863 resultados para Ershov hierarchy
Resumo:
整子制造系统是智能制造计划中提出的一种未来的制造模式,本文对其概念、理论和研究状况进行了介绍和分析.整子是构造制造系统的一种模块,它具有自治性及合作性,而整子制造系统则追求快速适应环境变化的能力.整子制造系统采用了一种松弛的动态递阶控制结构.目前整子制造系统仍然处于对“下一代制造模式”的研究阶段,离实际应用还有一定的距离。
Resumo:
本文简要介绍了美国普度大学CIM参考模型的具体内容、系统特征、系统经济效益、系统发展趋势以及存在的一些问题。
Resumo:
水资源规划是一个复杂的系统规划问题,所以,在水资源规划中,含有大量的不精确的统计数据和模糊关系。由于这些特点,水资源规划必须用特殊的方法来解决。 本文将层次分析法(AHP)和模糊规划(Fuzzy Programming)方法相结合,形成了一种多目标规划的求解方法,并应用于大凌河流域水资源规划研究的课题中,通过实际分析可以看到,这种方法具有较好的实用性。
Resumo:
In the production tail of oilfield, water-cut is very high in thick channel sand oil reservoir, but recovery efficiency is relative low, and recoverable remaining oil reserves is more abundant, so these reserves is potential target of additional development. The remaining oil generally distributed with accumulation in certain areas, controlled by the reservoir architecture that mainly is the lateral accretion shale beddings in the point bar, so the study of reservoir architecture and the remaining oil distribution patterns controlled by architecture are very significant. In this paper, taking the Minghuazhen formation of Gangxi oilfield as a case, using the method of hierarchy analysis, pattern fitting and multidimensional interaction, the architecture of the meandering river reservoir is precisely anatomized, and the remaining oil distribution patterns controlled by the different hierarchy architecture are summarized, which will help to guide the additional development of oil fields. Not only is the study significant to the remaining oil forecasting, but also it is important for the theory development of reservoir geology. With the knowledge of sequence correlation and fluvial correlation model, taking many factors into account, such as combination of well and seismic data, hierarchical controlling, sedimentary facies restraint, performance verification and 3-D closure, an accurate sequence frame of the study area was established. On the basis of high-resolution stratigraphic correlation, single layer and oil sand body are correlated within this frame, and four architecture hierarchies, composite channel, single channels, point bars and lateral accretion sandbody are identified, The result indicates that Minghuazhen Formation of Gangxi oilfield are dominated by meandering river deposition, including two types of channel sandbodies, narrow band and wide band channel sandbody, and each of them has different characteristics of facies variation laterally. Based on the identification of composite channel, according to the spatial combination patterns and identified signs of single channel, combined with channel sandbody distribution and tracer material data, single channel sandbodies are identified. According to empirical formula, point-bar scales of the study area are predicted, and three identification signs are summarized, that is, positive rhythm in depositional sequence, the maximum thick sand and near close to the abandoned channel, and point bars are identified. On the basis of point bar recognition, quantitative architecture models inner point bar are ascertained, taking the lateral accretion sand body and lateral accretion shale beddings in single well as foundation, and quantitative architecture models inner point bar as guidance, and result of tracer material data as controlling, the the lateral accretion sand body and lateral accretion shale beddings are forecasted interwell, so inner architecture of point bar is anatomied. 3-D structural model, 3-D facies model and 3-D petrophysical properties models are set up, spatial distribution characteristics of sedimentary facies and petrophysical properties is reappeared. On the basis of reservoir architecture analysis and performance production data, remaining oil distribution patterns controlled by different hierarchy architecture units, stacked channel, single channel and inner architecture of point bar, are summarized, which will help to guide the additional development of oil fields.
Resumo:
In the intermediary and later stage of oil field development, remaining oil disperses fiercely, the contradiction in the layer has become the main problem and the distribution of remaining oil is transforming to the difference of single sand-body. So, the fine description research of reservoir is becoming a tendency and the methods of remaining oil research need new developments. In the research of “The Single-sand-body Architectural Element and Potentiality Analysis Research of Meandering River, GuDao Oil Field”, the research principle is analytical hierarchy process and schema prescription what are reservoir fine description methods under the condition of dense well pattern. The knowledge of regional sedimentary system and sedimentary facies is the foundation of this research. According to the 3D distribution model of the microfacies sand-body of fluvial facies, stratigraphic unit classification & coenocorrelation of 154 wells are completed in the research of meandering river sand-body in Ng3-4. In this research, the 3D distribution of microfacies sand-body in the main layers are settled. The architectural element model of Ng4 point bar is analysed using the drill core and FMI data. According to the overgrow model of point bar, the surfaces of lateral accretion is traced and the architectural element model of point bar is settled. In the research, the control of micro-facies sand-body of meandering river to the distribution of remaining oil is analysed and the potential area is proposed. All these will play an important role in the development of GuDao oil field. In this research, abundant of logging data, drill core data and production performance data are used to analyse the contributing factor of single sand-body in the Ng3-4 meandering river. Using the technology of geological modeling, all that are researched including the 3D distribution scales of meandering river point bar, the control affection of inner lateral accretion layer to the distribution of oil & gas and remaining. Then, the way of remaining oil development in the sand-body of meandering river is improved. The innovation of the research technology includes (1) the presentation of the conception and research methods of micro-facies sand-body (2) enriching the content of reservoir architectural element research and (3) to renew the research method of remaining oil analysis. The research has practiced with obvious effect.(1)It is deepened into understand the river facies reservoir construction of Gudao oil field, By Building the reservoir construction and studying the effect of diffent deposit or geological interface to fluid partition and to the distribution of the remaining oil, we improved the understanding to the distribution of the remaining oil;(2)By building the distribution mod of the remaining oil in the reservoir construction and making the remaining oil description detailed,the development direction of old oil field is more clear;(3)Expanded the application scales of the horizontal well and enhanced the application effects of the horizontal well technique , we designed and drilled 23 ports horizontal wells in all , the cumulative hydrocarbon production is 10.6*104 t;(4) According to the findings of the internal building structure in reservoir of the fluvial facies in the region of interest, and uniting the injection/production corresponding states、the producing history and the dynamic monitoring documents of the oil/water wells in the flooding units , we researched the residual oil distribution in the point bar , and found the distribution regular patterns of the remaining oil, and comprehended the distribution of the remaining oil . In base of that , we proceeded the optimizing designs of the oil well potentialities , and advanced the effect of the treatment potentials . It is proved that , it was very important that internal building structure research of the single sand body of reservoir for guiding the high efficiency potentialities of the remaining oil in the high water cut stage .
Resumo:
Considering the lacking of standard for the classification of Accumulative slopes so far, research working was conducted based on the results of geological investigation, data analysis and experiment carried out in Wanzhou. By mean of statistical method and grey system, the author studied in detail inflationary factors to Accumulative slopes. In order to study the mechanism of Rock-Soil Aggregate (RSA), numerical testing method was used. Coordinates in the two and three dimensional space and its corresponding rock fragments in the sample were generated randomly by VB and Particle flow code. After being built the models of RSA with different rock content, uniaxial and triaxial numerical simulation tests were carried out respectively. In order to study the effect of rainfall in Accumulative slopes, in situ infiltration testing had been conducted on site in Wanzhou, Three Gorges Area. Relationship between the infiltration rate and amount of precipitation has been obtained. Eleven factors are considered in the classification of Accumulative slopes in this paper.(1)On the basis of four basic factors and four inducing factors, sum-and-difference method for the classification system has been built. (2)After weight of factors being determined by analytic hierarchy process and membership function of Accumulative slopes stability being built in virtue of fuzzy mathematics, AHP-FM model of Accumulative slopes stability has been completed. In the end of this paper, having been applied on stability of Accumulative slopes in Three Gorge area and compared with result by limit equilibrium, classification system has good effect.
Resumo:
Synthetic Geology Information System(SGIS) is a part of the theory of Engineering Geomechanics-mate-Synthetics(EGMS), is also a development of its technical methodology. SGIS includes ways of geology engineering investigation, design, and construction. Although SGIS has an integrate theory frame, and some parts of it have gained great progress, the completion of SGIS is a continuous and accumulative process. This paper analyses the ways and principle of building knowledge database and model database, summarizes the experts' experience on exploration methods selection and the characters of exploration models, combining with the application of Decision Support System(DSS) in Decision support of Synthetic Exploration Methods for Railway engineering Geology. By the analysis of hierarchy structure of the model database, the effects of geology engineering factors on the selection of exploration methods are expressed. By the usage of fuzzy patterns recognize, hierarchy structure analysis, fuzzy collection closement analysis etc, the software of DSS for engineering design and construction are developed. At same time, by the development of Monitoring Data Analysis System and experiment data management system of Hydro-power project, this paper discussed the data management of science experiment of Hydro-power project by the usage of synthetic database and the usage of Geography Information System(GIS) and DSS technics. The technic of visual operation of data process and project monitoring system are presented. The intelligence algorithm of self-adoption is carried out to improve the data process and analysis of monitoring. Items of the project theoretical analysis and data process are designed in detail. All the theory and technical methods presented in this paper are one part of SGIS, in which the application of DSS and GIS, is an important step of the progress and completion of SGIS.
Resumo:
This dissertation tries to combine the new theories of high-resolution sequence stratigraphy and reservoir architecture with fine sedimentology to form a integral theory system -"high-resolution sequence sedimentology", which can be applied widely ranging from the early petroleum exploration to the tertiary recovery stage in marine and terrestrial basin. So the west slope area in south of Songliao basin, in which, early-fine exploration have been developed, and Xingnan area of Daqing placantictine in high water-bearing and tertiary recovery stage, are selected as target areas to research and analyze. By applying high-resolution sequence stratigraphy theory as well as analysis of source area-facies, the west slope area has been divided into two source areas and three drainage systems and the following conclusions have been drawn: three high values sandstone areas, two sandstone pinchout zones and one stratigraphic pinchout overlap; the facies between Baicheng-Tongyu drainage system is frist ascertained as large-scale argillaceous filled plain facies; fine-grained braided channel-delta depositional system has been found; plane sedimentary facies and microfacies maps of different-scale sequence have been completed, and then twenty-eight lithologic traps have been detected in the east of Taobao-Zhenlai reverse fault zone; In no exploration area of the west, large-scale stratigraiphic overlap heavy oil reservoirs has first been found, which has become an important prograss. In Xingnan area, in the view of high-resolution sequence stratigraphy, the surface of unconformity (the bottom of SSC13) in P I group has been identified, and the following method and technique have been advanced: the division and correlation methods of short-scale base-level cycle sequence (SSC); the comprehensive research methods of SSC plane microfacies; the division technique of hierarchy and type of flow unit, the origin of large-scale composite sandbody and flow unit; And ,on the basis of these, 103 monosandstone bodies and 87 flow units of the third levels have been identified, and four levels of flow units model of five sandstone-bodies types have been established. Because it is a very difficult task all over the world to research architecture in subsurface monosandstone body, brings forward a series of techniques as follows: technique of researching architecture of thin interbed in subsurface monosandstone body; classification, type and liquid-resisting mechanism of thin interbed; multiple-remember vertical subsequence model of remaining oil in monosadstone body. Models of heterogeneity and architecture of thin interbed in five types of monosandstone body have been established. Applying these techniques, type and distribution of remaining oil in different types of monosandstone bodies have been predicated.
Resumo:
Facing the problems that Dagang region of Huanghua Depression has high exploration degree and its remaining resource potential and structure are not clear, the theory of Petroleum Accumulation System (PAS) is applied to divide and evaluate the oil/gas systems quantitatively. Then, the petroleum accumulation systems are taken as units to forecast and analyse the oil/gas resources and their structure using statistical methods of sampling analysis of discovery process model and generalized pareto distribution model. The exploration benefit of the unit is estimated using exploration simulation methods. On the basis of the above study, the resource potential of Huanghua Depression is discussed.Huanghua Depression can be diveded into four petroleum accumulation systems, i.e. North PAS5 Middle Qibei PAS, Middle Qinan PAS and South PAS. Each PAS can be diveded futher into several sub- PASs. Using the basic princple of Analytical Hierarchy Process, the method of quantitative evaluation of PAS is established. Then the elements and maturity of PAS are evaluated quantitatively.Taking migration and accumulation units and sub-PASs as prediction units, sampling analysis of discovery process model and generalized pareto distribution model are applied comparatively to forecast the resource structure of eight migration and accumulation units in six PASs of medium-high exploration degree. The results of these two methods are contrasted and analyzed. An examination of X2 data of these two models from exploration samples shows that generalized pareto distribution model is more effective than sampling analysis of discovery process model in Huanghua Depression. It is concluded that minimum and maximum size of reservoir and discovery sequence of reservoirs are the sensitive parameters of these two methods.Aiming at the difficult problem of forecast in low exploration degree, by analysis of relativity between resource parameters and their possible influential geological factors, forecast models for resource parameters were established by liner regressing. Then the resource structure is forecasted in PASs of low exploration degree.Based on the forecast results, beginning with the analysis of exploration history and benefit variation, the exploration benefit variation of the above PASs is fitted effectively using exploration simulation method. The single well exploration benefit of remaining oil resource is also forecasted reasonably.The results of resource forecast show that the total oil resources ofHuanghua Depression amount to 2.28 b illion ton. By the end o f 2 003, the accumulative total proved oil reserve is 0.90 billion ton and the remaining oil resources is 1.38 billion ton. The remaining oil resource is concentrated in Kongdian-Dengmingshi, Banqiao-Beidagang, Qidong-Yangerzhuang and Baidong-Qizhong sub-PASs.
Resumo:
Social dilemmas are defined as such situations in which short-term individual and long-term collective interests are at odds (Hardin, 1968; Messick & Brewer, 1983). Severe social problems lead more and more researchers to pay attention to the issue of social dilemmas. Until now, research has widely examined the factors influencing cooperation in social dilemmas, and provided solutions to social dilemmas. In the need of theory development, previous research generally simplified the situation of realistic social dilemmas. Therefore, few studies have explored the issue of cooperation in social dilemmas in an intergroup situation. On the other hand, there has been little empirical attention for such issues in countries outside of United States and Western Europe. To meet this gap, the present study grounded itself in social identity theories and examined the effect of unequal group status on behavioral decision making in social dilemmas. To this end, the study designed three experiments to examine how individuals with different group status response psychologically and behaviorally to cooperation in intragroup and intergroup social dilemmas. In experiment 1, the study examined how independent and interdependent self- construals affect cooperative behavior in an intragroup social dilemma. The results showed that when individuals were primed with interdependent (as opposed to independent) self-construal, they consistently contributed highly, regardless of context manipulation. In contrast, those primed with independent self-construal contributed less in the investment game but only when placed in a context where group members were encouraged to think about their individual (versus shared) fate. Results supported the idea that independent self-construal in a low interdependent context produces the most competitive behavior and that this effect was partially mediated by the feeling of interaction within a group. In experiment 2, the study examined how the effect of group status on different level of cooperation in a nested social dilemma was moderated by individual status, and what roles ingroup and superordinate identifications played in the above effect. Results found that individuals in higher status groups tended to allocate more to private account and less to subgroup account compared to those in lower status group; individuals in higher status groups allocated more to higher level accounts than to private account, whereas those in lower status acted in a reverse way. The results indicated that group status (compared to individual status) exerted a positive influence on behavioral decision making in social dilemmas, with higher group status contributing more to subgroup as well as collective interests. Results also found that the effect of group status and/or individual status on cooperation in social dilemmas was moderated by sex. As for individual status, results showed that the effect of individual status on subgroup interest was significantly moderated only by the combination of higher ingroup identification and lower superordinate identification. In experiment 3, the study explored how group stability and cognitive categorization interactively influenced the relationship between group status and behavioral decision making in a social dilemma. Results did not support the prediction that group status and stability interactively affected behavioral decision-making in social dilemmas. However, it was found that this relationship was moderated by which level individuals categorized themselves at. When categorization at the individual level was salient, individuals in high status group contributed more to subgroup account than those in low status group if they perceived a stable status hierarchy; whereas they contributed more to private account and less to collective account if they perceived that the status was instable. On the other hand, when categorization at the subgroup level was salient, individuals in high status group contributed less to collective account than those in low status group if they perceived that the status was stable; whereas they contributed less to private account and more to subgroup account if they perceived an instable status relation. In summary, the present study suggests that cooperation with ingroup forms the basis of social harmony, and higher status for everyone in any given group is a necessary for social development. On the other hand, individuals in higher status group tend to be more selfish once they realize that their current status hierarchy is unstable. However, activating their collective identity will to some degree increase the level of their cooperation with the collective. The study thus provides psychological explanations on how to construct group harmony and management suggestions on how to solve social conflicts.
Resumo:
Classification is a kind of basic cognitive process, and category is an important way for human beings to define the world. At the same time, categories are organized in a hierarchical way, which makes it possible for human beings to process information efficiency. For those reasons, the development of classification ability is always one of the foci in developmental psychology. By using the methods of spontaneous and trained classification of both familiar stimuli materials and artificial concepts, this research explored the 4-6 year old children's classification criteria. And by the artificial concept system formed in these classification criteria experiments, the mastery degree of class hierarchy in these young children was analyzed. The main results and conclusions are: 1) The classification ability increases quickly among kindergarteners from 4 to 6 year old: the 4 year old children seemed unable to classify objects by classificatory criteria, however, the 6 year ones had shown the ability in many experimental conditions. But the main basis of classificatory criteria in these young children, including 6 year old ones, was the functional relation of the objects but the conceptual relations, and their classification criteria was not consistent because they seem to be easily affected by experimental conditions. 2) The age of 5 is a more sensitive period of classification ability development: for the children of 5 year old, it was found that their classification ability was easily enhanced by training. The zone of proximal development in classification ability by category standard could probably lie in this period of age. 3) Knowledge is an important factor that affects young children's classification ability, meanwhile, their classification activity are affected by cognitive processing ability: young children exhibited different classification ability as they had different understanding of stimuli materials. Kindergarteners of different age were significantly different in their classification ability as the difference in cognitive processing ability, even if they had the same knowledge about the stimuli materials. 4) Different properties of class hierarchy are different in difficulty for young children: the 5-6 year old children showed that the could master the transitivity of the class hierarchy. No matter under what learning condition, they could answer most of the transitivity questions correctly and infer the property of the sub-class according to that of the super-class. The young children at 5-6 years old had mastered the branching property of class hierarchy at a relative high level, but their answers were easily affected by the hints in the questions. However, it seemed that the asymmetry of class hierarchy was difficult for young children to learn. Because young children could not understand the class inclusion relation, they always drew wrong conclusions about super-class from sub-class in their classification.
Resumo:
Interface has been becoming a more significant element today which influences the development of shopping on-line greatly. But in practice the attention arisen from society and study made are quite inadequate. Under this circumstance, I focus my study on the purpose of improving understanding of the engineering psychological factors, which definitely will play a crucial role in shopping on-line representation in future, and of the relations between them through the following experimental research. I hope it can give a basic reference to the practical application of shopping on-line representation pattern and continuous study. In current thesis, an analysis was made on the basis of engineering psychology principles from three aspects, i.e. person (users), task and information environment. It was considered that system overview and information behavior model would have great impact on the activities of users on the web and that representation pattern of information system would affect the forming of system overview and behavior pattern and then further after the performances of users in information system. Based on above-mentioned statement, a three-dimensional conceptual model was presented which demonstrates the relations between the crucial factors, which are media representation pattern, system hierarchy and objects in information unit. Thereafter, eight study hypothesis, which are about engineering psychological factors of virtual reality (VR) representation in shopping on-line system, was taken out and four experiments were followed up to testify the hypothesis. -In experiment one, a research was made to study how the three kinds of single media representation pattern influence the forming of system overview and information behavior from the point view of task performance, operating error, overall satisfactory and mental workload etc. -In experiment two, a study of how the combined media representation pattern of system hierarchy influences users' behavior was carried out. -In experiment three, a study of the hierarchy structure feature of VR representation pattern and the tendency of its width and depth to the effects of system behavior was made. -In experiment four, a study of the location relations between different parties in VR scene (information unit) was made. The result is as follows: -During structure dimensional state: Width-increasing caused more damage to the speed of users than depth-increasing in VR representation pattern. Although the performance of subjects was quite slow in wider environment, yet the percentage rate of causing errors was in lowest level. -During hierarchy representation pattern: 1. Between the representation patterns of the three media, no significant differences was found in terms of the speed of fulfilling the task, error rate, satisfactory, mental workload etc. But the pattern with figure- aided gained the worst results on all of these aspects. 2. During primary stage of the task and the first level of the hierarchy, the speed of subjects' performance in VR pattern was slower than that in text pattern. While with developing of the task and going deeper level of the hierarchy, the speed of users' performance in VR representation pattern reached to the highest level. 3. Effects in VR representation pattern was better than that in text pattern in higher level of the system. The representation pattern in highest level has greatest impact on the performance of the system behavior, whereas results of the only VR representation in the middle part of hierarchy would be worst. 4. Activity error in single media representation pattern was more than that in combined media representation pattern. 5. Individual differences among subjects had effects on the representation pattern of the system. During VR environment, behavior tendency of party A had a significant negative correlation to the quantities of errors. -In VR-scene representation: Physical-distance and flash influenced the subjects' task performance greatly, while psychological-distance has no outstanding impact. Subjects' accurate rate of performing increased if objects with same relation were in the same structure position, in the state of close psychological-distance or if the object target flashed (not reliable). Although the article limits the topic only on the present-existing questions and analysis of shopping-on-line, as a matter of fact, it can also apply for other relevant purposes on the web. While the study of this article only gives its emphasis on the researching-task with definite goal, making no consideration of other task conditions and their relations with other navigation tools. So I hope it lay a good start to make continuous research in this areas.
Resumo:
Recent developments in microfabrication and nanotechnology will enable the inexpensive manufacturing of massive numbers of tiny computing elements with sensors and actuators. New programming paradigms are required for obtaining organized and coherent behavior from the cooperation of large numbers of unreliable processing elements that are interconnected in unknown, irregular, and possibly time-varying ways. Amorphous computing is the study of developing and programming such ultrascale computing environments. This paper presents an approach to programming an amorphous computer by spontaneously organizing an unstructured collection of processing elements into cooperative groups and hierarchies. This paper introduces a structure called an AC Hierarchy, which logically organizes processors into groups at different levels of granularity. The AC hierarchy simplifies programming of an amorphous computer through new language abstractions, facilitates the design of efficient and robust algorithms, and simplifies the analysis of their performance. Several example applications are presented that greatly benefit from the AC hierarchy. This paper introduces three algorithms for constructing multiple levels of the hierarchy from an unstructured collection of processors.
Resumo:
We present the results of an implemented system for learning structural prototypes from grey-scale images. We show how to divide an object into subparts and how to encode the properties of these subparts and the relations between them. We discuss the importance of hierarchy and grouping in representing objects and show how a notion of visual similarities can be embedded in the description language. Finally we exhibit a learning algorithm that forms class models from the descriptions produced and uses these models to recognize new members of the class.
Resumo:
Planner is a formalism for proving theorems and manipulating models in a robot. The formalism is built out of a number of problem-solving primitives together with a hierarchical multiprocess backtrack control structure. Statements can be asserted and perhaps later withdrawn as the state of the world changes. Under BACKTRACK control structure, the hierarchy of activations of functions previously executed is maintained so that it is possible to revert to any previous state. Thus programs can easily manipulate elaborate hypothetical tentative states. In addition PLANNER uses multiprocessing so that there can be multiple loci of changes in state. Goals can be established and dismissed when they are satisfied. The deductive system of PLANNER is subordinate to the hierarchical control structure in order to maintain the desired degree of control. The use of a general-purpose matching language as the basis of the deductive system increases the flexibility of the system. Instead of explicitly naming procedures in calls, procedures can be invoked implicitly by patterns of what the procedure is supposed to accomplish. The language is being applied to solve problems faced by a robot, to write special purpose routines from goal oriented language, to express and prove properties of procedures, to abstract procedures from protocols of their actions, and as a semantic base for English.