666 resultados para Escoamento bifasico
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
The management of urban areas must consider aspects related to urban drainage, especially in hot and humid environments, and such aspects must be incorporated on director plans. This is quite important in urban areas settled on natural fragile hydro-geomorphologic areas. So, the main aim of this paper was to present the urban drainage diagnostic made in Rio Claro (SP-Brazil), discussing its results and evaluating the applied techniques. Further, there were presented some proposed directions based on such analyses. From the obtained results it was possible to verify that the impacts caused by the inefficient urban drainage system incur on direct and indirect effects such as flood, erosion and water quality degradation.
Resumo:
The purpose of this work is to study the theme “infiltration trenches” in some of its main aspects, in order to subsidize the installation of these structures in the urban area of Rio Claro/SP. For sizing, the “rain-envelope method” was used based on local characterization data and the IDF (intensity-duration-frequency) curve. Five locations were chosen in the urban area of Rio Claro for implementation of these devices, considering the soil type, hydraulic conductivity of each area and minimum lot size according to the Master Plan of Rio Claro. This work also presented an estimated reduction of the runoff in urban lots by using infiltration trenches.
Resumo:
This work evaluated the effect of vinasse (residue from sugar cane) in high density polyethylene (HDPE) geomembranes having in mind that it is deposited at temperatures of 80-90˚C on the geomembrane in storage tanks. The objective was to evaluate the resistance of the geomembrane in contact with residue in a total period of 4 months. Physical and mechanical tests, and thermogravimetric analysis (TGA) were used to determine degradation of polymer membranes after chemical immersion. In general, the results obtained show that the vinasse affected the geomembranes significantly in some aspects, for instance, the thickness of the material presented a variation of 7.8%. The average values in both directions at yielding showed a significant loss of tensile strength (34.13%) and strain (23.48%) and an increase in the modulus of elasticity (9.63%). At the rupture the behavior presented the same trend: a loss of 32% for tensile strength and 24.4% for the deformation were observed. Tear strength presented small decrease (4.72%) and puncture resistance a increase of 7.9% after immersion of geomembranes. The TGA tests were not efficient to detect evidence of degradation in samples of geomembranes after exposures, but identified problems in the quality of the supplied material.
Resumo:
The development of the National Curriculum Parameters for High School (PCN) is established from a logic in which the disciplines are integrated and coordinated in order to promote interdisciplinarity. However, there are few didactic-pedagogic activities that enable teachers in practice to reach this goal. In this paper, we propose an experimental activity to be used with High School students, addressing the concept of viscosity from an interdisciplinary perspective between the disciplines of Physics and Chemistry. For that purpose, flow times of sucrose solutions of different concentrations will be measured in a glass Ford and these data will be used to construct a calibration curve, which will be used to determine the concentration of sucrose in artificial flavor syrup of gooseberry.
Resumo:
This study investigated the effect of slope and antecedent soil moisture on the water depth stored and percolated on extensive green roofs built in pilot scale. For this purpose, slopes of 10, 20 and 30% were investigated. Moisture was measured before and after each test in order to determine the differential moisture (∆U). The experimental runoff and percolated flow were analyzed by varying moisture and slope. Apparent color and turbidity were measured on runoff and percolated flow for each one of the modules. The results yielded that for the slopes of 10% the smaller values of runoff was obtained (average of 1,01% ± 0,7%). For the others slopes (20% and 30%), the runoffs were around 35% ± 15%. The sum of runoff and percolated water results in 77% (average) for slope of 10% and 80% for 20% and 30%. The slope and moisture have explained 87% of data for retained water and 81% for runoff. For percolated flow the inverse trend was observed. The retained water was 11,6±1,4mm for the module with 10% of slope, around 10,0±1,2 mm for the module with 20% of slope, and about 9,5±1,1 mm for the module with 30%. The results pointed out that both slope and antecedent moisture are crucial for runoff reduction and for material transportation.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Pós-graduação em Engenharia Mecânica - FEIS
Resumo:
The numeric simulation is an important tool applied in understanding the dynamics of groundwater flow. In a hydrogeological model the processes responsible for groundwater flow are described by numerical formulations that allow the simplification, representation and understanding of the dynamics of the Aquifer System. In this work, a steady state groundwater flow simulation of Urucuia Aquifer System (UAS) part of the Corrente river basin was conducted, using the finite element method through software FEFLOW, to understand the dynamics of groundwater flow and quantify the hydrologic balance. The aquifer system Urucuia lodges in the São Francisco hydrogeological province and corresponds to a set of interconnected aquifers that occur in rocks from Urucuia group in the Urucuia sub-basin described by Campos e Dardenne (1997). The system is a porous media one, in a shape of a thick table mountain, consisting essentially of sandstones. The Corrente river basin is located in UAS in Western State of Bahia and it's one of the main units to maintaining permanent flow (Q95) and average natural flow of the São Francisco river. The simulation performed in this work obtained the following results for the modelled region: horizontal hydraulic conductivity of 3 x 10-4 m/s and vertical one 6 x 10-5 m/s; maximum recharge of 345 mm and minimum of 85 mm/a. It was concluded that: (1) regional groundwater flow has eastbound; with an exception of the extreme northeast portion, where the flow has opposite direction; (2) there are smaller water side dividers with an approximate direction EW, that guide the flow of water to the drainage that cut the aquifer; and (3) the UAS at Corrente river basin can be understood as a free regional aquifer system, isotropic and homogeneous. Regionally, the small lithological variations present in the Urucuia group can be neglected and do not exhibit significant influences on the dynamics of ground water flow
Resumo:
The development of cities is initially nearby rivers and with the intensification of the urbanization process occurs the soil sealing, leading to an increased level of water runoff, and, consequently, in a greater number of floods. The main goal of this study is to verify the interference of land occupation in the floods of the Lavapés Stream basin, Rio Claro (SP), in five temporal series, 1962, 1972, 1988, 1995 and 2014. The characterizations of land use were made from photo-interpretation and, thus, were produced thematic maps on scale 1: 20.000. The description of the Soil Conservation Service, 2007 was the basis for the classification of land use, thus achieving the CN parameter (Curve Number) used in hydrologic modeling done in IPHS1 program. The results indicate that soil sealing associated with the growth of the city of Rio Claro are responsible for increasing of the discharge in the Lavapés Stream basin and floods in this watershed
Resumo:
The water management in any area is highly important to the success of many business and also of life and the understanding of your relationship with the environment brings better control to its demand. I.e. hydrogeological studies are needed under better understanding of the behavior of an aquifer, so that its management is done so as not to deplete or harm it. The objective of this work is the numerical modeling in transient regime of a portion of the Rio Claro aquifer formation in order to get answers about its hydrogeological parameters, its main flow direction and also its most sensitive parameters. A literature review and conceptual characterization of the aquifer, combined with field campaigns and monitoring of local water level (NA), enabled the subsequent construction of the mathematical model by finite elements method, using the FEFLOW 6.1 ® computational algorithm. The study site includes the campus of UNESP and residential and industrial areas of Rio Claro city. Its area of 9.73 km ² was divided into 318040 triangular elements spread over six layers, totaling a volume of 0.25 km³. The local topography and geological contacts were obtained from previous geological and geophysical studies as well as profiles of campus wells and SIAGAS / CPRM system. The seven monitoring wells on campus were set up as observation points for calibration and checking of the simulation results. Sampling and characterization of Rio Claro sandstones shows up a high hydrological and lithological heterogeneity for the aquifer formation. The simulation results indicate values of hydraulic conductivity between 10-6 and 10-4 m / s, getting the Recharge/Rainfall simulation in transient ratio at 13%. Even with the simplifications imposed on the model, it was able to represent the fluctuations of local NA over a year of monitoring. The result was the exit of 3774770 m³ of water and the consequently NA fall. The model is considered representative for the...
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
This paper analyzed the energy flow of a route currently designed to transport ethanol from the Midwest region of Brazil for exportation, more precisely from the city of Aparecida do Taboado (MS) to the port of São Sebastiao (SP). The route studied a single modal combined into two pieces, duct - duct. The direct and indirect energy, involved in the operations were used to account for the inputs and outputs of energy from and into the system. The energy input and output were the variables, diesel fuel, lubricants, greases, indirect energy consumption of machinery and equipment, power consumption of labor, the energy consumption and energy consumption in depreciation and maintenance of roads. We found that this route has specific energy consumption of 0,14 MJ km-1 m-3 . The Net Energy Gain (GEl), the Energy Efficiency global (EEg) and Renewable Energy Balance (BEr), which were the energy indicators adopted in this study were obtained respectively: 1.585.958.977,00 MJ; 200,72 and 1.593.900.000,00MJ.
Resumo:
The morphometric characterization of watersheds is of great importance in assisting the planning of these areas to preserve the environment and maintain the quantity and quality of water production. The aim of this study was to characterize the morphology and simulate the areas of permanent preservation according to the Brazilian Forest Code of watershed of the Água-Fria stream. The studied area is located in the municipality of Bofete-SP, between the geographic coordinates: 48° 09' 30" to 48° 18' 30" longitude (WGr) and 22° 58' 30" to 23° 04' 30" latitude S. The results showed a 5th order micro watershed with an area of 152.43 km2 and low drainage density of 1.04 km/km2. Circularity was 0.51 and form factor was 0.41, which is considered low, and therefore with an oblong/oval shape. The sinuosity index of 1.29 revealed a tendency of rectilinear channels with compactness coefficient value of 1.38 and distance of runoff flow of 520m. Simulation of areas of permanent preservation shows an ideal model as the way springs and watercourses should be protected according to the Brazilian Forest Code, amounting to an area of 10.02 km2.