Method for rapid extraction of pectic substances from plant materials

A method is described for the rapid extraction of pectic substances from alcohol insoluble solids (AIS) from material of plant origin, especially fruit. Samples of AIS can be prepared for galacturonic acid assay within 60 min using extraction with 0·5m HCl in a Fibertec-1 system (Tecator) for 30 min. The extraction conditions are carefully standardised and operator error is reduced by the elimination of transfer steps, particularly during filtration. The results obtained for plant-derived alcohol insoluble solids containing from 10% to 33% pectic substances were in close agreement with those obtained by enzymic hydrolysis using a commercially available enzyme preparation (Ultrazyme). The method will have application in the rapid, routine estimation of pectic substances in plant materials. © 1987.

Visual outcomes and astigmatism after sutureless, manual cataract extraction in rural China: study of cataract outcomes and up-take of services (SCOUTS) in the caring is hip project, report 1.

OBJECTIVE: To study the visual acuity and astigmatism of persons undergoing cataract extraction by local surgeons in rural China. METHODS: Visual acuity, keratometry, and refraction were measured 10 to 14 months postoperatively for all cataract cases during 4 months in Sanrao, China. RESULTS: Among 313 eligible subjects, 242 (77%) could be contacted, of whom 176 (73%) were examined. Of those who were examined, mean +/- SD age was 69.3 +/- 10.5 years, 66.5% were female, 35 had been operated on bilaterally at Sanrao, and 85.2% had a preoperative presenting visual acuity of 6/60 or worse. Presenting and best-corrected postoperative acuity in the eye that was operated on were 6/18 or better in 83.4% and 95.7%, respectively. Among 27 fellow eyes operated on elsewhere, 40.7% had a presenting acuity of 6/18 or better and 40.7% were blind (P < .001). Mean +/- SD postoperative astigmatism did not differ between 211 eyes that were operated on (-1.13 +/- 0.84 diopters) and 109 eyes that were not (-1.13 +/- 1.17 diopters; P = .27). Presence of operative complications (8.5%) and older age were associated with worse vision; bilateral surgery was associated with better vision. CONCLUSIONS: These results confirm the effectiveness of skill transfer in this setting, with superior outcomes to most studies in rural Asia and to eyes in this cohort operated on at other facilities.

Endothelial cell loss and surgically induced astigmatism after sutureless large-incision manual cataract extraction (SLIMCE).

OBJECTIVES:

To describe a modified manual cataract extraction technique, sutureless large-incision manual cataract extraction (SLIMCE), and to report its clinical outcomes.

METHODS:

Case notes of 50 consecutive patients with cataract surgery performed using the SLIMCE technique were retrospectively reviewed. Clinical outcomes 3 months after surgery were analyzed, including postoperative uncorrected visual acuity, best-corrected visual acuity, intraoperative and postoperative complications, endothelial cell loss, and surgically induced astigmatism using the vector analysis method.

RESULTS:

At the 3-month follow-up, all 50 patients had postoperative best-corrected visual acuity of at least 20/60, and 37 patients (74%) had visual acuity of at least 20/30. Uncorrected visual acuity was at least 20/68 in 28 patients (56%) and was between 20/80 and 20/200 in 22 patients (44%). No significant intraoperative complications were encountered, and sutureless wounds were achieved in all but 2 patients. At the 3-month follow-up, endothelial cell loss was 3.9%, and the mean surgically induced astigmatism was 0.69 diopter.

CONCLUSIONS:

SLIMCE is a safe and effective manual cataract extraction technique with low rates of surgically induced astigmatism and endothelial cell loss. In view of its low cost, SLIMCE may have a potential role in reducing cataract blindness in developing countries.

The challenge of MNCs and development: oil extraction, CSR, Nigeria and corruption

Globalisation has led to a shift in world order with the rise of the corporate non-state actor. This rise has led to an assumption that Multi-National Corporations (MNCs) must assume responsibilities beyond profit maximisation for shareholders. With the rise of the MNC as a corporate non-state actor there have been discussions around the role of business with regard to human rights.

This article looks at the case of oil extraction in Nigeria. Focussing on the historical dependency of Nigeria and the evolution of the state into a resource-dependent country, it looks at the limitations of existing human rights obligations as they relate to business. This article proposes that corporate social responsibility (CSR) policies of MNCs can act as a preliminary stage in the quest for wider human rights protections. It is in motivating MNCs to design and implement effective CSR policies in dependent states like Nigeria, that the challenge lies.

Sediment metal bioavailability in Lake Taihu, China: evaluation of sequential extraction, DGT, and PBET techniques

The European “Community Bureau of Reference” (BCR) sequential extraction procedure, diffusive gradient in thin-films technique (DGT), and physiologically based extraction test were applied to assess metal bioavailability in sediments of Lake Taihu (n = 13). Findings from the three methods showed that Cd was a significant problem in the western lake whereas Cu, Zn, and Ni pollution was most severe in the northern lake. Results from the sequential extraction revealed that more than 50 % of the Cu and Zn were highly mobile and defined within the extractable fraction (AS1 + FM2 + OS3) in the majority of the sediments, in contrast extractable fractions of Ni and Cd were lower than 50 % in most of the sampling sites. Average Cu, Zn, Ni, and Cd bioaccessibilities were <50 % in the gastric phase. Zn and Cd bioaccessibility in the intestinal phase was ∼50 % lower than the gastric phase while bioaccessibilities of Cu and Ni were 47–57 % greater than the gastric phase. Linear regression analysis between DGT and BCR measurements indicated that the extractable fractions (AS1 + FM2 + OS3) in the reducing environment were the main source of DGT uptake, suggesting that DGT is a good in situ evaluation tool for metal bioavailability in sediments.

Medical information extraction in European Portuguese

The electronic storage of medical patient data is becoming a daily experience in most of the practices and hospitals worldwide. However, much of the data available is in free-form text, a convenient way of expressing concepts and events, but especially challenging if one wants to perform automatic searches, summarization or statistical analysis. Information Extraction can relieve some of these problems by offering a semantically informed interpretation and abstraction of the texts. MedInX, the Medical Information eXtraction system presented in this document, is the first information extraction system developed to process textual clinical discharge records written in Portuguese. The main goal of the system is to improve access to the information locked up in unstructured text, and, consequently, the efficiency of the health care process, by allowing faster and reliable access to quality information on health, for both patient and health professionals. MedInX components are based on Natural Language Processing principles, and provide several mechanisms to read, process and utilize external resources, such as terminologies and ontologies, in the process of automatic mapping of free text reports onto a structured representation. However, the flexible and scalable architecture of the system, also allowed its application to the task of Named Entity Recognition on a shared evaluation contest focused on Portuguese general domain free-form texts. The evaluation of the system on a set of authentic hospital discharge letters indicates that the system performs with 95% F-measure, on the task of entity recognition, and 95% precision on the task of relation extraction. Example applications, demonstrating the use of MedInX capabilities in real applications in the hospital setting, are also presented in this document. These applications were designed to answer common clinical problems related with the automatic coding of diagnoses and other health-related conditions described in the documents, according to the international classification systems ICD-9-CM and ICF. The automatic review of the content and completeness of the documents is an example of another developed application, denominated MedInX Clinical Audit system.

Extraction and purification of triterpenic acids from eucalypt bark

A indústria da pasta e do papel é um sector importante da economia mundial, particularmente a que assenta em espécies de Eucalyptus. No entanto, essas indústrias geram quantidades significativas de correntes secundárias de subprodutos e resíduos de biomassa que podem ser exploradas em aplicações de valor acrescentado em vez de serem queimadas para produção de energia. Um exemplo nobre pode ser a produção de ácidos triterpénicos com estruturas dos tipos lupano, oleanano e ursano, dada a sua abundância em alguns destes resíduos, em particular na casca, adotando o conceito de biorrefinaria integrada numa fábrica de pasta. Estes compostos são conhecidos pelas suas inúmeras actividades biológicas, por exemplo, antioxidante, anti-inflamatória e antitumoral, e podem encontrar aplicações em produtos de elevado valor, tais como cosméticos, nutracêuticos ou farmacêuticos. Neste sentido, o estudo das potencialidades das cascas das espécies de eucalipto mais exploradas enquanto fontes de compostos triterpénicos é um tópico relevante. Por conseguinte, foram analisados e comparados em pormenor os teores e composições em ácidos triterpénicos (TTAs) das cascas externas de várias espécies de eucalipto (E. globulus, E. grandis, E. urograndis, E. maidenii e E. nitens). Os teores dos principais TTAs identificados nestas espécies variaram entre 4.5 g/kg no E. urograndis e 21.6 g/kg no E. nitens. Observou-se que as cascas externas de Eucalyptus de zonas temperadas e Mediterrânicas, nomeadamente E. nitens e E. globulus, são mais ricas em TTAs que as espécies de regiões tropicais e subtropicais. Além disso, a casca externa do E. globulus é claramente a mais rica em ácidos com estruturas do tipo ursano enquanto a do E. nitens é a mais rica em ácidos do tipo oleanano e lupano. Estes resultados levaram-nos a estudar a extração dos TTAs da casca de Eucalyptus, bem como a sua posterior concentração e purificação, a qual foi efetuada por extração sólido-líquido convencional combinada com a precipitação de solutos, e por extração com fluidos supercríticos (SFE). No que diz respeito à primeira abordagem referida, foi desenvolvido neste trabalho um método patenteado que permite obter extratos enriquecidos em TTAs das cascas de eucalipto baseado em tecnologias disponíveis no imediato. Em relação à segunda abordagem, e de forma a apostar em processos de baixo impacto ambiental exigidos pelas biorrefinarias do futuro, a SFE surge como uma opção natural. Assim, foi efetuada a SFE da casca caduca do E. globulus com dióxido de carbono puro e modificado para recuperar a fração de TTAs, e os resultados foram comparados com os obtidos por extração em Soxhlet com diclorometano. Foram realizados estudos preliminares sobre a influência da pressão (100-200 bar), a adição de co-solvente (0, 5 e 8% m/m de etanol), e operação em múltiplos passos a fim de avaliar a aplicabilidade da alternativa supercrítica para a sua produção eficiente e selectiva. Os resultados destacaram a influência da pressão e o importante papel resumo (cont.) desempenhado pelo co-solvente neste processo, cujo efeito foi mais relevante do que o aumento da pressão em várias dezenas de bar. Este trabalho foi depois otimizado, usando o planeamento factorial de experiências e a metodologia de superfícies de resposta, para analisar a influência da temperatura (40-60 ºC), pressão (100-200 bar), e teor de etanol (0.0-5.0% m/m) na recuperação dos TTAs e respectiva concentração nos extractos. Nestes intervalos, as melhores condições de operação encontradas foram 200 bar, 40 °C e 5% de etanol, para as quais os modelos de regressão estatisticamente validados previram um rendimento de extração de 1.2% com 50% de concentração em TTAs, correspondendo ao rendimento em TTAs de 5.1 g/kg de casca e uma recuperação de 79.2% comparativamente ao valor do Soxhlet. Os TTAs livres e acetilados apresentaram tendências de extracção bastante distintas devido às suas diferentes afinidades para o CO2 causadas pelas diferentes polaridades: os derivados acetilados aproximam-se de um patamar máximo a cerca de 200 bar e 5% de etanol, enquanto a extração dos TTAs livres apresenta uma tendência sempre crescente no intervalo de condições estudado. Foram também medidas curvas cumulativas de SFE da casca do E. globulus de forma a analisar o comportamento cinético do processo em termos de rendimento total, rendimento em TTAs, rendimento em TTAs livres, rendimento em TTAs acetilados, e concentração dos TTAs nos extractos. Foi analisada a influência da pressão, temperatura, teor de co-solvente e caudal do dióxido de carbono sobre as respostas anteriores. Os dados experimentais foram modelados com os modelos Logístico, de Dessorção, de Placa Plana Simples, e de Difusão. Na globalidade, os resultados confirmaram que a pressão e o teor de etanol têm um efeito significativo sobre as curvas de extração, os rendimentos finais e as concentrações dos extratos, e mostraram a presença de limitações externas à transferência de massa em alguns ensaios. Mais uma vez, as famílias individuais de TTAs livres e acetilados apresentaram diferentes tendências de extracção. A modelação permitiu-nos confirmar não só o importante papel desempenhado pela difusão intraparticular na SFE, mas também a contribuição da resistência no filme em alguns ensaios. Após a análise de todos os resultados, foi efetuado um ensaio em duas etapas em série, possibilitando o enriquecimento do teor em TTAs no extracto devido às diferentes condições adotadas em cada etapa. Por último, um éster metílico de um ácido triterpénico do tipo oleanano - morolato de metilo - foi identificado pela primeira vez enquanto componente da casca de Eucalyptus na casca externa do Eucalyptus grandis x globulus, onde ocorre em teores elevados. A sua extração com CO2 supercrítico foi também realizada, visando a conceção de uma alternativa de extração ambientalmente benigna para este composto. A 200 bar e 60 ºC, a remoção do morolato de metilo atingiu um patamar às 6 h para 5.1 kg h-1 de CO2 / kg de casca. Em geral, e de forma semelhante à SFE da casca do E. globulus, os TTAs acetilados foram mais significativamente extraídos quando comparados com os seus ácidos livres, o que está diretamente relacionado com a natureza menos polar destas moléculas. O trabalho apresentado nesta tese é uma contribuição para a valorização de uma corrente de biomassa com baixo valor na indústria de pasta em duas vertentes complementares. Por um lado, aumentou o conhecimento da composição lipofílica das cascas de Eucalyptus spp. com interesse comercial para a produção de pasta, destacando o seu potencial enquanto fontes de ácidos triterpénicos. Por outro lado, foram desenvolvidos dois processos alternativos e facilmente integráveis numa fábrica de pasta para a sua exploração a partir da casca: um baseado em tecnologias convencionais bem estabelecidas a nível industrial, prevendo a sua aplicação a curto prazo, e um outro baseado na SFE, seguindo as tendências das futuras biorrefinarias.

Mercaptans extraction from jet-fuel streams using ionic liquids

Desulfurization is one of the most important processes in the refining industry. Due to a growing concern about the risks to human health and environment, associated with the emissions of sulfur compounds, legislation has become more stringent, requiring a drastic reduction in the sulfur content of fuel to levels close to zero (< 10 ppm S). However, conventional desulfurization processes are inefficient and have high operating costs. This scenario stimulates the improvement of existing processes and the development of new and more efficient technologies. Aiming at overcoming these shortcomings, this work investigates an alternative desulfurization process using ionic liquids for the removal of mercaptans from "jet fuel" streams. The screening and selection of the most suitable ionic liquid were performed based on experimental and COSMO-RS predicted liquid-liquid equilibrium data. A model feed of 1-hexanethiol and n-dodecane was selected to represent a jet-fuel stream. High selectivities were determined, as a result of the low mutual solubility between the ionic liquid and the hydrocarbon matrix, proving the potential use of the ionic liquid, which prevents the loss of fuel for the solvent. The distribution ratios of mercaptans towards the ionic liquids were not as favorable, making the traditional liquid-liquid extraction processes not suitable for the removal of aliphatic S-compounds due to the high volume of extractant required. This work explores alternative methods and proposes the use of ionic liquids in a separation process assisted by membranes. In the process proposed the ionic liquid is used as extracting solvent of the sulfur species, in a hollow fiber membrane contactor, without co-extracting the other jet-fuel compound. In a second contactor, the ionic liquid is regenerated applying a sweep gas stripping, which allows for its reuse in a closed loop between the two membrane contactors. This integrated extraction/regeneration process of desulfurization produced a jet-fuel model with sulfur content lower than 2 ppm of S, as envisaged by legislation for the use of ultra-low sulfur jet-fuel. This result confirms the high potential for development of ultra-deep desulfurization application.

Extraction of added-value products from biomass using ionic liquids

The main purpose of this thesis is to investigate the potential of ionic liquids (ILs) as a new class of extractive solvents for added-value products from biomass. These include phenolic compounds (vanillin, gallic, syringic and vanillic acids), alkaloids (caffeine) and aminoacids (L-tryptophan). The interest on these natural compounds relies on the wide variety of relevant properties shown by those families and further application in the food, cosmetic and pharmaceutical industries. Aiming at developping more benign and effective extraction/purification techniques than those used, a comprehensive study was conducted using aqueous biphasic systems (ABS) composed of ILs and inorganic/organic salts. In addition, ILs were characterized by a polarity scale, using solvatochromic probes, aiming at providing prior indications on the ILs affinity for particular added-value products. Solid-liquid (S-L) extractions from biomass and using aqueous solution of ILs were also investigated. In particular, and applying and experimental factorial design to optimize the operational conditions, caffeine was extracted from guaraná seeds and spent coffee. With both types of extractions it was found that it is possible to recover the high-value compounds and to recycle the IL and salt solutions. Finally, aiming at exploring the recovery of added-value compounds from biomass using a simpler and more suistainable technique, the solubility of gallic acid, vanillin and caffeine was studied in aqueous solutions of several ILs and common salts. With the gathered results it was possible to demonstrate that ILs act as hydrotropes and that water can be used as an adequate antisolvent. This thesis describes the use of ILs towards the development of more effective and sustainable processes.

Development of a sustainable method for the extraction of lycopene and β-carotene from food wastes

The main objective of the present work is the study of a profitable process not only in the extraction and selective separation of lycopene and β-carotene, two compounds present in tomato, but also in its potential application to food industry wastes. This is one of the industries that produce larger amounts of wastes, which are rich in high value biomolecules with great economic interest. However, the conventional methods used to extract this kind of compounds are expensive which limits their application at large scale. Lycopene and βcarotene are carotenoids with high commercial value, known for their antioxidant activity and benefits to human health. Their biggest source is tomato, one of the world’s most consumed fruits, reason for which large quantities of waste is produced. This work focuses on the study of diverse solvents with a high potential to extract carotenoids from tomato, as well as the search for more environmentally benign solvents than those currently used to extract lycopene and β-carotene from biomass. Additionally, special attention was paid to the creation of a continuous process that would allow the fractionation of the compounds for further purification. Thus, the present work started with the extraction of both carotenoids using a wide range of solvents, namely, organic solvents, conventional salts, ionic liquids, polymers and surfactants. In this stage, each solvent was evaluated in what regards their capacity of extraction as well as their penetration ability in biomass. The results collected showed that an adequate selection of the solvents may lead to the complete extraction of both carotenoids in one single step, particularly acetone and tetrahydrofuran were the most effective ones. However, the general low penetration capacity of salts, ionic liquids, polymers and surfactants makes these solvents ineffective in the solid-liquid extraction process. As the organic solvents showed the highest capacity to extract lycopene and βcarotene, in particular tetrahydrofuran and acetone, the latter solvent used in the development process of fractionation, using to this by strategic use of solvents. This step was only successfully developed through the manipulation of the solubility of each compound in ethanol and n-hexane. The results confirmed the possibility of fractionating the target compounds using the correct addition order of the solvents. Approximately, 39 % of the β-carotene was dissolved in ethanol and about 64 % of lycopene was dissolved in n-hexane, thus indicating their separation for two different solvents which shows the selective character of the developed process without any prior stage optimization. This study revealed that the use of organic solvents leads to selective extraction of lycopene and β-carotene, allowing diminishing the numerous stages involved in conventional methods. At the end, it was possible to idealize a sustainable and of high industrial relevance integrated process, nevertheless existing the need for additional optimization studies in the future.

Bacterial algorithm applied for fuzzy rule extraction

This paper presents a method of using the so-colled "bacterial algorithm" (4,5) for extracting a fuzzy rule base from a training set. The bewly proposed bacterial evolutionary algorithm (BEA) is shown. In our application one bacterium corresponds to a fuzzy rule system.

Fuzzy rule extraction from input/output data

Several alternative approaches have been discussed: Levenberg-Marquardt - no satisfactory convergence speed + local minimum, Bacterial algorithm - problems with large dimensionality (speed), Clustering - no safe criterion for number of clusters + dimentionality problem.

Improved extraction of arabinoxylans from rye bran and production of health beneficial oligosaccharides

Dissertação de mest., Engenharia Biológica, Faculdade de Ciências e Tecnologia, Univ. do Algarve, 2011

Challenges and Potentials for Keyword Extraction from Company Websites for the Development of Regional Knowledge Maps

Regional Innovation Systems describe the relations between actors, structures and infrastructures in a region in order to stimulate innovation and regional development. For these systems the collection and organization of information is crucial. In the present paper we investigate the possibilities to extract information from websites of companies. First we describe regional innovation systems and the information types that are necessary to create them. Then we discuss the possibilities of text mining and keyword extraction techniques to extract this information from company websites. Finally, we describe a small scale experiment in which keywords related to economic sectors and commodities are extracted from the websites of over 200 companies. This experiment shows what the main challenges are for information extraction from websites for regional innovation systems.