to determine if projectbased learning could improve student attitude toward science and related careers like engineering. Teams of students presented their work in a portfolio for a final assessment of the process of designing, building and testing their bridges.

EVALUATION OF INTELLIGENT COMPACTION CONTROL IN THE M-189 RECONSTRUCTION PROJECT AT IRON RIVER, MICHIGAN

This research evaluated an Intelligent Compaction (IC) unit on the M-189 highway reconstruction project at Iron River, Michigan. The results from the IC unit were compared to several traditional compaction measurement devices including Nuclear Density Gauge (NDG), Geogauge, Light Weight Deflectometer (LWD), Dynamic Cone Penetrometer (DCP), and Modified Clegg Hammer (MCH). The research collected point measurements data on a test section in which 30 test locations on the final Class II sand base layer and the 22A gravel layer. These point measurements were compared with the IC measurements (ICMVs) on a point-to-point basis through a linear regression analysis. Poor correlations were obtained among different measurements points using simple regression analysis. When comparing the ICMV to the compaction measurements points. Factors attributing to the weak correlation include soil heterogeneity, variation in IC roller operation parameters, in-place moisture content, the narrow range of the compaction devices measurement ranges and support conditions of the support layers. After incorporating some of the affecting factors into a multiple regression analysis, the strength of correlation significantly improved, especially on the stiffer gravel layer. Measurements were also studied from an overall distribution perspective in terms of average, measurement range, standard deviation, and coefficient of variance. Based on data analysis, on-site project observation and literature review, conclusions were made on how IC performed in regards to compaction control on the M-189 reconstruction project.

Batch scheduling in process industries: an application of resource-constrained project scheduling

The paper deals with batch scheduling problems in process industries where final products arise from several successive chemical or physical transformations of raw materials using multi–purpose equipment. In batch production mode, the total requirements of intermediate and final products are partitioned into batches. The production start of a batch at a given level requires the availability of all input products. We consider the problem of scheduling the production of given batches such that the makespan is minimized. Constraints like minimum and maximum time lags between successive production levels, sequence–dependent facility setup times, finite intermediate storages, production breaks, and time–varying manpower contribute to the complexity of this problem. We propose a new solution approach using models and methods of resource–constrained project scheduling, which (approximately) solves problems of industrial size within a reasonable amount of time.

Capacity building in the use of geospatial tools for natural resource management in Tajikistan: Final Report

The Swiss Swiss Consultant Trust Fund (CTF) support covered the period from July to December 2007 and comprised four main tasks: (1) Analysis of historic land degradation trends in the four watersheds of Zerafshan, Surkhob, Toirsu, and Vanj; (2) Translation of standard CDE GIS training materials into Russian and Tajik to enable local government staff and other specialists to use geospatial data and tools; (3) Demonstration of geospatial tools that show land degradation trends associated with land use and vegetative cover data in the project areas, (4) Preliminary training of government staff in using appropriate data, including existing information, global datasets, inexpensive satellite imagery and other datasets and webbased visualization tools like spatial data viewers, etc. The project allowed building of local awareness of, and skills in, up-to-date, inexpensive, easy-to-use GIS technologies, data sources, and applications relevant to natural resource management and especially to sustainable land management. In addition to supporting the implementation of the World Bank technical assistance activity to build capacity in the use of geospatial tools for natural resource management, the Swiss CTF support also aimed at complementing the Bank supervision work on the ongoing Community Agriculture and Watershed Management Project (CAWMP).

Capacity building in the use of geospatial tools for natural resource management in Tajikistan: Inception report BNWPP project

The Centre for Development and Environment (CDE) has been contracted by the World Bank Group to conduct a program on capacity development in use of geospatial tools for natural resource management in Tajikistan. The program aimed to help improving natural resource management by fostering the use of geospatial tools among governmental and non-governmental institutions in Tajikistan. For this purpose a database including a Geographic Information System (GIS) has been prepared, which combines spatial data on various sectors for case study analysis related to the Community Agriculture and Watershed Management Project (CAWMP). The inception report is based on the findings resulting from the Swiss Consultant Trust Fund (CTF) financed project, specifically on the experiences from the awareness creation and training workshop conducted in Dushanbe in November 2007 and the analysis of historical land degradation trends carried out for the four CAWMP watersheds. Furthermore, also recommendations from the inception mission of CDE to Tajikistan (5-20 August 2007) and the inception report for the Swiss CTF support were considered. The inception report for the BNWPP project (The Bank-Netherlands Water Partnership Program) discusses the following project relevant issues: (1) Preliminary list of additional data layers, types of data analysis, and audiences to be covered by BNWPP grant (2) Assessing skills and equipment already available within Tajikistan, and implications for training program and specific equipment procurement plans (3) Updated detailed schedule and plans for all activities to be financed by BNWPP grant, and (4) Proposed list of contents for the final report and web-based presentations.

Tab. 1 Mole % CO2 and 13C values of CO2 at baseline and at the final monitoring event for the eight observation wells

During CO2 storage operations in mature oilfields or saline aquifers it is desirable to trace the movement of injected CO2 for verification and safety purposes. We demonstrate the successful use of carbon isotope abundance ratios for tracing the movement of CO2 injected at the Cardium CO2 Storage Monitoring project in Alberta between 2005 and 2007. Injected CO2 had a d13C value of -4.6±1.1 per mil that was more than 10 per mil higher than the carbon isotope ratios of casing gas CO2 prior to CO2 injection with average d13C values ranging from -15.9 to -23.5 per mil. After commencement of CO2 injection, d13C values of casing gas CO2 increased in all observation wells towards those of the injected CO2 consistent with a two-source end-member mixing model. At four wells located in a NE-SW trend with respect to the injection wells, breakthrough of injected CO2 was registered chemically (>50 mol % CO2) and isotopically 1-6 months after commencement of CO2 injection resulting in cumulative CO2 fluxes exceeding 100000 m**3 during the observation period. At four other wells, casing gas CO2 contents remained below 5 mol % resulting in low cumulative CO2 fluxes (<2000 m**3) throughout the entire observation period, but carbon isotope ratios indicated contributions between <30 and 80% of injected CO2. Therefore, we conclude that monitoring the movement of CO2 in the injection reservoir with geochemical and isotopic techniques is an effective approach to determine plume expansion and to identify potential preferential flow paths provided that the isotopic composition of injected CO2 is constant and distinct from that of baseline CO2.

Abundance of mesozooplankton in the western part of the Black Sea in summer 2005 during Phase 2: Leg1 from the GEF Project

The sampling area was extended to the Western-South area off the Black Sea coast from Kaliakra cape toward the Bosforous. Samples were collected along four transects. The whole dataset is composed of 17 samples (from 10 stations) with data of mesozooplankton species composition abundance and biomass. Sampling for zooplankton was performed from bottom up to the surface at depths depending on water column stratification and the thermocline depth. These data are organized in the "Control of eutrophication, hazardous substances and related measures for rehabilitating the Black Sea ecosystem: Phase 2: Leg I: PIMS 3065". Data Report is not published. Zooplankton samples were collected with vertical closing Juday net,diameter - 36cm, mesh size 150 µm. Tows were performed from surface down to bottom meters depths in discrete layers. Samples were preserved by a 4% formaldehyde sea water buffered solution. Sampling volume was estimated by multiplying the mouth area with the wire length. Mesozooplankton abundance: The collected material was analysed using the method of Domov (1959). Samples were brought to volume of 25-30 ml depending upon zooplankton density and mixed intensively until all organisms were distributed randomly in the sample volume. After that 5 ml of sample was taken and poured in the counting chamber which is a rectangle form for taxomomic identification and count. Large (> 1 mm body length) and not abundant species were calculated in whole sample. Counting and measuring of organisms were made in the Dimov chamber under the stereomicroscope to the lowest taxon possible. Taxonomic identification was done at the Institute of Oceanology by Kremena Stefanova using the relevant taxonomic literature (Mordukhay-Boltovskoy, F.D. (Ed.). 1968, 1969,1972). Taxon-specific abundance: The collected material was analysed using the method of Domov (1959). Samples were brought to volume of 25-30 ml depending upon zooplankton density and mixed intensively until all organisms were distributed randomly in the sample volume. After that 5 ml of sample was taken and poured in the counting chamber which is a rectangle form for taxomomic identification and count. Copepods and Cladoceras were identified and enumerated; the other mesozooplankters were identified and enumerated at higher taxonomic level (commonly named as mesozooplankton groups). Large (> 1 mm body length) and not abundant species were calculated in whole sample. Counting and measuring of organisms were made in the Dimov chamber under the stereomicroscope to the lowest taxon possible. Taxonomic identification was done at the Institute of Oceanology by Kremena Stefanova using the relevant taxonomic literature (Mordukhay-Boltovskoy, F.D. (Ed.). 1968, 1969,1972).