Evaluate the efficiency of hydrogen peroxide and levaemisole hydrochloride in the treatment of Persian sturgeon, Chinese carp eggs and juveniles

During a two years research hydrogen peroxide efficacy evaluated for Persian sturgeon, Chinese carps and common carp eggs. These series of the experiments conducted in various conditions different concentration of hydrogen peroxide include 250, 500, 750, 1,000 1,500 2,000 3,000 and 9,000 PPM used as ten and fifteen minutes baths, compared with Malachite green and natural control . In the next phase effect of Levaemisole hydrochloride as an immunostimulator which applied as 5 mg/I in twenty minutes baths from day sixth after hatch evaluated by daily mortality rate and leukocytes counts. The results shown that according fertilization percent and temperature condition hydrogen peroxide at 1,000 and 1,500 PPM concentrations is a effective antifungal agent during incubation periods of Persian sturgeon and even sometimes increasing hatching rates significantly comparing with natural controls and Malachite green. In Chinese carps although hydrogen peroxide controls water molds but it is not recommended in high temperatures because it make shortened incubation time and mold infections will decrease. Also the results shown 750 PPM concentration of hydrogen peroxide in common carp eggs controls water moulds infections and increase hatching rate significantly comparing with Malachite green and natural control. Daily mortality rates accessing of Persian sturgeon fries show that 20 minutes baths of 5mg/1 levamisole hydrochloride decreases daily mortality rate during yolk sac absorption. Nitrogenous compounds: nitrate and ammonium differ significantly between treated tanks with control. Blood leucocytes concentrations as an immune index was different significantly in treated fishes by levamisole hydrochloride comparing with controls. In Chinese carps because yolks sac absorption time is short there is not necessary to use the levamisole hydrochloride. Although treated larvae were more active than controls. As a result our suggestions is to use hydrogen peroxide in Persian sturgeon and common carp artificial propagation and also suggest the use levamisole hydrochloride for Persian sturgeon beside management method in stress and pollution condition

The study and production of fish sauce from Caspian Sea lam fish with traditional fermentation method and microbe and enzyme adding method and identification of important bacteria

Fish sauce is a popular fermented product used in south Asian countries which is made from different small fishes in this research work it was attempted to produce fish sauce from kilka of the Caspian sea, the fish sauce was made from three models of kilka ,such as whole kilka , cooked whole kilka and dressed kilka , each of these models treated it four different fashions of fermentation such as:1- Traditional method, 2- Enzymatic method 3- Microbial method, 4- Mixture of enzyme and microb The results of this investigation showed that time of fermentation for the traditional method was six month, enzymatic method one month, microbial method 3 month and the mixture of enzyme and microb 1 month. The rate of fermentation was least for dressed Kilka, microbial and biochemical changes of Kilka fish sauce were evaluated, total bacterial count was 2.1-6.15 log cfu/ml total volatile nitrogen (TVN) in samples recorded was 250 mg /100g, the amount of protein varied between 10-13 percent, the name of commercial enzymes added was Protamex and Flavourzyme, the bacteria added was L act ob acillus and Pediococous, fish sauce containers fish and 20% salt, temperature of keeping for fermentation was 37 degree c for 6 month.

Data-based robust multiobjective optimization of interconnected processes: energy efficiency case study in papermaking.

Reducing energy consumption is a major challenge for "energy-intensive" industries such as papermaking. A commercially viable energy saving solution is to employ data-based optimization techniques to obtain a set of "optimized" operational settings that satisfy certain performance indices. The difficulties of this are: 1) the problems of this type are inherently multicriteria in the sense that improving one performance index might result in compromising the other important measures; 2) practical systems often exhibit unknown complex dynamics and several interconnections which make the modeling task difficult; and 3) as the models are acquired from the existing historical data, they are valid only locally and extrapolations incorporate risk of increasing process variability. To overcome these difficulties, this paper presents a new decision support system for robust multiobjective optimization of interconnected processes. The plant is first divided into serially connected units to model the process, product quality, energy consumption, and corresponding uncertainty measures. Then multiobjective gradient descent algorithm is used to solve the problem in line with user's preference information. Finally, the optimization results are visualized for analysis and decision making. In practice, if further iterations of the optimization algorithm are considered, validity of the local models must be checked prior to proceeding to further iterations. The method is implemented by a MATLAB-based interactive tool DataExplorer supporting a range of data analysis, modeling, and multiobjective optimization techniques. The proposed approach was tested in two U.K.-based commercial paper mills where the aim was reducing steam consumption and increasing productivity while maintaining the product quality by optimization of vacuum pressures in forming and press sections. The experimental results demonstrate the effectiveness of the method.

High efficiency liquid crystal lasers giving "white light" emission from arrays and flexible substrates

The self-organization of the helical structure of chiral nematic liquid crystals combined with their sensitivity to electric fields makes them particularly interesting for low-threshold, wavelength tunable laser devices. We have studied these organic lasers in detail, ranging from the influence specific macroscopic properties, such as birefringence and order parameter, have on the output characteristics, to practical systems in the form of two-dimensional arrays, double-pass geometries and paintable lasers. Furthermore, even though chiral nematics are responsive to electric fields there is no facile means by which the helix periodicity can be adjusted, thereby allowing laser wavelength tuning, without adversely affecting the optical quality of the resonator. Therefore, in addition to studying the liquid crystal lasers, we have focused on finding a novel method with which to alter the periodicity of a chiral nematic using electric fields without inducing defects and degrading the optical quality factor of the resonator. This paper presents an overview of our research, describing (i) the correlation between laser output and material properties,(ii) the importance of the gain medium,(iii) multicolor laser arrays, and (iv) high slope efficiency (>60%) silicon back-plane devices. Overall we conclude that these materials have great potential for use in versatile organic laser systems.

Energy efficiency, resilience to future climates and long-term sustainability: the role of the built environment

Just under half of all energy consumption in the UK today takes place indoors, and over a quarter within our homes. The challenges associated with energy security, climate change and sustainable consumption will be overcome or lost in existing buildings. A background analysis, and the scale of the engineering challenge for the next three to four decades, is described in this paper.

Energy efficiency, resilience to future climates and long-term sustainability: the role of the built environment.

Just under half of all energy consumption in the UK today takes place indoors, and over a quarter within our homes. The challenges associated with energy security, climate change and sustainable consumption will be overcome or lost in our existing buildings. A background analysis, and the scale of the engineering challenge for the next three to four decades, is described in this paper.

Data-based robust multiobjective optimization of interconnected processes: Energy efficiency case study in papermaking

Reducing energy consumption is a major challenge for energy-intensive industries such as papermaking. A commercially viable energy saving solution is to employ data-based optimization techniques to obtain a set of optimized operational settings that satisfy certain performance indices. The difficulties of this are: 1) the problems of this type are inherently multicriteria in the sense that improving one performance index might result in compromising the other important measures; 2) practical systems often exhibit unknown complex dynamics and several interconnections which make the modeling task difficult; and 3) as the models are acquired from the existing historical data, they are valid only locally and extrapolations incorporate risk of increasing process variability. To overcome these difficulties, this paper presents a new decision support system for robust multiobjective optimization of interconnected processes. The plant is first divided into serially connected units to model the process, product quality, energy consumption, and corresponding uncertainty measures. Then multiobjective gradient descent algorithm is used to solve the problem in line with user's preference information. Finally, the optimization results are visualized for analysis and decision making. In practice, if further iterations of the optimization algorithm are considered, validity of the local models must be checked prior to proceeding to further iterations. The method is implemented by a MATLAB-based interactive tool DataExplorer supporting a range of data analysis, modeling, and multiobjective optimization techniques. The proposed approach was tested in two U.K.-based commercial paper mills where the aim was reducing steam consumption and increasing productivity while maintaining the product quality by optimization of vacuum pressures in forming and press sections. The experimental results demonstrate the effectiveness of the method. © 2006 IEEE.

High-efficiency InGaN/GaN quantum well structures on large area silicon substrates

The growth techniques which have enabled the realization of InGaN-based multi-quantum-well (MQW) structures with high internal quantum efficiencies (IQE) on 150mm (6-in.) silicon substrates are reviewed. InGaN/GaN MQWs are deposited onto GaN templates on large-area (111) silicon substrates, using AlGaN strain-mediating interlayers to inhibit thermal-induced cracking and wafer-bowing, and using a SiN x interlayer to reduce threading dislocation densities in the active region of the MQW structure. MQWs with high IQE approaching 60% have been demonstrated. Atomic resolution electron microscopy and EELS analysis have been used to study the nature of the important interface between the Si(111) substrate and the AlN nucleation layer. We demonstrate an amorphous SiN x interlayer at the interface about 2nm wide, which does not, however, prevent good epitaxy of the AlN on the Si(111) substrate. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Progress in ultra-high modulation efficiency tapered lasers for free-space communications

Simultaneous high power (2W), high modulation speed (1Gb/s) and high modulation efficiency (14 W/A) operation of a two-electrode tapered laser is reported. © 2011 IEEE.

Improved energy efficiency in paper making through reducing dryer steam consumption using advanced process control

Over the last two or three years, the increasing costs of energy and worsening market conditions have focussed even greater attention within paper mills than before, on considering ways to improve efficiency and reduce the energy used in paper making. Arising from a multivariable understanding of paper machine operation, Advanced Process Control (APC) technology enables paper machine behaviour to be controlled in a more coherent way, using all the variables available for control. Furthermore, with the machine under better regulation and with more variables used in control, there is the opportunity to optimise machine operation, usually providing very striking multi-objective performance improvement benefits of a number of kinds. Traditional three term control technology does not offer this capability. The paper presents results from several different paper machine projects we have undertaken around the world. These projects have been aimed at improving machine stability, optimising chemicals usage and reducing energy use. On a brown paperboard machine in Australasia, APC has reduced specific steam usage by 10%, averaged across the grades; the controller has also provided a significant capacity to increase production. On a North American newsprint machine, the APC system has reduced steam usage by more than 10%, and it provides better control of colour and much improved wet end stability. The paper also outlines early results from two other performance improvement projects, each incorporating a different approach to reducing the energy used in paper making. The first of these two projects is focussed on optimising sheet drainage, aiming to present the dryer with a sheet having higher solids content than before. The second project aims to reduce specific steam usage by optimising the operation of the dryer hood.