The BACOMA cod-end. History and recent developments in BACOMA cod-end regulations and a proposal for abetter specification of the BACOMA cod-end for Baltic Sea cod fishery

To improve the cod stocks in the Baltic Sea, a number of regulations have recently been established by the International Baltic Sea Fisheries Commission (IBSFC) and the European Commission. According to these, fishermen are obliged to use nets with escape windows (BACOMA nets) with a mesh size of the escape window of 120 mm until end of September 2003. These nets however, retain only fish much larger than the legal minimum landing size would al-low. Due to the present stock structure only few of such large fish are however existent. As a consequence fishermen use a legal alternative net. This is a conventional trawl with a cod-end of 130 mm diamond-shaped meshes (IBSFC-rules of 1st April 2002), to be increased to 140 mm on 1st September 2003, according to the mentioned IBSFC-rule. Due legal alterations of the net by the fishermen (e.g. use of extra stiff net material) these nets have acquired extremely low selective properties, i. e. they catch very small fish and produce great amounts of discards. Due to the increase of the minimum landing size from 35 to 38 cm for cod in the Baltic, the amount of discards has even increased since the beginning of 2003. Experiments have now been carried out with the BACOMAnet on German and Swedish commercial and research vessels since arguments were brought forward that the BACOMA net was not yet sufficiently tested on commercial vessels. The results of all experiments conducted so far, are compiled and evaluated here. As a result of the Swedish, Danish and German initiative and research the European Commission reacted upon this in June 2003 and rejected the increase of the diamond-meshed non-BACOMA net from 130 mm to 140mm in September 2003. To protect the cod stocks in the Baltic Sea more effectively the use of traditional diamond meshed cod-ends with-out escape window are prohibited in community waters without derogation, becoming effective 1st of September 2003. To enable more effective and simplified control of the bottom trawl fishery in the Baltic Sea the principle of a ”One-Net-Rule“ is enforced. This is going to be the BACOMA net, with the meshes of the escape window being 110 mm for the time being. The description of the BACOMA net as given in the IBSFC-rules no.10 (revision of the 28th session, Berlin 2002) concentrates on the cod-end and the escape window but only to a less extent on the design and mesh-composition of the remaining parts of the net, such as belly and funnel and many details. Thus, the present description is not complete and leaves, according to fishermen, ample opportunity for manipulation. An initiative has been started in Germany with joint effort from scientists and the fishery to better describe the entire net and to produce a proposal for a more comprehensive description, leaving less space for manipulation. A proposal in this direction is given here and shall be seen as a starting point for a discussion and development towards an internationally uniform net, which is agreed amongst the fishery, scientists and politicians. The Baltic Sea fishery is invited to comment on this proposal, and recommendations for further improvement and specifications are welcomed. Once the design is agreed by the Baltic Fishermen Association, it shall be proposed to the IBSFC and European Commission via the Baltic Fishermen Association.

Potential Application of Adsorptive Media to Enhance Phosphorus Uptake in Stormwater Basins and Wetlands at Lake Tahoe : literature review. Report to the University of California Davis Tahoe Research Group

Phosphorus removal by wetlands and basins in Lake Tahoe may be improved through designing these systems to filter storm water through media having higher phosphorus removal capabilities than local parent material. Substrates rich in iron, aluminum and calcium oftentimes have enhanced phosphorus removal. These substrates can be naturally occurring, byproducts of industrial or water treatment processes, or engineered. Phosphorus removal fundamentally occurs through chemical adsorption and/or precipitation and much of the phosphorus can be irreversibly bound. In addition to these standard media, other engineered substrates are available to enhance P removal. One such substrate is locally available in Reno and uses lanthanum coated diatomaceous earth for arsenate removal. This material, which has a high positive surface charge, can also irreversibly remove phosphorus. Physical factors also affect P removal. Specifically, specific surface area and particle shape affect filtration capacity, contact area between water and the surface area, and likelihood of clogging and blinding. A number of substrates have been shown to effectively remove P in case studies. Based upon these studies, promising substrates include WTRs, blast furnace slag, steel furnace slag, OPC, calcite, marble Utelite and other LWAs, zeolite and shale. However, other nonperformance factors such as environmental considerations, application logistics, costs, and potential for cementification narrow the list of possible media for application at Tahoe. Industrial byproducts such as slags risk possible leaching of heavy metals and this potential cannot be easily predicted. Fly ash and other fine particle substrates would be more difficult to apply because they would need to be blended, making them less desirable and more costly to apply than larger diameter media. High transportation costs rule out non-local products. Finally, amorphous calcium products will eventually cementify reducing their effectiveness in filtration systems. Based upon these considerations, bauxite, LWAs and expanded shales/clays, iron-rich sands, activated alumina, marble and dolomite, and natural and lanthanum activated diatomaceous earth are the products most likely to be tested for application at Tahoe. These materials are typically iron, calcium or aluminum based; many have a high specific surface area; and all have low transportation costs. (PDF contains 21 pages)

The past history and present trends in the fisheries of Lake Chad

Lake Chad is a very large, shallow eutrophic lake shared by Chad, Nigeria, Niger and Cameroun. It supplies approximately 13% of Nigeria's inland fish. It however lies in an unstable ecological environment characterised by intermittent period of rainfall and drought. This creates a very large draw down area. Consequently, the fisheries are affected by the oscillation in the size of lake due to the drought. Other factors affecting the volume of water are the numerous dams on the inflow rivers. The fishery is also subjected to intense overfishing and may be affected by pollution and other land use practices. The paper discusses changes that took place over the years as a result of the factors of drought, effect of dams on the inflow rivers. The fishery is also subjected to intense overfishing and may be affected by pollution and other land use practices. The paper discusses changes that took place over the years as a result of the factors of drought, effects of dams and overexploitation. Previous records of fish production, species composition and distribution, the status of the fish stocks, their sizes are compared with more recent data. The status of the fishery before and after the contraction of the lake is discussed. Suggestion for a national exploitation of the lake based on habitat improvement, increasing the volume of the water in the lake through controlled use of the influent rivers as well as reduction in overfishing are made

A review of IATTC research on the early life history and reproductive biology of scombrids conducted at the Achotines Laboratory from 1985 to 2005

English: For nearly a century, fisheries scientists have studied marine fish stocks in an effort to understand how the abundances of fish populations are determined. During the early lives of marine fishes, survival is variable, and the numbers of individuals surviving to transitional stages or recruitment are difficult to predict. The egg, larval, and juvenile stages of marine fishes are characterized by high rates of mortality and growth. Most marine fishes, particularly pelagic species, are highly fecund, produce small eggs and larvae, and feed and grow in complex aquatic ecosystems. The identification of environmental or biological factors that are most important in controlling survival during the early life stages of marine fishes is a potentially powerful tool in stock assessment. Because vital rates (mortality and growth) during the early life stages of marine fishes are high and variable, small changes in those rates can have profound effects on the properties of survivors and recruitment potential (Houde 1989). Understanding and predicting the factors that most strongly influence pre-recruit survival are key goals of fisheries research programs. Spanish: Desde hace casi un siglo, los científicos pesqueros han estudiado las poblaciones de peces marinos en un intento por entender cómo se determina la abundancia de las mismas. Durante la vida temprana de los peces marinos, la supervivencia es variable, y el número de individuos que sobrevive hasta las etapas transicionales o el reclutamiento es difícil de predecir. Las etapas de huevo, larval, y juvenil de los peces marinos son caracterizadas por tasas altas de mortalidad y crecimiento. La mayoría de los peces marinos, particularmente las especies pelágicas, son muy fecundos, producen huevos y larvas pequeños, y se alimentan y crecen en ecosistemas acuáticos complejos. La identificación los factores ambientales o biológicos más importantes en el control de la supervivencia durante las etapas tempranas de vida de los peces marinos es una herramienta potencialmente potente en la evaluación de las poblaciones. Ya que las tasas vitales (mortalidad y crecimiento) durante las etapas tempranas de vida de los peces marinos son altas y variables, cambios pequeños en esas tasas pueden ejercer efectos importantes sobre las propiedades de los supervivientes y el potencial de reclutamiento (Houde 1989). Comprender y predecir los factores que más afectan la supervivencia antes del reclutamiento son objetivos clave de los programas de investigación pesquera.

The significance of scale patterns and scale readings in the life history and habits of the salmon

This brief reports highlights the significance of scale readings of salmon. The reasons for colour change of scales and scale rings are briefly explained. Scale readings of salmon fry from the River Lune in the north west of England are presented. The salmon was captured in 1957/58.

Homarid Lobster Hatcheries: Their History and Role in Research, Management, and Aquaculture

This paper provides an historical review of homarid lobster fisheries, the development and usage of lobster hatcheries, and much of the research influenced by hatchery-initiated studies on natural history, physiology, and morphological development of the lobster, Homarus spp. Few commercial lobster hatcheries exist in the world today, yet their potential usage in restocking efforts in various countries is constantly being reexamined, particularly when natural stocks are considered “overfished.” Furthermore, many individual researchers working on homarid lobsters use smallscale hatchery operations to provide the animals necessary for their work as well as animals reared and provided by various governmental agencies interested in specific projects on larvae, postlarvae, or juveniles. Such researchers can benefi t from the information in this review and can avoid many pitfalls previously documented. The development of hatcheries and the experimental studies that were generated from their activities have had a direct impact on much of the research on lobsters. The past work arising from hatchery operations—descriptions of life stages, behavior, physiology, etc.—has generally been confirmed rather than refuted and has stimulated further research important for an understanding of the life history of homarid lobsters. The connections between homarid fisheries and hatchery operations (i.e. culturing of the lobsters), whether small- or large-scale for field and laboratory research, are important to understand so that better tools for fishery management can be developed. This review tries to provide such connections. However, the rearing techniques in use in today’s hatcheries—most of which are relics from the past—are clearly not effi cient enough for large-scale commercial aquaculture of lobsters or even for current restocking efforts practiced by several countries today. If hatcheries are to be used to supplement homarid stocks, to restock areas that were overfished, or to reintroduce species into their historical ranges, there is a clear need to further develop culture techniques. This review should help in assessments of culturing techniques for Homarus spp. and provide a reference source for researchers or governmental agencies wishing to avoid repeating previous mistakes.

Life history and production of Capitella capitata (Polychaeta: Capitellidae) in Río de la Plata Estuary (Argentina)

A benthic survey was carried out from November 1998 to December 1999 in the tidal flats of Bahía Samborombón (Río de la Plata estuary, Argentina), in order to study the population structure, reproductive aspects, growth and secondary production of Capitella capitata (Fabricius, 1780). Growth was analyzed using ELEFAN routine, and the secondary production was estimated by Hynes and Coleman's method (1968). C. capitata did not present periods of very important recruitments throughout the year; however, the abundance of smallest size classes was higher during summer and autumn. The summer cohort showed a growth rate (K) of 2.05 and a seasonal growth oscillation (C) of 0.6, pointing out that worms grew very slowly during winter months. The life span of this cohort was 13 months. The autumn cohort showed a lower growth rate (K= 1.5) and its growth was lowest during winter. The life span was 15 months for this cohort. C. capitata in Punta Rasa presented an extended reproductive period, with absence of activity during winter months. The type of eggs and larvae suggest that C. capitata has benthic larval development in the study area, destining its reproductive effort to the production of a low number of eggs, and assuring larvae survival through incubation in brooding tubes. The annual mean biomass in Punta Rasa was 0.117 g m-2 (AFDW), with a mean secondary production of 0.23 g m-2 y-1 and a P/B ratio of 1.96 y-1. The relatively low density, biomass production and P/B ratio of C. capitata in Punta Rasa can be considered as reference values for this species inhabiting undisturbed or moderately disturbed areas.