1000 resultados para Energia - Fontes alternativas - Ceará
Resumo:
Com a busca por fontes de energia alternativas, o gás natural vem adquirindo posicionamento de destaque por seu relativo baixo custo de aquisição ao consumidor final e por apresentar reduzidos impactos na implantação de dutovias, comparados com outras fontes de energia (hidroelétrica e fissão). O presente trabalho foi direcionado para a verificação de possíveis impactos oriundos de vazamentos em tubulações de gás em sua fase operacional. A área de estudo localiza-se no Município de São Paulo; sua escolha deve-se por apresentar tubulações centenárias que demandam constantes intervenções ou manutenções e pela fácil captação de amostras para análise. Foram amostrados 40 pontos e nestes analisados aspectos dos meios antrópico, biótico e físico-químico. O método adotado fundamentou-se na caracterização dos dutos de gás e sua manutenção, no diagnóstico ambiental, considerados os fatores ambientais solo, ar, flora, fauna, condições de vida da população e paisagem urbana, e posterior identificação de impactos, nas situações de alteração dos impactos ambientais. Os resultados demonstraram que qualquer vazamento de gás gera uma alteração em pelo menos um fator ambiental, denotando um impacto. Novas linhas de estudo são propostas como melhor análise químico-física do material exposto ao contaminante e reações químicas do odorante com o solo que teve contato.
Resumo:
Pós-graduação em Biotecnologia - IQ
Resumo:
Pós-graduação em Ciências Sociais - FFC
Resumo:
Pós-graduação em Química - IQ
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Pós-graduação em Agronomia (Energia na Agricultura) - FCA
Resumo:
Given the increasing demand for fossil fuels to power the engines of the global economy, and also the slow process of synthesis of oil, it becomes necessary to develop new sources of renewable energy in addition to improve promising sources that already exist, turning them competitive. Based on this, biomass is shown very promising between the most popular energy sources due to its availability, applicability, and above all, the fact of not emitting green house gases when analyzing the whole carbon cycle. In this sense, this work presents, through an environmental, technical and economic analysis, the impact in an aluminum mill of replacing the use of electricity, in one process, by a boiler fueled with biomass from waste process of packaging the finished product with pallets. Thus, besides the reduction of CO2 emissions, financial gains are targeted, since the main goal of the corporations that require such power is to maximize its profits
Resumo:
Due to the high value of the bill that the Brazilian has been paying, one of the most expensive in the world, is becoming increasingly attractive the option for renewable energy in form of distributed micro and minigeneration. In other words, the renewable energy sources are becoming attractive not only because of environmental concerns, but also due to economic issues. This has become even more relevant and concrete after approval of rules by National Agency of Electric Energy (ANEEL) on 4/17/2012 (Normative Resolution n ° 482/2012 of 04/17/2012) aimed at reducing barriers to installation of small distributed generation, including microgeneration, with up to 100 kW of power, and minigeneration, 100 kW to 1 MW. The Normative Resolution n ° 482/2012 creates the Energy Clearing System, which allows consumers to install small generators in its consumer unit and exchange energy with the local distributor. The rule applies to generators that use renewable sources of energy (hydro, solar, biomass, wind and cogeneration qualified). In this context, this paper presents a technical and economic analysis of installing a residential microgenerating plant composed of photovoltaic cells, solar panels and small wind turbines
Resumo:
Electrical energy is present in the lives of all people and is extremely important that it be delivered to end users with plenty of quality, safety and low costs. The electric power substations are responsible for transmission and distribution of electricity generating sources to consumers, and with technological advances and the subsequent automation of same, the electricity began to be delivered with greater continuity and reliability. Protection systems in substations are largely responsible for making the electricity reaches the final consumer with quality, since their function is to prevent the spread of any type of failure occurred at any point of transmission to the load centers. These systems consist primarily by the current transformers and potential, by the protective relays and circuit breakers and switchgear. The processors send the necessary data to the relays and, if those detect any abnormality in the system, operate the opening command of the branch circuit breakers to isolate where the fault. Therefore, it is essential to better understand the operation of such equipment, as well as the overall system. This work aims to study the main substation equipment, current transformers and potential and, especially, protection relays, in order to obtain the advantages that automated systems can provide
Resumo:
Brazil is nowadays the greatest bet of investors for the future due to its stable economy growth. The country has grown side by side with the greatest demand for electrical energy. The international appeal for renewable sources is causing a change in the Brazilian energetic matrix, raising the amount of energy generated by thermoelectric power plants. The construction of new power plants, running on biomass, requires a crescent number of capacitated personnel to run them. The Faculdade de Engenharia de Guaratinguetá – UNESP – has a steam laboratory; witch is deactivated, which has a thermoelectric plant of small capacity. The laboratory reactivation and the return of its activities can be an important tool in order to graduate engineer able to operate on such units. This paper proposes four new experiments to be simulated on the Collage’s Energy Dep. Steam Lab when it gets back to its educational activities
Resumo:
The discussions about the energy rationalization are gaining more and more space on the everyday of engineers and other professionals in the field of energy. A greater focus is being tied to commercial buildings, because they are one of the biggest responsible for the high energetic expenditure according to the National Energetic Balance, especially by the use of air conditioners for the people’s thermal comfort. Such finding made INMETRO to develop a building labeling procedure through th National Program of Electric Energy Conservation in Buildings; by means of this systematic, the built areas are classified by levels that go from A(the best) to E(the worst), taking into account envelopment, illumination system and air conditioning. A bonus process based on water rationalization, use of renewable energy sources, cogeneration systems or technical innovations, allows the classification to be changed up to one level. A study made exactly on a commercial building, the building of Foundation for Technological and Scientific Development located inside of the College of Engineering of Guaratinguetá, sought to identify technical/economic alternatives for the building certification and appealed to the bonus based on water rationalization. The present study is based on analysis of deploying a cogeneration system formed by internal combustion engine and an absorption refrigeration system as bonus alternative, so that the costs are analyzed regarding energy consumption and use of the motor. With the calculations and results, the viability of the building to receive a bonus from INMETRO through its National Program for Energy Conservation in Buildings is studied and concluded from this study whether or not you can get a better level of energy efficiency for the building in question... (Complete abstract click electronic access below)
Resumo:
Diante dos preocupantes problemas ambientais causados ao nosso planeta, sabe-se que a sua maioria está relacionada ao uso abundante e inconsequente dos recursos naturais, e que estes problemas são consequência direta da intervenção humana nos diferentes ecossistemas da Terra, causando desequilíbrios no meio ambiente e comprometendo a qualidade de vida. No Brasil, aproximadamente 40% da extração de recursos naturais têm como objetivo a indústria da construção. Sabe-se que 50% da energia gerada é para abastecer somente o funcionamento das edificações e 50% dos resíduos sólidos urbanos vêm das construções e demolições, os chamados “entulhos”. Frente a isso, profissionais começaram a pensar em alternativas para utilizar cada vez menos energia proveniente de combustíveis fósseis não renováveis, como os arquitetos que passaram a estudar os princípios bioclimáticos para reduzir as necessidades energéticas das edificações e assegurar o conforto com métodos construtivos ecológicos. Tendo em vista a importância da Sustentabilidade para o mundo em que vivemos, este trabalho consiste no projeto de uma edificação independente do uso de combustíveis fósseis e de energias geradas por fontes que agridem o meio ambiente. A proposta se baseia no projeto sustentável de um Centro Comunitário para os bairros Morada do Sol e Belo Galindo, em Presidente Prudente, SP
Resumo:
The treatment of domestic and industrial effluents through Wastewater Treatment Plants (WTPs) generates a residue termed sewage sludge, rich in organic matter, high-volume, occasionally containing pathogens and heavy metals. The sludge generation can minimize the benefits brought by the treatment of sewage, because this residue does not always receive appropriate treatment before final disposal. The disposal is another problem related to sludge. Landfills generally does not have physical space and alternatives such as the use in agriculture requires an intense treatment that could be in many cases operational or economic unfeasible. The objective of this work is the theoretical research about the processes of stabilization of the sludge by anaerobic digestion and the methanogenic activity during the process. Through analysis of each step and contemplating each relevant factor in anaerobic digestion process in order to optimize them, we proposed a theoretical model of reactors capable of stabilize the sludge, reduce its volume and eliminate pathogens. The obtained configuration consists of two anaerobic reactors connected in series. The first one operates in the range mesophilic temperature (35 ° C) and has higher hydraulic retention time (25 days) working primarily in the stabilization of organic matter present in the sludge and producing biogas, whereas the second one operates in the thermophilic range (55 ° C) in order to eliminate pathogens, and to reduce the volume. The hydraulic retention time in the second reactor is lower (10 days). Both mesophilic and thermophilic processes were efficient in what was proposed, promoting the stabilization of organic matter present in the sludge and significant reduction of pathogens. As a final step with the sludge previously digested, it is indicated a final dehydration... (Complete abstract click electronic access below)
Resumo:
With the imposition of the suspension of production and subsequent banning of incandescent light bulbs will be necessary to replace it by other more energy-efficient. Although the main alternative is the compact fluorescent lamp, the environmental impact caused by it due to incorrect disposal and the amount of harmonics included in the network resulting in losses related to the quality of electric power system makes them sought new alternatives for lighting systems that are efficient and have low environmental impact. In this context, the LED (Lighting Emitting Diode), based on solid-state components, is presented as an option for new projects and replacement of existing lighting. In this work we studied aspects of energy, environmental and economic impacts of a possible replacement of conventional lighting systems for new technology. From laboratory tests and surveys of the costs of different types of lamps used for residential lighting, we performed a comparative analysis considering energy and economic aspects which showed that the LED technology, but has a high initial investment, it is best when power quality and environmental preservation are relevant factors in decision making for the choice of technology to be used in the lighting system
Resumo:
Ce document présente l'analyse de la qualité de l'énergie dans une centrale solaire photovoltaïque - avec une capacité installée de 1 MWpico, relié au réseau de distribution d’électricité en 11,9 kV, qui a comme but connaître et également de comparer à la norme nationale actuelle, les effets de la qualité de l'énergie électrique résultant de l'utilisation de cette type matrice génératrice. Le rapport a été basé sur des niveaux spécifiés dans le module 8 des Procédures de distribution d'électricité dans le réseau national d'électricité - PRODIST, qui précise les directrices sur la question de la qualité de l'énergie électrique sur le territoire brésilien. Il a été considéré aussi les recommandations internationales 929 et 1547, qui proposent des pratiques recommandées concernant des systèmes de génération de l'énergie solaire PV (photovoltaïque), et également des normes pour le raccordement de ces types de sources au réseau de distributions d'électricité, tous deux établis par l'Institut des ingénieurs électriciens et électroniciens, largement connu comme IEEE. Le développement et le travail sur le terrain a eu lieu de manière continué, et non dans des moments spécifiques, assurant de cette manière, la fiabilité des données obtenues