Diagnóstico das áreas de preservação permanente na bacia hidrográfica do rio Tijuco, Ituiutaba - MG, utilizando tecnologia SIG

The present work had the objective to elaborate the map of land use and vegetation covering from Tijuco river watershed, Ituiutaba-MG, based on digital images obtained by satellite from CBERS 2, through automatic delimitation of permanent preservation areas followed by identification of land use conflict based on the Brazilian Forest Code (Law no 4771/1965) and National Council of Environment's Resolution no 303/02. This paper analyzes, through quantitative parameters and the use of Geographic Information System, the maintenance tracks of width recommended by the legislation for permanent preservation areas over water bodies. The results showed a deficit of conserved areas along the riverbanks of 2334 ha that are not in compliance with the legislation. The pasture occupies unduly 0.97% of the area of the basin in the permanent preservation areas at the riverbanks, while agriculture occupies 0.38%.

Dielectric tunability in (1-x)[Pb(Mg 1/3Nb 2/3)O 3]-xPbTiO 3 ceramics for tunable devices application

The dielectric properties of the 0.65[Pb(Mg 1/3Nb 2/3)O 3]-0.35PbTiO 3 ferroelectric ceramic composition were investigated viewing the capability to be used for tunable microwave applications. The dielectric response has been studied for three selected temperatures (300 K, 370 K and 400 K), below the paraelectric- ferroelectric phase transition temperature, as a function of the applied 'bias' electric field. The obtained dielectric tunability was found to be around 60 %, under an electric field of 19 kV/cm, which makes the studied ceramic composition an excellent candidate for application in the electro-electronic industry, as tunable devices. © 2010 IEEE.

High-yield direct synthesis of Mg 2FeH 6 from the elements by reactive milling

Magnesium complex hydrides as Mg 2FeH 6 are interesting phases for hydrogen storage in the solid state, mainly due to its high gravimetric and volumetric densities of H2. However, the synthesis of this hydride is not trivial because the intermetallic phase Mg2Fe does not exist and Mg and Fe are virtually immiscible under equilibrium conditions. In this study, we have systematically studied the influence of the most important processing parameters in reactive milling under hydrogen (RM) for Mg 2FeH 6 synthesis: milling time, ball-to-powder weight ratio (BPR), hydrogen pressure and type of mill. Low cost 2Mg-Fe mixtures were used as raw materials. An important control of the Mg 2FeH 6 direct synthesis by RM was attained. In optimized combinations of the processing parameters, very high proportions of the complex hydride could be obtained. © (2011) Trans Tech Publications.

Nacimientos evitados por la DEPO-PROVERA 300 mg

Incluye Bibliografía

Geotermobarometria de Granulitos Associados à Supracrustais na Porção Norte do Complexo Guaxupé - Região de Arceburgo - Santa Cruz do Prata, MG

This paper is a contribution for the understanding of the geological evolution of Guaxupé Complex. New data on petrography and mineral chemistry as well as estimates of metamorphic (P-T) conditions in the region of Arceburgo - Santa Cruz do Prata (MG) Brazil, at the southern portion of the Brasília Belt, more specifically at the Guaxupé Complex (Domain) are now presented. The lithotypes are high-grade metamorphic rocks subdivided into two groups: metasediments and granulites (orthoderivates). Chemical analysis of minerals was performed in three steps including core and rim of amphibole, pyroxene, feldspar, biotite, and garnet from samples of the following rock types: enderbites, mafic granulites, charnockites, and alkali feldspar charnockites. Results obtained with geothermobarometric calculations show metamorphic peak around 900°C of T and 10 kbar of P. Enderbites and tonalite granulites (mafic) show the highest values of temperature and pressure, while alkali feldspar charnockites show the lowest probably due to their late generation in relation to mafic rock types (enderbites and mafic tonalite granulite). Chemical mineral analysis in metamorphic parageneses and geothermobarometric calculations indicate that the possible metamorphic peak may be higher than 900°C of temperature and around 10 kbar of pressure, within a isothermal decompression (ITD) regime.

Relação do meio físico com o manejo sustentável de plantio de eucalipto em áreas de terrenos acidentados - A Fazenda Santa Edwirges, Vale do Paraíba, Sudeste do Brasil

This study intends to evaluate the effects of landscape physical elements (rocks and relief) associated with silviculture activities. The study was carried out on a small farm (Fazenda Santa Edwirges) covered by Eucalyptus forested situated in the Paraiba do Sul Basin, Southeast Brazil. The methodology consisted of detailed geological and geomorphological studies at 1:10,000 scale, and laboratory analysis of soil physical properties. The results showed three geologic-geomorphologic associations (ridge escarpment with granitic rocks, steep and gentle hills cut by shear zones and gentle hill with alluvial sediments) present high vulnerability for the development of the physical processes such as accelerated erosion landslides and flooding. In contrast, mountains associated with gneissic rocks present smaller vulnerability and high resilience for the development of the physical processes. The results have showed the importance of considering the interactions among landscape physical for the eucalyptus forest management contributing to a better selection area for eucalyptus cultivation and minimize adverse environment impact in road design.

Determination of Mg (II) in biodiesel by adsorptive stripping voltammetry at a mercury film electrode in the presence of sodium thiopentone

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Florística e fitossociologia em áreas de campo sujo e cerrado sensu stricto na Estação Ecológica de Pirapitinga-MG

The objectives of this study were to characterize the floristic and to calculate the phytosociological parameters of species present in the areas of 'campo sujo' and 'cerrado' sensu stricto in the Ecological Station of Pirapitinga, Minas Gerais state (ESEC). For the floristic and phytosociologic survey, a total of 190 plots of 100 m2 each were allocated, where all the individuals with circumference at soil level (CSL) ≥ 16 cm in areas of 'campo sujo' and 'cerrado' sensu stricto were sampled. The parameters of frequency, density, dominance, and importance values and Shannon and Pielou indexes were calculated. The floristic similarity between areas was determinated by Sorensen index. In the study areas, a total of 3,224 individuals distributed in 81 species, 70 genera and 40 families were sampled. The richest families were Vochysiaceae and Fabaceae. The cerrado sensu stricto was the vegetal formation with the highest richness of species (81) and highest density (2.257 ind ha-1). Both areas have studied with high diversity and ecological dominance and have low diameter distribution in the form of inverted-J, indicating the predominance of young individuals.

Corrosion and tribocorrosion behaviour of Al-Si-Cu-Mg alloy and its composites reinforced with B4C particles in 0.05M NaCl solution

The corrosion behaviour of metal matrix composites (MMCs) is strictly linked with the presence of heterogeneities such as reinforcement phase, microcrevices, porosity, secondary phase precipitates, and interaction products. Most of the literature related to corrosion behaviour of aluminium matrix composites (AMCs) is focused on SiC reinforced AMCs. On the other hand, there is very limited information available in the literature related to the tribocorrosion behaviour of AMCs. Therefore, the present work aims to investigate corrosion and tribocorrosion behaviour of Al-Si-Cu-Mg alloy matrix composites reinforced with B4C particulates. Corrosion behaviour of 15 and 19% (vol) B4C reinforced Al-Si-Cu-Mg matrix composites and the base alloy was investigated in 0.05M NaCl solution by performing immersion tests and potentiodynamic polarisation tests. Tribocorrosion behaviour of Al-Si-Cu-Mg alloy and its composites were also investigated in 0.05M NaCl solution. The tests were carried out against alumina ball using a reciprocating ball-on-plate tribometer. Electrochemical measurements were performed before, during, and after the sliding tests together with the recording of the tangential force. Results suggest that particle addition did not affect significantly the tendency of corrosion of Al-Si-Cu-Mg alloy without mechanical interactions. During the tribocorrosion tests, the counter material was found to slide mainly on the B4C particles, which protected the matrix alloy from severe wear damage. Furthermore, the wear debris were accumulated on the worn surfaces and entrapped between the reinforcing particles. Therefore, the tendency of corrosion and the corrosion rate decreased in Al-Si-Cu-Mg matrix B4C reinforced composites during the sliding in 0.05M NaCl solution. © 2013 Elsevier B.V.

Lodos de esgoto, escória de aciaria e lama cal na cultura da soja sob sistema plantio direto em latossolo vermelho

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Aplicação de escória de aciaria e calcário no solo e desenvolvimento do primeiro ciclo da grama bermuda

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Efeito residual da aplicação superficial de calcário e gesso nas culturas de soja, aveia-preta e sorgo granífero

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Alterações dos atributos químicos do solo e resposta da soja à cobertura vegetal e à calagem superficial na implantação do sistema de semeadura direta

Pós-graduação em Agronomia (Agricultura) - FCA

Atlas ambiental como subsídio aos estudos de sustentabilidade - a bacia do Araçuaí no Vale do Jequitinhonha - MG

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Chuvas e escorregamentos na região Noroeste da área urbana de Juiz de Fora - MG: uma abordagem genética em climatologia

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)